€4,350.00Regular price-€450.00€4,800.00Price
Special Products
Featured Products
Harvesting and production
Royal jelly collection and production
The 2 side Beehives are 10-frame Dadant Blatt, in which live 2 "normal" families with queens, while in the central 5-frame Beehive lives an orphan family which receives from the 2 side families through the partitions formed by queen excluders, abundant young bees to raise royal cells.
€320.00Price
The 2 side Beehives are 10-frame Dadant Blatt, in which live 2 "normal" families with queens, while in the central 5-frame Beehive lives an orphan family which receives from the 2 side families through the partitions formed by queen excluders, abundant young bees to raise royal cells.
€320.00Price
€320.00Price
3-compartment Beehive box for royal jelly production or queen bee rearing with fixed anti-varroa bottom. Including two baffles with queen excluders to divide the compartments Excluding frames External dimensions: 114.5 x 62.2 x 47.6 cm
€320.00Price
3-compartment Beehive box for royal jelly production or queen bee rearing with fixed anti-varroa bottom. Including two baffles with queen excluders to divide the compartments Excluding frames External dimensions: 114.5 x 62.2 x 47.6 cm
3-compartment Beehive box for royal jelly production or queen bee rearing with fixed anti-varroa bottom. Including two baffles with queen excluders to divide the compartments Excluding frames External dimensions: 114.5 x 62.2 x 47.6 cm
€320.00Price
Consisting of 1 10-frame Beehive Dadant Blatt, in which lives 1 "normal" family with queen, and another 5-frame Beehive, in which lives an orphan family which receives from the other family, through the dividing wall with queen excluder, abundant young bees to raise royal cells.
€195.00Price
Consisting of 1 10-frame Beehive Dadant Blatt, in which lives 1 "normal" family with queen, and another 5-frame Beehive, in which lives an orphan family which receives from the other family, through the dividing wall with queen excluder, abundant young bees to raise royal cells.
€195.00Price
€195.00Price
Beehive box with 2 compartments for producing royal jelly or raising queen bees. With fixed antivarroa bottom, 2 hive covers, 1 diaphragm with queen excluder to divide the compartments. Frames NOT included Dimensions: 69 x 55 x H 50 cm -Weight 26 kg
€195.00Price
Beehive box with 2 compartments for producing royal jelly or raising queen bees. With fixed antivarroa bottom, 2 hive covers, 1 diaphragm with queen excluder to divide the compartments. Frames NOT included Dimensions: 69 x 55 x H 50 cm -Weight 26 kg
Beehive box with 2 compartments for producing royal jelly or raising queen bees. With fixed antivarroa bottom, 2 hive covers, 1 diaphragm with queen excluder to divide the compartments. Frames NOT included Dimensions: 69 x 55 x H 50 cm -Weight 26 kg
€195.00Price
€58.00Price
This mobile stand provides the best view of the honeycomb to allow the beekeeper to operate with ease when selecting and transporting the larvae that will become queens. It is advisable to use a lamp with a magnifying glass to better illuminate the frame (code HY L009)
€58.00Price
This mobile stand provides the best view of the honeycomb to allow the beekeeper to operate with ease when selecting and transporting the larvae that will become queens. It is advisable to use a lamp with a magnifying glass to better illuminate the frame (code HY L009)
This mobile stand provides the best view of the honeycomb to allow the beekeeper to operate with ease when selecting and transporting the larvae that will become queens. It is advisable to use a lamp with a magnifying glass to better illuminate the frame (code HY L009)
€58.00Price
€7.80Price
WOODEN CARDBOARD with feeder - with 4 removable slats
€7.80Price
WOODEN CARDBOARD with feeder - with 4 removable slats
WOODEN CARDBOARD with feeder - with 4 removable slats
€7.80Price
€8.00Price
STECCA WITh FIXING BLOCKS fOR FOLLOWING KINGDOMS No. 9 MOUNTED FIXING BLOCKS SUITABLE FOR MOUNTING ON A CARRYING CANVAS (Code PI 47)
€8.00Price
STECCA WITh FIXING BLOCKS fOR FOLLOWING KINGDOMS No. 9 MOUNTED FIXING BLOCKS SUITABLE FOR MOUNTING ON A CARRYING CANVAS (Code PI 47)
STECCA WITh FIXING BLOCKS fOR FOLLOWING KINGDOMS No. 9 MOUNTED FIXING BLOCKS SUITABLE FOR MOUNTING ON A CARRYING CANVAS (Code PI 47)
€8.00Price
€8.00Price
STECCA WITH BARS OF CUPOLINS - No. 3 BARS OF 11 CUPOLINS FOR REAL PAPA FIT TO MOUNT ON CANVAS HOLDER (Code PI 47)
€8.00Price
STECCA WITH BARS OF CUPOLINS - No. 3 BARS OF 11 CUPOLINS FOR REAL PAPA FIT TO MOUNT ON CANVAS HOLDER (Code PI 47)
STECCA WITH BARS OF CUPOLINS - No. 3 BARS OF 11 CUPOLINS FOR REAL PAPA FIT TO MOUNT ON CANVAS HOLDER (Code PI 47)
€8.00Price
- Possibility of inserting up to 5 slats (STECCA Cod. QI S144)
€13.80Price
- Possibility of inserting up to 5 slats (STECCA Cod. QI S144)
€13.80Price
€13.80Price
CUE HOLDER with feeder - STAINLESS steel frame - Removable stainless steel splints - 1 L plastic feeder with drowning-saving net - No. 3 stainless steel splints easy to attach to the splint holder - The splint has a guide for inserting NICOT's NICOT holder fixing blocks (Code HY G-0007) NOT INCLUDED
€13.80Price
CUE HOLDER with feeder - STAINLESS steel frame - Removable stainless steel splints - 1 L plastic feeder with drowning-saving net - No. 3 stainless steel splints easy to attach to the splint holder - The splint has a guide for inserting NICOT's NICOT holder fixing blocks (Code HY G-0007) NOT INCLUDED
CUE HOLDER with feeder - STAINLESS steel frame - Removable stainless steel splints - 1 L plastic feeder with drowning-saving net - No. 3 stainless steel splints easy to attach to the splint holder - The splint has a guide for inserting NICOT's NICOT holder fixing blocks (Code HY G-0007) NOT INCLUDED
€13.80Price
€4.50Price
Cup holder splint Stainless steel splint with slot for inserting plastic cupolas Possibility of inserting 35 cupolas (not included) Its special shape, allows it to hold the cupola without the use of supports.The cupola can be fixed with wax for greater stability (TO BE MOUNTED ON THE CUP MOUNTING FRAME Cod. QI T09)
€4.50Price
Cup holder splint Stainless steel splint with slot for inserting plastic cupolas Possibility of inserting 35 cupolas (not included) Its special shape, allows it to hold the cupola without the use of supports.The cupola can be fixed with wax for greater stability (TO BE MOUNTED ON THE CUP MOUNTING FRAME Cod. QI T09)
Cup holder splint Stainless steel splint with slot for inserting plastic cupolas Possibility of inserting 35 cupolas (not included) Its special shape, allows it to hold the cupola without the use of supports.The cupola can be fixed with wax for greater stability (TO BE MOUNTED ON THE CUP MOUNTING FRAME Cod. QI T09)
€4.50Price
€2.80Price
"CHINESE" PICKING-LARVE PICKING with plastic sub-tip for royal jelly production
€2.80Price
"CHINESE" PICKING-LARVE PICKING with plastic sub-tip for royal jelly production
"CHINESE" PICKING-LARVE PICKING with plastic sub-tip for royal jelly production
€2.80Price
€2.20Price
Wooden stick with flat rubber ends for convenient royal jelly withdrawal.LengthLength 16.5 cm.
€2.20Price
Wooden stick with flat rubber ends for convenient royal jelly withdrawal.LengthLength 16.5 cm.
Wooden stick with flat rubber ends for convenient royal jelly withdrawal.LengthLength 16.5 cm.
€2.20Price
€5.00Price
Grafting And Royal Jelly Harvesting Spoon Premium, double point
€5.00Price
Grafting And Royal Jelly Harvesting Spoon Premium, double point
Grafting And Royal Jelly Harvesting Spoon Premium, double point
€5.00Price
€1.40Price
With soft rim for collecting royal jelly on one end, and spoon for extracting larvae on the other.
€1.40Price
With soft rim for collecting royal jelly on one end, and spoon for extracting larvae on the other.
With soft rim for collecting royal jelly on one end, and spoon for extracting larvae on the other.
€1.40Price
Royal Jelly ASPIRATOR with membrane pump- continuous use Stainless steel storage case, polycarbonate handle, stainless steel locking hook and tool compartment. Lighted star /stop switch. Food grade silicone tubing and food grade rubber exchange cap. Glass jar. Motor with MEMBRANE pump for CONTINUOUS USE. Dimensions: 32 x 23 x 17 cm. Case: blue-colored shockproof material exterior, stainless steel inner part Suction power: 40 liters/hour Parts supplied Transparent hose Suction nozzle Browned bottle 150 ml. Sealing cap Description of the operating principle of the vacuum cleaner -Case with opening from the top -Browned glass bottle -Hermetic plug -Rubber plug complete with fitting and connecting hoses Once the machine is prepared to be operational (as stated in the section "Safety and Installation Prescription"), the machine is energized. This allows the motor, which acts as a vacuum pump by means of the jarbrunate, to start operating. Suction is by means of the small plastic tube located at the end of the plug. Safety and installation prescriptions 1)Connect the plug to the mains (220V); or Suttorgel Field (12V); 2)Set the switch to zero (off); 3)Connect the quick connection of the chosen cap to the device by short rotation; 4)Apply the chosen stopper to the flask making sure, by gentle rotary pressure, that a perfect seal is ensured; 5)Turn on the switch and proceed to aspiration; 6)When you have finished aspiration, remove the rubber stopper and hermetically seal the flask by immediately placing it in the refrigerator. Please note that royal jelly can be stored long intact away from light tightly closed and at a temperature of 12°C. Possible inconveniences and their solutions 1)THE APPLIANCE DOES NOT START: check that the terminals are plugged into the power supply (12V battery or electric current) 2)THE APPLIANCE STARTS BUT DOES NOT SUCK: check that the level of royal jelly in the jar has not risen and overflowed into the suction tube. If so, disassemble the aspirator and clean the tubing up to the vacuum pump. For other eventualities, contact the manufacturer or retailer. instructions in pdf
€360.00Price
Royal Jelly ASPIRATOR with membrane pump- continuous use Stainless steel storage case, polycarbonate handle, stainless steel locking hook and tool compartment. Lighted star /stop switch. Food grade silicone tubing and food grade rubber exchange cap. Glass jar. Motor with MEMBRANE pump for CONTINUOUS USE. Dimensions: 32 x 23 x 17 cm. Case: blue-colored shockproof material exterior, stainless steel inner part Suction power: 40 liters/hour Parts supplied Transparent hose Suction nozzle Browned bottle 150 ml. Sealing cap Description of the operating principle of the vacuum cleaner -Case with opening from the top -Browned glass bottle -Hermetic plug -Rubber plug complete with fitting and connecting hoses Once the machine is prepared to be operational (as stated in the section "Safety and Installation Prescription"), the machine is energized. This allows the motor, which acts as a vacuum pump by means of the jarbrunate, to start operating. Suction is by means of the small plastic tube located at the end of the plug. Safety and installation prescriptions 1)Connect the plug to the mains (220V); or Suttorgel Field (12V); 2)Set the switch to zero (off); 3)Connect the quick connection of the chosen cap to the device by short rotation; 4)Apply the chosen stopper to the flask making sure, by gentle rotary pressure, that a perfect seal is ensured; 5)Turn on the switch and proceed to aspiration; 6)When you have finished aspiration, remove the rubber stopper and hermetically seal the flask by immediately placing it in the refrigerator. Please note that royal jelly can be stored long intact away from light tightly closed and at a temperature of 12°C. Possible inconveniences and their solutions 1)THE APPLIANCE DOES NOT START: check that the terminals are plugged into the power supply (12V battery or electric current) 2)THE APPLIANCE STARTS BUT DOES NOT SUCK: check that the level of royal jelly in the jar has not risen and overflowed into the suction tube. If so, disassemble the aspirator and clean the tubing up to the vacuum pump. For other eventualities, contact the manufacturer or retailer. instructions in pdf
€360.00Price
€360.00Price
PNEUMATIC ASPIRATOR " Suttorgel" to suck up royal jelly from the domes using the depression techniquePower supply 220V-50 Hz Optionally to power the "Suttorgel" from 12V= with cigarette lighter car batteries INVERTER (art. HY S0022)converts 12V= to 220V/50Hz
€360.00Price
PNEUMATIC ASPIRATOR " Suttorgel" to suck up royal jelly from the domes using the depression techniquePower supply 220V-50 Hz Optionally to power the "Suttorgel" from 12V= with cigarette lighter car batteries INVERTER (art. HY S0022)converts 12V= to 220V/50Hz
PNEUMATIC ASPIRATOR " Suttorgel" to suck up royal jelly from the domes using the depression techniquePower supply 220V-50 Hz Optionally to power the "Suttorgel" from 12V= with cigarette lighter car batteries INVERTER (art. HY S0022)converts 12V= to 220V/50Hz
€360.00Price
€75.00Price
INVERTER POWER SUPPLY INPUT 12V= (VEHICLES' CIGAR LIGHTER SOCKET) - OUTPUT at 220 V - 50 Hz with UNIVERSAL EUROPEAN SOCKET POWER : 300 W at inrush - 150 W continuous ELECTRICAL SAFETY PROTECTION (fuses).
€75.00Price
INVERTER POWER SUPPLY INPUT 12V= (VEHICLES' CIGAR LIGHTER SOCKET) - OUTPUT at 220 V - 50 Hz with UNIVERSAL EUROPEAN SOCKET POWER : 300 W at inrush - 150 W continuous ELECTRICAL SAFETY PROTECTION (fuses).
INVERTER POWER SUPPLY INPUT 12V= (VEHICLES' CIGAR LIGHTER SOCKET) - OUTPUT at 220 V - 50 Hz with UNIVERSAL EUROPEAN SOCKET POWER : 300 W at inrush - 150 W continuous ELECTRICAL SAFETY PROTECTION (fuses).
€75.00Price
€355.00Price
ASPIRATOR for royal jelly 12V power supply=With diaphragm pumpContinuous use without stopping for possible pump overheatingSilicone tubesStainless steel spout to insert into the domesA glass jar with capStainless steel case
€355.00Price
ASPIRATOR for royal jelly 12V power supply=With diaphragm pumpContinuous use without stopping for possible pump overheatingSilicone tubesStainless steel spout to insert into the domesA glass jar with capStainless steel case
ASPIRATOR for royal jelly 12V power supply=With diaphragm pumpContinuous use without stopping for possible pump overheatingSilicone tubesStainless steel spout to insert into the domesA glass jar with capStainless steel case
€355.00Price
€345.00Price
ASPIRATOR for royal jelly 12V power supply=With diaphragm pumpContinuous use without stopping for possible pump overheatingSilicone tubesStainless steel nozzle to insert into the domesA glass jar with capStainless steel case
€345.00Price
ASPIRATOR for royal jelly 12V power supply=With diaphragm pumpContinuous use without stopping for possible pump overheatingSilicone tubesStainless steel nozzle to insert into the domesA glass jar with capStainless steel case
ASPIRATOR for royal jelly 12V power supply=With diaphragm pumpContinuous use without stopping for possible pump overheatingSilicone tubesStainless steel nozzle to insert into the domesA glass jar with capStainless steel case
€345.00Price
€13.00Price
Replacement stainless steel tip for royal jelly aspirators (QI Code A13) and (QI Code A55) to be inserted into the domes For use with silicone tubing (not included)
€13.00Price
Replacement stainless steel tip for royal jelly aspirators (QI Code A13) and (QI Code A55) to be inserted into the domes For use with silicone tubing (not included)
Replacement stainless steel tip for royal jelly aspirators (QI Code A13) and (QI Code A55) to be inserted into the domes For use with silicone tubing (not included)
€13.00Price
Avoids eye fatigue: thanks to the integration of optical elements, it perfectly combines the natural cold, shadow-free light source with the optical function of the lens. Equipped with 11 W circular tube lamp (220 V 4 PIN attachment) with luminescent power that increases brightness up to 150% and saves up to 80% electricity
€29.50Price
Avoids eye fatigue: thanks to the integration of optical elements, it perfectly combines the natural cold, shadow-free light source with the optical function of the lens. Equipped with 11 W circular tube lamp (220 V 4 PIN attachment) with luminescent power that increases brightness up to 150% and saves up to 80% electricity
€29.50Price
€29.50Price
Table lamp that allows magnification of larvae under the lens up to 3-10 times, providing a sharp view. Flexible mechanical arm and universal wide-angle lens allow quick and easy use of the lamp Made of shockproof material
€29.50Price
Table lamp that allows magnification of larvae under the lens up to 3-10 times, providing a sharp view. Flexible mechanical arm and universal wide-angle lens allow quick and easy use of the lamp Made of shockproof material
Table lamp that allows magnification of larvae under the lens up to 3-10 times, providing a sharp view. Flexible mechanical arm and universal wide-angle lens allow quick and easy use of the lamp Made of shockproof material
€29.50Price
€5.00Price
Magnifying glass, allows magnification ensuring sharp vision. Black color ABS handle. Avoids eye fatigue - Diameter 5 cm / 6 magnification - Diameter 6.5 cm / 6 magnification - Diameter 7.5 cm / 5 magnification - Diameter 9 cm / 3 magnification - Diameter 10 cm / 2 magnification
€5.00Price
Magnifying glass, allows magnification ensuring sharp vision. Black color ABS handle. Avoids eye fatigue - Diameter 5 cm / 6 magnification - Diameter 6.5 cm / 6 magnification - Diameter 7.5 cm / 5 magnification - Diameter 9 cm / 3 magnification - Diameter 10 cm / 2 magnification
Magnifying glass, allows magnification ensuring sharp vision. Black color ABS handle. Avoids eye fatigue - Diameter 5 cm / 6 magnification - Diameter 6.5 cm / 6 magnification - Diameter 7.5 cm / 5 magnification - Diameter 9 cm / 3 magnification - Diameter 10 cm / 2 magnification
€5.00Price