€4,350.00Regular price-€450.00€4,800.00Price
Special Products
Featured Products
Beekeeping equipment
Here you can find a very rich list of products and equipment, aimed at both the small hobbyist beekeeper and a professional beekeeper. we have selected products from the best brands and made from the best materials.
Subcategory
Read also the story (SEE DOWNLOAD) of a friendship, where The 200-million-year-old Bee unites, while the much younger Human Soul, first builds and then destroys. The events took place in the period of the "Ventennio" in Valtellina (Talamona) in which a friendship sustained by a passion for beekeeping, through an intertwining of selfishness, rivalry, power and interests turns into tragedy. Even now a century later, the tale of events is romanticized and handed down by the Talamona people. Publication collected and granted by Giampaolo Palmieri historical documentarian of APAS (Sondrio Association of Beekeepers)
Read also the story (SEE DOWNLOAD) of a friendship, where The 200-million-year-old Bee unites, while the much younger Human Soul, first builds and then destroys. The events took place in the period of the "Ventennio" in Valtellina (Talamona) in which a friendship sustained by a passion for beekeeping, through an intertwining of selfishness, rivalry, power and interests turns into tragedy. Even now a century later, the tale of events is romanticized and handed down by the Talamona people. Publication collected and granted by Giampaolo Palmieri historical documentarian of APAS (Sondrio Association of Beekeepers)
ETTORE LIBRINA'S "PRACTICAL GUIDE to Rational Beekeeping" is a rare historical document (1922), written with rare expertise, with very well-detailed descriptions and illustrations for the time, whose content is of high historical value. In the "PRACTICAL GUIDE" (SEE ATTACHED DOCUMENTS) there are very innovative concepts and explanations for the period it was written, still valid today !
ETTORE LIBRINA'S "PRACTICAL GUIDE to Rational Beekeeping" is a rare historical document (1922), written with rare expertise, with very well-detailed descriptions and illustrations for the time, whose content is of high historical value. In the "PRACTICAL GUIDE" (SEE ATTACHED DOCUMENTS) there are very innovative concepts and explanations for the period it was written, still valid today !
ETTORE LIBRINA'S "PRACTICAL GUIDE to Rational Beekeeping" is a rare historical document (1922), written with rare expertise, with very well-detailed descriptions and illustrations for the time, whose content is of high historical value. In the "PRACTICAL GUIDE" (SEE ATTACHED DOCUMENTS) there are very innovative concepts and explanations for the period it was written, still valid today !
FOGGER FOG-B (See in full manual DOWNLOAD) Important: Please read the following instructions carefully It is important to read all instructions before connecting the nebulizer to the LPG cylinder and before handling the unit, to familiarize yourself with it. Keep these instructions for future reference
€315.00Price
FOGGER FOG-B (See in full manual DOWNLOAD) Important: Please read the following instructions carefully It is important to read all instructions before connecting the nebulizer to the LPG cylinder and before handling the unit, to familiarize yourself with it. Keep these instructions for future reference
€315.00Price
€315.00Price
FOGGER "type FOG-B " Supplied: Body with 500-mL clear plastic reservoir-Replacement plastic reservoir-Extension-gas lighter-Keys for maintenance For the ANEL-FOGB type nebulizer, use only the "Campingaz" type camping gas bottle MIX BUTANE/PROPANE 70% Butane-30% Propane 170 g CG1750 (BOTTLE NOT INCLUDED)
€315.00Price
FOGGER "type FOG-B " Supplied: Body with 500-mL clear plastic reservoir-Replacement plastic reservoir-Extension-gas lighter-Keys for maintenance For the ANEL-FOGB type nebulizer, use only the "Campingaz" type camping gas bottle MIX BUTANE/PROPANE 70% Butane-30% Propane 170 g CG1750 (BOTTLE NOT INCLUDED)
FOGGER "type FOG-B " Supplied: Body with 500-mL clear plastic reservoir-Replacement plastic reservoir-Extension-gas lighter-Keys for maintenance For the ANEL-FOGB type nebulizer, use only the "Campingaz" type camping gas bottle MIX BUTANE/PROPANE 70% Butane-30% Propane 170 g CG1750 (BOTTLE NOT INCLUDED)
€315.00Price
The principle of its operation is the vaporization of acaricide product inside a stainless steel coil made red-hot by a gas burner. By pressing and releasing the feed pump button, the product mixed with kerosene oil is taken from the tank and forced into the red-hot coil where it evaporates immediately and exits under pressure through the nozzle. Each vaporized dispensing takes no more than 2 seconds of time. By introducing the ferret nozzle inside the Beehive's small door and pressing the button, the dose needed for a treatment is administered. Heating of the coil is achieved by a burner fed by a camping-gas cartridge. The substances that can be sprayed are the same as those traditionally used in acaricide and bactericide treatments (e.g., thymol). These substances should always be diluted with kerosene oil or demineralized petroleum.(Not suitable for use with oxalic acid!) It is recommended that the coil be emptied and the unit thoroughly cleaned after EACH use, BEFORE turning it off in order to avoid clogging the coil and sprayer. To do this, remove the yellow canister and press the dispenser button repeatedly until the pump is empty and no spray is still coming out, at which point it is advisable to do a few pumps with only diluent without medicine; then close the gas nozzle.During this operation, move the Ferret to different positions in order to get all the fluid left in the coil out. It is also recommended to disassemble and clean the sprayer frequently. INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE By pressing and releasing the button, the product is sent to the coil, where it vaporizes instantaneously by escaping from the sprayer as a vaporous cloud and entering the Beehive. Each vaporized dispensing takes no more than 2 seconds to complete. Steam moisture is determined by the frequency of pumping; pumping at 5-second intervals is recommended. To put in the butane cartridge make sure the regulator is tightly closed; unscrew the red container , insert the cartridge into it and screw it all the way back in. Fill the yellow container with the liquid needed for treatment by filtering it if there is any impurity, then screw the container tightly to the handle. Place the ferret on a flat surface, light a match by bringing it close to the metal guard open the gas valve using the gas regulator. Ignition should occur immediately. Allow the device to preheat for about 2 minutes. Then start the treatment. When the steam becomes moist, stop pumping by letting it escape on its own, then press the button at longer intervals. When the treatment is finished, remove the yellow container, press the dispenser button until the pump is empty and no more spray comes out, then close the gas nozzle. IMPORTANT IMPORTANT Always mount the butane cartridge away from flames or heat sources, replacement can only take place when the cartridge in use is completely empty. The ferret runs on butane gas, in 190-gram cartridges.
€315.00Price
The principle of its operation is the vaporization of acaricide product inside a stainless steel coil made red-hot by a gas burner. By pressing and releasing the feed pump button, the product mixed with kerosene oil is taken from the tank and forced into the red-hot coil where it evaporates immediately and exits under pressure through the nozzle. Each vaporized dispensing takes no more than 2 seconds of time. By introducing the ferret nozzle inside the Beehive's small door and pressing the button, the dose needed for a treatment is administered. Heating of the coil is achieved by a burner fed by a camping-gas cartridge. The substances that can be sprayed are the same as those traditionally used in acaricide and bactericide treatments (e.g., thymol). These substances should always be diluted with kerosene oil or demineralized petroleum.(Not suitable for use with oxalic acid!) It is recommended that the coil be emptied and the unit thoroughly cleaned after EACH use, BEFORE turning it off in order to avoid clogging the coil and sprayer. To do this, remove the yellow canister and press the dispenser button repeatedly until the pump is empty and no spray is still coming out, at which point it is advisable to do a few pumps with only diluent without medicine; then close the gas nozzle.During this operation, move the Ferret to different positions in order to get all the fluid left in the coil out. It is also recommended to disassemble and clean the sprayer frequently. INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE By pressing and releasing the button, the product is sent to the coil, where it vaporizes instantaneously by escaping from the sprayer as a vaporous cloud and entering the Beehive. Each vaporized dispensing takes no more than 2 seconds to complete. Steam moisture is determined by the frequency of pumping; pumping at 5-second intervals is recommended. To put in the butane cartridge make sure the regulator is tightly closed; unscrew the red container , insert the cartridge into it and screw it all the way back in. Fill the yellow container with the liquid needed for treatment by filtering it if there is any impurity, then screw the container tightly to the handle. Place the ferret on a flat surface, light a match by bringing it close to the metal guard open the gas valve using the gas regulator. Ignition should occur immediately. Allow the device to preheat for about 2 minutes. Then start the treatment. When the steam becomes moist, stop pumping by letting it escape on its own, then press the button at longer intervals. When the treatment is finished, remove the yellow container, press the dispenser button until the pump is empty and no more spray comes out, then close the gas nozzle. IMPORTANT IMPORTANT Always mount the butane cartridge away from flames or heat sources, replacement can only take place when the cartridge in use is completely empty. The ferret runs on butane gas, in 190-gram cartridges.
€315.00Price
€315.00Price
VAPORIZER complete type "FURETTO" Gas heating Fumigator apparatus of acaricidal substances against varroa by means of gas heating, for curative treatment of bees. (GAS CARTRIDGE NOT INCLUDED)
€315.00Price
VAPORIZER complete type "FURETTO" Gas heating Fumigator apparatus of acaricidal substances against varroa by means of gas heating, for curative treatment of bees. (GAS CARTRIDGE NOT INCLUDED)
VAPORIZER complete type "FURETTO" Gas heating Fumigator apparatus of acaricidal substances against varroa by means of gas heating, for curative treatment of bees. (GAS CARTRIDGE NOT INCLUDED)
€315.00Price
€0.70Price
FLACON : 10 ml - Ø 24.1 mm - h 63.2 mm - Mouth GL 18 Packed in thermopack of 170 pieces - See Quantity Discount ACCESSORIES : GLASS CONTAINER 10 ml (SI GL 1810) CLOSING CAPSULE with SEAL (SI CS18) MOUTH RASO CONTAINER (SI CRB 18)
€0.70Price
FLACON : 10 ml - Ø 24.1 mm - h 63.2 mm - Mouth GL 18 Packed in thermopack of 170 pieces - See Quantity Discount ACCESSORIES : GLASS CONTAINER 10 ml (SI GL 1810) CLOSING CAPSULE with SEAL (SI CS18) MOUTH RASO CONTAINER (SI CRB 18)
FLACON : 10 ml - Ø 24.1 mm - h 63.2 mm - Mouth GL 18 Packed in thermopack of 170 pieces - See Quantity Discount ACCESSORIES : GLASS CONTAINER 10 ml (SI GL 1810) CLOSING CAPSULE with SEAL (SI CS18) MOUTH RASO CONTAINER (SI CRB 18)
€0.70Price
The laminated cards depict exactly what a beekeeper finds when opening a Beehive: photos of combs well covered by bees. Also featured is a honeycomb with the queen, a honeycomb with real cells, and side combs with honey and pollen supplies. The kit contains both nest and Honey super honeycomb photos The photographic print quality is excellent to achieve a realistic effect.The cards are made of thick cardboard and are laminated so that they will stand the test of time from various demonstrations or lessons
€128.00Price
The laminated cards depict exactly what a beekeeper finds when opening a Beehive: photos of combs well covered by bees. Also featured is a honeycomb with the queen, a honeycomb with real cells, and side combs with honey and pollen supplies. The kit contains both nest and Honey super honeycomb photos The photographic print quality is excellent to achieve a realistic effect.The cards are made of thick cardboard and are laminated so that they will stand the test of time from various demonstrations or lessons
€128.00Price
€128.00Price
Photo series in laminated cards, printed in color. FOR DADACTICS The cards are then applied to both sides of a nest or honeycomb frame by means of thumbtacks or double-sided tape (frames not included) - KIT of 38 cards per 10-frame Beehive with 10+10 nest and 9+9 honeycomb frames - KIT includes prints only, does not include frames, hive or wax.
€128.00Price
Photo series in laminated cards, printed in color. FOR DADACTICS The cards are then applied to both sides of a nest or honeycomb frame by means of thumbtacks or double-sided tape (frames not included) - KIT of 38 cards per 10-frame Beehive with 10+10 nest and 9+9 honeycomb frames - KIT includes prints only, does not include frames, hive or wax.
Photo series in laminated cards, printed in color. FOR DADACTICS The cards are then applied to both sides of a nest or honeycomb frame by means of thumbtacks or double-sided tape (frames not included) - KIT of 38 cards per 10-frame Beehive with 10+10 nest and 9+9 honeycomb frames - KIT includes prints only, does not include frames, hive or wax.
€128.00Price
REFRACTOMETERS ON REQUEST Code 01569 Beer Refractometer - €69.00 Art. RSG32-ATC 2-scale beer refractometer with automatic temperature compensation. Measuring scales: 0 - 32% Brix 1000 - 112 Cod. 01568 Refractometer For balsamic vinegar and alim. - 81.00 € Art. SBR 0080 REF F6 108 1-scale refractometer 0-80% Brix div. 0.5% Brix Cod. 01566 Refractometer for batteries and coolants - 79.00 € Art. 4600 REF 402 -50/+20 °C, 1.15-1.30 p.s., batteries and coolants. Generally used in the mechanical field to test the validity of batteries Item No. 01565 Refractometer REF. 302-0-12 g/dl 1000-10450 p.s.- Protein - 79.00 € Art. 4500 REF 302 -0-12 g/dl, 1000-1050 p.s., 1.3330-1.3600 IR Protein 3-scale clinical model: 0-12 g/dl = for protein concentration Cod. 01564 Refractometer REF. 301-0-12 g/dl 1000-1040 p.s.- Protein - 79.00 € Art. 4450 REF 301 -0-12 g/dl, 1000-1040 p.s.- Protein Suitable for measuring protein concentration and specific gravity of urine Cod. 01563 REFractometer SALINITY REF. 202-0-28% - 79.00 € Art. 4400 REF. 202 -0-28% SALINITY` Suitable for measuring salt content in seawater and prepared foods expressed as sodium chloride Cod. 01562 SALINITY Refractometer REF. 211-0-100for MILLE - 79.00 € Art. 4350 REF 211-0-100for MILLE SALINITY with automatic temperature compensation. Same as mod. 201 with automatic temperature compensation. 10 to 30°C Ref. 01561 SALINITY Refractometer REF. 201-0-100 per MILLE - 79.00 € Art. 4300 REF 201 -0-100 per MILLE SALINITY Suitable for measuring salt concentration in seawater and prepared foods. Measuring scale: 0-100 per thousand Art. No. 01560 Refractometer REF. 107-0-90% BRIX - 79.00 € Art. 4250 REF 107 -0-90% Brix (3 scales) This model has 3 scales. Suitable for all substances with wide concentration. Measuring scale: 0-90% Brix Art. No. 01558 Refractometer REF. 105-45-82% BRIX - €81.00 Art. 4150 REF. 105 -45-82% Brix Suitable for many uses. Fruit juices, condensed milk, jams, fruit preserves. Measuring scale: 45-82% Brix Art. No. 01557 Refractometer REF. 104-28-62% BRIX - 79.00 € Art. 4100 REF 104 -28-62% Brix This model is ideal for concentrated juices and foods in boxes containing sugar. No. 01556 Refractometer REF. 113-0-32% BRIX-ATC - €69.00 Art. 4050 REF 113 0-32% Brix-ATC Model same as Art. 103 with automatic temperature compensation. Temperature compensation. No. 01555 Refractometer REF. 103-0-32% BRIX - 69,00 € Art. 4000 REF 103 -0-32% Brix This is the most widely used model because of the width of the scale. Used for musts, beverages, ice cream, etc. Measuring scale: 0-32% Brix Item No. 01554 Refractometer REF. 102-0-18% BRIX - 69.00 € Art. 3950 REF. 102 -0-18% Brix Precision model suitable for low concentrations. Used for fruit juices, soft drinks, spirits Art. No. 01553 Refractometer REF. 111-0-10% BRIX-ATC - 69.00 € Art. 3900 REF 111 -0-10% Brix with automatic temperature compensation. Same model as Art. 101 with automatic temperature compensation Code 01552 Refractometer REF. 101-0-10% BRIX - 69.00 € Art. 3850 REF. 101 -0-10% Brix Precision model suitable for low concentrations. Used for fruit juices with low concentrations, cut oils, vegetable , corn, olive Cod. 01551 Refractometer OECSHLE BABO BRIX - 63,00 € Art. 711 Refractometer with automatic temperature compensation with 3 scales 0-140 OECSHLE 0-26 BABO 0-32 BRIX Cod. 01550 VOL/Baumé Refractometer - 69.00 € Art. 504 VOL/Baumé Refractometer with 2 Baumé scales and approximate alcoholic degree Measuring scale 0-25% vol 0-20% Baumé Accuracy 0.2% vol Cod. 01559 Refractometer Art. 4200 REF. 106 Model used for measuring the 3 indices of honey, namely : sugar content, beaume´ and water content. Refractometers ( Method of use ) MANUAL REFRACTOMETERS The refractive index of a liquid containing sugar or other soluble solids is proportional to its concentration.
€56.00Price
REFRACTOMETERS ON REQUEST Code 01569 Beer Refractometer - €69.00 Art. RSG32-ATC 2-scale beer refractometer with automatic temperature compensation. Measuring scales: 0 - 32% Brix 1000 - 112 Cod. 01568 Refractometer For balsamic vinegar and alim. - 81.00 € Art. SBR 0080 REF F6 108 1-scale refractometer 0-80% Brix div. 0.5% Brix Cod. 01566 Refractometer for batteries and coolants - 79.00 € Art. 4600 REF 402 -50/+20 °C, 1.15-1.30 p.s., batteries and coolants. Generally used in the mechanical field to test the validity of batteries Item No. 01565 Refractometer REF. 302-0-12 g/dl 1000-10450 p.s.- Protein - 79.00 € Art. 4500 REF 302 -0-12 g/dl, 1000-1050 p.s., 1.3330-1.3600 IR Protein 3-scale clinical model: 0-12 g/dl = for protein concentration Cod. 01564 Refractometer REF. 301-0-12 g/dl 1000-1040 p.s.- Protein - 79.00 € Art. 4450 REF 301 -0-12 g/dl, 1000-1040 p.s.- Protein Suitable for measuring protein concentration and specific gravity of urine Cod. 01563 REFractometer SALINITY REF. 202-0-28% - 79.00 € Art. 4400 REF. 202 -0-28% SALINITY` Suitable for measuring salt content in seawater and prepared foods expressed as sodium chloride Cod. 01562 SALINITY Refractometer REF. 211-0-100for MILLE - 79.00 € Art. 4350 REF 211-0-100for MILLE SALINITY with automatic temperature compensation. Same as mod. 201 with automatic temperature compensation. 10 to 30°C Ref. 01561 SALINITY Refractometer REF. 201-0-100 per MILLE - 79.00 € Art. 4300 REF 201 -0-100 per MILLE SALINITY Suitable for measuring salt concentration in seawater and prepared foods. Measuring scale: 0-100 per thousand Art. No. 01560 Refractometer REF. 107-0-90% BRIX - 79.00 € Art. 4250 REF 107 -0-90% Brix (3 scales) This model has 3 scales. Suitable for all substances with wide concentration. Measuring scale: 0-90% Brix Art. No. 01558 Refractometer REF. 105-45-82% BRIX - €81.00 Art. 4150 REF. 105 -45-82% Brix Suitable for many uses. Fruit juices, condensed milk, jams, fruit preserves. Measuring scale: 45-82% Brix Art. No. 01557 Refractometer REF. 104-28-62% BRIX - 79.00 € Art. 4100 REF 104 -28-62% Brix This model is ideal for concentrated juices and foods in boxes containing sugar. No. 01556 Refractometer REF. 113-0-32% BRIX-ATC - €69.00 Art. 4050 REF 113 0-32% Brix-ATC Model same as Art. 103 with automatic temperature compensation. Temperature compensation. No. 01555 Refractometer REF. 103-0-32% BRIX - 69,00 € Art. 4000 REF 103 -0-32% Brix This is the most widely used model because of the width of the scale. Used for musts, beverages, ice cream, etc. Measuring scale: 0-32% Brix Item No. 01554 Refractometer REF. 102-0-18% BRIX - 69.00 € Art. 3950 REF. 102 -0-18% Brix Precision model suitable for low concentrations. Used for fruit juices, soft drinks, spirits Art. No. 01553 Refractometer REF. 111-0-10% BRIX-ATC - 69.00 € Art. 3900 REF 111 -0-10% Brix with automatic temperature compensation. Same model as Art. 101 with automatic temperature compensation Code 01552 Refractometer REF. 101-0-10% BRIX - 69.00 € Art. 3850 REF. 101 -0-10% Brix Precision model suitable for low concentrations. Used for fruit juices with low concentrations, cut oils, vegetable , corn, olive Cod. 01551 Refractometer OECSHLE BABO BRIX - 63,00 € Art. 711 Refractometer with automatic temperature compensation with 3 scales 0-140 OECSHLE 0-26 BABO 0-32 BRIX Cod. 01550 VOL/Baumé Refractometer - 69.00 € Art. 504 VOL/Baumé Refractometer with 2 Baumé scales and approximate alcoholic degree Measuring scale 0-25% vol 0-20% Baumé Accuracy 0.2% vol Cod. 01559 Refractometer Art. 4200 REF. 106 Model used for measuring the 3 indices of honey, namely : sugar content, beaume´ and water content. Refractometers ( Method of use ) MANUAL REFRACTOMETERS The refractive index of a liquid containing sugar or other soluble solids is proportional to its concentration.
€56.00Price
€56.00Price
For measurement of the 3 indices of honey, i.e.: sugar content, beaume' and water content.Measuring scale: 58-90% Brix (prec. 0.5%)38-Be'-43-Be' (prec. 0.5%)12%-27% water (prec. 1%) Plastic box with pipette and screwdriver for calibration, autom. temper. compensation. , with bottle of dioptric oil and prism for calibration KIT REPLACEMENT GLASS WITH RING (Code RI T001)KIT REPLACEMENT DIOPTRIC OIL AND PRISM FOR CALIBRATION (Code RI 01572)
€56.00Price
For measurement of the 3 indices of honey, i.e.: sugar content, beaume' and water content.Measuring scale: 58-90% Brix (prec. 0.5%)38-Be'-43-Be' (prec. 0.5%)12%-27% water (prec. 1%) Plastic box with pipette and screwdriver for calibration, autom. temper. compensation. , with bottle of dioptric oil and prism for calibration KIT REPLACEMENT GLASS WITH RING (Code RI T001)KIT REPLACEMENT DIOPTRIC OIL AND PRISM FOR CALIBRATION (Code RI 01572)
For measurement of the 3 indices of honey, i.e.: sugar content, beaume' and water content.Measuring scale: 58-90% Brix (prec. 0.5%)38-Be'-43-Be' (prec. 0.5%)12%-27% water (prec. 1%) Plastic box with pipette and screwdriver for calibration, autom. temper. compensation. , with bottle of dioptric oil and prism for calibration KIT REPLACEMENT GLASS WITH RING (Code RI T001)KIT REPLACEMENT DIOPTRIC OIL AND PRISM FOR CALIBRATION (Code RI 01572)
€56.00Price
Cold mixers capacity kg 300 230V-50 Hz 1mm thick stainless steel drum with TIG welds. Stainless steel internal impeller with quick bayonet coupling. Drain from "2" (tap excluded). Safety lock at lid. 0.55Kw single-phase motor. Diameter cm 62 . Height cm 120 . Power supply 230V-50 Hz.
€1,900.00Price
Cold mixers capacity kg 300 230V-50 Hz 1mm thick stainless steel drum with TIG welds. Stainless steel internal impeller with quick bayonet coupling. Drain from "2" (tap excluded). Safety lock at lid. 0.55Kw single-phase motor. Diameter cm 62 . Height cm 120 . Power supply 230V-50 Hz.
€1,900.00Price
Professional STAINLESS STEEL MATURATOR flat bottom- TIG welding kg.700 - Diameter 68.00 cm - Height 125.00 cm
€690.00Price
Professional STAINLESS STEEL MATURATOR flat bottom- TIG welding kg.700 - Diameter 68.00 cm - Height 125.00 cm
€690.00Price
€690.00Price
Professional INOX MATURATOR flat bottom- TIG welding kg.700
€690.00Price
Professional INOX MATURATOR flat bottom- TIG welding kg.700
Professional INOX MATURATOR flat bottom- TIG welding kg.700
€690.00Price
EXTRACTORS "KIT" Free wheel transmission and brake Transparent polycarbonate lids attached with hinges Transmission holder crossbar and lids, stainless steel Castle in stainless steel or nylon with fiberglass Thrust bearing for shaft in BRONZE Domed bottom with semi-total discharge Stainless steel full-diameter filter Stainless steel tie( art. QI S51-S52-S109-S110-S111-S117-S123) Stainless steel maturer with tap art. QI R11-stainless steel handles Stainless steel hardware
€410.00Price
EXTRACTORS "KIT" Free wheel transmission and brake Transparent polycarbonate lids attached with hinges Transmission holder crossbar and lids, stainless steel Castle in stainless steel or nylon with fiberglass Thrust bearing for shaft in BRONZE Domed bottom with semi-total discharge Stainless steel full-diameter filter Stainless steel tie( art. QI S51-S52-S109-S110-S111-S117-S123) Stainless steel maturer with tap art. QI R11-stainless steel handles Stainless steel hardware
€410.00Price
€410.00Price
MANUAL TANGENTIAL Extractor D.B. kit for 4 Honey super frames or 2 nest frames - with stainless steel basket (Code QI C54)- full diameter stainless steel filter, kg.60 ripener, with stainless steel handles - Ø 370 mm
€410.00Price
MANUAL TANGENTIAL Extractor D.B. kit for 4 Honey super frames or 2 nest frames - with stainless steel basket (Code QI C54)- full diameter stainless steel filter, kg.60 ripener, with stainless steel handles - Ø 370 mm
MANUAL TANGENTIAL Extractor D.B. kit for 4 Honey super frames or 2 nest frames - with stainless steel basket (Code QI C54)- full diameter stainless steel filter, kg.60 ripener, with stainless steel handles - Ø 370 mm
€410.00Price
Variable speed motorization optionals : - ELOBA MOTOR (QI S86) or - ELECTRONIC REGISTRATION MOTOR (QI S122) SERIES 2008 IS A NEW SERIES OF PLANTS DESIGNED FOR "SINGLE-BLOCK" HONEY EXTRACTION. In one machine, you have everything you need in a honey extraction room, uncapping ,operculum treatment , accumulation of uncapped combs , honey extraction and honey decanting. The most obvious advantages are: smaller footprint, convenience in processing steps, with higher yield and reduction of 'inevitable dripping of honey on the floor. The 2008 series is produced in different versions from the hobbyist beekeeper to the professional.
€700.00Price
Variable speed motorization optionals : - ELOBA MOTOR (QI S86) or - ELECTRONIC REGISTRATION MOTOR (QI S122) SERIES 2008 IS A NEW SERIES OF PLANTS DESIGNED FOR "SINGLE-BLOCK" HONEY EXTRACTION. In one machine, you have everything you need in a honey extraction room, uncapping ,operculum treatment , accumulation of uncapped combs , honey extraction and honey decanting. The most obvious advantages are: smaller footprint, convenience in processing steps, with higher yield and reduction of 'inevitable dripping of honey on the floor. The 2008 series is produced in different versions from the hobbyist beekeeper to the professional.
€700.00Price
€700.00Price
Extractor series 2008- Tangential for 4 Honey super or 2 D.B. nest combs with manual transmission - Nylon cutting tap diameter 40 mm Dim.[mm] : Lengh: 1250 x Wd: 470 x Height 800 (+ Removable and height adjustable legs)
€700.00Price
Extractor series 2008- Tangential for 4 Honey super or 2 D.B. nest combs with manual transmission - Nylon cutting tap diameter 40 mm Dim.[mm] : Lengh: 1250 x Wd: 470 x Height 800 (+ Removable and height adjustable legs)
Extractor series 2008- Tangential for 4 Honey super or 2 D.B. nest combs with manual transmission - Nylon cutting tap diameter 40 mm Dim.[mm] : Lengh: 1250 x Wd: 470 x Height 800 (+ Removable and height adjustable legs)
€700.00Price
- New
€7.00Price
Flexible silicone soap mold
Dimensions: 23.5 cm x 8 cm x 24.4 cm
They are reusable and dishwasher safe. They are also suitable for candle making. They can come into contact with various materials, including: beeswax, ceramic plaster, epoxy resin, soy wax, soap base, creative cement, paraffin, and palm wax.
- New
€7.00Price
Flexible silicone soap mold
Dimensions: 23.5 cm x 8 cm x 24.4 cm
They are reusable and dishwasher safe. They are also suitable for candle making. They can come into contact with various materials, including: beeswax, ceramic plaster, epoxy resin, soy wax, soap base, creative cement, paraffin, and palm wax.
- New
Flexible silicone soap mold
Dimensions: 23.5 cm x 8 cm x 24.4 cm
They are reusable and dishwasher safe. They are also suitable for candle making. They can come into contact with various materials, including: beeswax, ceramic plaster, epoxy resin, soy wax, soap base, creative cement, paraffin, and palm wax.
€7.00Price
€930.00Price
RADIAL Extractor D.B. MOTOR - with ELECTRONIC speed regulator - 230V/100W - rotation in 2 directions - with INOX basket for 9 Honey super frames or (3 from nest with additional cages) - Ø 525 with Ø 40 mm nylon cutting tap Stainless basket (QI Cod. C11) For nest combs, No. 3 additional stainless steel cages not included (QI Cod. G06) are required.
€930.00Price
RADIAL Extractor D.B. MOTOR - with ELECTRONIC speed regulator - 230V/100W - rotation in 2 directions - with INOX basket for 9 Honey super frames or (3 from nest with additional cages) - Ø 525 with Ø 40 mm nylon cutting tap Stainless basket (QI Cod. C11) For nest combs, No. 3 additional stainless steel cages not included (QI Cod. G06) are required.
RADIAL Extractor D.B. MOTOR - with ELECTRONIC speed regulator - 230V/100W - rotation in 2 directions - with INOX basket for 9 Honey super frames or (3 from nest with additional cages) - Ø 525 with Ø 40 mm nylon cutting tap Stainless basket (QI Cod. C11) For nest combs, No. 3 additional stainless steel cages not included (QI Cod. G06) are required.
€930.00Price
€2.20Price
Smooth beeswax candleDiameter: 2 cm - Height: 20 cm - Weight: 21 gMADE IN ITALY
€2.20Price
Smooth beeswax candleDiameter: 2 cm - Height: 20 cm - Weight: 21 gMADE IN ITALY
Smooth beeswax candleDiameter: 2 cm - Height: 20 cm - Weight: 21 gMADE IN ITALY
€2.20Price
€0.52Price
Antique green glass marasca oil bottle with screw cap mouth for plastic stopperCapacity: 265 mlØ=45.5 x h=211.5 mm Weight=225 g OPTION: with or without plastic screw cap with drip saverØ cap 31 mm In thermopacks of 40 pieces (The quantity ordered refers to individual bottles, not thermopacks) Data sheet: see ANNEX CAPSULE REPLACEMENT: Cap metal PP31.5x24 prethreaded black with drip saver for manual closure (cod. BI 14343H)
€0.52Price
Antique green glass marasca oil bottle with screw cap mouth for plastic stopperCapacity: 265 mlØ=45.5 x h=211.5 mm Weight=225 g OPTION: with or without plastic screw cap with drip saverØ cap 31 mm In thermopacks of 40 pieces (The quantity ordered refers to individual bottles, not thermopacks) Data sheet: see ANNEX CAPSULE REPLACEMENT: Cap metal PP31.5x24 prethreaded black with drip saver for manual closure (cod. BI 14343H)
Antique green glass marasca oil bottle with screw cap mouth for plastic stopperCapacity: 265 mlØ=45.5 x h=211.5 mm Weight=225 g OPTION: with or without plastic screw cap with drip saverØ cap 31 mm In thermopacks of 40 pieces (The quantity ordered refers to individual bottles, not thermopacks) Data sheet: see ANNEX CAPSULE REPLACEMENT: Cap metal PP31.5x24 prethreaded black with drip saver for manual closure (cod. BI 14343H)
€0.52Price
Use "Styrofoam " Beehives for increased performance, comfort and protection of your bees from summer and winter temperature changes. Save bee feed!
Accessories:
Styrofoam feeder cover for Beehives d.b. 10 frames (code QI C103)
Electrowelded galvanized sheet metal box roof (code FO 1061)
Honey super for Beehives d.b. 10 frames in painted wood (code FO 3000)
Spare parts:
Toothed and perforated plastic DOOR for plastic mobile bottom (code QI P31)
€94.00Price
Use "Styrofoam " Beehives for increased performance, comfort and protection of your bees from summer and winter temperature changes. Save bee feed!
Accessories:
Styrofoam feeder cover for Beehives d.b. 10 frames (code QI C103)
Electrowelded galvanized sheet metal box roof (code FO 1061)
Honey super for Beehives d.b. 10 frames in painted wood (code FO 3000)
Spare parts:
Toothed and perforated plastic DOOR for plastic mobile bottom (code QI P31)
€94.00Price
€94.00Price
Beehive set up for 9 nesting frames standard sizes D.B
Honey super, bee escape, queen excluder ..are the same as those used for traditional D.B. 10-frame hives made of wood or polystyrene.
Outer dimensions 43.5x50 cm
Antivarroa movable bottom detachable from the Beehive body (code F62)
Plastic toothed and perforatedPORTICINA for plastic movable bottom (code QI P31)
Sturdy side gripping handles, front and rear protrusions for additional beehive grip
Beehive walls up to 4 cm thick of high-density Polystyrene.
Reinforcing and wear-resistant top beading on 4 sides.
Bee-saving spacers and propolis collection channel.
3 connection angles (code QI A10) and 1 lever rest angle (code QI A11) interchangeable. Nest only For data sheet SEE ANNEX.
€94.00Price
Beehive set up for 9 nesting frames standard sizes D.B
Honey super, bee escape, queen excluder ..are the same as those used for traditional D.B. 10-frame hives made of wood or polystyrene.
Outer dimensions 43.5x50 cm
Antivarroa movable bottom detachable from the Beehive body (code F62)
Plastic toothed and perforatedPORTICINA for plastic movable bottom (code QI P31)
Sturdy side gripping handles, front and rear protrusions for additional beehive grip
Beehive walls up to 4 cm thick of high-density Polystyrene.
Reinforcing and wear-resistant top beading on 4 sides.
Bee-saving spacers and propolis collection channel.
3 connection angles (code QI A10) and 1 lever rest angle (code QI A11) interchangeable. Nest only For data sheet SEE ANNEX.
Beehive set up for 9 nesting frames standard sizes D.B
Honey super, bee escape, queen excluder ..are the same as those used for traditional D.B. 10-frame hives made of wood or polystyrene.
Outer dimensions 43.5x50 cm
Antivarroa movable bottom detachable from the Beehive body (code F62)
Plastic toothed and perforatedPORTICINA for plastic movable bottom (code QI P31)
Sturdy side gripping handles, front and rear protrusions for additional beehive grip
Beehive walls up to 4 cm thick of high-density Polystyrene.
Reinforcing and wear-resistant top beading on 4 sides.
Bee-saving spacers and propolis collection channel.
3 connection angles (code QI A10) and 1 lever rest angle (code QI A11) interchangeable. Nest only For data sheet SEE ANNEX.
€94.00Price
- Accessories11) Honey super D.B. 6-frame honeycomb (Cod. QI M60) 12) Styrofoam lid with mesh (Cod. QI C16)13) Wood and mesh lid (Cod. PI 38/A)14) Perforated sheet metal lid (Cod. FO 1045)15) Perforated plastic lid (Cod. ES RT)16) Sheet metal roof (Cod. FO 1042)- Porches 21) Galvanized porch center position (Cod. QI P25)22) Galvanized protective porch with slider (Cod. QI P35)23) Replacement slider protective porch (Cod. QI P36)- Feeders31) 1-hole cable cover feeder (Cod. QI N06)32) 1-hole cable cover feeder new (Cod. QI N07)33) Double compartment cable cover feeder (Cod. QI N12)34) Replacement bell (Cod. QI C97)35) Replacement Vulcanello (Cod. QI C107)- Spare parts 41) Polystyrene porch (Cod. QI P21)42) Polystyrene lid (Art. QI C16B)
€23.50Price
- Accessories11) Honey super D.B. 6-frame honeycomb (Cod. QI M60) 12) Styrofoam lid with mesh (Cod. QI C16)13) Wood and mesh lid (Cod. PI 38/A)14) Perforated sheet metal lid (Cod. FO 1045)15) Perforated plastic lid (Cod. ES RT)16) Sheet metal roof (Cod. FO 1042)- Porches 21) Galvanized porch center position (Cod. QI P25)22) Galvanized protective porch with slider (Cod. QI P35)23) Replacement slider protective porch (Cod. QI P36)- Feeders31) 1-hole cable cover feeder (Cod. QI N06)32) 1-hole cable cover feeder new (Cod. QI N07)33) Double compartment cable cover feeder (Cod. QI N12)34) Replacement bell (Cod. QI C97)35) Replacement Vulcanello (Cod. QI C107)- Spare parts 41) Polystyrene porch (Cod. QI P21)42) Polystyrene lid (Art. QI C16B)
€23.50Price
€23.50Price
- Beehives polystyrene nest D.B. 6 frames Reinforced edge1) Full bottom net, fixed bottom, reinforced edge (YELLOW) (Cod. QI A103B)2) Full bottom net, movable bottom, reinforced edge (GREEN) (Cod. QI A77B)3) Divisible, fixed bottom, reinforced edge (BLUE) (QI Cod. A131)4) Divisible, movable bottom, reinforced edge (RED) (QI Cod. A131G) -- For Accessories and spare parts see below- To order product CLICK on (code in orange)
€23.50Price
- Beehives polystyrene nest D.B. 6 frames Reinforced edge1) Full bottom net, fixed bottom, reinforced edge (YELLOW) (Cod. QI A103B)2) Full bottom net, movable bottom, reinforced edge (GREEN) (Cod. QI A77B)3) Divisible, fixed bottom, reinforced edge (BLUE) (QI Cod. A131)4) Divisible, movable bottom, reinforced edge (RED) (QI Cod. A131G) -- For Accessories and spare parts see below- To order product CLICK on (code in orange)
- Beehives polystyrene nest D.B. 6 frames Reinforced edge1) Full bottom net, fixed bottom, reinforced edge (YELLOW) (Cod. QI A103B)2) Full bottom net, movable bottom, reinforced edge (GREEN) (Cod. QI A77B)3) Divisible, fixed bottom, reinforced edge (BLUE) (QI Cod. A131)4) Divisible, movable bottom, reinforced edge (RED) (QI Cod. A131G) -- For Accessories and spare parts see below- To order product CLICK on (code in orange)
€23.50Price
€455.00Price
€455.00Price
Manual device that facilitates the uncapping process.
Made of stainless steel and polyamide suitable for food use.
Dimensions:
Does not require electricity or steam.
Easy to install.
€455.00Price
Manual device that facilitates the uncapping process.
Made of stainless steel and polyamide suitable for food use.
Dimensions:
Does not require electricity or steam.
Easy to install.
Manual device that facilitates the uncapping process.
Made of stainless steel and polyamide suitable for food use.
Dimensions:
Does not require electricity or steam.
Easy to install.
€455.00Price
€0.68Price
ORCIO 580 ml glass jar for HONEY 750 g - with twist-off Cap TO 82 (mouth diameter 82 mm)
h= 109 mm - Diam. = 103 mm - weight = 270 g
IN TERMOPACKS of 9 pieces
(The quantity ordered refers to individual jars, not thermopacks)
For CAPSULES:
- CLASSIC FLAT
- PASTEURIZATION WITH FLIP
- STERILIZATION WITH FLIP
€0.68Price
ORCIO 580 ml glass jar for HONEY 750 g - with twist-off Cap TO 82 (mouth diameter 82 mm)
h= 109 mm - Diam. = 103 mm - weight = 270 g
IN TERMOPACKS of 9 pieces
(The quantity ordered refers to individual jars, not thermopacks)
For CAPSULES:
- CLASSIC FLAT
- PASTEURIZATION WITH FLIP
- STERILIZATION WITH FLIP
ORCIO 580 ml glass jar for HONEY 750 g - with twist-off Cap TO 82 (mouth diameter 82 mm)
h= 109 mm - Diam. = 103 mm - weight = 270 g
IN TERMOPACKS of 9 pieces
(The quantity ordered refers to individual jars, not thermopacks)
For CAPSULES:
- CLASSIC FLAT
- PASTEURIZATION WITH FLIP
- STERILIZATION WITH FLIP
€0.68Price
€65.00Price
The beekeeper's kit that allows you to start your beekeeping business
Protective clothing:
- Square beekeeper's mask made of aluminum mesh, with axillary elastics and hat made of double yellow cotton fabric (FO 4200)
-White leather beekeeping gloves with elasticated cotton sleeve (2G H.302) (SELECT SIZE)
Beekeeping equipment included in the kit:
-Stainless steel 8-cm-diameter smoker with vinyl-leather and wood bellows, with anti-scald net (FO 2020)
-Long painted steel lever (FO 2871)
-Large brush with plastic bristle and wooden handle (FO 3421)
€65.00Price
The beekeeper's kit that allows you to start your beekeeping business
Protective clothing:
- Square beekeeper's mask made of aluminum mesh, with axillary elastics and hat made of double yellow cotton fabric (FO 4200)
-White leather beekeeping gloves with elasticated cotton sleeve (2G H.302) (SELECT SIZE)
Beekeeping equipment included in the kit:
-Stainless steel 8-cm-diameter smoker with vinyl-leather and wood bellows, with anti-scald net (FO 2020)
-Long painted steel lever (FO 2871)
-Large brush with plastic bristle and wooden handle (FO 3421)
The beekeeper's kit that allows you to start your beekeeping business
Protective clothing:
- Square beekeeper's mask made of aluminum mesh, with axillary elastics and hat made of double yellow cotton fabric (FO 4200)
-White leather beekeeping gloves with elasticated cotton sleeve (2G H.302) (SELECT SIZE)
Beekeeping equipment included in the kit:
-Stainless steel 8-cm-diameter smoker with vinyl-leather and wood bellows, with anti-scald net (FO 2020)
-Long painted steel lever (FO 2871)
-Large brush with plastic bristle and wooden handle (FO 3421)
€65.00Price
- Accessories11) Honey super D.B. 6 honeycombs (Cod. QI M60)12) Front spacer (Cod. QI D32)13) Side reinforcement (Cod. QI R128)14) Polystyrene lid with mesh (Cod. QI C16)15) Wood and mesh lid (Cod. PI 38/A)16) Perforated sheet metal cover (Cod. FO 1045)17) Perforated plastic cover (Cod. ES RT)18) Sheet metal roof (Cod. FO 1042)- Porches 21) Galvanized porch center position (Cod. QI P25)22) Galvanized protective porch with slider (Cod. QI P35)23) Replacement slider protective porch (Cod. QI P36)- Feeders31) 1-hole cable cover feeder (Cod. QI N06)32) 1-hole cable cover feeder new (Cod. QI N07)33) Double compartment cable cover feeder (Cod. QI N12)34) Replacement bell (Cod. QI C97)35) Replacement Vulcanello (Cod. QI C107)- Spare parts 41) Polystyrene porch (Cod. QI P21)42) Polystyrene lid (Art. QI C16B)
€17.50Price
- Accessories11) Honey super D.B. 6 honeycombs (Cod. QI M60)12) Front spacer (Cod. QI D32)13) Side reinforcement (Cod. QI R128)14) Polystyrene lid with mesh (Cod. QI C16)15) Wood and mesh lid (Cod. PI 38/A)16) Perforated sheet metal cover (Cod. FO 1045)17) Perforated plastic cover (Cod. ES RT)18) Sheet metal roof (Cod. FO 1042)- Porches 21) Galvanized porch center position (Cod. QI P25)22) Galvanized protective porch with slider (Cod. QI P35)23) Replacement slider protective porch (Cod. QI P36)- Feeders31) 1-hole cable cover feeder (Cod. QI N06)32) 1-hole cable cover feeder new (Cod. QI N07)33) Double compartment cable cover feeder (Cod. QI N12)34) Replacement bell (Cod. QI C97)35) Replacement Vulcanello (Cod. QI C107)- Spare parts 41) Polystyrene porch (Cod. QI P21)42) Polystyrene lid (Art. QI C16B)
€17.50Price
€17.50Price
- Beehives polystyrene nest D.B. 6-frame base
1) Classic (Polystyrene (high density) (Cod. QI A41)
2) Lightweight (Polystyrene (low density) - (Cod. QI A89)
3) Total mesh bottom fixed bottom (Cod. QI A103)
4) Total mesh bottom with removable drawer (QI Cod. A77)
5) Spaced and ventilated total mesh bottom (QI Cod. A105)
For Accessories and spare parts see below- To order product CLICK on (code in orange)
€17.50Price
- Beehives polystyrene nest D.B. 6-frame base
1) Classic (Polystyrene (high density) (Cod. QI A41)
2) Lightweight (Polystyrene (low density) - (Cod. QI A89)
3) Total mesh bottom fixed bottom (Cod. QI A103)
4) Total mesh bottom with removable drawer (QI Cod. A77)
5) Spaced and ventilated total mesh bottom (QI Cod. A105)
For Accessories and spare parts see below- To order product CLICK on (code in orange)
- Beehives polystyrene nest D.B. 6-frame base
1) Classic (Polystyrene (high density) (Cod. QI A41)
2) Lightweight (Polystyrene (low density) - (Cod. QI A89)
3) Total mesh bottom fixed bottom (Cod. QI A103)
4) Total mesh bottom with removable drawer (QI Cod. A77)
5) Spaced and ventilated total mesh bottom (QI Cod. A105)
For Accessories and spare parts see below- To order product CLICK on (code in orange)
€17.50Price
€6.50Price
Plastic pocket feeder for food Langstroth plastic nest with floats (ANEL)Size: 48 x 23.5 x 3.00 cm - Weight: 580.00 g - Capacity 3 kgThe feeder fills from the bottom up, without disturbing the swarm, and which does not need to be moved for filling. Its specially designed plastic floats protect the bees from drowning. Its specially finished walls make it easier for the bees to climb up and down safely.Tip: During winter it can be used to decrease the space available to the bees, and to insulate the swarm laterally.
€6.50Price
Plastic pocket feeder for food Langstroth plastic nest with floats (ANEL)Size: 48 x 23.5 x 3.00 cm - Weight: 580.00 g - Capacity 3 kgThe feeder fills from the bottom up, without disturbing the swarm, and which does not need to be moved for filling. Its specially designed plastic floats protect the bees from drowning. Its specially finished walls make it easier for the bees to climb up and down safely.Tip: During winter it can be used to decrease the space available to the bees, and to insulate the swarm laterally.
Plastic pocket feeder for food Langstroth plastic nest with floats (ANEL)Size: 48 x 23.5 x 3.00 cm - Weight: 580.00 g - Capacity 3 kgThe feeder fills from the bottom up, without disturbing the swarm, and which does not need to be moved for filling. Its specially designed plastic floats protect the bees from drowning. Its specially finished walls make it easier for the bees to climb up and down safely.Tip: During winter it can be used to decrease the space available to the bees, and to insulate the swarm laterally.
€6.50Price
€2.40Price
Wax sheets D.B. NIDO LAMINATI of pure operculum - 1 sheet 115 g approx. Size: sheet 41 x 26 cm PROVENANCE : ITALY
€2.40Price
Wax sheets D.B. NIDO LAMINATI of pure operculum - 1 sheet 115 g approx. Size: sheet 41 x 26 cm PROVENANCE : ITALY
Wax sheets D.B. NIDO LAMINATI of pure operculum - 1 sheet 115 g approx. Size: sheet 41 x 26 cm PROVENANCE : ITALY
€2.40Price
The ingredients that can be used are different, below is a possible recipe:Ingredients:Glycerin, beeswax, honey, water, essential oils to taste. Utensils:a saucepan, a container to be used only for soap, a spoon for turning, the silicone mold (molds) Procedure:Heat some water in a saucepan, divide the glycerin into small parts and melt it in a double boiler being careful not to let it bubble.Add 2 grams of wax and 5 grams of honey(optional). Stir well. Pour the contents into the cleaned and dried mold., being careful not to burn. Allow to cool in a cool, dry place for at least 1 hour. Tip:Dried flowers or other natural components can be used to embellish the soaps.The ingredients that can be used are different, below is a possible recipe:Ingredients: Glycerin, beeswax, honey, water, essential oils to taste. Utensils:a pot, a container to be used only for soap, a spoon for turning, the silicone mold (molds) Procedure:Heat some water in a pot, divide the glycerin into small parts and melt it in a water bath, being careful not to let it bubble. Add 2 grams of wax and 5 grams of honey(optional). Stir well. Pour the contents into the cleaned and dried mold., being careful not to burn. Allow to cool in a cool, dry place for at least 1 hour. Tip: Dried flowers or other natural components can be used to embellish the soaps.
The ingredients that can be used are different, below is a possible recipe:Ingredients:Glycerin, beeswax, honey, water, essential oils to taste. Utensils:a saucepan, a container to be used only for soap, a spoon for turning, the silicone mold (molds) Procedure:Heat some water in a saucepan, divide the glycerin into small parts and melt it in a double boiler being careful not to let it bubble.Add 2 grams of wax and 5 grams of honey(optional). Stir well. Pour the contents into the cleaned and dried mold., being careful not to burn. Allow to cool in a cool, dry place for at least 1 hour. Tip:Dried flowers or other natural components can be used to embellish the soaps.The ingredients that can be used are different, below is a possible recipe:Ingredients: Glycerin, beeswax, honey, water, essential oils to taste. Utensils:a pot, a container to be used only for soap, a spoon for turning, the silicone mold (molds) Procedure:Heat some water in a pot, divide the glycerin into small parts and melt it in a water bath, being careful not to let it bubble. Add 2 grams of wax and 5 grams of honey(optional). Stir well. Pour the contents into the cleaned and dried mold., being careful not to burn. Allow to cool in a cool, dry place for at least 1 hour. Tip: Dried flowers or other natural components can be used to embellish the soaps.
The molds are made of flexible silicone; they can be reused and are dishwasher safe.They are also suitable for candle making.They can be in contact with a variety of materials: beeswax, ceramic plaster, epoxy resin, soy wax, soap base, creative cement, kerosene wax, palm wax,... They are not suitable for food production.
The molds are made of flexible silicone; they can be reused and are dishwasher safe.They are also suitable for candle making.They can be in contact with a variety of materials: beeswax, ceramic plaster, epoxy resin, soy wax, soap base, creative cement, kerosene wax, palm wax,... They are not suitable for food production.
The molds are made of flexible silicone; they can be reused and are dishwasher safe.They are also suitable for candle making.They can be in contact with a variety of materials: beeswax, ceramic plaster, epoxy resin, soy wax, soap base, creative cement, kerosene wax, palm wax,... They are not suitable for food production.
€11.00Price
Shea butter glycerin for making soaps, 0.5 kg package (gross weight 0.525 kg)
€11.00Price
Shea butter glycerin for making soaps, 0.5 kg package (gross weight 0.525 kg)
Shea butter glycerin for making soaps, 0.5 kg package (gross weight 0.525 kg)
€11.00Price
€1.35Price
BROWN CARDBOARD BOX for 12 1 kg JARS HONEYDimensions: 39 x 29.5 x H 15 cm
€1.35Price
BROWN CARDBOARD BOX for 12 1 kg JARS HONEYDimensions: 39 x 29.5 x H 15 cm
BROWN CARDBOARD BOX for 12 1 kg JARS HONEYDimensions: 39 x 29.5 x H 15 cm
€1.35Price
€0.30Price
5 ml yellow glass bottle - complete with black PFP 14 cap without seal
Diameter: 22.5 mm - Height: 50 mm
Packaged in a thermo-pack of 100
€0.30Price
5 ml yellow glass bottle - complete with black PFP 14 cap without seal
Diameter: 22.5 mm - Height: 50 mm
Packaged in a thermo-pack of 100
5 ml yellow glass bottle - complete with black PFP 14 cap without seal
Diameter: 22.5 mm - Height: 50 mm
Packaged in a thermo-pack of 100
€0.30Price
€0.16Price
RTS-RTO TO 82 twist-off CAPSULE (diam. 82 mm) for 1000 g honey jar -770 ml SUITABLE FOR HOT STERILIZATION PROCESSES WITH SAFETY BOTTLE UNDER VACUUM EDGE with notches : height = 11 mm COLOR OPTIONS: Gold - Silver
€0.16Price
RTS-RTO TO 82 twist-off CAPSULE (diam. 82 mm) for 1000 g honey jar -770 ml SUITABLE FOR HOT STERILIZATION PROCESSES WITH SAFETY BOTTLE UNDER VACUUM EDGE with notches : height = 11 mm COLOR OPTIONS: Gold - Silver
RTS-RTO TO 82 twist-off CAPSULE (diam. 82 mm) for 1000 g honey jar -770 ml SUITABLE FOR HOT STERILIZATION PROCESSES WITH SAFETY BOTTLE UNDER VACUUM EDGE with notches : height = 11 mm COLOR OPTIONS: Gold - Silver
€0.16Price
€0.16Price
RTS-RTO TO 82 twist-off CAPSULE ( diam. 82 mm) for 1000 g honey jar -770 ml SUITABLE FOR HOT PASTEURIZING PROCESSES WITH SAFETY BOTTLE UNDER VACUUM EDGE with notches : height = 11 mm COLOR OPTIONS: Gold - Silver - Green
€0.16Price
RTS-RTO TO 82 twist-off CAPSULE ( diam. 82 mm) for 1000 g honey jar -770 ml SUITABLE FOR HOT PASTEURIZING PROCESSES WITH SAFETY BOTTLE UNDER VACUUM EDGE with notches : height = 11 mm COLOR OPTIONS: Gold - Silver - Green
RTS-RTO TO 82 twist-off CAPSULE ( diam. 82 mm) for 1000 g honey jar -770 ml SUITABLE FOR HOT PASTEURIZING PROCESSES WITH SAFETY BOTTLE UNDER VACUUM EDGE with notches : height = 11 mm COLOR OPTIONS: Gold - Silver - Green
€0.16Price
To facilitate the beekeeper, the antenna has been integrated into the body of the scale to prevent external damage. It features an external LED display, which allows instant reading of the weight. Two sensors are built in: internal humidity and RGB sensor. The scale's internal humidity sensor allows faster and more efficient control of the scale's functionality, while the RGB sensor allows monitoring of external brightness. Finally, a buzzer has been added, allowing the beekeeper to be precisely guided in the use of the scale button, both for digital weight display and for any diagnostic procedures. FEATURES Lightweight and compact Battery life over 3 months Free web application for remote management Monitoring of production, climate and flowering Materials: thick anodized aluminum from Italian supply chain, inert silicone, rohs compliant welds and shielded cables against electromagnetic interference. In addition, data is encrypted and 3Bee has no direct access to it unless authorized in writing by the customer. Data security is the first priority.
€780.00Price
To facilitate the beekeeper, the antenna has been integrated into the body of the scale to prevent external damage. It features an external LED display, which allows instant reading of the weight. Two sensors are built in: internal humidity and RGB sensor. The scale's internal humidity sensor allows faster and more efficient control of the scale's functionality, while the RGB sensor allows monitoring of external brightness. Finally, a buzzer has been added, allowing the beekeeper to be precisely guided in the use of the scale button, both for digital weight display and for any diagnostic procedures. FEATURES Lightweight and compact Battery life over 3 months Free web application for remote management Monitoring of production, climate and flowering Materials: thick anodized aluminum from Italian supply chain, inert silicone, rohs compliant welds and shielded cables against electromagnetic interference. In addition, data is encrypted and 3Bee has no direct access to it unless authorized in writing by the customer. Data security is the first priority.
€780.00Price
€780.00Price
Dual scales complete with remote Beehive monitoring to measure parameters such as internal temperature, internal humidity, weight and sound The single scale is composed of an anodized aluminum rail, capable of withstanding even the most adverse environmental conditions, and equipped with anti-slip slides to ensure maximum Beehive stability. Each scale is equipped with two load cells that weigh a total of up to 150kg, with a resolution of 50g.Provision has been made to modify the load cells so that they can weigh up to 300kg. The single scale records all changes in Beehive weight and returns data on external environmental conditions. By offering a divisible product, thought has been given to the convenience of installation: to place the scales you will only have to lift one side of the Beehive, with no effort required.
€780.00Price
Dual scales complete with remote Beehive monitoring to measure parameters such as internal temperature, internal humidity, weight and sound The single scale is composed of an anodized aluminum rail, capable of withstanding even the most adverse environmental conditions, and equipped with anti-slip slides to ensure maximum Beehive stability. Each scale is equipped with two load cells that weigh a total of up to 150kg, with a resolution of 50g.Provision has been made to modify the load cells so that they can weigh up to 300kg. The single scale records all changes in Beehive weight and returns data on external environmental conditions. By offering a divisible product, thought has been given to the convenience of installation: to place the scales you will only have to lift one side of the Beehive, with no effort required.
Dual scales complete with remote Beehive monitoring to measure parameters such as internal temperature, internal humidity, weight and sound The single scale is composed of an anodized aluminum rail, capable of withstanding even the most adverse environmental conditions, and equipped with anti-slip slides to ensure maximum Beehive stability. Each scale is equipped with two load cells that weigh a total of up to 150kg, with a resolution of 50g.Provision has been made to modify the load cells so that they can weigh up to 300kg. The single scale records all changes in Beehive weight and returns data on external environmental conditions. By offering a divisible product, thought has been given to the convenience of installation: to place the scales you will only have to lift one side of the Beehive, with no effort required.
€780.00Price
€0.38Price
GLASS CONTAINER for 5 ml yellow bottles - BOCCA PFP 18 Pack in thermopack of 228 pieces - SEE Quantity Discount
€0.38Price
GLASS CONTAINER for 5 ml yellow bottles - BOCCA PFP 18 Pack in thermopack of 228 pieces - SEE Quantity Discount
GLASS CONTAINER for 5 ml yellow bottles - BOCCA PFP 18 Pack in thermopack of 228 pieces - SEE Quantity Discount
€0.38Price
The Kenyan Beehive will appeal to amateur beekeepers looking for a model that requires few controls and equipment. Equipped with a Plexiglas viewing window along its entire length. How does a top bar beehive work? The Beehive top bar promotes the natural behavior of bees nesting in hollow spaces, in fact, in addition to reconstructing a natural hollow environment, it does not involve the use of the wax sheet and leaves the bees free to form the honeycomb on the triangular bars. How much honey is produced with a Top Bar Beehive? Each Beehive produces an average of 20 to 50 kg of honey in a year. The exact amount varies depending on the type of honey, the number of bees, the blooms in the area but also the strength of a swarm. Top Bar Beehives take the shape of natural cavities, such as tree trunks. They are true "cottages" that provide the thermal insulation and space necessary for the birth of genuine honey with countless beneficial properties. A kind of small passive house inside which the bee can live life independently, protected from the outside and free to create its own Beehive with the wax produced, one hundred percent natural.
€309.00Price
The Kenyan Beehive will appeal to amateur beekeepers looking for a model that requires few controls and equipment. Equipped with a Plexiglas viewing window along its entire length. How does a top bar beehive work? The Beehive top bar promotes the natural behavior of bees nesting in hollow spaces, in fact, in addition to reconstructing a natural hollow environment, it does not involve the use of the wax sheet and leaves the bees free to form the honeycomb on the triangular bars. How much honey is produced with a Top Bar Beehive? Each Beehive produces an average of 20 to 50 kg of honey in a year. The exact amount varies depending on the type of honey, the number of bees, the blooms in the area but also the strength of a swarm. Top Bar Beehives take the shape of natural cavities, such as tree trunks. They are true "cottages" that provide the thermal insulation and space necessary for the birth of genuine honey with countless beneficial properties. A kind of small passive house inside which the bee can live life independently, protected from the outside and free to create its own Beehive with the wax produced, one hundred percent natural.
€309.00Price
€309.00Price
TOP BAR Beehives - complete with its bars (frames) Equipped with a full-length Plexiglass viewing window Can be used as an EDUCATIONAL Beehive Beehives of African origin (Kenya) will appeal to amateur beekeepers looking for a model that requires few controls and equipment.
€309.00Price
TOP BAR Beehives - complete with its bars (frames) Equipped with a full-length Plexiglass viewing window Can be used as an EDUCATIONAL Beehive Beehives of African origin (Kenya) will appeal to amateur beekeepers looking for a model that requires few controls and equipment.
TOP BAR Beehives - complete with its bars (frames) Equipped with a full-length Plexiglass viewing window Can be used as an EDUCATIONAL Beehive Beehives of African origin (Kenya) will appeal to amateur beekeepers looking for a model that requires few controls and equipment.
€309.00Price
Assembled and painted 10-fawn nest, including: honeycomb cover with 4-position disk mounted; 10-cm-high galvanized sheet metal lid lined with wood and faestile on the bottom; canopy the galvanized sheet metal; plastic transport template; galvanized pinwheels; metal door; 3 connection angles-spacers mounted in the nest; fixed anti-moth net bottom with galvanized sheet metal bottom tray removable from the back; 25mm-thick seasoned fir wood; walls assembled with screws; transport handles; Frame rest
€100.00Price
Assembled and painted 10-fawn nest, including: honeycomb cover with 4-position disk mounted; 10-cm-high galvanized sheet metal lid lined with wood and faestile on the bottom; canopy the galvanized sheet metal; plastic transport template; galvanized pinwheels; metal door; 3 connection angles-spacers mounted in the nest; fixed anti-moth net bottom with galvanized sheet metal bottom tray removable from the back; 25mm-thick seasoned fir wood; walls assembled with screws; transport handles; Frame rest
€100.00Price
€100.00Price
Beehives Dadant Blatt 10-frame Beehive Standard with fixed anti-varroa mesh bottom. Nest only (Frames not included) Varnish + Paraffin coating (FOOD PARAFFIN) Paraffin coating is done in a hot bath with immersion, the entire Beehive is paraffined inside and out to ensure the durability of the Beehives (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€100.00Price
Beehives Dadant Blatt 10-frame Beehive Standard with fixed anti-varroa mesh bottom. Nest only (Frames not included) Varnish + Paraffin coating (FOOD PARAFFIN) Paraffin coating is done in a hot bath with immersion, the entire Beehive is paraffined inside and out to ensure the durability of the Beehives (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehives Dadant Blatt 10-frame Beehive Standard with fixed anti-varroa mesh bottom. Nest only (Frames not included) Varnish + Paraffin coating (FOOD PARAFFIN) Paraffin coating is done in a hot bath with immersion, the entire Beehive is paraffined inside and out to ensure the durability of the Beehives (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€100.00Price
€16.50Price
Flexible silicone soap moldMeasures: 22.4 cm x 16 cm x 2.5 cm - Weight: 0.24 kgThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€16.50Price
Flexible silicone soap moldMeasures: 22.4 cm x 16 cm x 2.5 cm - Weight: 0.24 kgThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap moldMeasures: 22.4 cm x 16 cm x 2.5 cm - Weight: 0.24 kgThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€16.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€13.90Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€13.90Price
€13.90Price
Height: 50 mm Wax weight: 20 g Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€13.90Price
Height: 50 mm Wax weight: 20 g Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Height: 50 mm Wax weight: 20 g Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€13.90Price
Assembled and painted 7-frame honeycomb nest, including: honeycomb cover with mounted 4-position disc; 10cm-high galvanized sheet metal lid; metal door; 3 connection angles; 7-frame spacers mounted in the nest; fixed anti-moth net bottom with galvanized sheet metal bottom tray removable from the back; 25mm-thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest
€89.00Price
Assembled and painted 7-frame honeycomb nest, including: honeycomb cover with mounted 4-position disc; 10cm-high galvanized sheet metal lid; metal door; 3 connection angles; 7-frame spacers mounted in the nest; fixed anti-moth net bottom with galvanized sheet metal bottom tray removable from the back; 25mm-thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest
€89.00Price
€89.00Price
Beehive Dadant Blatt 7-frame cube with fixed anti-varroa mesh bottom. Nest only (Frames not included) (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€89.00Price
Beehive Dadant Blatt 7-frame cube with fixed anti-varroa mesh bottom. Nest only (Frames not included) (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehive Dadant Blatt 7-frame cube with fixed anti-varroa mesh bottom. Nest only (Frames not included) (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€89.00Price
€0.72Price
REGINA glass jar for honey, 1000 g - 770 ml - 82 mm opening
H = 122 mm - Diam. = 89.8 mm - weight = 300 g
IN THERMO-PACKS of 15 (The quantity ordered refers to individual jars, not thermo-paks)
For CAPSULES:
- CLASSIC FLAT
- PASTEURIZATION WITH FLIP
- STERILIZATION WITH FLIP
€0.72Price
REGINA glass jar for honey, 1000 g - 770 ml - 82 mm opening
H = 122 mm - Diam. = 89.8 mm - weight = 300 g
IN THERMO-PACKS of 15 (The quantity ordered refers to individual jars, not thermo-paks)
For CAPSULES:
- CLASSIC FLAT
- PASTEURIZATION WITH FLIP
- STERILIZATION WITH FLIP
REGINA glass jar for honey, 1000 g - 770 ml - 82 mm opening
H = 122 mm - Diam. = 89.8 mm - weight = 300 g
IN THERMO-PACKS of 15 (The quantity ordered refers to individual jars, not thermo-paks)
For CAPSULES:
- CLASSIC FLAT
- PASTEURIZATION WITH FLIP
- STERILIZATION WITH FLIP
€0.72Price
Cap twist-off RTS-RTO T110 (diam. 110 mm) with 8 teeth for closing glass jars containing food products. Color GOLD EDGE with notches : height = 15 mm
€0.38Price
Cap twist-off RTS-RTO T110 (diam. 110 mm) with 8 teeth for closing glass jars containing food products. Color GOLD EDGE with notches : height = 15 mm
€0.38Price
€0.38Price
CAP twist-off RTS-RTO TO 110 (diam. 110 mm) with 8 teeth for closing glass jars containing food products. Color GOLD EDGE with notches : height = 15 mm
€0.38Price
CAP twist-off RTS-RTO TO 110 (diam. 110 mm) with 8 teeth for closing glass jars containing food products. Color GOLD EDGE with notches : height = 15 mm
CAP twist-off RTS-RTO TO 110 (diam. 110 mm) with 8 teeth for closing glass jars containing food products. Color GOLD EDGE with notches : height = 15 mm
€0.38Price
Wax sheet nest sizes Dadant B. obtained by melting of PURE Wax - 100g per sheet - 5kg pack
€82.00Price
Wax sheet nest sizes Dadant B. obtained by melting of PURE Wax - 100g per sheet - 5kg pack
€82.00Price
€82.00Price
Dadant B. Nest Wax Sheets Obtained by casting PURE OPERATION - 100 g per sheet - Boxed 5 kg - 50 sheets approx. - Size: sheet 41 x 26 cmPack of 5 kg - 50 sheetsPROVENIENCE : ITALY
€82.00Price
Dadant B. Nest Wax Sheets Obtained by casting PURE OPERATION - 100 g per sheet - Boxed 5 kg - 50 sheets approx. - Size: sheet 41 x 26 cmPack of 5 kg - 50 sheetsPROVENIENCE : ITALY
Dadant B. Nest Wax Sheets Obtained by casting PURE OPERATION - 100 g per sheet - Boxed 5 kg - 50 sheets approx. - Size: sheet 41 x 26 cmPack of 5 kg - 50 sheetsPROVENIENCE : ITALY
€82.00Price
TECHNICAL SPECIFICATIONSInner diameter: 310 mmOuter diameter: 380 mmInner height: 300 mmOuter height: 400 mmCapacity: 25 litersDiathermic oil capacity: 20 litersElectrical absorption: 1000 WØ Taps: ½ inchWeight: 14 KgHeat protection: PolyethyleneWhen the melter is used in its classic version, i.e., with temperatures below 90°c, the heating element simply heats some water that must be introduced into the gap between the two containers. The thermostat, with manual temperature adjustment, keeps the temperature of the wax stable, thus avoiding dangerous overheating. The melter uses the bain-marie technique, by indirect heating to avoid overheating the wax, which would seriously damage its color, smell and texture. In the melter, either water or diathermic oil can be used as the heating liquid, depending on the use. If it is used as a sterilizer, it should be equipped with a special heating element and the heating liquid should be diathermic oil, suitable for high temperatures, instead of water.-Diathermic oil is not included
€1,100.00Price
TECHNICAL SPECIFICATIONSInner diameter: 310 mmOuter diameter: 380 mmInner height: 300 mmOuter height: 400 mmCapacity: 25 litersDiathermic oil capacity: 20 litersElectrical absorption: 1000 WØ Taps: ½ inchWeight: 14 KgHeat protection: PolyethyleneWhen the melter is used in its classic version, i.e., with temperatures below 90°c, the heating element simply heats some water that must be introduced into the gap between the two containers. The thermostat, with manual temperature adjustment, keeps the temperature of the wax stable, thus avoiding dangerous overheating. The melter uses the bain-marie technique, by indirect heating to avoid overheating the wax, which would seriously damage its color, smell and texture. In the melter, either water or diathermic oil can be used as the heating liquid, depending on the use. If it is used as a sterilizer, it should be equipped with a special heating element and the heating liquid should be diathermic oil, suitable for high temperatures, instead of water.-Diathermic oil is not included
€1,100.00Price
€1,100.00Price
Wax melter, double-walled stainless steel, with electric heating thermostat, capacity 25 liters, with heat protection. With manual temperature control 30/120 °C. Especially suitable for those who need to produce candles and wax shapes with silicone molds. THE MELTER CAN BE USED AS A WAX STERILIZER WITH ADDED DIATHERMIC OIL
€1,100.00Price
Wax melter, double-walled stainless steel, with electric heating thermostat, capacity 25 liters, with heat protection. With manual temperature control 30/120 °C. Especially suitable for those who need to produce candles and wax shapes with silicone molds. THE MELTER CAN BE USED AS A WAX STERILIZER WITH ADDED DIATHERMIC OIL
Wax melter, double-walled stainless steel, with electric heating thermostat, capacity 25 liters, with heat protection. With manual temperature control 30/120 °C. Especially suitable for those who need to produce candles and wax shapes with silicone molds. THE MELTER CAN BE USED AS A WAX STERILIZER WITH ADDED DIATHERMIC OIL
€1,100.00Price
€25.00Price
A gift card valid 1 year from purchase.The gift certificate can be used for any purchase at www.apistore.itUna once purchased, the gift certificate will be emailed to you, on it will be your PERSONAL CODE. To use it, simply copy/paste the discount code during the payment process of your next order.
€25.00Price
A gift card valid 1 year from purchase.The gift certificate can be used for any purchase at www.apistore.itUna once purchased, the gift certificate will be emailed to you, on it will be your PERSONAL CODE. To use it, simply copy/paste the discount code during the payment process of your next order.
A gift card valid 1 year from purchase.The gift certificate can be used for any purchase at www.apistore.itUna once purchased, the gift certificate will be emailed to you, on it will be your PERSONAL CODE. To use it, simply copy/paste the discount code during the payment process of your next order.
€25.00Price
€34.00Price
Stainless steel double extensible FILTER -With coarse mesh prefilter and finer mesh filterESTENSIBLE to be adapted to honey milk (25 Kg) and buckets, and Honey Maturators 50/100 Kg
€34.00Price
Stainless steel double extensible FILTER -With coarse mesh prefilter and finer mesh filterESTENSIBLE to be adapted to honey milk (25 Kg) and buckets, and Honey Maturators 50/100 Kg
Stainless steel double extensible FILTER -With coarse mesh prefilter and finer mesh filterESTENSIBLE to be adapted to honey milk (25 Kg) and buckets, and Honey Maturators 50/100 Kg
€34.00Price
€0.78Price
Glass Wine Bottle - EXPO 37.5 cl Cork Filling Cork (for stoppers see under LINKED PRODUCTS)Ø = 63 x h = 233 mm Weight = 304 gConf. in TERMOPACK of 24 pieces OPTIONS:- WHITE glass- UVAG glass (Quantity ordered refers to individual bottles, not thermopacks)
€0.78Price
Glass Wine Bottle - EXPO 37.5 cl Cork Filling Cork (for stoppers see under LINKED PRODUCTS)Ø = 63 x h = 233 mm Weight = 304 gConf. in TERMOPACK of 24 pieces OPTIONS:- WHITE glass- UVAG glass (Quantity ordered refers to individual bottles, not thermopacks)
Glass Wine Bottle - EXPO 37.5 cl Cork Filling Cork (for stoppers see under LINKED PRODUCTS)Ø = 63 x h = 233 mm Weight = 304 gConf. in TERMOPACK of 24 pieces OPTIONS:- WHITE glass- UVAG glass (Quantity ordered refers to individual bottles, not thermopacks)
€0.78Price
Physicochemical analysis Mean value Dry matter (%) 78 pH 4.5 Sugar composition : Fructose 45(% of dry matter) Glucose 24(% of dry matter) Dp2: Disaccharides 15(% of dry matter) Dp3: Trisaccharides 8(% of dry matter) DpN: Polysaccharides 8(% of dry matter)
€16.00Price
Physicochemical analysis Mean value Dry matter (%) 78 pH 4.5 Sugar composition : Fructose 45(% of dry matter) Glucose 24(% of dry matter) Dp2: Disaccharides 15(% of dry matter) Dp3: Trisaccharides 8(% of dry matter) DpN: Polysaccharides 8(% of dry matter)
€16.00Price
€16.00Price
GLUCOSE-FRUTTOSE SYRUP "FRUTTOSWEET 45" - RAW MATERIAL FOR FEEDING CAN 10 kg Fructose content 45%.
€16.00Price
GLUCOSE-FRUTTOSE SYRUP "FRUTTOSWEET 45" - RAW MATERIAL FOR FEEDING CAN 10 kg Fructose content 45%.
GLUCOSE-FRUTTOSE SYRUP "FRUTTOSWEET 45" - RAW MATERIAL FOR FEEDING CAN 10 kg Fructose content 45%.
€16.00Price
€2.00Price
CONICAL Cork stopper for GLASS BOTTLES (Fits all bottles) DIM. : min. diam. 15 - max. diam. 22 x 40 mm CHOICE PACKAGE: - 10 Pcs. - 25 Pcs. - 50 Pcs. - 100 Pcs.
€2.00Price
CONICAL Cork stopper for GLASS BOTTLES (Fits all bottles) DIM. : min. diam. 15 - max. diam. 22 x 40 mm CHOICE PACKAGE: - 10 Pcs. - 25 Pcs. - 50 Pcs. - 100 Pcs.
CONICAL Cork stopper for GLASS BOTTLES (Fits all bottles) DIM. : min. diam. 15 - max. diam. 22 x 40 mm CHOICE PACKAGE: - 10 Pcs. - 25 Pcs. - 50 Pcs. - 100 Pcs.
€2.00Price
€780.00Price
MOTORIZED BAR FOR ALLOY EXTRACTORS, DIAMETER 520 mm VARIABLE SPEED ADJUSTMENT in the 2 SENSES With 14 mm diameter shaft and Bar with length 520 mm The center pins supplied with the transmissions are interchangeable for Extractors manufactured from 2012 onward.
€780.00Price
MOTORIZED BAR FOR ALLOY EXTRACTORS, DIAMETER 520 mm VARIABLE SPEED ADJUSTMENT in the 2 SENSES With 14 mm diameter shaft and Bar with length 520 mm The center pins supplied with the transmissions are interchangeable for Extractors manufactured from 2012 onward.
MOTORIZED BAR FOR ALLOY EXTRACTORS, DIAMETER 520 mm VARIABLE SPEED ADJUSTMENT in the 2 SENSES With 14 mm diameter shaft and Bar with length 520 mm The center pins supplied with the transmissions are interchangeable for Extractors manufactured from 2012 onward.
€780.00Price
€210.00Price
LANGSTROTH MANUAL TANGENTIAL Extractor for 2 combs - with stainless steel basket( table-top) - diameter 370 mm(Code QI C54) - with plastic tap diameter 40 mm Transmission with nylon gears (Code QI I04)
€210.00Price
LANGSTROTH MANUAL TANGENTIAL Extractor for 2 combs - with stainless steel basket( table-top) - diameter 370 mm(Code QI C54) - with plastic tap diameter 40 mm Transmission with nylon gears (Code QI I04)
LANGSTROTH MANUAL TANGENTIAL Extractor for 2 combs - with stainless steel basket( table-top) - diameter 370 mm(Code QI C54) - with plastic tap diameter 40 mm Transmission with nylon gears (Code QI I04)
€210.00Price
€1,980.00Price
AUTOMATIC FILLING DOSING MACHINE FOR HONEY "AUTOMATUR" Potting machine to make the tap of ripeners automatic (to be matched) Suitable for ripeners from 50 to 400 kg with taps of various sizes Dosing for glass jars from 100 g to 2 kg Electrical power 220V - 50 Hz - 200 W
€1,980.00Price
AUTOMATIC FILLING DOSING MACHINE FOR HONEY "AUTOMATUR" Potting machine to make the tap of ripeners automatic (to be matched) Suitable for ripeners from 50 to 400 kg with taps of various sizes Dosing for glass jars from 100 g to 2 kg Electrical power 220V - 50 Hz - 200 W
AUTOMATIC FILLING DOSING MACHINE FOR HONEY "AUTOMATUR" Potting machine to make the tap of ripeners automatic (to be matched) Suitable for ripeners from 50 to 400 kg with taps of various sizes Dosing for glass jars from 100 g to 2 kg Electrical power 220V - 50 Hz - 200 W
€1,980.00Price
OPTIONAL Electro-welded galvanized sheet metal box ROOF for 6-frame Beehives. Wood and mesh transport COVER for 6-frame Beehives. POLYSTYRENE COVER NUTRIER FOR 6-FAV Beehives for Quarti Beehives Art .....A new shape makes it unique and practical for feeding candy in pouches or not, or liquid food. The position of the central hole, into which all the liquid product flows thanks to the sloping bottom, also allows you to place a round feeder from Art N01, or use it as it comes complete with polystyrene bell and transparent plastic cover bell Art.C97. It has a capacity of Lt 3.To close the feeder, the polystyrene lid of the Beehive is reused. The electrowelded sheet metal cover code..... covers the NUTRIER A COVER preventing any water infiltration Honey super from 6 frames - H 17 cm Polystyrene diaphragm Side edge reinforcer Spacer (cod. D32 ) Wooden COVER and transport net for 6-frame Beehives POLYSTYRENE COVER and transport net for 6-frame Beehives POLYSTYRENE REPLACEMENT COVER for 6-frame Beehive PORTICINE ( cod. P21 )
€25.00Price
OPTIONAL Electro-welded galvanized sheet metal box ROOF for 6-frame Beehives. Wood and mesh transport COVER for 6-frame Beehives. POLYSTYRENE COVER NUTRIER FOR 6-FAV Beehives for Quarti Beehives Art .....A new shape makes it unique and practical for feeding candy in pouches or not, or liquid food. The position of the central hole, into which all the liquid product flows thanks to the sloping bottom, also allows you to place a round feeder from Art N01, or use it as it comes complete with polystyrene bell and transparent plastic cover bell Art.C97. It has a capacity of Lt 3.To close the feeder, the polystyrene lid of the Beehive is reused. The electrowelded sheet metal cover code..... covers the NUTRIER A COVER preventing any water infiltration Honey super from 6 frames - H 17 cm Polystyrene diaphragm Side edge reinforcer Spacer (cod. D32 ) Wooden COVER and transport net for 6-frame Beehives POLYSTYRENE COVER and transport net for 6-frame Beehives POLYSTYRENE REPLACEMENT COVER for 6-frame Beehive PORTICINE ( cod. P21 )
€25.00Price
€25.00Price
Beehives 6 honeycomb high density polystyrene " Langstroth "6 Langstroth honeycombs ( not included ) Lateral net at the bottom fixed anti-varroa ( 320x62 mm ) front opening HIGH polystyrene density (80) anti movement spacers honeycombs on the bottom pastel green color for langstroth honeycombs size 483x231 with polystyrene closing cover Wall thickness 20 mm
€25.00Price
Beehives 6 honeycomb high density polystyrene " Langstroth "6 Langstroth honeycombs ( not included ) Lateral net at the bottom fixed anti-varroa ( 320x62 mm ) front opening HIGH polystyrene density (80) anti movement spacers honeycombs on the bottom pastel green color for langstroth honeycombs size 483x231 with polystyrene closing cover Wall thickness 20 mm
Beehives 6 honeycomb high density polystyrene " Langstroth "6 Langstroth honeycombs ( not included ) Lateral net at the bottom fixed anti-varroa ( 320x62 mm ) front opening HIGH polystyrene density (80) anti movement spacers honeycombs on the bottom pastel green color for langstroth honeycombs size 483x231 with polystyrene closing cover Wall thickness 20 mm
€25.00Price
€12.00Price
Bee escape board for 10-frame D.B. Beehives 43 x 50 cm, made of 100% RECYCLABLE plastic. - With rise in stainless steel PLASTIC Bee escape , sturdy, durable and easy to clean (hydro-jet) BASE board with Bee escape with OPTIONS : 2-way, 8-way, 16-way, lozenge. - For the model with 2 WAYS only, no fastening is needed simply insert it into the appropriate housing - For the remaining models ( 8 WAYS, 16 WAYS, LOSANGE) the BASE BOARD + APISCAMPO + FIXING SCREWS is supplied.
€12.00Price
Bee escape board for 10-frame D.B. Beehives 43 x 50 cm, made of 100% RECYCLABLE plastic. - With rise in stainless steel PLASTIC Bee escape , sturdy, durable and easy to clean (hydro-jet) BASE board with Bee escape with OPTIONS : 2-way, 8-way, 16-way, lozenge. - For the model with 2 WAYS only, no fastening is needed simply insert it into the appropriate housing - For the remaining models ( 8 WAYS, 16 WAYS, LOSANGE) the BASE BOARD + APISCAMPO + FIXING SCREWS is supplied.
Bee escape board for 10-frame D.B. Beehives 43 x 50 cm, made of 100% RECYCLABLE plastic. - With rise in stainless steel PLASTIC Bee escape , sturdy, durable and easy to clean (hydro-jet) BASE board with Bee escape with OPTIONS : 2-way, 8-way, 16-way, lozenge. - For the model with 2 WAYS only, no fastening is needed simply insert it into the appropriate housing - For the remaining models ( 8 WAYS, 16 WAYS, LOSANGE) the BASE BOARD + APISCAMPO + FIXING SCREWS is supplied.
€12.00Price
Its unique shape allows it to be placed on all Beehives, Dadant Blatt, with or without a porch, and Langstroth polystyrene Beehives The pollen detachable grid with trapezoidal hole for bee passage has the ability to rotate to be held open or closed. The grids have 3 rows at the bottom, while laterally the bee passage goes up.A rib on both faces of the grid, at the holes and beyond, allows the bees to cling to then pass more easily.If at the placement of the trap on the Beehive, the pollen collection plate is left open, it makes it easier for the bees to recognize a new passage, reducing once it is lowered (closed) any entanglement.A very wide slit, before the pollen collection tray, allows the bees to remove dirt from the Beehive.Two side holes serve as drones passageA very wide roof provides good shelter for the trap from the weather. The tray, has excellent aeration and can hold up to 800 gr. of pollen. The professional pollen trap also comes with an anti Asian wasp net.The anti wasp net, lowered allows the bees to enter and exit with much more peace of mind since, the Asian wasp or velutin wasp cannot attack the beesThe trap is made entirely of 100% recyclable food grade plastic material, assembled without the use of screws, nails or toxic glues.
€24.00Price
Its unique shape allows it to be placed on all Beehives, Dadant Blatt, with or without a porch, and Langstroth polystyrene Beehives The pollen detachable grid with trapezoidal hole for bee passage has the ability to rotate to be held open or closed. The grids have 3 rows at the bottom, while laterally the bee passage goes up.A rib on both faces of the grid, at the holes and beyond, allows the bees to cling to then pass more easily.If at the placement of the trap on the Beehive, the pollen collection plate is left open, it makes it easier for the bees to recognize a new passage, reducing once it is lowered (closed) any entanglement.A very wide slit, before the pollen collection tray, allows the bees to remove dirt from the Beehive.Two side holes serve as drones passageA very wide roof provides good shelter for the trap from the weather. The tray, has excellent aeration and can hold up to 800 gr. of pollen. The professional pollen trap also comes with an anti Asian wasp net.The anti wasp net, lowered allows the bees to enter and exit with much more peace of mind since, the Asian wasp or velutin wasp cannot attack the beesThe trap is made entirely of 100% recyclable food grade plastic material, assembled without the use of screws, nails or toxic glues.
€24.00Price
€24.00Price
PROFESSIONAL PLASTIC POLL COLLECTION TRAP with trapezoidal-hole grid plus Asian wasp net.The Trap comes complete with: Metal adapters for attachment to D.B. 10 Beehives porch beehives (QI No. V18) - Removable plastic tray.Its special shape, allows it to be placed on all 10-frame Beehives : Dadant Blatt, with or without a small porch, Langstroth, plastic and polystyrene Two different mounting solutions, using the rails for attaching the metal entrance hatch, or frontally to the Beehive, by mounting two optional ADAPTERS (No. 2 art. QI A96) it can be attached to CUBE Beehives, and polystyrene or plastic movable bottom (art. QI F62)
€24.00Price
PROFESSIONAL PLASTIC POLL COLLECTION TRAP with trapezoidal-hole grid plus Asian wasp net.The Trap comes complete with: Metal adapters for attachment to D.B. 10 Beehives porch beehives (QI No. V18) - Removable plastic tray.Its special shape, allows it to be placed on all 10-frame Beehives : Dadant Blatt, with or without a small porch, Langstroth, plastic and polystyrene Two different mounting solutions, using the rails for attaching the metal entrance hatch, or frontally to the Beehive, by mounting two optional ADAPTERS (No. 2 art. QI A96) it can be attached to CUBE Beehives, and polystyrene or plastic movable bottom (art. QI F62)
PROFESSIONAL PLASTIC POLL COLLECTION TRAP with trapezoidal-hole grid plus Asian wasp net.The Trap comes complete with: Metal adapters for attachment to D.B. 10 Beehives porch beehives (QI No. V18) - Removable plastic tray.Its special shape, allows it to be placed on all 10-frame Beehives : Dadant Blatt, with or without a small porch, Langstroth, plastic and polystyrene Two different mounting solutions, using the rails for attaching the metal entrance hatch, or frontally to the Beehive, by mounting two optional ADAPTERS (No. 2 art. QI A96) it can be attached to CUBE Beehives, and polystyrene or plastic movable bottom (art. QI F62)
€24.00Price
€1.60Price
D.B. HOFFMAN self-spacing NEST CANVAS with wire Dimensions: H=21.7 cm L=30 cm - Hoffman side 37 mm
€1.60Price
D.B. HOFFMAN self-spacing NEST CANVAS with wire Dimensions: H=21.7 cm L=30 cm - Hoffman side 37 mm
D.B. HOFFMAN self-spacing NEST CANVAS with wire Dimensions: H=21.7 cm L=30 cm - Hoffman side 37 mm
€1.60Price
Complete with : Cable cover with mounted 4-position disc; Electrogalvanized sheet metal cover; Metal door; 3 Connection corners; 10-notch spacers and bottom spacer; Fixed or movable anti-moth net bottom with galvanized sheet metal bottom tray removable from the back; Seasoned fir wood 25mm thick; Walls assembled with screws; Frame rest NEST BODY: Internal measurements(bottom excluded): 380mm x 462mm h 245mm; Eternal measurements: 430mm x 510mm h 245mm BOTTOM: 430mm x 542mm h 70mm BOTTOM: 430mm x 510mm h 80mm BOTTOM: 430mm x 510mm h 80mm BOTTOM: 430mm x 510mm h 80mm
€96.00Price
Complete with : Cable cover with mounted 4-position disc; Electrogalvanized sheet metal cover; Metal door; 3 Connection corners; 10-notch spacers and bottom spacer; Fixed or movable anti-moth net bottom with galvanized sheet metal bottom tray removable from the back; Seasoned fir wood 25mm thick; Walls assembled with screws; Frame rest NEST BODY: Internal measurements(bottom excluded): 380mm x 462mm h 245mm; Eternal measurements: 430mm x 510mm h 245mm BOTTOM: 430mm x 542mm h 70mm BOTTOM: 430mm x 510mm h 80mm BOTTOM: 430mm x 510mm h 80mm BOTTOM: 430mm x 510mm h 80mm
€96.00Price
€96.00Price
LANGSTROTH 10-frame Beehives with fixed or movable anti-varroa mesh bottom at choice. Nest only (Frames not included) Available with and without painting
€96.00Price
LANGSTROTH 10-frame Beehives with fixed or movable anti-varroa mesh bottom at choice. Nest only (Frames not included) Available with and without painting
LANGSTROTH 10-frame Beehives with fixed or movable anti-varroa mesh bottom at choice. Nest only (Frames not included) Available with and without painting
€96.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€28.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€28.00Price
€28.00Price
Mold height: 75 mm - Wick: 3 mm - Weight: 70 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€28.00Price
Mold height: 75 mm - Wick: 3 mm - Weight: 70 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 75 mm - Wick: 3 mm - Weight: 70 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€28.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€20.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€20.80Price
€20.80Price
Mold height: 60 mm - Wick: 3 mm - Weight: 20 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€20.80Price
Mold height: 60 mm - Wick: 3 mm - Weight: 20 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 60 mm - Wick: 3 mm - Weight: 20 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€20.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€40.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€40.80Price
€40.80Price
Silicone candle mold with PRINTED CUBE 60 mmMold height: 60 mm - Wick: 2 mm - Weight: 140 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€40.80Price
Silicone candle mold with PRINTED CUBE 60 mmMold height: 60 mm - Wick: 2 mm - Weight: 140 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle mold with PRINTED CUBE 60 mmMold height: 60 mm - Wick: 2 mm - Weight: 140 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€40.80Price
€4.00Price
ROUND NUTRATOR DIAMETER 20 cm - height 5 cm (type "BARAVALLE) Lower part protruding for better attachment on the hole of the cable cover
€4.00Price
ROUND NUTRATOR DIAMETER 20 cm - height 5 cm (type "BARAVALLE) Lower part protruding for better attachment on the hole of the cable cover
ROUND NUTRATOR DIAMETER 20 cm - height 5 cm (type "BARAVALLE) Lower part protruding for better attachment on the hole of the cable cover
€4.00Price
€21.50Price
Environmentally friendly water-based self-leveling enamel for wood and plaster. It provides excellent protection and is highly washable. Available colors : SKY BLUE, OCHRE YELLOW, RED, GREEN, TURQUOISE, VIOLET, BEIGE and BROWN
€21.50Price
Environmentally friendly water-based self-leveling enamel for wood and plaster. It provides excellent protection and is highly washable. Available colors : SKY BLUE, OCHRE YELLOW, RED, GREEN, TURQUOISE, VIOLET, BEIGE and BROWN
Environmentally friendly water-based self-leveling enamel for wood and plaster. It provides excellent protection and is highly washable. Available colors : SKY BLUE, OCHRE YELLOW, RED, GREEN, TURQUOISE, VIOLET, BEIGE and BROWN
€21.50Price
€0.50Price
Suitable for direct food contact Measures 75 x 75 x 75 mm Suitable for holding a 130 g jar of honey (SEE QUANTITY DISCOUNT)
€0.50Price
Suitable for direct food contact Measures 75 x 75 x 75 mm Suitable for holding a 130 g jar of honey (SEE QUANTITY DISCOUNT)
Suitable for direct food contact Measures 75 x 75 x 75 mm Suitable for holding a 130 g jar of honey (SEE QUANTITY DISCOUNT)
€0.50Price
€0.73Price
Hexagonal glass jar 314 ml - for HONEY 400 g - with TWIST-OFF TO 63 Cap (diam. 63 mm) h = 101 mm diam. = 79 mm weight = 200 g IN TERMOPACHS of 18 pieces
€0.73Price
Hexagonal glass jar 314 ml - for HONEY 400 g - with TWIST-OFF TO 63 Cap (diam. 63 mm) h = 101 mm diam. = 79 mm weight = 200 g IN TERMOPACHS of 18 pieces
Hexagonal glass jar 314 ml - for HONEY 400 g - with TWIST-OFF TO 63 Cap (diam. 63 mm) h = 101 mm diam. = 79 mm weight = 200 g IN TERMOPACHS of 18 pieces
€0.73Price
AIR TECH fabric is a breathable fabric, suitable for those who particularly suffer from heat. The special mesh it is made of allows breathability while providing protection from DOTS.
€62.00Price
AIR TECH fabric is a breathable fabric, suitable for those who particularly suffer from heat. The special mesh it is made of allows breathability while providing protection from DOTS.
€62.00Price
€62.00Price
A beekeeper's jacket, made of ventilated and breathable "AIR TECH" fabric, with a removable black aluminum mesh round hat mask.
The beekeeper's jacket made of ventilated fabric is especially comfortable and keeps you from sweating even on the hottest days while providing great freedom of movement and maximum protection from stings.The ventilated fabric combined with quality workmanship and attention to detail make this jacket perfect for your work.
The jacket is wash resistant and conveniently machine washable to effectively remove dirt.The mask should be removed and washed separately by hand.
The zippers are wide to ensure strength and ease of grip even with gloves. The practical front pockets are perfect for storing your cell phone (even large ones), keys and equipment.Elastic bands at the wrists allow the sleeves to fit completely against the body, thus preventing them from curling.
Available size: S-M-L-XL-XXL-XXXL
€62.00Price
A beekeeper's jacket, made of ventilated and breathable "AIR TECH" fabric, with a removable black aluminum mesh round hat mask.
The beekeeper's jacket made of ventilated fabric is especially comfortable and keeps you from sweating even on the hottest days while providing great freedom of movement and maximum protection from stings.The ventilated fabric combined with quality workmanship and attention to detail make this jacket perfect for your work.
The jacket is wash resistant and conveniently machine washable to effectively remove dirt.The mask should be removed and washed separately by hand.
The zippers are wide to ensure strength and ease of grip even with gloves. The practical front pockets are perfect for storing your cell phone (even large ones), keys and equipment.Elastic bands at the wrists allow the sleeves to fit completely against the body, thus preventing them from curling.
Available size: S-M-L-XL-XXL-XXXL
A beekeeper's jacket, made of ventilated and breathable "AIR TECH" fabric, with a removable black aluminum mesh round hat mask.
The beekeeper's jacket made of ventilated fabric is especially comfortable and keeps you from sweating even on the hottest days while providing great freedom of movement and maximum protection from stings.The ventilated fabric combined with quality workmanship and attention to detail make this jacket perfect for your work.
The jacket is wash resistant and conveniently machine washable to effectively remove dirt.The mask should be removed and washed separately by hand.
The zippers are wide to ensure strength and ease of grip even with gloves. The practical front pockets are perfect for storing your cell phone (even large ones), keys and equipment.Elastic bands at the wrists allow the sleeves to fit completely against the body, thus preventing them from curling.
Available size: S-M-L-XL-XXL-XXXL
€62.00Price
Practical PVC boot for working safely in the apiary or vegetable garden Iron tip
€24.00Price
Practical PVC boot for working safely in the apiary or vegetable garden Iron tip
€24.00Price
€24.00Price
Yellow PVC boot for apiary or vegetable garden
Available numbers: 38 to 45
€24.00Price
Yellow PVC boot for apiary or vegetable garden
Available numbers: 38 to 45
Yellow PVC boot for apiary or vegetable garden
Available numbers: 38 to 45
€24.00Price
€58.00Price
Cotton beekeeper suit with square aluminum mesh veil detachable by zipper.
Front opening and elastic cuffs at wrists and ankles.
Available size: S-M-L-XL-XXL-XXXL
€58.00Price
Cotton beekeeper suit with square aluminum mesh veil detachable by zipper.
Front opening and elastic cuffs at wrists and ankles.
Available size: S-M-L-XL-XXL-XXXL
Cotton beekeeper suit with square aluminum mesh veil detachable by zipper.
Front opening and elastic cuffs at wrists and ankles.
Available size: S-M-L-XL-XXL-XXXL
€58.00Price
€19.00Price
Square mask made of aluminum mesh, with underarm elastics and hat made of double yellow cotton fabric.
€19.00Price
Square mask made of aluminum mesh, with underarm elastics and hat made of double yellow cotton fabric.
Square mask made of aluminum mesh, with underarm elastics and hat made of double yellow cotton fabric.
€19.00Price
€1.30Price
Cardboard gift box for No. 1 bottle In ONDULATED CANNET series BROWN Size: 8.5 x 8.5 x h 40 cm Practical window to view the product. The box is delivered unfolded and is self-assembling (easy to assemble in a few simple moves) SEE QUANTITY DISCOUNT
€1.30Price
Cardboard gift box for No. 1 bottle In ONDULATED CANNET series BROWN Size: 8.5 x 8.5 x h 40 cm Practical window to view the product. The box is delivered unfolded and is self-assembling (easy to assemble in a few simple moves) SEE QUANTITY DISCOUNT
Cardboard gift box for No. 1 bottle In ONDULATED CANNET series BROWN Size: 8.5 x 8.5 x h 40 cm Practical window to view the product. The box is delivered unfolded and is self-assembling (easy to assemble in a few simple moves) SEE QUANTITY DISCOUNT
€1.30Price
Parabolic DESIGN with 6 panels for less internal condensation. Filters attach by bayonet connection: guided connection, quick and easy to open and close. VERSATILITY: Due to the low profile it allows excellent compatibility with the combined use of safety glasses, as well as with the use of other protective equipment. One size fits all face shapes. COMFORT: Flexible and adjustable for comfort during extended use. Dual headband support system at the head and neck, more comfortable. Can be worn around the neck when not in use. Front adjustment of the headband. Greater breathing comfort due to its two filters and exhalation valve. Quick opening and closing system. ERGONOMICS: Ergonomically designed contact area to ensure an excellent fit to the face, thanks to the chin and side adjustment for optimal fit to any face shape (round, elongated, small and large). Design designed to cover as wide a range of facial physiognomies as possible.
€27.00Price
Parabolic DESIGN with 6 panels for less internal condensation. Filters attach by bayonet connection: guided connection, quick and easy to open and close. VERSATILITY: Due to the low profile it allows excellent compatibility with the combined use of safety glasses, as well as with the use of other protective equipment. One size fits all face shapes. COMFORT: Flexible and adjustable for comfort during extended use. Dual headband support system at the head and neck, more comfortable. Can be worn around the neck when not in use. Front adjustment of the headband. Greater breathing comfort due to its two filters and exhalation valve. Quick opening and closing system. ERGONOMICS: Ergonomically designed contact area to ensure an excellent fit to the face, thanks to the chin and side adjustment for optimal fit to any face shape (round, elongated, small and large). Design designed to cover as wide a range of facial physiognomies as possible.
€27.00Price
€27.00Price
AIR II semi-facial mask with or without filters Filters (pair) - Filters (pair) with bayonet attachment OPTIONS:- Mask only- Pair of filters for OSSALIC ACID (brown) Cod. PI 484/FO)- Pair of filters for FORMIUM ACID (yellow) (Cod. PI 484/FF)Manufactured from hypoallergenic TPE: very soft and comfortable material. Provides excellent protection, comfort and adjustment. Provides resistance to heat and moisture, and is not attacked by ozone. Hydrophobic and non-toxicEN 140 (Respiratory protective devices: Half masks and quarter masks) Supplementary standards:EN 143 (Respiratory protective devices: Particle filters)EN 14387 (Respiratory protective devices: Gas and combination filters)
€27.00Price
AIR II semi-facial mask with or without filters Filters (pair) - Filters (pair) with bayonet attachment OPTIONS:- Mask only- Pair of filters for OSSALIC ACID (brown) Cod. PI 484/FO)- Pair of filters for FORMIUM ACID (yellow) (Cod. PI 484/FF)Manufactured from hypoallergenic TPE: very soft and comfortable material. Provides excellent protection, comfort and adjustment. Provides resistance to heat and moisture, and is not attacked by ozone. Hydrophobic and non-toxicEN 140 (Respiratory protective devices: Half masks and quarter masks) Supplementary standards:EN 143 (Respiratory protective devices: Particle filters)EN 14387 (Respiratory protective devices: Gas and combination filters)
AIR II semi-facial mask with or without filters Filters (pair) - Filters (pair) with bayonet attachment OPTIONS:- Mask only- Pair of filters for OSSALIC ACID (brown) Cod. PI 484/FO)- Pair of filters for FORMIUM ACID (yellow) (Cod. PI 484/FF)Manufactured from hypoallergenic TPE: very soft and comfortable material. Provides excellent protection, comfort and adjustment. Provides resistance to heat and moisture, and is not attacked by ozone. Hydrophobic and non-toxicEN 140 (Respiratory protective devices: Half masks and quarter masks) Supplementary standards:EN 143 (Respiratory protective devices: Particle filters)EN 14387 (Respiratory protective devices: Gas and combination filters)
€27.00Price
LANGSTROTH wax sheets obtained by casting PURO OPERCOLO
€1.75Price
LANGSTROTH wax sheets obtained by casting PURO OPERCOLO
€1.75Price
€1.75Price
Wax sheets LANGSTROTH obtained by fusion PURO OPERCOLO - 88 g per sheet Sheet size 42 x 20 cm PROVENANCE : ITALY
€1.75Price
Wax sheets LANGSTROTH obtained by fusion PURO OPERCOLO - 88 g per sheet Sheet size 42 x 20 cm PROVENANCE : ITALY
Wax sheets LANGSTROTH obtained by fusion PURO OPERCOLO - 88 g per sheet Sheet size 42 x 20 cm PROVENANCE : ITALY
€1.75Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€21.20Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€21.20Price
€21.20Price
Mold height: 80 mm - Diameter: 30 mm - Wick: 3 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€21.20Price
Mold height: 80 mm - Diameter: 30 mm - Wick: 3 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Mold height: 80 mm - Diameter: 30 mm - Wick: 3 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€21.20Price
€0.17Price
DEEP CAPSULE H14 TO 58 for 212 ml and 314 ml PLUS jars
AVAILABLE COLORS: GOLD - SILVER
Diameter 58 mm - Height 14 mm
BOX of 1100 pieces
€0.17Price
DEEP CAPSULE H14 TO 58 for 212 ml and 314 ml PLUS jars
AVAILABLE COLORS: GOLD - SILVER
Diameter 58 mm - Height 14 mm
BOX of 1100 pieces
DEEP CAPSULE H14 TO 58 for 212 ml and 314 ml PLUS jars
AVAILABLE COLORS: GOLD - SILVER
Diameter 58 mm - Height 14 mm
BOX of 1100 pieces
€0.17Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold with wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€38.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold with wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€38.00Price
€38.00Price
Silicone candle mold with STRAIGHT STEL 20 cmMold height: 200 mm - Diameter: 18 mm - Weight: 35 g - Wick: 3 mmSilicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€38.00Price
Silicone candle mold with STRAIGHT STEL 20 cmMold height: 200 mm - Diameter: 18 mm - Weight: 35 g - Wick: 3 mmSilicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle mold with STRAIGHT STEL 20 cmMold height: 200 mm - Diameter: 18 mm - Weight: 35 g - Wick: 3 mmSilicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€38.00Price
€1.12Price
Aluminum container with screw cap for cosmetic use Dimensions: h 2 cm - diameter 3.6 cm
€1.12Price
Aluminum container with screw cap for cosmetic use Dimensions: h 2 cm - diameter 3.6 cm
Aluminum container with screw cap for cosmetic use Dimensions: h 2 cm - diameter 3.6 cm
€1.12Price
€2.70Price
WHITE GLASS BOTTLE with cork stopper h = 32 cm diam = 5.5 cm Mouth diameter 2 cm Capacity: 500 ml (Quantity ordered refers to individual jars, not thermopacks)
€2.70Price
WHITE GLASS BOTTLE with cork stopper h = 32 cm diam = 5.5 cm Mouth diameter 2 cm Capacity: 500 ml (Quantity ordered refers to individual jars, not thermopacks)
WHITE GLASS BOTTLE with cork stopper h = 32 cm diam = 5.5 cm Mouth diameter 2 cm Capacity: 500 ml (Quantity ordered refers to individual jars, not thermopacks)
€2.70Price
€46.00Price
PLASTIC FOOD PLASTIC 50 kg HONEY MATURATOR with lid and faucetDiameter: 39 cm - Height 41 cmCUT NYLON 40 mmVolume 35 liters Dimensions: diameter 39 cm - Height 41 cm
€46.00Price
PLASTIC FOOD PLASTIC 50 kg HONEY MATURATOR with lid and faucetDiameter: 39 cm - Height 41 cmCUT NYLON 40 mmVolume 35 liters Dimensions: diameter 39 cm - Height 41 cm
PLASTIC FOOD PLASTIC 50 kg HONEY MATURATOR with lid and faucetDiameter: 39 cm - Height 41 cmCUT NYLON 40 mmVolume 35 liters Dimensions: diameter 39 cm - Height 41 cm
€46.00Price
Publication collected and granted by Giampaolo Palmieri historical documentarian of APAS (Association of Beekeeping Producers Sondrio)
Publication collected and granted by Giampaolo Palmieri historical documentarian of APAS (Association of Beekeeping Producers Sondrio)
HISTORICAL DOCUMENT : ETTORE LIBRINA & FIGLIO - FABRICA MATERIALE APISTICO E FORNITURE D'API - Talamona VALTELLINA - GENERAL CATALOGUE 1925 ! PRICES THE MILDEST IN THE ITALIAN MARKET ! PRODUCT IN THE SHOWCASE : Domina - Swarms "LIBRINA" (Patented) (SEE DOWNLOAD) PLEASE TAKE NOTICE THAT THE ITEMS IN THIS CATALOG ARE ALL OUT OF PRODUCTION
HISTORICAL DOCUMENT : ETTORE LIBRINA & FIGLIO - FABRICA MATERIALE APISTICO E FORNITURE D'API - Talamona VALTELLINA - GENERAL CATALOGUE 1925 ! PRICES THE MILDEST IN THE ITALIAN MARKET ! PRODUCT IN THE SHOWCASE : Domina - Swarms "LIBRINA" (Patented) (SEE DOWNLOAD) PLEASE TAKE NOTICE THAT THE ITEMS IN THIS CATALOG ARE ALL OUT OF PRODUCTION
HISTORICAL DOCUMENT : ETTORE LIBRINA & FIGLIO - FABRICA MATERIALE APISTICO E FORNITURE D'API - Talamona VALTELLINA - GENERAL CATALOGUE 1925 ! PRICES THE MILDEST IN THE ITALIAN MARKET ! PRODUCT IN THE SHOWCASE : Domina - Swarms "LIBRINA" (Patented) (SEE DOWNLOAD) PLEASE TAKE NOTICE THAT THE ITEMS IN THIS CATALOG ARE ALL OUT OF PRODUCTION
€18.00Price
Clamp for 40 mm-1"1/2 stainless steel GAROLLA connection for food pipe for honey or other
€18.00Price
Clamp for 40 mm-1"1/2 stainless steel GAROLLA connection for food pipe for honey or other
Clamp for 40 mm-1"1/2 stainless steel GAROLLA connection for food pipe for honey or other
€18.00Price
€48.00Price
Full-diameter stainless steel mesh FILTER for 25 and 50 kg ripeners - 31 cm diameter With full-diameter NYLON FILTER for 25/50 kg ripeners - With lanyard for attachment to the ripener The stainless steel mesh filter allows an initial filtration of the honey , the nylon filter an additional finer filtration OPTIONS: -SILVER FILTER + NYLON FILTER -HYMNYLON FILTER ONLY -Spare (QI Code F48)
€48.00Price
Full-diameter stainless steel mesh FILTER for 25 and 50 kg ripeners - 31 cm diameter With full-diameter NYLON FILTER for 25/50 kg ripeners - With lanyard for attachment to the ripener The stainless steel mesh filter allows an initial filtration of the honey , the nylon filter an additional finer filtration OPTIONS: -SILVER FILTER + NYLON FILTER -HYMNYLON FILTER ONLY -Spare (QI Code F48)
Full-diameter stainless steel mesh FILTER for 25 and 50 kg ripeners - 31 cm diameter With full-diameter NYLON FILTER for 25/50 kg ripeners - With lanyard for attachment to the ripener The stainless steel mesh filter allows an initial filtration of the honey , the nylon filter an additional finer filtration OPTIONS: -SILVER FILTER + NYLON FILTER -HYMNYLON FILTER ONLY -Spare (QI Code F48)
€48.00Price
€0.65Price
Clear plastic jar with white plastic lid with tab for package integrityCapacity 760 ml for 1000 g honeyDiameter: 10 cm Height: 12 cm
€0.65Price
Clear plastic jar with white plastic lid with tab for package integrityCapacity 760 ml for 1000 g honeyDiameter: 10 cm Height: 12 cm
Clear plastic jar with white plastic lid with tab for package integrityCapacity 760 ml for 1000 g honeyDiameter: 10 cm Height: 12 cm
€0.65Price
€1.10Price
ERGO 580 T70 Tall Glass Jar for Honey, 920 g - 580 ml (glass only)
For CAPSULES:
- CLASSIC FLAT
- PASTEURIZATION WITH FLIP
- STERILIZATION WITH FLIP
H = 188 mm - Diam. = 73 mm - Weight 330 g
In a 24-piece heat-pack
€1.10Price
ERGO 580 T70 Tall Glass Jar for Honey, 920 g - 580 ml (glass only)
For CAPSULES:
- CLASSIC FLAT
- PASTEURIZATION WITH FLIP
- STERILIZATION WITH FLIP
H = 188 mm - Diam. = 73 mm - Weight 330 g
In a 24-piece heat-pack
ERGO 580 T70 Tall Glass Jar for Honey, 920 g - 580 ml (glass only)
For CAPSULES:
- CLASSIC FLAT
- PASTEURIZATION WITH FLIP
- STERILIZATION WITH FLIP
H = 188 mm - Diam. = 73 mm - Weight 330 g
In a 24-piece heat-pack
€1.10Price
€130.00Price
Chrome-plated TANGENTIAL BOWL for NIBBIO extractor for 3 nest frames or 6 Honey super frames DADANT - Extractor diameter 520 mm - pin hole diameter 14 mm Panels 345 X 390 mm
€130.00Price
Chrome-plated TANGENTIAL BOWL for NIBBIO extractor for 3 nest frames or 6 Honey super frames DADANT - Extractor diameter 520 mm - pin hole diameter 14 mm Panels 345 X 390 mm
Chrome-plated TANGENTIAL BOWL for NIBBIO extractor for 3 nest frames or 6 Honey super frames DADANT - Extractor diameter 520 mm - pin hole diameter 14 mm Panels 345 X 390 mm
€130.00Price
€630.00Price
RADIAL D.B. MANUAL Extractor with BRAKE with STAINLESS STEEL basket for 9 Honey super frames or 3 nest frames - Diameter 525 mm For nest frames need No. 3 additional cages (Code GN 160GND9) NOT INCLUDED New welded bottom that improves honey discharge with Ø 40 mm nylon CUT RUBBER
€630.00Price
RADIAL D.B. MANUAL Extractor with BRAKE with STAINLESS STEEL basket for 9 Honey super frames or 3 nest frames - Diameter 525 mm For nest frames need No. 3 additional cages (Code GN 160GND9) NOT INCLUDED New welded bottom that improves honey discharge with Ø 40 mm nylon CUT RUBBER
RADIAL D.B. MANUAL Extractor with BRAKE with STAINLESS STEEL basket for 9 Honey super frames or 3 nest frames - Diameter 525 mm For nest frames need No. 3 additional cages (Code GN 160GND9) NOT INCLUDED New welded bottom that improves honey discharge with Ø 40 mm nylon CUT RUBBER
€630.00Price
€14.00Price
POSTER "THE WORLD OF BEES" - Made of plasticized cardboard , printed in color Size: 70 x 100 cm
€14.00Price
POSTER "THE WORLD OF BEES" - Made of plasticized cardboard , printed in color Size: 70 x 100 cm
POSTER "THE WORLD OF BEES" - Made of plasticized cardboard , printed in color Size: 70 x 100 cm
€14.00Price
€235.00Price
TORCH PRESS FOR Wax and FRUIT OPERCULES - with SCREW Ø 20 cm - STAINLESS STEEL CAGE - painted steel support Suitable for manual pressing of Wax, Fruit,Vinacce, Myrtle, etc. opercula. Tilting frame for ease of use Cage size : 20 x 35 cm Cage capacity : 9 L Weight : 10 kg MADE IN ITALY
€235.00Price
TORCH PRESS FOR Wax and FRUIT OPERCULES - with SCREW Ø 20 cm - STAINLESS STEEL CAGE - painted steel support Suitable for manual pressing of Wax, Fruit,Vinacce, Myrtle, etc. opercula. Tilting frame for ease of use Cage size : 20 x 35 cm Cage capacity : 9 L Weight : 10 kg MADE IN ITALY
TORCH PRESS FOR Wax and FRUIT OPERCULES - with SCREW Ø 20 cm - STAINLESS STEEL CAGE - painted steel support Suitable for manual pressing of Wax, Fruit,Vinacce, Myrtle, etc. opercula. Tilting frame for ease of use Cage size : 20 x 35 cm Cage capacity : 9 L Weight : 10 kg MADE IN ITALY
€235.00Price
€79.00Price
STAINLESS STEEL CYLINDRICAL UNDER EXTRACTOR 25 kg bucket - with handle and lid - without tap hole - Ø 29 cm - height 33 cm
€79.00Price
STAINLESS STEEL CYLINDRICAL UNDER EXTRACTOR 25 kg bucket - with handle and lid - without tap hole - Ø 29 cm - height 33 cm
STAINLESS STEEL CYLINDRICAL UNDER EXTRACTOR 25 kg bucket - with handle and lid - without tap hole - Ø 29 cm - height 33 cm
€79.00Price
€15.00Price
Wood screw - galvanized steel - 5.0 x 20 mm - Length 20 mm - Thread- domed head - TORX TX20 screwdriver socket For mounting Beehives handles (Conf. box of 500 pcs.)
€15.00Price
Wood screw - galvanized steel - 5.0 x 20 mm - Length 20 mm - Thread- domed head - TORX TX20 screwdriver socket For mounting Beehives handles (Conf. box of 500 pcs.)
Wood screw - galvanized steel - 5.0 x 20 mm - Length 20 mm - Thread- domed head - TORX TX20 screwdriver socket For mounting Beehives handles (Conf. box of 500 pcs.)
€15.00Price
Protective beekeeping jacket including detachable square mask with zipper. Equipped with elastic cuffs.
€36.00Price
Protective beekeeping jacket including detachable square mask with zipper. Equipped with elastic cuffs.
€36.00Price
€36.00Price
Beekeeping jacket with square veil in aluminum mesh, yellow cotton canvas
Sizes available S-M-L-XL-XXL-XXXL
€36.00Price
Beekeeping jacket with square veil in aluminum mesh, yellow cotton canvas
Sizes available S-M-L-XL-XXL-XXXL
Beekeeping jacket with square veil in aluminum mesh, yellow cotton canvas
Sizes available S-M-L-XL-XXL-XXXL
€36.00Price
€4.80Price
NUTRITIONER for hanging outside the Beehive - Suitable for all types of Beehives
€4.80Price
NUTRITIONER for hanging outside the Beehive - Suitable for all types of Beehives
NUTRITIONER for hanging outside the Beehive - Suitable for all types of Beehives
€4.80Price
USE RECOMMENDATIONS FOR ASPRONOVAR:A) For Beehives- 3 small bottles filled with 200 ml/cad- felt wick 3 cm long- frame placement outside the broods- inverted honeycomb or empty Honey super to act as a lung- treatment times 14/21 days depending on varroa fall- intervention between mid-July and mid-August (need to do post treatment at least 2 brood cycles)B) For nuclei- 3 small bottles filled with 100 ml/cad.- 2 cm long felt wick- positioning frame in contact with polystyrene/wood wall- empty honeycomb to act as a lung- treatment time 14/21 days depending on varroa fall- intervention between mid-July and mid-August (need to do post treatment at least 2 brood cycles) WHY CHOOSE IT: - Gradual spread with possibility to manage evaporation- Low mortality of queen bees- Stability in ant temperature- High efficacy rate- Safe for operator
€12.50Price
USE RECOMMENDATIONS FOR ASPRONOVAR:A) For Beehives- 3 small bottles filled with 200 ml/cad- felt wick 3 cm long- frame placement outside the broods- inverted honeycomb or empty Honey super to act as a lung- treatment times 14/21 days depending on varroa fall- intervention between mid-July and mid-August (need to do post treatment at least 2 brood cycles)B) For nuclei- 3 small bottles filled with 100 ml/cad.- 2 cm long felt wick- positioning frame in contact with polystyrene/wood wall- empty honeycomb to act as a lung- treatment time 14/21 days depending on varroa fall- intervention between mid-July and mid-August (need to do post treatment at least 2 brood cycles) WHY CHOOSE IT: - Gradual spread with possibility to manage evaporation- Low mortality of queen bees- Stability in ant temperature- High efficacy rate- Safe for operator
€12.50Price
€12.50Price
40 "ASPRO NOVAR FORM" FILM DIFFUSER for FORMIC ACID MOUNTED Honey super frame with inserted no. 3 plastic dispensers with closure and no.3 felt webbing (No. PI 796) for dosing evaporation WE RECOMMEND the use of formic acid in 60% liquid solutionREPLACES:- Felt webbing (No. PI 796)- Under cap (No. PI 798)- Seal cap (No. PI 799)- Replacement wooden stand (No. PI795S)
€12.50Price
40 "ASPRO NOVAR FORM" FILM DIFFUSER for FORMIC ACID MOUNTED Honey super frame with inserted no. 3 plastic dispensers with closure and no.3 felt webbing (No. PI 796) for dosing evaporation WE RECOMMEND the use of formic acid in 60% liquid solutionREPLACES:- Felt webbing (No. PI 796)- Under cap (No. PI 798)- Seal cap (No. PI 799)- Replacement wooden stand (No. PI795S)
40 "ASPRO NOVAR FORM" FILM DIFFUSER for FORMIC ACID MOUNTED Honey super frame with inserted no. 3 plastic dispensers with closure and no.3 felt webbing (No. PI 796) for dosing evaporation WE RECOMMEND the use of formic acid in 60% liquid solutionREPLACES:- Felt webbing (No. PI 796)- Under cap (No. PI 798)- Seal cap (No. PI 799)- Replacement wooden stand (No. PI795S)
€12.50Price
€13.50Price
STAINLESS STEEL MILK DRIP SUPPORT-Practical for dripping milk buckets.
€13.50Price
STAINLESS STEEL MILK DRIP SUPPORT-Practical for dripping milk buckets.
STAINLESS STEEL MILK DRIP SUPPORT-Practical for dripping milk buckets.
€13.50Price
€540.00Price
With nylon basket for 9 Honey super frames or 3 DADANT nest frames Conical nylon drive - Full discharge bottom Ø 520 mm - 40 mm plastic cut-off tap No. 3 removable painted legs and hinged transparent lid For nest frames additional panels are needed (Code LA 4790) NOT INCLUDED.
€540.00Price
With nylon basket for 9 Honey super frames or 3 DADANT nest frames Conical nylon drive - Full discharge bottom Ø 520 mm - 40 mm plastic cut-off tap No. 3 removable painted legs and hinged transparent lid For nest frames additional panels are needed (Code LA 4790) NOT INCLUDED.
With nylon basket for 9 Honey super frames or 3 DADANT nest frames Conical nylon drive - Full discharge bottom Ø 520 mm - 40 mm plastic cut-off tap No. 3 removable painted legs and hinged transparent lid For nest frames additional panels are needed (Code LA 4790) NOT INCLUDED.
€540.00Price
The device allows continuous and repeated cycle execution of diffusion by sublimation, of oxalic acid dihydrate inside Beehives. New electronic PID system with thermocouple for automatic management and constant temperature maintenance. Realizes complete sublimation of oxalic acid powder by constant boiler temperature. Easily transportable, allows through connection to a power generator or directly to 220V mains or inverter 12V ->220V allows operation in any environment. Safe, reliable and easy to operate due to process isolation in the boiler that prevents contact with fumes. Built according to CE standards and already patented at international bodies Warranty 1 year.
€395.00Price
The device allows continuous and repeated cycle execution of diffusion by sublimation, of oxalic acid dihydrate inside Beehives. New electronic PID system with thermocouple for automatic management and constant temperature maintenance. Realizes complete sublimation of oxalic acid powder by constant boiler temperature. Easily transportable, allows through connection to a power generator or directly to 220V mains or inverter 12V ->220V allows operation in any environment. Safe, reliable and easy to operate due to process isolation in the boiler that prevents contact with fumes. Built according to CE standards and already patented at international bodies Warranty 1 year.
€395.00Price
€395.00Price
PROFESSIONAL SUBLIMOX SUBLIMATOR FOR OSSALIC ACID - APF PLUS - Alim. 220V-50 Hz KIT includes :n.1 Sublimation deviceen.1 Transport caseon.2 Process capson.1 Dosing measuring cup 2 g- Instruction manual OPTIONS to be ordered separately:- Tilting cap kit (Cod. MS BAS)- VOLTAGE INVERTER 12V=-> 220V 50Hz (FO 23671)- Replacement process cap (Cod. FO 2367T)- Replacement process cap oring (Cod. FO 2367O)- Replacement heating element (Cod. MS RES)- Replacement measuring cup (Cod. MS MIS)
€395.00Price
PROFESSIONAL SUBLIMOX SUBLIMATOR FOR OSSALIC ACID - APF PLUS - Alim. 220V-50 Hz KIT includes :n.1 Sublimation deviceen.1 Transport caseon.2 Process capson.1 Dosing measuring cup 2 g- Instruction manual OPTIONS to be ordered separately:- Tilting cap kit (Cod. MS BAS)- VOLTAGE INVERTER 12V=-> 220V 50Hz (FO 23671)- Replacement process cap (Cod. FO 2367T)- Replacement process cap oring (Cod. FO 2367O)- Replacement heating element (Cod. MS RES)- Replacement measuring cup (Cod. MS MIS)
PROFESSIONAL SUBLIMOX SUBLIMATOR FOR OSSALIC ACID - APF PLUS - Alim. 220V-50 Hz KIT includes :n.1 Sublimation deviceen.1 Transport caseon.2 Process capson.1 Dosing measuring cup 2 g- Instruction manual OPTIONS to be ordered separately:- Tilting cap kit (Cod. MS BAS)- VOLTAGE INVERTER 12V=-> 220V 50Hz (FO 23671)- Replacement process cap (Cod. FO 2367T)- Replacement process cap oring (Cod. FO 2367O)- Replacement heating element (Cod. MS RES)- Replacement measuring cup (Cod. MS MIS)
€395.00Price
Composed of: bottom, nest, cover with feeder and plastic coverDimensions: 50 x 43 x h 42 cm Base dimensions: 43 x 54 cm
€102.00Price
Composed of: bottom, nest, cover with feeder and plastic coverDimensions: 50 x 43 x h 42 cm Base dimensions: 43 x 54 cm
€102.00Price
€102.00Price
Beehive Dadant Blatt NICOT plastic 10-frame cube, nest only without frames
€102.00Price
Beehive Dadant Blatt NICOT plastic 10-frame cube, nest only without frames
Beehive Dadant Blatt NICOT plastic 10-frame cube, nest only without frames
€102.00Price
€24.00Price
Looting stop trap to be applied on the sill of the Beehive
Looting stop trap to be applied on the sill of the Beehive
€24.00Price
Assembled and painted 8-frame honeycomb nest, including: honeycomb cover with mounted 4-position disc; 10cm high galvanized sheet metal lid; metal door; 3 connection angles; 8-frame spacers mounted in the nest; fixed anti-moth net bottom with galvanized sheet metal bottom tray removable from the back; 25mm thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest
€84.00Price
Assembled and painted 8-frame honeycomb nest, including: honeycomb cover with mounted 4-position disc; 10cm high galvanized sheet metal lid; metal door; 3 connection angles; 8-frame spacers mounted in the nest; fixed anti-moth net bottom with galvanized sheet metal bottom tray removable from the back; 25mm thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest
€84.00Price
€84.00Price
Beehive Dadant Blatt 8-frame cube with fixed anti-varroa mesh bottom. Nest only (Frames not included) (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€84.00Price
Beehive Dadant Blatt 8-frame cube with fixed anti-varroa mesh bottom. Nest only (Frames not included) (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehive Dadant Blatt 8-frame cube with fixed anti-varroa mesh bottom. Nest only (Frames not included) (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€84.00Price
€0.20Price
CAPSULE XDEEP H18 T70 for ERGO TO70ALTO jar - diam. 70 mm - H = 18 mm
COLORS : GOLD - SILVER - BROWN - COPPER - BLACK - WHITE
€0.20Price
CAPSULE XDEEP H18 T70 for ERGO TO70ALTO jar - diam. 70 mm - H = 18 mm
COLORS : GOLD - SILVER - BROWN - COPPER - BLACK - WHITE
CAPSULE XDEEP H18 T70 for ERGO TO70ALTO jar - diam. 70 mm - H = 18 mm
COLORS : GOLD - SILVER - BROWN - COPPER - BLACK - WHITE
€0.20Price
Directions for use: shake the product well. Use pure for stubborn dirt. For routine maintenance, dilute one cup (about 200 ml( in half a bucket of water (about 2.5 liters). Do not rinse.
€8.00Price
Directions for use: shake the product well. Use pure for stubborn dirt. For routine maintenance, dilute one cup (about 200 ml( in half a bucket of water (about 2.5 liters). Do not rinse.
€8.00Price
€8.00Price
Composition: osmotized water, whole plant soap, vegetable glycerin, micronized beeswax and carnauba wax, propolis, citrus oil. Features: natural product that can keep wood surfaces (furniture, parquet/oliate/waxed) clean and waxed. 100% biodegradable quickly. Free of synthetic and petroleum substances.
€8.00Price
Composition: osmotized water, whole plant soap, vegetable glycerin, micronized beeswax and carnauba wax, propolis, citrus oil. Features: natural product that can keep wood surfaces (furniture, parquet/oliate/waxed) clean and waxed. 100% biodegradable quickly. Free of synthetic and petroleum substances.
Composition: osmotized water, whole plant soap, vegetable glycerin, micronized beeswax and carnauba wax, propolis, citrus oil. Features: natural product that can keep wood surfaces (furniture, parquet/oliate/waxed) clean and waxed. 100% biodegradable quickly. Free of synthetic and petroleum substances.
€8.00Price
€595.00Price
It comes in an elegant case. It can be powered by a 12 V= battery or by a 12 V= stabilized power supply
Consisting of:
Shockproof case
Electronic control unit 12 V=, complete with pulse and frequency regulator
Plate with glass for collecting poison
Each PICK–O-TRONIC is designed to be connected to up to a maximum of 5 poison collection plates.
This device is applied in front of the hive.
The plate rests on the hive’s flight board.
The bees that pass over the electric plate are annoyed by the electric discharges, and sting the glass plate, on which the poison is deposited and dries.
Spare part: Poison collection plate (Cod. HY P002)
€595.00Price
It comes in an elegant case. It can be powered by a 12 V= battery or by a 12 V= stabilized power supply
Consisting of:
Shockproof case
Electronic control unit 12 V=, complete with pulse and frequency regulator
Plate with glass for collecting poison
Each PICK–O-TRONIC is designed to be connected to up to a maximum of 5 poison collection plates.
This device is applied in front of the hive.
The plate rests on the hive’s flight board.
The bees that pass over the electric plate are annoyed by the electric discharges, and sting the glass plate, on which the poison is deposited and dries.
Spare part: Poison collection plate (Cod. HY P002)
It comes in an elegant case. It can be powered by a 12 V= battery or by a 12 V= stabilized power supply
Consisting of:
Shockproof case
Electronic control unit 12 V=, complete with pulse and frequency regulator
Plate with glass for collecting poison
Each PICK–O-TRONIC is designed to be connected to up to a maximum of 5 poison collection plates.
This device is applied in front of the hive.
The plate rests on the hive’s flight board.
The bees that pass over the electric plate are annoyed by the electric discharges, and sting the glass plate, on which the poison is deposited and dries.
Spare part: Poison collection plate (Cod. HY P002)
€595.00Price
€60.00Price
Complete handle for "ferret" type anti-varroa vaporizer (Code GI FRG-FUR)
€60.00Price
Complete handle for "ferret" type anti-varroa vaporizer (Code GI FRG-FUR)
Complete handle for "ferret" type anti-varroa vaporizer (Code GI FRG-FUR)
€60.00Price
€0.23Price
FLACON : 15 ml - Ø 28.5 mm - h 61.30 mm - Mouth PFP 18 Bottle only Packed in thermopack of 170 pcs.
€0.23Price
FLACON : 15 ml - Ø 28.5 mm - h 61.30 mm - Mouth PFP 18 Bottle only Packed in thermopack of 170 pcs.
FLACON : 15 ml - Ø 28.5 mm - h 61.30 mm - Mouth PFP 18 Bottle only Packed in thermopack of 170 pcs.
€0.23Price