€4,350.00Regular price-€450.00€4,800.00Price
Special Products
Featured Products
Uncupping and opercolo treatment
Equipment for uncapping, benches, waxing machines, presses, centrifuges for caps, kettles and wax melters.
€1,100.00Price
€1,100.00Price
Wax melter, stainless steel double-wall, with thermostatic electric heating, 25 liter capacity, with heat protection.
With manual temperature control 30/120 °C.
Particularly suitable for those who have to produce candles and wax forms with silicone moulds.
THE FUSER CAN BE USED AS A STERILIZER OF THE WAX WITH THE ADDITION OF DIATHERMIC OIL
€1,100.00Price
Wax melter, stainless steel double-wall, with thermostatic electric heating, 25 liter capacity, with heat protection.
With manual temperature control 30/120 °C.
Particularly suitable for those who have to produce candles and wax forms with silicone moulds.
THE FUSER CAN BE USED AS A STERILIZER OF THE WAX WITH THE ADDITION OF DIATHERMIC OIL
Wax melter, stainless steel double-wall, with thermostatic electric heating, 25 liter capacity, with heat protection.
With manual temperature control 30/120 °C.
Particularly suitable for those who have to produce candles and wax forms with silicone moulds.
THE FUSER CAN BE USED AS A STERILIZER OF THE WAX WITH THE ADDITION OF DIATHERMIC OIL
€1,100.00Price
€235.00Price
PRESS FOR WAX OPERCLES AND FRUIT - SCREW Ø 20 cm - STAINLESS STEEL CAGE - painted steel support Suitable for manual squeezing of the opercles of Wax, Fruit, Pomace, Myrtle, etc. Tilting frame for easier use Cage size: 20 x 35 cm Cage Capacity : 9 L Weight: 10 kg MADE IN ITALY
€235.00Price
PRESS FOR WAX OPERCLES AND FRUIT - SCREW Ø 20 cm - STAINLESS STEEL CAGE - painted steel support Suitable for manual squeezing of the opercles of Wax, Fruit, Pomace, Myrtle, etc. Tilting frame for easier use Cage size: 20 x 35 cm Cage Capacity : 9 L Weight: 10 kg MADE IN ITALY
PRESS FOR WAX OPERCLES AND FRUIT - SCREW Ø 20 cm - STAINLESS STEEL CAGE - painted steel support Suitable for manual squeezing of the opercles of Wax, Fruit, Pomace, Myrtle, etc. Tilting frame for easier use Cage size: 20 x 35 cm Cage Capacity : 9 L Weight: 10 kg MADE IN ITALY
€235.00Price
€395.00Price
Load capacity 10 frames D.B. from nest Wax containment and filtering basket with base in perforated stainless steel plate Basket diameter 41.5 cm Castle support in stainless steel Flat bottom 1 mm stainless steel sheet STOVE NOT INCLUDED ART. IQ F21
€395.00Price
Load capacity 10 frames D.B. from nest Wax containment and filtering basket with base in perforated stainless steel plate Basket diameter 41.5 cm Castle support in stainless steel Flat bottom 1 mm stainless steel sheet STOVE NOT INCLUDED ART. IQ F21
Load capacity 10 frames D.B. from nest Wax containment and filtering basket with base in perforated stainless steel plate Basket diameter 41.5 cm Castle support in stainless steel Flat bottom 1 mm stainless steel sheet STOVE NOT INCLUDED ART. IQ F21
€395.00Price
€7.50Price
Stainless steel uncapping fork with plastic handle (straight tips)
€7.50Price
Stainless steel uncapping fork with plastic handle (straight tips)
Stainless steel uncapping fork with plastic handle (straight tips)
€7.50Price
€1,290.00Price
Table uncapping machine with horizontal vibrating blade. In stainless steel, very silent, with a 300 mm long serrated edge blade. Electrically heated, controlled by a thermostat and oscillating horizontally by a small 220 V gearmotor. Capacity of 150 honeycombs/hour. It works perfectly leaning on our uncapping benches or uncapping trolley.
€1,290.00Price
Table uncapping machine with horizontal vibrating blade. In stainless steel, very silent, with a 300 mm long serrated edge blade. Electrically heated, controlled by a thermostat and oscillating horizontally by a small 220 V gearmotor. Capacity of 150 honeycombs/hour. It works perfectly leaning on our uncapping benches or uncapping trolley.
Table uncapping machine with horizontal vibrating blade. In stainless steel, very silent, with a 300 mm long serrated edge blade. Electrically heated, controlled by a thermostat and oscillating horizontally by a small 220 V gearmotor. Capacity of 150 honeycombs/hour. It works perfectly leaning on our uncapping benches or uncapping trolley.
€1,290.00Price
€145.00Price
€145.00Price
DESK in order to uncap with tank of cm. 60x40x22
inox-steel Filter for drip the operculum inox-steel lectern for support honeycombs art.L11 cm. 60X40X235 faucet art.R11€145.00Price
DESK in order to uncap with tank of cm. 60x40x22
inox-steel Filter for drip the operculum inox-steel lectern for support honeycombs art.L11 cm. 60X40X235 faucet art.R11DESK in order to uncap with tank of cm. 60x40x22
inox-steel Filter for drip the operculum inox-steel lectern for support honeycombs art.L11 cm. 60X40X235 faucet art.R11€145.00Price
€1,700.00Price
€1,700.00Price
Wax melter, stainless steel double-wall, with thermostatic electric heating, 70 liter capacity, with heat protection.
With manual temperature control 30/120 °C.
Particularly suitable for those who have to produce candles and wax forms with silicone moulds.
THE FUSER CAN BE USED AS A STERILIZER OF THE WAX WITH THE ADDITION OF DIATHERMIC OIL
€1,700.00Price
Wax melter, stainless steel double-wall, with thermostatic electric heating, 70 liter capacity, with heat protection.
With manual temperature control 30/120 °C.
Particularly suitable for those who have to produce candles and wax forms with silicone moulds.
THE FUSER CAN BE USED AS A STERILIZER OF THE WAX WITH THE ADDITION OF DIATHERMIC OIL
Wax melter, stainless steel double-wall, with thermostatic electric heating, 70 liter capacity, with heat protection.
With manual temperature control 30/120 °C.
Particularly suitable for those who have to produce candles and wax forms with silicone moulds.
THE FUSER CAN BE USED AS A STERILIZER OF THE WAX WITH THE ADDITION OF DIATHERMIC OIL
€1,700.00Price
€530.00Price
"Vapor CYLINDRICAL" Steam Waxer in stainless steel sheet, vat diameter ø 470 mm, with internal basket diameter ø 378 mm. It can hold 8 frames. Stove not included
€530.00Price
"Vapor CYLINDRICAL" Steam Waxer in stainless steel sheet, vat diameter ø 470 mm, with internal basket diameter ø 378 mm. It can hold 8 frames. Stove not included
"Vapor CYLINDRICAL" Steam Waxer in stainless steel sheet, vat diameter ø 470 mm, with internal basket diameter ø 378 mm. It can hold 8 frames. Stove not included
€530.00Price
€108.00Price
€108.00Price
Economic UNCAPPING BENCH height 20 cm with plastic dripper With stainless steel bed Dimensions 40 x 60 x 20cm
€108.00Price
Economic UNCAPPING BENCH height 20 cm with plastic dripper With stainless steel bed Dimensions 40 x 60 x 20cm
Economic UNCAPPING BENCH height 20 cm with plastic dripper With stainless steel bed Dimensions 40 x 60 x 20cm
€108.00Price
€340.00Price
PRESS FOR WAX OPERCOLS AND FRUIT OPERCOLI - SCREW Ø 20 cm - STAINLESS STEEL CAGE and SUPPORT
Suitable for manual squeezing of the capsules of Wax, Fruit, Pomace, Myrtle, etc.
Tilting frame for ease of use
Cage size: 20 x 35 cm
Cage Capacity : 9 L
Weight : 10kg
MADE IN ITALY
€340.00Price
PRESS FOR WAX OPERCOLS AND FRUIT OPERCOLI - SCREW Ø 20 cm - STAINLESS STEEL CAGE and SUPPORT
Suitable for manual squeezing of the capsules of Wax, Fruit, Pomace, Myrtle, etc.
Tilting frame for ease of use
Cage size: 20 x 35 cm
Cage Capacity : 9 L
Weight : 10kg
MADE IN ITALY
PRESS FOR WAX OPERCOLS AND FRUIT OPERCOLI - SCREW Ø 20 cm - STAINLESS STEEL CAGE and SUPPORT
Suitable for manual squeezing of the capsules of Wax, Fruit, Pomace, Myrtle, etc.
Tilting frame for ease of use
Cage size: 20 x 35 cm
Cage Capacity : 9 L
Weight : 10kg
MADE IN ITALY
€340.00Price
€1,180.00Price
€1,180.00Price
UNCAPPING MANUAL MACHINE - the honeycomb passes through 2 rollers which cut the operculum for Dadant Blatt nest and super frames and Langstroth frames
€1,180.00Price
UNCAPPING MANUAL MACHINE - the honeycomb passes through 2 rollers which cut the operculum for Dadant Blatt nest and super frames and Langstroth frames
UNCAPPING MANUAL MACHINE - the honeycomb passes through 2 rollers which cut the operculum for Dadant Blatt nest and super frames and Langstroth frames
€1,180.00Price
€7.50Price
Stainless steel uncapping fork with plastic handle (bent tips)
€7.50Price
Stainless steel uncapping fork with plastic handle (bent tips)
Stainless steel uncapping fork with plastic handle (bent tips)
€7.50Price
€990.00Price
€990.00Price
25L electric beeswax sterilizer
- Machine built entirely in AISI 304 stainless steel, dust cover included.
- Double wall heated by electric resistance immersed in diathermic oil (6.5 lt excluded)(Code GN CCTLIFU0002)
- Equipped with 1 3⁄4" tap for total drainage and 1 1⁄2" ball tap for loading the heating liquid, “Overflow” vent.
- Mechanical thermostat adjustable up to a maximum temperature of 150° C, ON/OFF lever, power indicator light.
- Power supply: 220 V/50Hz 2000W
- Overall dimensions: 480x410x550 H mm - Internal dimensions: Ø 300 mm, height 420 mm
€990.00Price
25L electric beeswax sterilizer
- Machine built entirely in AISI 304 stainless steel, dust cover included.
- Double wall heated by electric resistance immersed in diathermic oil (6.5 lt excluded)(Code GN CCTLIFU0002)
- Equipped with 1 3⁄4" tap for total drainage and 1 1⁄2" ball tap for loading the heating liquid, “Overflow” vent.
- Mechanical thermostat adjustable up to a maximum temperature of 150° C, ON/OFF lever, power indicator light.
- Power supply: 220 V/50Hz 2000W
- Overall dimensions: 480x410x550 H mm - Internal dimensions: Ø 300 mm, height 420 mm
25L electric beeswax sterilizer
- Machine built entirely in AISI 304 stainless steel, dust cover included.
- Double wall heated by electric resistance immersed in diathermic oil (6.5 lt excluded)(Code GN CCTLIFU0002)
- Equipped with 1 3⁄4" tap for total drainage and 1 1⁄2" ball tap for loading the heating liquid, “Overflow” vent.
- Mechanical thermostat adjustable up to a maximum temperature of 150° C, ON/OFF lever, power indicator light.
- Power supply: 220 V/50Hz 2000W
- Overall dimensions: 480x410x550 H mm - Internal dimensions: Ø 300 mm, height 420 mm
€990.00Price
€440.00Price
PRESS FOR WAX OPERCOLS AND FRUIT OPERCOLI - SCREW Ø 20 cm - STAINLESS STEEL CAGE and SUPPORT
Suitable for manual squeezing of Wax, Fruit, Pomace, Myrtle, etc.
Tilting frame for ease of use
Cage size: 25 x 40 cm
Cage Capacity : 20 L
Weight : 18 kg
MADE IN ITALY
€440.00Price
PRESS FOR WAX OPERCOLS AND FRUIT OPERCOLI - SCREW Ø 20 cm - STAINLESS STEEL CAGE and SUPPORT
Suitable for manual squeezing of Wax, Fruit, Pomace, Myrtle, etc.
Tilting frame for ease of use
Cage size: 25 x 40 cm
Cage Capacity : 20 L
Weight : 18 kg
MADE IN ITALY
PRESS FOR WAX OPERCOLS AND FRUIT OPERCOLI - SCREW Ø 20 cm - STAINLESS STEEL CAGE and SUPPORT
Suitable for manual squeezing of Wax, Fruit, Pomace, Myrtle, etc.
Tilting frame for ease of use
Cage size: 25 x 40 cm
Cage Capacity : 20 L
Weight : 18 kg
MADE IN ITALY
€440.00Price
€115.00Price
Economical UNCAPPING DESK with 40 mm CUT TAP height 20cm with plastic drip With stainless steel lectern Dimensions 40 x 60 x 20cm
€115.00Price
Economical UNCAPPING DESK with 40 mm CUT TAP height 20cm with plastic drip With stainless steel lectern Dimensions 40 x 60 x 20cm
Economical UNCAPPING DESK with 40 mm CUT TAP height 20cm with plastic drip With stainless steel lectern Dimensions 40 x 60 x 20cm
€115.00Price
- Sale
€580.00Price
Load capacity 16 frames D.B. from nest Wax containment and filtering basket with base in perforated stainless steel plate Stainless steel basket support - Internal dimensions 53 x 35 49 cm Flat wax bottom - Plastic grip handles 1 mm stainless steel sheet STOVE NOT INCLUDED (ART. QI F21)
- Sale
€580.00Price
Load capacity 16 frames D.B. from nest Wax containment and filtering basket with base in perforated stainless steel plate Stainless steel basket support - Internal dimensions 53 x 35 49 cm Flat wax bottom - Plastic grip handles 1 mm stainless steel sheet STOVE NOT INCLUDED (ART. QI F21)
- Sale
Load capacity 16 frames D.B. from nest Wax containment and filtering basket with base in perforated stainless steel plate Stainless steel basket support - Internal dimensions 53 x 35 49 cm Flat wax bottom - Plastic grip handles 1 mm stainless steel sheet STOVE NOT INCLUDED (ART. QI F21)
€580.00Price
€1,438.00Price
€1,438.00Price
Manual ROLL UNCAPPING MACHINE for DADANT BLATT honeycombs.
This simple but ingenious "ROLL" MANUAL UNCAPPING machine is revolutionary because it makes mechanical uncapping possible even for all medium/small beekeepers.
Also available in versions: LANGSTROTH, TURKISH, SIMPLEX, HUNOR, ZANDER, ZANDER SMALL and DNM
€1,438.00Price
Manual ROLL UNCAPPING MACHINE for DADANT BLATT honeycombs.
This simple but ingenious "ROLL" MANUAL UNCAPPING machine is revolutionary because it makes mechanical uncapping possible even for all medium/small beekeepers.
Also available in versions: LANGSTROTH, TURKISH, SIMPLEX, HUNOR, ZANDER, ZANDER SMALL and DNM
Manual ROLL UNCAPPING MACHINE for DADANT BLATT honeycombs.
This simple but ingenious "ROLL" MANUAL UNCAPPING machine is revolutionary because it makes mechanical uncapping possible even for all medium/small beekeepers.
Also available in versions: LANGSTROTH, TURKISH, SIMPLEX, HUNOR, ZANDER, ZANDER SMALL and DNM
€1,438.00Price
€1,210.00Price
€128.00Price
Plastic UNCAPPING BENCH 30 cm high complete with tap with stainless steel drip With stainless steel lectern Dimensions 40 x 60 x 30cm
€128.00Price
Plastic UNCAPPING BENCH 30 cm high complete with tap with stainless steel drip With stainless steel lectern Dimensions 40 x 60 x 30cm
Plastic UNCAPPING BENCH 30 cm high complete with tap with stainless steel drip With stainless steel lectern Dimensions 40 x 60 x 30cm
€128.00Price
€850.00Price
ELECTRIC STEAM WAXER IN STAINLESS STEEL for 16 NEST FRAMES
Power supply 220V -50Hz - 2000W
basket dimensions: 48 x 31 x h 50.5 cm
INSIDE A REMOVABLE PERFORATED STAINLESS STEEL BASKET WHERE TO INSERT THE HONEYCOMBS OR THE WAX, BELOW THERE IS A STAINLESS STEEL TRAY WITH INCLINED DRAIN WHICH COLLECTS THE MELTED WAX AND DISCHARGES IT OUTSIDE INTO A COLLECTION TRAY PROVIDED.
SEE INSTRUCTIONS IN THE "ATTACHED DOCUMENTS" SECTION
€850.00Price
ELECTRIC STEAM WAXER IN STAINLESS STEEL for 16 NEST FRAMES
Power supply 220V -50Hz - 2000W
basket dimensions: 48 x 31 x h 50.5 cm
INSIDE A REMOVABLE PERFORATED STAINLESS STEEL BASKET WHERE TO INSERT THE HONEYCOMBS OR THE WAX, BELOW THERE IS A STAINLESS STEEL TRAY WITH INCLINED DRAIN WHICH COLLECTS THE MELTED WAX AND DISCHARGES IT OUTSIDE INTO A COLLECTION TRAY PROVIDED.
SEE INSTRUCTIONS IN THE "ATTACHED DOCUMENTS" SECTION
ELECTRIC STEAM WAXER IN STAINLESS STEEL for 16 NEST FRAMES
Power supply 220V -50Hz - 2000W
basket dimensions: 48 x 31 x h 50.5 cm
INSIDE A REMOVABLE PERFORATED STAINLESS STEEL BASKET WHERE TO INSERT THE HONEYCOMBS OR THE WAX, BELOW THERE IS A STAINLESS STEEL TRAY WITH INCLINED DRAIN WHICH COLLECTS THE MELTED WAX AND DISCHARGES IT OUTSIDE INTO A COLLECTION TRAY PROVIDED.
SEE INSTRUCTIONS IN THE "ATTACHED DOCUMENTS" SECTION
€850.00Price
€8.00Price
Stain cmless steel uncapping fork with plastic handle (bent tips) Lenght: 8 cm
€8.00Price
Stain cmless steel uncapping fork with plastic handle (bent tips) Lenght: 8 cm
Stain cmless steel uncapping fork with plastic handle (bent tips) Lenght: 8 cm
€8.00Price
€2,790.00Price
Semi - Automatic Uncapper, Incl.Table For Empty Frames 1m Long, Hot Water Heating System
€2,790.00Price
Semi - Automatic Uncapper, Incl.Table For Empty Frames 1m Long, Hot Water Heating System
Semi - Automatic Uncapper, Incl.Table For Empty Frames 1m Long, Hot Water Heating System
€2,790.00Price
€175.00Price
PRESS FOR wax or POMACE - Ø 15 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 15 x 25 cm - capacity 4 L
Screw diameter 20 mm
Weight 8 Kg
MADE IN ITALY
€175.00Price
PRESS FOR wax or POMACE - Ø 15 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 15 x 25 cm - capacity 4 L
Screw diameter 20 mm
Weight 8 Kg
MADE IN ITALY
PRESS FOR wax or POMACE - Ø 15 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 15 x 25 cm - capacity 4 L
Screw diameter 20 mm
Weight 8 Kg
MADE IN ITALY
€175.00Price
€68.00Price
Table-top uncapping desk, with 600x400x130 mm plastic tank, drainer and frame holder lectern in stainless steel.
€68.00Price
Table-top uncapping desk, with 600x400x130 mm plastic tank, drainer and frame holder lectern in stainless steel.
Table-top uncapping desk, with 600x400x130 mm plastic tank, drainer and frame holder lectern in stainless steel.
€68.00Price
€8.00Price
Uncapping fork
Uncapping is faster and more precise.
It is used by pulling it, with the double blade, to refine the edges
reentrant parts of the operculum
- In food grade plastic
- Stainless Steel blade
- ergonomic handle
€8.00Price
Uncapping fork
Uncapping is faster and more precise.
It is used by pulling it, with the double blade, to refine the edges
reentrant parts of the operculum
- In food grade plastic
- Stainless Steel blade
- ergonomic handle
Uncapping fork
Uncapping is faster and more precise.
It is used by pulling it, with the double blade, to refine the edges
reentrant parts of the operculum
- In food grade plastic
- Stainless Steel blade
- ergonomic handle
€8.00Price
€225.00Price
PRESS FOR wax or POMACE - Ø 20 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 20 x 35 cm - capacity 11 L
Screw diameter 28 mm
Weight 18 Kg
MADE IN ITALY
€225.00Price
PRESS FOR wax or POMACE - Ø 20 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 20 x 35 cm - capacity 11 L
Screw diameter 28 mm
Weight 18 Kg
MADE IN ITALY
PRESS FOR wax or POMACE - Ø 20 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 20 x 35 cm - capacity 11 L
Screw diameter 28 mm
Weight 18 Kg
MADE IN ITALY
€225.00Price
€2,170.00Price
€2,170.00Price
50 L double-chamber stainless steel TANK (not insulated).
Power supply: 230V-1500W
Drain with 40 mm brass tap
Thermostat 0-120°
Internal diameter 380 mm
External diameter 440 mm
Height 680mm
€2,170.00Price
50 L double-chamber stainless steel TANK (not insulated).
Power supply: 230V-1500W
Drain with 40 mm brass tap
Thermostat 0-120°
Internal diameter 380 mm
External diameter 440 mm
Height 680mm
50 L double-chamber stainless steel TANK (not insulated).
Power supply: 230V-1500W
Drain with 40 mm brass tap
Thermostat 0-120°
Internal diameter 380 mm
External diameter 440 mm
Height 680mm
€2,170.00Price
€1,150.00Price
Stainless steel steam WAXER for 32 Dadant B. honeycombs or 40 Langstroth honeycombs
2 Stainless steel baskets
dimensions: 93 x 65 x h 80 cm
Stove not included (Cod. QI F21)
€1,150.00Price
Stainless steel steam WAXER for 32 Dadant B. honeycombs or 40 Langstroth honeycombs
2 Stainless steel baskets
dimensions: 93 x 65 x h 80 cm
Stove not included (Cod. QI F21)
Stainless steel steam WAXER for 32 Dadant B. honeycombs or 40 Langstroth honeycombs
2 Stainless steel baskets
dimensions: 93 x 65 x h 80 cm
Stove not included (Cod. QI F21)
€1,150.00Price
€5,200.00Price
UNCAPPING MACHINE with alternating knives for super honeycombs - automatic honeycomb uncapping cycle - (one motor for two knives)
€5,200.00Price
UNCAPPING MACHINE with alternating knives for super honeycombs - automatic honeycomb uncapping cycle - (one motor for two knives)
UNCAPPING MACHINE with alternating knives for super honeycombs - automatic honeycomb uncapping cycle - (one motor for two knives)
€5,200.00Price
€108.00Price
Table-top uncapping desk, with 600x400x180 mm plastic tank, drainer and frame holder lectern in stainless steel.
OPTINON: Without honey tap
With honey tap
€108.00Price
Table-top uncapping desk, with 600x400x180 mm plastic tank, drainer and frame holder lectern in stainless steel.
OPTINON: Without honey tap
With honey tap
Table-top uncapping desk, with 600x400x180 mm plastic tank, drainer and frame holder lectern in stainless steel.
OPTINON: Without honey tap
With honey tap
€108.00Price
€230.00Price
€230.00Price
Solar WAXING MACHINE in wood with glass aluminum wax collection tray (the use of baking paper is recommended to line the inside of the wax collection tray) Dimensions: 68 x 52.5cm
€230.00Price
Solar WAXING MACHINE in wood with glass aluminum wax collection tray (the use of baking paper is recommended to line the inside of the wax collection tray) Dimensions: 68 x 52.5cm
Solar WAXING MACHINE in wood with glass aluminum wax collection tray (the use of baking paper is recommended to line the inside of the wax collection tray) Dimensions: 68 x 52.5cm
€230.00Price
€21.00Price
FORK for uncapping in stainless steel
Uncapping is faster and more precise.
It is used by pulling it, the cutting depth is adjustable.
- length 20 cm
- width 8.5 cm
- plastic handle
€21.00Price
FORK for uncapping in stainless steel
Uncapping is faster and more precise.
It is used by pulling it, the cutting depth is adjustable.
- length 20 cm
- width 8.5 cm
- plastic handle
FORK for uncapping in stainless steel
Uncapping is faster and more precise.
It is used by pulling it, the cutting depth is adjustable.
- length 20 cm
- width 8.5 cm
- plastic handle
€21.00Price
€255.00Price
PRESS FOR wax or POMACE - Ø 25 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions : Cage 25 x 40 cm - capacity 20 L Screw diameter 28 mm Weight 22 Kg MADE IN ITALY
€255.00Price
PRESS FOR wax or POMACE - Ø 25 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions : Cage 25 x 40 cm - capacity 20 L Screw diameter 28 mm Weight 22 Kg MADE IN ITALY
PRESS FOR wax or POMACE - Ø 25 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions : Cage 25 x 40 cm - capacity 20 L Screw diameter 28 mm Weight 22 Kg MADE IN ITALY
€255.00Price
€2,750.00Price
KETTLE for WAX or WAX/HONEY SEPARATOR in stainless steel with double insulated chamber
FROM 150 Kg - Power supply 230V-1500W
stainless steel
double room insulated
complete with electrical panel with regulation thermostat
€2,750.00Price
KETTLE for WAX or WAX/HONEY SEPARATOR in stainless steel with double insulated chamber
FROM 150 Kg - Power supply 230V-1500W
stainless steel
double room insulated
complete with electrical panel with regulation thermostat
KETTLE for WAX or WAX/HONEY SEPARATOR in stainless steel with double insulated chamber
FROM 150 Kg - Power supply 230V-1500W
stainless steel
double room insulated
complete with electrical panel with regulation thermostat
€2,750.00Price
The knives are heated by a hot water heating and recycling unit (included in the machine) and the temperature of the knives can be regulated by a thermostat. The knives also work inside the wooden frame of the combs and can therefore uncaulk even unfilled frames. Knife adjustment is quick and easy by means of a lever located on the side of the uncapping machine that allows tightening or widening the passage between the knives. The combs introduced manually are automatically guided and inserted between the blades to obtain regular and systematic uncapping on both sides.
After the uncapping process, the frames are stored by sliding on the support. The support is made of stainless steel and under it you can place an uncupping table (see the picture). The length of the support varying depends on the length of the uncupping table. Uncapping capacity: approx. 11 frames/minute. Knife temperature: via thermostat from 30° C to 90° C. Power supply: 220 V Absorption: 2.8 KW 13,5 A **MACHINE MANUFACTURED FOR DADANT BLATT FRAMES. ON REQUEST, AFTER RECEIPT OF FRAMES DIMENSIONS, IT CAN ALSO BE MANUFACTURED FOR OTHER FRAME SIZES**
€6,180.00Price
The knives are heated by a hot water heating and recycling unit (included in the machine) and the temperature of the knives can be regulated by a thermostat. The knives also work inside the wooden frame of the combs and can therefore uncaulk even unfilled frames. Knife adjustment is quick and easy by means of a lever located on the side of the uncapping machine that allows tightening or widening the passage between the knives. The combs introduced manually are automatically guided and inserted between the blades to obtain regular and systematic uncapping on both sides.
After the uncapping process, the frames are stored by sliding on the support. The support is made of stainless steel and under it you can place an uncupping table (see the picture). The length of the support varying depends on the length of the uncupping table. Uncapping capacity: approx. 11 frames/minute. Knife temperature: via thermostat from 30° C to 90° C. Power supply: 220 V Absorption: 2.8 KW 13,5 A **MACHINE MANUFACTURED FOR DADANT BLATT FRAMES. ON REQUEST, AFTER RECEIPT OF FRAMES DIMENSIONS, IT CAN ALSO BE MANUFACTURED FOR OTHER FRAME SIZES**
€6,180.00Price
€6,180.00Price
The "Giordan" uncapping machine with heated vibrating knives is a professional machine that replaces the manual uncapping process. The machine is made entirely of AISI 304 stainless steel and works by guiding the frames through two water-heated vibrating knives to obtain a precise and optimal cut of the operculum. With the uncapping machine the opercula are not crumbled but cut, as with the use of a manual knife. With the addition of the double blade kit there is no need to re-uncup the frames after the uncapping process.
€6,180.00Price
The "Giordan" uncapping machine with heated vibrating knives is a professional machine that replaces the manual uncapping process. The machine is made entirely of AISI 304 stainless steel and works by guiding the frames through two water-heated vibrating knives to obtain a precise and optimal cut of the operculum. With the uncapping machine the opercula are not crumbled but cut, as with the use of a manual knife. With the addition of the double blade kit there is no need to re-uncup the frames after the uncapping process.
The "Giordan" uncapping machine with heated vibrating knives is a professional machine that replaces the manual uncapping process. The machine is made entirely of AISI 304 stainless steel and works by guiding the frames through two water-heated vibrating knives to obtain a precise and optimal cut of the operculum. With the uncapping machine the opercula are not crumbled but cut, as with the use of a manual knife. With the addition of the double blade kit there is no need to re-uncup the frames after the uncapping process.
€6,180.00Price
€18.00Price
€18.00Price
Roller for uncapping nest frames, for breaking cells in the apiary and stimulating bee families
PROFESSIONAL roller with FLEXIBLE PLASTIC TEETH
Roller length 14 cm
€18.00Price
Roller for uncapping nest frames, for breaking cells in the apiary and stimulating bee families
PROFESSIONAL roller with FLEXIBLE PLASTIC TEETH
Roller length 14 cm
Roller for uncapping nest frames, for breaking cells in the apiary and stimulating bee families
PROFESSIONAL roller with FLEXIBLE PLASTIC TEETH
Roller length 14 cm
€18.00Price
€370.00Price
PRESS FOR wax or POMACE - Ø 15 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 30 x 45 cm - capacity 32 L
Screw diameter 35 mm
Weight 42 Kg
MADE IN ITALY
€370.00Price
PRESS FOR wax or POMACE - Ø 15 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 30 x 45 cm - capacity 32 L
Screw diameter 35 mm
Weight 42 Kg
MADE IN ITALY
PRESS FOR wax or POMACE - Ø 15 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 30 x 45 cm - capacity 32 L
Screw diameter 35 mm
Weight 42 Kg
MADE IN ITALY
€370.00Price
€420.00Price
Galvanized revolving solar WAXER with double glazing 70 x 70 cm - With glass stop rod and glass lift handle Load capacity 2 honeycombs and 4 honeycombs D.B. Stainless steel wax filter - Galvanized steel frame support surface Painted tubular glass frame with lifting handle and iron rod (when open) Painted swivel support (can be disassembled for transport) Containment tray (Cod. QI V01) and internal parts in galvanized sheet Spare glass (Cod. QI V33) Spare stainless steel tray (Cod.QI V34)
€420.00Price
Galvanized revolving solar WAXER with double glazing 70 x 70 cm - With glass stop rod and glass lift handle Load capacity 2 honeycombs and 4 honeycombs D.B. Stainless steel wax filter - Galvanized steel frame support surface Painted tubular glass frame with lifting handle and iron rod (when open) Painted swivel support (can be disassembled for transport) Containment tray (Cod. QI V01) and internal parts in galvanized sheet Spare glass (Cod. QI V33) Spare stainless steel tray (Cod.QI V34)
Galvanized revolving solar WAXER with double glazing 70 x 70 cm - With glass stop rod and glass lift handle Load capacity 2 honeycombs and 4 honeycombs D.B. Stainless steel wax filter - Galvanized steel frame support surface Painted tubular glass frame with lifting handle and iron rod (when open) Painted swivel support (can be disassembled for transport) Containment tray (Cod. QI V01) and internal parts in galvanized sheet Spare glass (Cod. QI V33) Spare stainless steel tray (Cod.QI V34)
€420.00Price
The knives are heated by a hot water heating and recycling unit (included in the machine) and the temperature of the knives can be regulated by a thermostat. The knives also work inside the wooden frame of the combs and can therefore uncaulk even unfilled frames. Knife adjustment is quick and easy by means of a lever located on the side of the uncapping machine that allows tightening or widening the passage between the knives. The combs introduced manually are automatically guided and inserted between the blades to obtain regular and systematic uncapping on both sides.
After the uncapping process, the frames are stored by sliding on the support. The support is made of stainless steel and under it you can place an uncupping table (see the picture). The length of the support varying depends on the length of the uncupping table. Uncapping capacity: approx. 11 frames/minute. Knife temperature: via thermostat from 30° C to 90° C. Power supply: 220 V Absorption: 2.8 KW 13,5 A **MACHINE MANUFACTURED FOR DADANT BLATT FRAMES. ON REQUEST, AFTER RECEIPT OF FRAMES DIMENSIONS, IT CAN ALSO BE MANUFACTURED FOR OTHER FRAME SIZES**
€6,760.00Price
The knives are heated by a hot water heating and recycling unit (included in the machine) and the temperature of the knives can be regulated by a thermostat. The knives also work inside the wooden frame of the combs and can therefore uncaulk even unfilled frames. Knife adjustment is quick and easy by means of a lever located on the side of the uncapping machine that allows tightening or widening the passage between the knives. The combs introduced manually are automatically guided and inserted between the blades to obtain regular and systematic uncapping on both sides.
After the uncapping process, the frames are stored by sliding on the support. The support is made of stainless steel and under it you can place an uncupping table (see the picture). The length of the support varying depends on the length of the uncupping table. Uncapping capacity: approx. 11 frames/minute. Knife temperature: via thermostat from 30° C to 90° C. Power supply: 220 V Absorption: 2.8 KW 13,5 A **MACHINE MANUFACTURED FOR DADANT BLATT FRAMES. ON REQUEST, AFTER RECEIPT OF FRAMES DIMENSIONS, IT CAN ALSO BE MANUFACTURED FOR OTHER FRAME SIZES**
€6,760.00Price
€6,760.00Price
The "Giordan" uncapping machine with heated vibrating knives is a professional machine that replaces the manual uncapping process. The machine is made entirely of AISI 304 stainless steel and works by guiding the frames through two water-heated vibrating knives to obtain a precise and optimal cut of the operculum. With the uncapping machine the opercula are not crumbled but cut, as with the use of a manual knife. With the addition of the double blade kit there is no need to re-uncup the frames after the uncapping process.
€6,760.00Price
The "Giordan" uncapping machine with heated vibrating knives is a professional machine that replaces the manual uncapping process. The machine is made entirely of AISI 304 stainless steel and works by guiding the frames through two water-heated vibrating knives to obtain a precise and optimal cut of the operculum. With the uncapping machine the opercula are not crumbled but cut, as with the use of a manual knife. With the addition of the double blade kit there is no need to re-uncup the frames after the uncapping process.
The "Giordan" uncapping machine with heated vibrating knives is a professional machine that replaces the manual uncapping process. The machine is made entirely of AISI 304 stainless steel and works by guiding the frames through two water-heated vibrating knives to obtain a precise and optimal cut of the operculum. With the uncapping machine the opercula are not crumbled but cut, as with the use of a manual knife. With the addition of the double blade kit there is no need to re-uncup the frames after the uncapping process.
€6,760.00Price
€130.00Price
Table-top uncapping desk, with 600x400x180 mm plastic tank, drainer and frame holder lectern in stainless steel. Without plastic tap
€130.00Price
Table-top uncapping desk, with 600x400x180 mm plastic tank, drainer and frame holder lectern in stainless steel. Without plastic tap
Table-top uncapping desk, with 600x400x180 mm plastic tank, drainer and frame holder lectern in stainless steel. Without plastic tap
€130.00Price
€680.00Price
Rotating STAINLESS STEEL solar WAXING MACHINE with double glazing 70x70 cm with window lifter Double glass mounted on painted galvanized steel frame-Replacement glass (Cod. QI V33) Stainless steel frame support tray (4 for supers or 2 for nests) - Spare stainless steel tray (Cod.QI V34) stainless steel wax filter removable wax tray in stainless steel (code QI V24) pedestal in painted galvanized steel revolving support for orientation of the wax extractor in galvanized steel
€680.00Price
Rotating STAINLESS STEEL solar WAXING MACHINE with double glazing 70x70 cm with window lifter Double glass mounted on painted galvanized steel frame-Replacement glass (Cod. QI V33) Stainless steel frame support tray (4 for supers or 2 for nests) - Spare stainless steel tray (Cod.QI V34) stainless steel wax filter removable wax tray in stainless steel (code QI V24) pedestal in painted galvanized steel revolving support for orientation of the wax extractor in galvanized steel
Rotating STAINLESS STEEL solar WAXING MACHINE with double glazing 70x70 cm with window lifter Double glass mounted on painted galvanized steel frame-Replacement glass (Cod. QI V33) Stainless steel frame support tray (4 for supers or 2 for nests) - Spare stainless steel tray (Cod.QI V34) stainless steel wax filter removable wax tray in stainless steel (code QI V24) pedestal in painted galvanized steel revolving support for orientation of the wax extractor in galvanized steel
€680.00Price
€400.00Price
PRESS FOR wax or POMACE - Ø 35 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions : Cage 35 x 50 cm - capacity 48 L Screw diameter 35 mm Weight 57 Kg MADE IN ITALY
€400.00Price
PRESS FOR wax or POMACE - Ø 35 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions : Cage 35 x 50 cm - capacity 48 L Screw diameter 35 mm Weight 57 Kg MADE IN ITALY
PRESS FOR wax or POMACE - Ø 35 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions : Cage 35 x 50 cm - capacity 48 L Screw diameter 35 mm Weight 57 Kg MADE IN ITALY
€400.00Price
€7,100.00Price
KETTLE for WAX or WAX/HONEY SEPARATOR in stainless steel with double insulated chamber
from 600 Kg - Power supply 230V-4500W
€7,100.00Price
KETTLE for WAX or WAX/HONEY SEPARATOR in stainless steel with double insulated chamber
from 600 Kg - Power supply 230V-4500W
KETTLE for WAX or WAX/HONEY SEPARATOR in stainless steel with double insulated chamber
from 600 Kg - Power supply 230V-4500W
€7,100.00Price
€115.00Price
Electric KNIFE for uncapping - cm 27 (power supply 230 V-50 Hz) with automatic temperature adjustment switch
€115.00Price
Electric KNIFE for uncapping - cm 27 (power supply 230 V-50 Hz) with automatic temperature adjustment switch
Electric KNIFE for uncapping - cm 27 (power supply 230 V-50 Hz) with automatic temperature adjustment switch
€115.00Price
€9,600.00Price
ROUGH WAX PROCESSING in WAXY SHEETS obtained by fusion PRICE FOR PROCESSING PER Kg N.B.: The delivery of the wax for processing and direct exchange with processed wax sheets can only be made in our shop.
€9,600.00Price
ROUGH WAX PROCESSING in WAXY SHEETS obtained by fusion PRICE FOR PROCESSING PER Kg N.B.: The delivery of the wax for processing and direct exchange with processed wax sheets can only be made in our shop.
ROUGH WAX PROCESSING in WAXY SHEETS obtained by fusion PRICE FOR PROCESSING PER Kg N.B.: The delivery of the wax for processing and direct exchange with processed wax sheets can only be made in our shop.
€9,600.00Price
The knives are heated by a hot water heating and recycling unit (included in the machine) and the temperature of the knives can be regulated by a thermostat. The knives also work inside the wooden frame of the combs and can therefore uncaulk even unfilled frames.
Knife adjustment is quick and easy by means of a lever located on the side of the uncapping machine that allows tightening or widening the passage between the knives. The combs introduced manually are automatically guided and inserted between the blades in order to obtain regular and systematic uncapping on both sides.
The press receives the operculum as soon as it has been removed and divides it between wax and honey, thus recovering 90% of the product in a short time and avoiding moving the operculum. The press is equipped with a simple and functional control panel where the speed regulators of the wax squeezing screw with variable pitch are located.
Uncapping capacity: approx. 11 frames/minute.
Knife temperature: via thermostat from 30° C to 90° C.
Power supply: 220 V (also possible in 380 V)
Absorption: 3.50 KW
**MACHINE MANUFACTURED FOR DADANT BLATT FRAMES. ON REQUEST, AFTER RECEIPT OF MEASUREMENTS, IT CAN ALSO BE MANUFACTURED FOR OTHER FRAME SIZES **.
€15,128.00Price
The knives are heated by a hot water heating and recycling unit (included in the machine) and the temperature of the knives can be regulated by a thermostat. The knives also work inside the wooden frame of the combs and can therefore uncaulk even unfilled frames.
Knife adjustment is quick and easy by means of a lever located on the side of the uncapping machine that allows tightening or widening the passage between the knives. The combs introduced manually are automatically guided and inserted between the blades in order to obtain regular and systematic uncapping on both sides.
The press receives the operculum as soon as it has been removed and divides it between wax and honey, thus recovering 90% of the product in a short time and avoiding moving the operculum. The press is equipped with a simple and functional control panel where the speed regulators of the wax squeezing screw with variable pitch are located.
Uncapping capacity: approx. 11 frames/minute.
Knife temperature: via thermostat from 30° C to 90° C.
Power supply: 220 V (also possible in 380 V)
Absorption: 3.50 KW
**MACHINE MANUFACTURED FOR DADANT BLATT FRAMES. ON REQUEST, AFTER RECEIPT OF MEASUREMENTS, IT CAN ALSO BE MANUFACTURED FOR OTHER FRAME SIZES **.
€15,128.00Price
€15,128.00Price
DISOPRESS 2 is a compact professional machine that speeds the uncapping process. The machine consists of the uncapping machine with heated vibrating knives "Giordan" (code 170K) and the operculum press. DISOPRESS 2 is made entirely of AISI 304 stainless steel and works by means of the guided passage of the frames through two water-heated vibrating knives that allow to obtain a precise and optimal cut of the operculum. With the uncapping machine the opercula are not crumbled but cut, as with the use of a manual knife. With the addition of the double blade kit there is no need to re-trim the frames after the uncapping process.
After uncapping, the operculum removed from the frames is unloaded under the uncapping machine where the operculum press unit is installed. The press is made entirely of AISI 304 stainless steel and works cold through a perforated net containing an auger that presses the operculum.
€15,128.00Price
DISOPRESS 2 is a compact professional machine that speeds the uncapping process. The machine consists of the uncapping machine with heated vibrating knives "Giordan" (code 170K) and the operculum press. DISOPRESS 2 is made entirely of AISI 304 stainless steel and works by means of the guided passage of the frames through two water-heated vibrating knives that allow to obtain a precise and optimal cut of the operculum. With the uncapping machine the opercula are not crumbled but cut, as with the use of a manual knife. With the addition of the double blade kit there is no need to re-trim the frames after the uncapping process.
After uncapping, the operculum removed from the frames is unloaded under the uncapping machine where the operculum press unit is installed. The press is made entirely of AISI 304 stainless steel and works cold through a perforated net containing an auger that presses the operculum.
DISOPRESS 2 is a compact professional machine that speeds the uncapping process. The machine consists of the uncapping machine with heated vibrating knives "Giordan" (code 170K) and the operculum press. DISOPRESS 2 is made entirely of AISI 304 stainless steel and works by means of the guided passage of the frames through two water-heated vibrating knives that allow to obtain a precise and optimal cut of the operculum. With the uncapping machine the opercula are not crumbled but cut, as with the use of a manual knife. With the addition of the double blade kit there is no need to re-trim the frames after the uncapping process.
After uncapping, the operculum removed from the frames is unloaded under the uncapping machine where the operculum press unit is installed. The press is made entirely of AISI 304 stainless steel and works cold through a perforated net containing an auger that presses the operculum.
€15,128.00Price
€34.00Price
Lid for the table top, (Cod. LA 4106), in stainless steel - 410x610 mm The lid can be used as a tray for uncapped frames placed vertically in the rack (Cod. LA 4105500)
€34.00Price
Lid for the table top, (Cod. LA 4106), in stainless steel - 410x610 mm The lid can be used as a tray for uncapped frames placed vertically in the rack (Cod. LA 4105500)
Lid for the table top, (Cod. LA 4106), in stainless steel - 410x610 mm The lid can be used as a tray for uncapped frames placed vertically in the rack (Cod. LA 4105500)
€34.00Price
€490.00Price
- Sale
€490.00Price
PRESS FOR wax or POMACE - Ø 40 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 40 x 55 cm - capacity 69 L
Screw diameter 40 mm
Weight 71 Kg
MADE IN ITALY
- Sale
€490.00Price
PRESS FOR wax or POMACE - Ø 40 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 40 x 55 cm - capacity 69 L
Screw diameter 40 mm
Weight 71 Kg
MADE IN ITALY
- Sale
PRESS FOR wax or POMACE - Ø 40 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 40 x 55 cm - capacity 69 L
Screw diameter 40 mm
Weight 71 Kg
MADE IN ITALY
€490.00Price
€560.00Price
COMPLETE WITH RED SUPPORT
NR 2 STAINLESS STEEL WAX COLLECTION TRAYS
SIZE: 55 X 92 X h 21 cm
Stainless steel wax filter - Stainless steel frame support surface
€560.00Price
COMPLETE WITH RED SUPPORT
NR 2 STAINLESS STEEL WAX COLLECTION TRAYS
SIZE: 55 X 92 X h 21 cm
Stainless steel wax filter - Stainless steel frame support surface
COMPLETE WITH RED SUPPORT
NR 2 STAINLESS STEEL WAX COLLECTION TRAYS
SIZE: 55 X 92 X h 21 cm
Stainless steel wax filter - Stainless steel frame support surface
€560.00Price
The knives are heated by a hot water heating and recycling unit (included in the machine) and the temperature of the knives can be regulated by a thermostat. The knives also work inside the wooden frame of the combs and can therefore uncaulk even unfilled frames.
Knife adjustment is quick and easy by means of a lever located on the side of the uncapping machine that allows tightening or widening the passage between the knives. The combs introduced manually are automatically guided and inserted between the blades in order to obtain regular and systematic uncapping on both sides.
After the uncapping process, the frames are stored by sliding them onto the frame. An uncapping bench can be placed under the frame as in the picture (the length of the frame varies according to the length of the bench).
The function of the direct wax melter is to separate the operculum from the honey and directly generate melted wax. As a result, clean melted wax and honey are discharged from two separate drains. In this way, two processes are completed in a single process. The direct wax melter is equipped with a double regulation (one for controlling the temperature of the honey, and the other for regulating the temperature of the melting of the operculum) and with a double outlet (one dedicated to honey and the other to the discharge of wax). The machine is equipped with a simple and functional and functional control panel.
Following careful analyses and evaluations, the use of heat to melt the wax does not alter the freshness index of the honey and its state of preservation. It was therefore found that, in the honeys of the wax melter, the HFM values recorded are well below the threshold provided for by the relevant legislation (Legislative Decree no. 179/2004). For further information see attached report.
Uncapping capacity: about 11 frames/minute.
Knife temperature: via thermostat from 30° C to 90° C.
Power supply: 220 V (also possible in 380 V)
Absorption: 8.8 KW
**MACHINE MANUFACTURED FOR DADANT BLATT FRAMES. ON REQUEST, AFTER RECEIPT OF MEASUREMENTS, IT CAN ALSO BE MANUFACTURED FOR OTHER FRAME SIZES**.
€15,677.00Price
The knives are heated by a hot water heating and recycling unit (included in the machine) and the temperature of the knives can be regulated by a thermostat. The knives also work inside the wooden frame of the combs and can therefore uncaulk even unfilled frames.
Knife adjustment is quick and easy by means of a lever located on the side of the uncapping machine that allows tightening or widening the passage between the knives. The combs introduced manually are automatically guided and inserted between the blades in order to obtain regular and systematic uncapping on both sides.
After the uncapping process, the frames are stored by sliding them onto the frame. An uncapping bench can be placed under the frame as in the picture (the length of the frame varies according to the length of the bench).
The function of the direct wax melter is to separate the operculum from the honey and directly generate melted wax. As a result, clean melted wax and honey are discharged from two separate drains. In this way, two processes are completed in a single process. The direct wax melter is equipped with a double regulation (one for controlling the temperature of the honey, and the other for regulating the temperature of the melting of the operculum) and with a double outlet (one dedicated to honey and the other to the discharge of wax). The machine is equipped with a simple and functional and functional control panel.
Following careful analyses and evaluations, the use of heat to melt the wax does not alter the freshness index of the honey and its state of preservation. It was therefore found that, in the honeys of the wax melter, the HFM values recorded are well below the threshold provided for by the relevant legislation (Legislative Decree no. 179/2004). For further information see attached report.
Uncapping capacity: about 11 frames/minute.
Knife temperature: via thermostat from 30° C to 90° C.
Power supply: 220 V (also possible in 380 V)
Absorption: 8.8 KW
**MACHINE MANUFACTURED FOR DADANT BLATT FRAMES. ON REQUEST, AFTER RECEIPT OF MEASUREMENTS, IT CAN ALSO BE MANUFACTURED FOR OTHER FRAME SIZES**.
€15,677.00Price
€15,677.00Price
DISOMELTER is a compact professional machine consisting of the "Giordan" uncapping machine with heated vibrating knives (code 170K) and the direct wax melter.
The machine is made entirely of AISI 304 stainless steel and works by means of guided passage of the frames through two water-heated vibrating knives that allow to obtain a precise and optimal cut of the operculum. With the uncapping machine the opercula are not crumbled but cut, as with the use of a manual knife. With the addition of the double blade kit there is no need to re-trim the frames after the uncapping process.
After uncapping, the operculum is collected in the direct wax melter underneath the uncapping machine.
€15,677.00Price
DISOMELTER is a compact professional machine consisting of the "Giordan" uncapping machine with heated vibrating knives (code 170K) and the direct wax melter.
The machine is made entirely of AISI 304 stainless steel and works by means of guided passage of the frames through two water-heated vibrating knives that allow to obtain a precise and optimal cut of the operculum. With the uncapping machine the opercula are not crumbled but cut, as with the use of a manual knife. With the addition of the double blade kit there is no need to re-trim the frames after the uncapping process.
After uncapping, the operculum is collected in the direct wax melter underneath the uncapping machine.
DISOMELTER is a compact professional machine consisting of the "Giordan" uncapping machine with heated vibrating knives (code 170K) and the direct wax melter.
The machine is made entirely of AISI 304 stainless steel and works by means of guided passage of the frames through two water-heated vibrating knives that allow to obtain a precise and optimal cut of the operculum. With the uncapping machine the opercula are not crumbled but cut, as with the use of a manual knife. With the addition of the double blade kit there is no need to re-trim the frames after the uncapping process.
After uncapping, the operculum is collected in the direct wax melter underneath the uncapping machine.
€15,677.00Price
€92.00Price
€92.00Price
RTS-RTO T43 twist-off CAP (diam. 43 mm) WHITE COLOR for 50 or 35 g honey jar Smooth EDGE with notches: height = 9 mm
€92.00Price
RTS-RTO T43 twist-off CAP (diam. 43 mm) WHITE COLOR for 50 or 35 g honey jar Smooth EDGE with notches: height = 9 mm
RTS-RTO T43 twist-off CAP (diam. 43 mm) WHITE COLOR for 50 or 35 g honey jar Smooth EDGE with notches: height = 9 mm
€92.00Price
€29.00Price
€29.00Price
Stainless steel frame holder rack, capacity for 9 uncapped honeycombs, placed vertically inside the lid (Cod. LA 4105110) of the table bench, (Cod. LA 4106), it can be used as a tray
€29.00Price
Stainless steel frame holder rack, capacity for 9 uncapped honeycombs, placed vertically inside the lid (Cod. LA 4105110) of the table bench, (Cod. LA 4106), it can be used as a tray
Stainless steel frame holder rack, capacity for 9 uncapped honeycombs, placed vertically inside the lid (Cod. LA 4105110) of the table bench, (Cod. LA 4106), it can be used as a tray
€29.00Price
€700.00Price
PRESS FOR wax or POMACE - Ø 50 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 50 x 65 cm - capacity 127 L
Screw diameter 50 mm
Weight 107 Kg
MADE IN ITALY
€700.00Price
PRESS FOR wax or POMACE - Ø 50 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 50 x 65 cm - capacity 127 L
Screw diameter 50 mm
Weight 107 Kg
MADE IN ITALY
PRESS FOR wax or POMACE - Ø 50 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 50 x 65 cm - capacity 127 L
Screw diameter 50 mm
Weight 107 Kg
MADE IN ITALY
€700.00Price
€1,650.00Price
Rotating stainless steel solar WAXING MACHINE with double glazing 100 x 100 cm
Load capacity 4 nest honeycombs or 8 super honeycombs D.B.
• Stainless steel glass frame with lifting handle and stop rod (when open)
• Four stainless steel legs (removable for transport)
• Four revolving wheels to facilitate orientation of the wax extractor
• Container and internal parts in stainless steel
• Insulated
€1,650.00Price
Rotating stainless steel solar WAXING MACHINE with double glazing 100 x 100 cm
Load capacity 4 nest honeycombs or 8 super honeycombs D.B.
• Stainless steel glass frame with lifting handle and stop rod (when open)
• Four stainless steel legs (removable for transport)
• Four revolving wheels to facilitate orientation of the wax extractor
• Container and internal parts in stainless steel
• Insulated
Rotating stainless steel solar WAXING MACHINE with double glazing 100 x 100 cm
Load capacity 4 nest honeycombs or 8 super honeycombs D.B.
• Stainless steel glass frame with lifting handle and stop rod (when open)
• Four stainless steel legs (removable for transport)
• Four revolving wheels to facilitate orientation of the wax extractor
• Container and internal parts in stainless steel
• Insulated
€1,650.00Price
€23.00Price
Stainless steel KNIFE for uncapping with smooth blade cm23
€23.00Price
Stainless steel KNIFE for uncapping with smooth blade cm23
Stainless steel KNIFE for uncapping with smooth blade cm23
€23.00Price
€1,100.00Price
€1,100.00Price
PRESS FOR wax or POMACE - Ø 55 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 55 x 70 cm - capacity 167 L
Screw diameter 55 mm
Weight 147 Kg
MADE IN ITALY
€1,100.00Price
PRESS FOR wax or POMACE - Ø 55 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 55 x 70 cm - capacity 167 L
Screw diameter 55 mm
Weight 147 Kg
MADE IN ITALY
PRESS FOR wax or POMACE - Ø 55 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 55 x 70 cm - capacity 167 L
Screw diameter 55 mm
Weight 147 Kg
MADE IN ITALY
€1,100.00Price
€60.00Price
GAS STOVE for steam wax extractor for 10-16-32 frames D.B.
(with gas bottle connection)
€60.00Price
GAS STOVE for steam wax extractor for 10-16-32 frames D.B.
(with gas bottle connection)
GAS STOVE for steam wax extractor for 10-16-32 frames D.B.
(with gas bottle connection)
€60.00Price
€27.00Price
Stainless steel KNIFE for uncapping with smooth blade cm 28
€27.00Price
Stainless steel KNIFE for uncapping with smooth blade cm 28
Stainless steel KNIFE for uncapping with smooth blade cm 28
€27.00Price
€1,290.00Price
€1,290.00Price
PRESS FOR wax or POMACE - Ø 60 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 60 x 75 cm - capacity 212 L
Screw diameter 60 mm
Weight 194 Kg
MADE IN ITALY
€1,290.00Price
PRESS FOR wax or POMACE - Ø 60 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 60 x 75 cm - capacity 212 L
Screw diameter 60 mm
Weight 194 Kg
MADE IN ITALY
PRESS FOR wax or POMACE - Ø 60 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High resistance steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents.
Dimensions :
Cage 60 x 75 cm - capacity 212 L
Screw diameter 60 mm
Weight 194 Kg
MADE IN ITALY
€1,290.00Price
€165.00Price
Uncapping bench, with plastic food tank - Dim.: 63 x 46 x 39 cm Complete with drainer for the capsules Hook-on frame holder in chromed steel (Cod. LA 4100500) Plastic cover and painted metal base support (Lectern and faucet not included) OPTIONS : - Chromed lectern (Cod. LA 4160) - 40 mm nylon tap (Cod. QI R11)
€165.00Price
Uncapping bench, with plastic food tank - Dim.: 63 x 46 x 39 cm Complete with drainer for the capsules Hook-on frame holder in chromed steel (Cod. LA 4100500) Plastic cover and painted metal base support (Lectern and faucet not included) OPTIONS : - Chromed lectern (Cod. LA 4160) - 40 mm nylon tap (Cod. QI R11)
Uncapping bench, with plastic food tank - Dim.: 63 x 46 x 39 cm Complete with drainer for the capsules Hook-on frame holder in chromed steel (Cod. LA 4100500) Plastic cover and painted metal base support (Lectern and faucet not included) OPTIONS : - Chromed lectern (Cod. LA 4160) - 40 mm nylon tap (Cod. QI R11)
€165.00Price
€22.00Price
Spare galvanized sheet tray for solar waxer (cod.QI S04)
Size: Length 59 cm - Width 13 cm - Height 8 cm
€22.00Price
Spare galvanized sheet tray for solar waxer (cod.QI S04)
Size: Length 59 cm - Width 13 cm - Height 8 cm
Spare galvanized sheet tray for solar waxer (cod.QI S04)
Size: Length 59 cm - Width 13 cm - Height 8 cm
€22.00Price
€26.00Price
Stainless steel KNIFE for uncapping with jgged blade cm 28
€26.00Price
Stainless steel KNIFE for uncapping with jgged blade cm 28
Stainless steel KNIFE for uncapping with jgged blade cm 28
€26.00Price
€14.00Price
"BUDGET" KNIFE for uncapping with jagged blade cm 28 with plastic handle
€14.00Price
"BUDGET" KNIFE for uncapping with jagged blade cm 28 with plastic handle
"BUDGET" KNIFE for uncapping with jagged blade cm 28 with plastic handle
€14.00Price
€42.00Price
Lectern in chromed steel for uncapping, to be mounted on a plastic bench (Cod. LA 4100)
€42.00Price
Lectern in chromed steel for uncapping, to be mounted on a plastic bench (Cod. LA 4100)
Lectern in chromed steel for uncapping, to be mounted on a plastic bench (Cod. LA 4100)
€42.00Price
OPERCULUM PRESS WITH WHEELED OPENABLE STAINLESS STEEL CAGE - DIAMETER 70 cm - Power supply (400V-3F-50Hz)
ON REQUEST ADDITIONAL CAGE and DOUBLE TROLLEY
THE OPERCULUM PRESS IS SUPPLIED WITH A STAINLESS STEEL AISI 304 STRUCTURE - HEIGHT OF THE BASKET SUPPORT SURFACE WITH A DIFFERENT HEIGHT FROM THE STANDARD (PRICE TO BE DEFINED)
OPERCULUM PRESS WITH WHEELED OPENABLE STAINLESS STEEL CAGE - DIAMETER 70 cm - Power supply (400V-3F-50Hz)
ON REQUEST ADDITIONAL CAGE and DOUBLE TROLLEY
THE OPERCULUM PRESS IS SUPPLIED WITH A STAINLESS STEEL AISI 304 STRUCTURE - HEIGHT OF THE BASKET SUPPORT SURFACE WITH A DIFFERENT HEIGHT FROM THE STANDARD (PRICE TO BE DEFINED)
OPERCULUM PRESS WITH WHEELED OPENABLE STAINLESS STEEL CAGE - DIAMETER 70 cm - Power supply (400V-3F-50Hz)
ON REQUEST ADDITIONAL CAGE and DOUBLE TROLLEY
THE OPERCULUM PRESS IS SUPPLIED WITH A STAINLESS STEEL AISI 304 STRUCTURE - HEIGHT OF THE BASKET SUPPORT SURFACE WITH A DIFFERENT HEIGHT FROM THE STANDARD (PRICE TO BE DEFINED)
€39.00Price
Spare stainless steel TRAY for 70 x 70 cm sun wax waxers (code QI S04 and QI S04I) Dimensions: Length 58 - Width 13 - Height 8 cm
€39.00Price
Spare stainless steel TRAY for 70 x 70 cm sun wax waxers (code QI S04 and QI S04I) Dimensions: Length 58 - Width 13 - Height 8 cm
Spare stainless steel TRAY for 70 x 70 cm sun wax waxers (code QI S04 and QI S04I) Dimensions: Length 58 - Width 13 - Height 8 cm
€39.00Price
€14.00Price
"BUDGET" KNIFE for uncapping with smooth blade cm 28 with plastic handle
€14.00Price
"BUDGET" KNIFE for uncapping with smooth blade cm 28 with plastic handle
"BUDGET" KNIFE for uncapping with smooth blade cm 28 with plastic handle
€14.00Price
€60.00Price
Replacement Double Glass for Sun Waxers 70 x 70 cm - The glass is available without the support frame
Galvanized model (Cod. QI S04)
Stainless steel model (Code QI S04I)
€60.00Price
Replacement Double Glass for Sun Waxers 70 x 70 cm - The glass is available without the support frame
Galvanized model (Cod. QI S04)
Stainless steel model (Code QI S04I)
Replacement Double Glass for Sun Waxers 70 x 70 cm - The glass is available without the support frame
Galvanized model (Cod. QI S04)
Stainless steel model (Code QI S04I)
€60.00Price
