Instructions for use Extraction: Use the supplied spatula to extract three whole larvae showing suspicious symptoms. Unscrew the lid of the extraction bottle. Deposit the larvae into the bottle, again using the spatula. Shake vigorously so that the larvae soak into the buffer solution. CAUTION - The bottle contains buffer solution and sodium azide; not to be used for human use. Carefully screw the lid back on and shake vigorously for about 20 seconds so that the larvae mix well with the buffer solution. Performing the test: Remove a test device from the aluminum package. WARNING Do not touch the viewing window. Unscrew the lid of the bottle and with the dropper provided, take a good amount of solute. For best results, draw out the solute immediately after shaking so as to prevent bacteria from settling out of the suspension. Hold the device horizontally and gently drop 2-3 drops into the 'well provided. Hold the device horizontally until the extract is absorbed (about 30 seconds) and blue coloration appears in the display window. Wait until the control line (indicated by the letter C) appears and read the result (about 1-3 minutes). Take care to dispose of the test in an environmentally friendly manner. At low temperatures, the test takes longer; the ideal temperature for the test is 18°C and above. Interpretation of resultsAfter 3 minutes, the control line should be clearly visible in the display window of the device. A positive result (indicated by the appearance of both the test line and the control line-see below) indicates that the pathogen sought is present in the sample, and that the larvae taken has been infected with American foulbrood. Note that even a faint T-line indicates a positive result.A negative result (only appearance of the control line, test line absent) indicates that the sample does not have American foulbrood pathogens. A negative test result does not guarantee the absence of AFB infection in some other part of the colony than the sample tested. Choose the sample with the utmost care.

The wipes are impregnated with essential oils derived from plants, and the mixture used is the result of many years of research. The attractants have been selected to attract passing swarms or swarms exiting hives and thus prevent abandonment of the apiary. Method of use Tear the bag open slightly or pierce the bag producing an opening so that it can be hung in a convenient place(such as a tree),but better yet inside a decoy Beehive. Several decoy beehives can be arranged in the apiary at a maximum distance of 50 meters from the hives. Once the bag is opened,the wipe with the attractants is effective for about 10 days,depending on environmental conditions(if hot the substance is dissipated more quickly). The optimal height of placing the bag is 1.8 to 2 meters above the ground. When used in a decoy Beehive,it is ideal to attach it to an old and empty nest canvas. The ideal orientation of the decoy beehive is with the flight opening facing south.

-

Avoids eye fatigue: thanks to the integration of optical elements, it perfectly combines the natural cold, shadow-free light source with the optical function of the lens. Equipped with 11 W circular tube lamp (220 V 4 PIN attachment) with luminescent power that increases brightness up to 150% and saves up to 80% electricity

nan