To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.

The 3M 6200 reusable semi-mask respirator is easy to use, lightweight and requires minimal maintenance. The respirator is sold with a pair of Class A1 filters suitable for respiratory protection from organic vapors with boiling points above 65°C (e.g., oxalic acid). The nape cap is designed to ensure a snug fit and to facilitate lacing behind the neck. The soft elastomeric facepiece and light weight (82 g) provide excellent comfort even for prolonged periods of work. The compact design minimizes obstruction of the field of view and makes it easy to handle. The two-side filter attachment system offers minimal breathing resistance. Filters (class A1) for organic gases and vapors model 3M 6051 are suitable for paints, solvents, organic fumes (e.g., oxalic acid) and nuisance odors. Suitable for 3M 6000 Series and 7000 Series 3M semi-masks and full-face masks The dual-filter design offers good balance and a panoramic view The filters can be used with all 3M semi-mask and full-face respirators equipped with a bayonet coupling system The bayonet coupling allows the filters to be easily snapped on