€4,350.00Regular price-€450.00€4,800.00Price
Special Products
Featured Products
Subcategory
€0.38Price
GLASS CONTAINER for 30-mL yellow bottles - with SECURITY SEAL FOR INTEGRITY PACKAGE - PFP 18 BOTTLE PACK of 104 pieces
€0.38Price
GLASS CONTAINER for 30-mL yellow bottles - with SECURITY SEAL FOR INTEGRITY PACKAGE - PFP 18 BOTTLE PACK of 104 pieces
GLASS CONTAINER for 30-mL yellow bottles - with SECURITY SEAL FOR INTEGRITY PACKAGE - PFP 18 BOTTLE PACK of 104 pieces
€0.38Price
€37.00Price
Metal SUPPORT for 50 kg ripener- Ø 320 mm Painted red
€37.00Price
Metal SUPPORT for 50 kg ripener- Ø 320 mm Painted red
Metal SUPPORT for 50 kg ripener- Ø 320 mm Painted red
€37.00Price
With this machine complete in every part, it will be possible to speed up uncapping and use the Extractor effectively. The output of the machine, is a minimum of 150 frames per hour, but you can get up to 250 frames per hour. Uncapping is carried out by knives placed parallel to the two sides of the frames, simultaneously on both sides.Due to the special structure of the blades, the cells are not damaged and therefore no deposits are formed on the blades.It does not require any kind of heating. The adjustment of the blades to the various frame sizes is done quickly, with a simple movement. The blades do not touch the slats of the frames but do not move within them, so no damage is generated on either the blades or the frames. The distance between the blades can also be easily adjusted during operation with the foot pedal or hand lever. The cut wax falls into a collection container equipped with a filter, and from here the honey then drips into the lower part of the container. It is also equipped with a convenient Honey super stand. It is available with 12 V or 230 V motor.
€3,950.00Price
With this machine complete in every part, it will be possible to speed up uncapping and use the Extractor effectively. The output of the machine, is a minimum of 150 frames per hour, but you can get up to 250 frames per hour. Uncapping is carried out by knives placed parallel to the two sides of the frames, simultaneously on both sides.Due to the special structure of the blades, the cells are not damaged and therefore no deposits are formed on the blades.It does not require any kind of heating. The adjustment of the blades to the various frame sizes is done quickly, with a simple movement. The blades do not touch the slats of the frames but do not move within them, so no damage is generated on either the blades or the frames. The distance between the blades can also be easily adjusted during operation with the foot pedal or hand lever. The cut wax falls into a collection container equipped with a filter, and from here the honey then drips into the lower part of the container. It is also equipped with a convenient Honey super stand. It is available with 12 V or 230 V motor.
€3,950.00Price
€3,950.00Price
Semiautomatic Konigin stainless steel uncapping machine, complete with operculum collecting tank, frame rack and honeycomb holderMachine size: 120x100x160 cm - Weight 70 KgElectrical power supply: 230V-50Hz
€3,950.00Price
Semiautomatic Konigin stainless steel uncapping machine, complete with operculum collecting tank, frame rack and honeycomb holderMachine size: 120x100x160 cm - Weight 70 KgElectrical power supply: 230V-50Hz
Semiautomatic Konigin stainless steel uncapping machine, complete with operculum collecting tank, frame rack and honeycomb holderMachine size: 120x100x160 cm - Weight 70 KgElectrical power supply: 230V-50Hz
€3,950.00Price
CANDIFRUCT is a paste consisting of sugar (sucrose) with balanced addition of glucose-fructose syrup that is obtained by a gentle steaming process. Due to its very fine crystals and the presence of fructose, it is very palatable and easily assimilated by bees. The presence of fructose gives softness, mellowness and texture to the product, avoiding hardening problems. CANDIFRUCT is the ideal food for the winter maintenance of families, especially in the absence of stocks. It is a very practical product as it can be fed to bees without the need for specific feeders.
€23.50Price
CANDIFRUCT is a paste consisting of sugar (sucrose) with balanced addition of glucose-fructose syrup that is obtained by a gentle steaming process. Due to its very fine crystals and the presence of fructose, it is very palatable and easily assimilated by bees. The presence of fructose gives softness, mellowness and texture to the product, avoiding hardening problems. CANDIFRUCT is the ideal food for the winter maintenance of families, especially in the absence of stocks. It is a very practical product as it can be fed to bees without the need for specific feeders.
€23.50Price
€23.50Price
Pack of 12 packages of 1 kg - total 12 kg Candied Paste Microraffinate Complementary Feed Composition :Sugar , Glucose Syrup , Fructose Syrup Total Sugars :88.5% See attached data sheet
€23.50Price
Pack of 12 packages of 1 kg - total 12 kg Candied Paste Microraffinate Complementary Feed Composition :Sugar , Glucose Syrup , Fructose Syrup Total Sugars :88.5% See attached data sheet
Pack of 12 packages of 1 kg - total 12 kg Candied Paste Microraffinate Complementary Feed Composition :Sugar , Glucose Syrup , Fructose Syrup Total Sugars :88.5% See attached data sheet
€23.50Price
How to perform the treatment 1) Hook up the terminals to the battery, respecting the polarity (red+, black -). After about 1 minute, you can proceed with the treatment. 2) Pour in 2.5 g. of oxalic acid with the dispenser provided for 10-frame Beehives, halving the dose for 6-frame Nucleus hives. 3) On average after 1 1/2 minutes you can switch to another Beehive; it is recommended not to turn off the device in treatment series. 4) Turn off BioletalVarroa® only at the end of the uninterrupted series of treatments to avoid overheating of the bowl and unnecessary energy consumption. 5) For practicality, less disturbance to the bees and better defense for the Beekeeper, we recommend to drill, on the back of the Beehive, a hole (45x12mm) skimming the bottom net, and perform the treatment from this , taking care to close with a cloth the entrance/exit bees from the step for about 5 minutes. This opening, after treatment, can be closed with a simple sheet of metal. 6) To perform the treatment from the entrance/exit bees from the step, it is recommended to operate with a wooden lath, or with a rag.
€172.00Price
How to perform the treatment 1) Hook up the terminals to the battery, respecting the polarity (red+, black -). After about 1 minute, you can proceed with the treatment. 2) Pour in 2.5 g. of oxalic acid with the dispenser provided for 10-frame Beehives, halving the dose for 6-frame Nucleus hives. 3) On average after 1 1/2 minutes you can switch to another Beehive; it is recommended not to turn off the device in treatment series. 4) Turn off BioletalVarroa® only at the end of the uninterrupted series of treatments to avoid overheating of the bowl and unnecessary energy consumption. 5) For practicality, less disturbance to the bees and better defense for the Beekeeper, we recommend to drill, on the back of the Beehive, a hole (45x12mm) skimming the bottom net, and perform the treatment from this , taking care to close with a cloth the entrance/exit bees from the step for about 5 minutes. This opening, after treatment, can be closed with a simple sheet of metal. 6) To perform the treatment from the entrance/exit bees from the step, it is recommended to operate with a wooden lath, or with a rag.
€172.00Price
€172.00Price
BioLetalVarroa - Oxalic Acid Sublimator Alinentation 12 V (SEE ATTACHED DOCUMENTS WITH TECHNICAL INFORMATION)
€172.00Price
BioLetalVarroa - Oxalic Acid Sublimator Alinentation 12 V (SEE ATTACHED DOCUMENTS WITH TECHNICAL INFORMATION)
BioLetalVarroa - Oxalic Acid Sublimator Alinentation 12 V (SEE ATTACHED DOCUMENTS WITH TECHNICAL INFORMATION)
€172.00Price
The wipes are impregnated with essential oils derived from plants, and the mixture used is the result of many years of research. The attractants have been selected to attract passing swarms or swarms exiting hives and thus prevent abandonment of the apiary. Method of use Tear the bag open slightly or pierce the bag producing an opening so that it can be hung in a convenient place(such as a tree),but better yet inside a decoy Beehive. Several decoy beehives can be arranged in the apiary at a maximum distance of 50 meters from the hives. Once the bag is opened,the wipe with the attractants is effective for about 10 days,depending on environmental conditions(if hot the substance is dissipated more quickly). The optimal height of placing the bag is 1.8 to 2 meters above the ground. When used in a decoy Beehive,it is ideal to attach it to an old and empty nest canvas. The ideal orientation of the decoy beehive is with the flight opening facing south.
€2.80Price
The wipes are impregnated with essential oils derived from plants, and the mixture used is the result of many years of research. The attractants have been selected to attract passing swarms or swarms exiting hives and thus prevent abandonment of the apiary. Method of use Tear the bag open slightly or pierce the bag producing an opening so that it can be hung in a convenient place(such as a tree),but better yet inside a decoy Beehive. Several decoy beehives can be arranged in the apiary at a maximum distance of 50 meters from the hives. Once the bag is opened,the wipe with the attractants is effective for about 10 days,depending on environmental conditions(if hot the substance is dissipated more quickly). The optimal height of placing the bag is 1.8 to 2 meters above the ground. When used in a decoy Beehive,it is ideal to attach it to an old and empty nest canvas. The ideal orientation of the decoy beehive is with the flight opening facing south.
€2.80Price
€2.80Price
SWARM Swarm Attractant - 1 sachet containing wipes soaked in bee swarm attractants Product authorized for veterinary use, store in refrigerator
€2.80Price
SWARM Swarm Attractant - 1 sachet containing wipes soaked in bee swarm attractants Product authorized for veterinary use, store in refrigerator
SWARM Swarm Attractant - 1 sachet containing wipes soaked in bee swarm attractants Product authorized for veterinary use, store in refrigerator
€2.80Price
€1,040.00Price
RADIAL Extractor D.B. MOTOR - with digital speed controller - 230V/100W -rotation in the 2 directions - with NYLON basket for 9 Honey super frames (or 3 nest frames with additional cages) - (basket Cod. QI C45) -Ø 525 mm- with Ø 40 mm nylon cutting tap For nest frames No. 3 additional stainless steel cages not included (Cod. QI G06) are required.
€1,040.00Price
RADIAL Extractor D.B. MOTOR - with digital speed controller - 230V/100W -rotation in the 2 directions - with NYLON basket for 9 Honey super frames (or 3 nest frames with additional cages) - (basket Cod. QI C45) -Ø 525 mm- with Ø 40 mm nylon cutting tap For nest frames No. 3 additional stainless steel cages not included (Cod. QI G06) are required.
RADIAL Extractor D.B. MOTOR - with digital speed controller - 230V/100W -rotation in the 2 directions - with NYLON basket for 9 Honey super frames (or 3 nest frames with additional cages) - (basket Cod. QI C45) -Ø 525 mm- with Ø 40 mm nylon cutting tap For nest frames No. 3 additional stainless steel cages not included (Cod. QI G06) are required.
€1,040.00Price
Tinned iron wire, for wax sheet reinforcement, in 150g skein with special unwinder.
€3.70Price
Tinned iron wire, for wax sheet reinforcement, in 150g skein with special unwinder.
€3.70Price
€3.70Price
Tinned iron wire, for wax sheet reinforcement, in 150g skein with special unwinder.
€3.70Price
Tinned iron wire, for wax sheet reinforcement, in 150g skein with special unwinder.
Tinned iron wire, for wax sheet reinforcement, in 150g skein with special unwinder.
€3.70Price
€6.50Price
DIAPHRAGM made of high-density polystyrene mounted in the nest frame for D.B. Beehives Polystyrene diaphragm thickness 30 mm
€6.50Price
DIAPHRAGM made of high-density polystyrene mounted in the nest frame for D.B. Beehives Polystyrene diaphragm thickness 30 mm
DIAPHRAGM made of high-density polystyrene mounted in the nest frame for D.B. Beehives Polystyrene diaphragm thickness 30 mm
€6.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€19.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€19.50Price
€19.50Price
Mold height: 60 mm - Wick: 3 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€19.50Price
Mold height: 60 mm - Wick: 3 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 60 mm - Wick: 3 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€19.50Price
€8.00Price
Uncapping fork Uncapping is faster and more precise.It is used by pulling it, with the double blade, you finish the recessed parts of the operculum - Made of Food grade plastic - Stainless Steel blade - Ergonomic handle
€8.00Price
Uncapping fork Uncapping is faster and more precise.It is used by pulling it, with the double blade, you finish the recessed parts of the operculum - Made of Food grade plastic - Stainless Steel blade - Ergonomic handle
Uncapping fork Uncapping is faster and more precise.It is used by pulling it, with the double blade, you finish the recessed parts of the operculum - Made of Food grade plastic - Stainless Steel blade - Ergonomic handle
€8.00Price
€24.00Price
Professional long leather gloves with extra long edge, LEGA brand, with cotton sleeve.
The extra-long knit sleeve on the arms, with an elasticized hem at the bottom, allows it to fit completely over the suit or protective vest.
Available sizes: 7 (S) - 8 (M) - 9 (L) - 10 (XL) - 11 (XXL)
€24.00Price
Professional long leather gloves with extra long edge, LEGA brand, with cotton sleeve.
The extra-long knit sleeve on the arms, with an elasticized hem at the bottom, allows it to fit completely over the suit or protective vest.
Available sizes: 7 (S) - 8 (M) - 9 (L) - 10 (XL) - 11 (XXL)
Professional long leather gloves with extra long edge, LEGA brand, with cotton sleeve.
The extra-long knit sleeve on the arms, with an elasticized hem at the bottom, allows it to fit completely over the suit or protective vest.
Available sizes: 7 (S) - 8 (M) - 9 (L) - 10 (XL) - 11 (XXL)
€24.00Price
€3.50Price
RING GASKET OR 4563 Culatte MINOR for ROTARY VOLUMETRIC PUMP ( cod. LI 5527GRM40 and LI 5537GRM40 ) Dim:86 x 2 mm SPARE
€3.50Price
RING GASKET OR 4563 Culatte MINOR for ROTARY VOLUMETRIC PUMP ( cod. LI 5527GRM40 and LI 5537GRM40 ) Dim:86 x 2 mm SPARE
RING GASKET OR 4563 Culatte MINOR for ROTARY VOLUMETRIC PUMP ( cod. LI 5527GRM40 and LI 5537GRM40 ) Dim:86 x 2 mm SPARE
€3.50Price
€4.00Price
APICALM pellet vegetable fuel for smokers, 1kg bag
Pellet vegetable fuel made from olive processing, ideal for abundant smoke.
To use this type of fuel, it is necessary that the smoker be complete with a cylindrical steel container
€4.00Price
APICALM pellet vegetable fuel for smokers, 1kg bag
Pellet vegetable fuel made from olive processing, ideal for abundant smoke.
To use this type of fuel, it is necessary that the smoker be complete with a cylindrical steel container
APICALM pellet vegetable fuel for smokers, 1kg bag
Pellet vegetable fuel made from olive processing, ideal for abundant smoke.
To use this type of fuel, it is necessary that the smoker be complete with a cylindrical steel container
€4.00Price
Beehives D.B. 10 honeycomb painted only standard nest with movable anti-moth net bottom . Nest; honeycomb cover with 4-position disk mounted; 10-cm-high galvanized sheet metal cover lined with wood and faestile on bottom; canopy the galvanized sheet metal; plastic transport mask; galvanized pinwheels; metal door; 3 connection corners; spacers mounted in the nest movable anti-varroa mesh bottom with galvanized sheet metal tray removable from the back; 25-mm-thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest; spring hook with screws for fixing movable bottom
€95.00Price
Beehives D.B. 10 honeycomb painted only standard nest with movable anti-moth net bottom . Nest; honeycomb cover with 4-position disk mounted; 10-cm-high galvanized sheet metal cover lined with wood and faestile on bottom; canopy the galvanized sheet metal; plastic transport mask; galvanized pinwheels; metal door; 3 connection corners; spacers mounted in the nest movable anti-varroa mesh bottom with galvanized sheet metal tray removable from the back; 25-mm-thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest; spring hook with screws for fixing movable bottom
€95.00Price
€95.00Price
Beehives Beehives Dadant Blatt 10-frame standard nest only, with movable anti-varroa net bottom (Frames NOT included) Water-painted.
(THE COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€95.00Price
Beehives Beehives Dadant Blatt 10-frame standard nest only, with movable anti-varroa net bottom (Frames NOT included) Water-painted.
(THE COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehives Beehives Dadant Blatt 10-frame standard nest only, with movable anti-varroa net bottom (Frames NOT included) Water-painted.
(THE COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€95.00Price
€0.29Price
MONODOSE JAR for HONEY (40 g) PLASTIC with white interlocking cap
€0.29Price
MONODOSE JAR for HONEY (40 g) PLASTIC with white interlocking cap
MONODOSE JAR for HONEY (40 g) PLASTIC with white interlocking cap
€0.29Price
€0.78Price
SET FOR REAL PAPA complete with: Box , 10/15-mL obscured yellow glass bottle with plastic closure and paddle
Package in thermopack of 170 pieces
10/15 ml bottle: (Code AS 018)
Plastic paddle : (Code FO 3754)
Box: (Code HY S0002)
€0.78Price
SET FOR REAL PAPA complete with: Box , 10/15-mL obscured yellow glass bottle with plastic closure and paddle
Package in thermopack of 170 pieces
10/15 ml bottle: (Code AS 018)
Plastic paddle : (Code FO 3754)
Box: (Code HY S0002)
SET FOR REAL PAPA complete with: Box , 10/15-mL obscured yellow glass bottle with plastic closure and paddle
Package in thermopack of 170 pieces
10/15 ml bottle: (Code AS 018)
Plastic paddle : (Code FO 3754)
Box: (Code HY S0002)
€0.78Price
€0.54Price
ORCIO GLASS JAR 106 ml - for HONEY 130 g
h = 62 mm diam.= 62.5 mm weight = 100 g
IN TERMOPACHS OF 42 PIECES
For CAPSULES:
- CLASSIC FLAT
- PASTEURIZATION WITH FLIP
- STERILIZATION WITH FLIP
€0.54Price
ORCIO GLASS JAR 106 ml - for HONEY 130 g
h = 62 mm diam.= 62.5 mm weight = 100 g
IN TERMOPACHS OF 42 PIECES
For CAPSULES:
- CLASSIC FLAT
- PASTEURIZATION WITH FLIP
- STERILIZATION WITH FLIP
ORCIO GLASS JAR 106 ml - for HONEY 130 g
h = 62 mm diam.= 62.5 mm weight = 100 g
IN TERMOPACHS OF 42 PIECES
For CAPSULES:
- CLASSIC FLAT
- PASTEURIZATION WITH FLIP
- STERILIZATION WITH FLIP
€0.54Price
€0.61Price
FLACON : 10 ml - Ø 25 mm - h 58.5 mm - Mouth PFP 18 CONTAINER 10 ml WITH SAFETY BAND FOR INTEGRITY PACKAGE Packaged in thermopack of 170 pieces
€0.61Price
FLACON : 10 ml - Ø 25 mm - h 58.5 mm - Mouth PFP 18 CONTAINER 10 ml WITH SAFETY BAND FOR INTEGRITY PACKAGE Packaged in thermopack of 170 pieces
FLACON : 10 ml - Ø 25 mm - h 58.5 mm - Mouth PFP 18 CONTAINER 10 ml WITH SAFETY BAND FOR INTEGRITY PACKAGE Packaged in thermopack of 170 pieces
€0.61Price
APIGUARD- treatment of varroasis of bees caused by Varroa destructor, 10-pack product features in the section (DOWNLOAD)
€29.00Price
APIGUARD- treatment of varroasis of bees caused by Varroa destructor, 10-pack product features in the section (DOWNLOAD)
€29.00Price
€29.00Price
APIGUARD Thymol in Gel for Varroa control for bee families, 50 g tray - in pack of 10. 42 AUTHORIZED PRODUCT for VETERINARY USE THIS PRODUCT CAN ONLY BE SOLD IN ITALY Technical data sheet see attached.
€29.00Price
APIGUARD Thymol in Gel for Varroa control for bee families, 50 g tray - in pack of 10. 42 AUTHORIZED PRODUCT for VETERINARY USE THIS PRODUCT CAN ONLY BE SOLD IN ITALY Technical data sheet see attached.
APIGUARD Thymol in Gel for Varroa control for bee families, 50 g tray - in pack of 10. 42 AUTHORIZED PRODUCT for VETERINARY USE THIS PRODUCT CAN ONLY BE SOLD IN ITALY Technical data sheet see attached.
€29.00Price
€6.00Price
Wick made of paraffin-impregnated cotton filaments - wick height 25 mm with 3x10 weave, 30 strands, the more strands the wick has, the higher the flame.15 mm diameter tin base, 100% ready to usePack of 100 piecesBurn evenly and do not make smoke. They are ideal for both hobbyists and professionals.
€6.00Price
Wick made of paraffin-impregnated cotton filaments - wick height 25 mm with 3x10 weave, 30 strands, the more strands the wick has, the higher the flame.15 mm diameter tin base, 100% ready to usePack of 100 piecesBurn evenly and do not make smoke. They are ideal for both hobbyists and professionals.
Wick made of paraffin-impregnated cotton filaments - wick height 25 mm with 3x10 weave, 30 strands, the more strands the wick has, the higher the flame.15 mm diameter tin base, 100% ready to usePack of 100 piecesBurn evenly and do not make smoke. They are ideal for both hobbyists and professionals.
€6.00Price
€0.10Price
Twist-off cap RTS-RTO TO 53 (diameter 53 mm) for 130 g - 106 ml honey jars
Smooth edge with notches: height = 10 mm
BOX of 2000
COLOR OPTIONS: honeycomb - gold - silver - white - black
€0.10Price
Twist-off cap RTS-RTO TO 53 (diameter 53 mm) for 130 g - 106 ml honey jars
Smooth edge with notches: height = 10 mm
BOX of 2000
COLOR OPTIONS: honeycomb - gold - silver - white - black
Twist-off cap RTS-RTO TO 53 (diameter 53 mm) for 130 g - 106 ml honey jars
Smooth edge with notches: height = 10 mm
BOX of 2000
COLOR OPTIONS: honeycomb - gold - silver - white - black
€0.10Price
REGINA Glass JAR for HONEY 500 g - 390 ml
€0.38Price
REGINA Glass JAR for HONEY 500 g - 390 ml
€0.38Price
€0.38Price
REGINA glass jar for honey, 500 g - 390 ml - TO 70 opening (diameter 70 mm)
H = 103 mm - Diameter = 80 mm - weight 190 g
IN 24-piece heat-sealed pack (The quantity ordered refers to individual jars, not heat-sealed packs)
For CAPSULES:
- CLASSIC FLAT
- PASTEURIZATION WITH FLIP
- STERILIZATION WITH FLIP
€0.38Price
REGINA glass jar for honey, 500 g - 390 ml - TO 70 opening (diameter 70 mm)
H = 103 mm - Diameter = 80 mm - weight 190 g
IN 24-piece heat-sealed pack (The quantity ordered refers to individual jars, not heat-sealed packs)
For CAPSULES:
- CLASSIC FLAT
- PASTEURIZATION WITH FLIP
- STERILIZATION WITH FLIP
REGINA glass jar for honey, 500 g - 390 ml - TO 70 opening (diameter 70 mm)
H = 103 mm - Diameter = 80 mm - weight 190 g
IN 24-piece heat-sealed pack (The quantity ordered refers to individual jars, not heat-sealed packs)
For CAPSULES:
- CLASSIC FLAT
- PASTEURIZATION WITH FLIP
- STERILIZATION WITH FLIP
€0.38Price
This core consists of a nest, 2 small doors, one in front and one behind the nest, has 2 paraffin-coated hollow covers, with a central chimney above. A masonite cover is placed on top of the hatch cover; as a closure there is an electro-welded roof covering both hatch covers. A sheet metal sheet separates the two compartments. The wooden bottom has a hole in the center covered with expanded metal sheet for ventilation. METHOD OF USE: You must open the frame and replace it with a frame inside the Beehive. Leave it long enough for your family to allow the brood to settle and transfer it to the Nucleus hive free work along with some bees. They, noting the absence of a queen bee, will make their own cell. For each frame you need to repeat the same procedure. At the end of the treatment you will have your 2 mini-nuclei with fertilized queen. Only recommendation: keep the Nucleus hive 3 km. away from the apiary or closed 2 days.
€48.00Price
This core consists of a nest, 2 small doors, one in front and one behind the nest, has 2 paraffin-coated hollow covers, with a central chimney above. A masonite cover is placed on top of the hatch cover; as a closure there is an electro-welded roof covering both hatch covers. A sheet metal sheet separates the two compartments. The wooden bottom has a hole in the center covered with expanded metal sheet for ventilation. METHOD OF USE: You must open the frame and replace it with a frame inside the Beehive. Leave it long enough for your family to allow the brood to settle and transfer it to the Nucleus hive free work along with some bees. They, noting the absence of a queen bee, will make their own cell. For each frame you need to repeat the same procedure. At the end of the treatment you will have your 2 mini-nuclei with fertilized queen. Only recommendation: keep the Nucleus hive 3 km. away from the apiary or closed 2 days.
€48.00Price
€48.00Price
Nucleus hive for the production of Queen Bees with 2 compartments type Free Work T2. Complete with 2 accordion frames Code PI 45E (elongated have the same measurements as a nest frame). For 2 fertilization nuclei External dimensions: mm 210x295x420
€48.00Price
Nucleus hive for the production of Queen Bees with 2 compartments type Free Work T2. Complete with 2 accordion frames Code PI 45E (elongated have the same measurements as a nest frame). For 2 fertilization nuclei External dimensions: mm 210x295x420
Nucleus hive for the production of Queen Bees with 2 compartments type Free Work T2. Complete with 2 accordion frames Code PI 45E (elongated have the same measurements as a nest frame). For 2 fertilization nuclei External dimensions: mm 210x295x420
€48.00Price
€115.00Price
Stainless steel basket for Tangential extractor 6 frames D.B. Honey super or 3 frames D.B. nest or 3 frames LAYENT from nest Pocket 35.5 x 43 cm Extractor diameter 525 mm Diameter 16 mm shaft bushing
€115.00Price
Stainless steel basket for Tangential extractor 6 frames D.B. Honey super or 3 frames D.B. nest or 3 frames LAYENT from nest Pocket 35.5 x 43 cm Extractor diameter 525 mm Diameter 16 mm shaft bushing
Stainless steel basket for Tangential extractor 6 frames D.B. Honey super or 3 frames D.B. nest or 3 frames LAYENT from nest Pocket 35.5 x 43 cm Extractor diameter 525 mm Diameter 16 mm shaft bushing
€115.00Price
€9.50Price
STAINLESS STEEL PICKING-LARVE PICKING with 2 different heads
€9.50Price
STAINLESS STEEL PICKING-LARVE PICKING with 2 different heads
STAINLESS STEEL PICKING-LARVE PICKING with 2 different heads
€9.50Price
Triple-wall insulated mixer capacity kg 1950 400V 9Kw
€20,600.00Price
Triple-wall insulated mixer capacity kg 1950 400V 9Kw
€20,600.00Price
€20,600.00Price
Triple-wall insulated mixer capacity kg. 1950 400V 9Kw
€20,600.00Price
Triple-wall insulated mixer capacity kg. 1950 400V 9Kw
Triple-wall insulated mixer capacity kg. 1950 400V 9Kw
€20,600.00Price
€26.00Price
€26.00Price
€26.00Price
€127.00Price
STAINLESS STEEL FILTER in full-diameter mesh for 300-kg HONEY BILLS (Conai and others) - diameter 565 mm
€127.00Price
STAINLESS STEEL FILTER in full-diameter mesh for 300-kg HONEY BILLS (Conai and others) - diameter 565 mm
STAINLESS STEEL FILTER in full-diameter mesh for 300-kg HONEY BILLS (Conai and others) - diameter 565 mm
€127.00Price
€67.00Price
18/10 STAINLESS STEEL OIL CONTAINER - Ø 304 mm - height 494 mm - opening 200 mm Prepared for 1/2" tap (NOT INCLUDED) (Cod. QI R21) and (Cod.4F RUB1) Large top opening (Ø 200 mm) that facilitates filling and cleaning. Ideal for oil storage and for transporting oil, wine, liquor or water. OPTIONS:-TIG-welded: welded bottom that ensures better hygiene, provided with a plastic "bottom cover" that allows movements of the drum without damaging the bottom. Fully TIG-welded. -Crimped without welding.
€67.00Price
18/10 STAINLESS STEEL OIL CONTAINER - Ø 304 mm - height 494 mm - opening 200 mm Prepared for 1/2" tap (NOT INCLUDED) (Cod. QI R21) and (Cod.4F RUB1) Large top opening (Ø 200 mm) that facilitates filling and cleaning. Ideal for oil storage and for transporting oil, wine, liquor or water. OPTIONS:-TIG-welded: welded bottom that ensures better hygiene, provided with a plastic "bottom cover" that allows movements of the drum without damaging the bottom. Fully TIG-welded. -Crimped without welding.
18/10 STAINLESS STEEL OIL CONTAINER - Ø 304 mm - height 494 mm - opening 200 mm Prepared for 1/2" tap (NOT INCLUDED) (Cod. QI R21) and (Cod.4F RUB1) Large top opening (Ø 200 mm) that facilitates filling and cleaning. Ideal for oil storage and for transporting oil, wine, liquor or water. OPTIONS:-TIG-welded: welded bottom that ensures better hygiene, provided with a plastic "bottom cover" that allows movements of the drum without damaging the bottom. Fully TIG-welded. -Crimped without welding.
€67.00Price
€1,245.00Price
400 kg STAINLESS STEEL MATURATOR- 3 legs TIGv welded- total fontal discharge Prepared for 50/2" mm diameter TAP NOT INCLUDEDSloping bottom with total frontal dischargeInterior stainless steel drum 1 mm thickDust cover with knobDesigned to be used as a feeder to honey dispensers
€1,245.00Price
400 kg STAINLESS STEEL MATURATOR- 3 legs TIGv welded- total fontal discharge Prepared for 50/2" mm diameter TAP NOT INCLUDEDSloping bottom with total frontal dischargeInterior stainless steel drum 1 mm thickDust cover with knobDesigned to be used as a feeder to honey dispensers
400 kg STAINLESS STEEL MATURATOR- 3 legs TIGv welded- total fontal discharge Prepared for 50/2" mm diameter TAP NOT INCLUDEDSloping bottom with total frontal dischargeInterior stainless steel drum 1 mm thickDust cover with knobDesigned to be used as a feeder to honey dispensers
€1,245.00Price
RADIAL Extractor for 60 Honey super combs or 30 nest combs diameter 1300-1Kw-230V. Stainless steel drum 1 mm thick. -florinated or satin-finished stainless steel finish(subject to availability). Full discharge, stainless steel reinforcement bands. Direct honey discharge without tap. 4 stainless steel legs. Double upper bar for fixing stainless steel 'shaft bearing. Stainless steel basket- loading capacity with 60 Honey super frames or 30 nest frames D.B. 3 opening points at lid. 1.5Hp motor- housed under the drum(stainless steel motor mounts). Speed reducer applied to 'basket shaft. Electronic programming with membrane control panel. Motor lock. Safety locks at lids. Stainless steel electric square support(optional). Machine weight empty kg 175. Power supply 230V-1Kw.
€7,000.00Price
RADIAL Extractor for 60 Honey super combs or 30 nest combs diameter 1300-1Kw-230V. Stainless steel drum 1 mm thick. -florinated or satin-finished stainless steel finish(subject to availability). Full discharge, stainless steel reinforcement bands. Direct honey discharge without tap. 4 stainless steel legs. Double upper bar for fixing stainless steel 'shaft bearing. Stainless steel basket- loading capacity with 60 Honey super frames or 30 nest frames D.B. 3 opening points at lid. 1.5Hp motor- housed under the drum(stainless steel motor mounts). Speed reducer applied to 'basket shaft. Electronic programming with membrane control panel. Motor lock. Safety locks at lids. Stainless steel electric square support(optional). Machine weight empty kg 175. Power supply 230V-1Kw.
€7,000.00Price
€7,000.00Price
RADIAL Extractor for 60 Honey super combs or 30 nest combs diameter 1300-1Kw-230V
€7,000.00Price
RADIAL Extractor for 60 Honey super combs or 30 nest combs diameter 1300-1Kw-230V
RADIAL Extractor for 60 Honey super combs or 30 nest combs diameter 1300-1Kw-230V
€7,000.00Price
€2.50Price
GASKET for garolla diameter 50mm for food pipe
€2.50Price
GASKET for garolla diameter 50mm for food pipe
GASKET for garolla diameter 50mm for food pipe
€2.50Price
€20.00Price
GEARS for table-top plastic extractors round series diameter 370 mmSmelters (Code QI S29I and QI S29)
€20.00Price
GEARS for table-top plastic extractors round series diameter 370 mmSmelters (Code QI S29I and QI S29)
GEARS for table-top plastic extractors round series diameter 370 mmSmelters (Code QI S29I and QI S29)
€20.00Price
€90.00Price
15 L graduated stainless steel under-mixer bucket - stainless handle
€90.00Price
15 L graduated stainless steel under-mixer bucket - stainless handle
15 L graduated stainless steel under-mixer bucket - stainless handle
€90.00Price
Prefilter for honey made of perforated stainless steel sheet , with handles for lifting Movable bulkheads with stainless steel filter with variable diameter Water level/water drain Connection for "garolla" pump diameter 50 mm complete with: gasket-grid- hose holder Sump for honey suction at the bottom Control panel with : on/off- thermostat- LCD thermometer Completely made of stainless steel, TIG welded Stainless steel heating element 1550 W
€2,200.00Price
Prefilter for honey made of perforated stainless steel sheet , with handles for lifting Movable bulkheads with stainless steel filter with variable diameter Water level/water drain Connection for "garolla" pump diameter 50 mm complete with: gasket-grid- hose holder Sump for honey suction at the bottom Control panel with : on/off- thermostat- LCD thermometer Completely made of stainless steel, TIG welded Stainless steel heating element 1550 W
€2,200.00Price
€2,200.00Price
HONEY DECANTERING AND FILTERING TANK TOTALLY HEATED WITH WATER - double wall -127x50x26.5 cm - 230V/1500W - OPTIONAL (not included) Prefilter for operculums (Code QI F57)
€2,200.00Price
HONEY DECANTERING AND FILTERING TANK TOTALLY HEATED WITH WATER - double wall -127x50x26.5 cm - 230V/1500W - OPTIONAL (not included) Prefilter for operculums (Code QI F57)
HONEY DECANTERING AND FILTERING TANK TOTALLY HEATED WITH WATER - double wall -127x50x26.5 cm - 230V/1500W - OPTIONAL (not included) Prefilter for operculums (Code QI F57)
€2,200.00Price
€390.00Price
D.B.MANUAL TANGENTIAL Extractor for 3 honeycomb D.B. nest or 6 Honey super combs-with stainless steel basket Diam. 525 mm (Code QI C42) - Nylon cut-off tap Diam. 40 mm
€390.00Price
D.B.MANUAL TANGENTIAL Extractor for 3 honeycomb D.B. nest or 6 Honey super combs-with stainless steel basket Diam. 525 mm (Code QI C42) - Nylon cut-off tap Diam. 40 mm
D.B.MANUAL TANGENTIAL Extractor for 3 honeycomb D.B. nest or 6 Honey super combs-with stainless steel basket Diam. 525 mm (Code QI C42) - Nylon cut-off tap Diam. 40 mm
€390.00Price
EXTRACTORS "KIT" Free wheel transmission and brake Transparent polycarbonate lids attached with hinges Transmission holder crossbar and lids, stainless steel Castle in stainless steel or nylon with fiberglass Thrust bearing for shaft in BRONZE Domed bottom with semi-total discharge Stainless steel full-diameter filter Stainless steel tie( art. QI S51-52-S109-S110-S111-S117-S123) Stainless steel 60 Kg maturer with tap art. QI R11-stainless steel handles Stainless steel hardware
€425.00Price
EXTRACTORS "KIT" Free wheel transmission and brake Transparent polycarbonate lids attached with hinges Transmission holder crossbar and lids, stainless steel Castle in stainless steel or nylon with fiberglass Thrust bearing for shaft in BRONZE Domed bottom with semi-total discharge Stainless steel full-diameter filter Stainless steel tie( art. QI S51-52-S109-S110-S111-S117-S123) Stainless steel 60 Kg maturer with tap art. QI R11-stainless steel handles Stainless steel hardware
€425.00Price
€425.00Price
LANGSTROTH TANGENTIAL Extractor kit for 3 honeycombs LANGSTROTH stainless steel basket (Code QI C41)- full-diameter stainless steel filter 60 kg maturer, with stainless handles - diameter 370 mm
€425.00Price
LANGSTROTH TANGENTIAL Extractor kit for 3 honeycombs LANGSTROTH stainless steel basket (Code QI C41)- full-diameter stainless steel filter 60 kg maturer, with stainless handles - diameter 370 mm
LANGSTROTH TANGENTIAL Extractor kit for 3 honeycombs LANGSTROTH stainless steel basket (Code QI C41)- full-diameter stainless steel filter 60 kg maturer, with stainless handles - diameter 370 mm
€425.00Price
Optional variable speed motorization : - ELOBA MOTOR + 510,00€ (QI S86) or - ELECTRONIC REGISTRATION MOTOR + 475,00€(QI S122) SERIES 2008 IS A NEW SERIES OF PLANTS DESIGNED FOR "SINGLE-BLOCK" HONEY EXTRACTION. In one machine, you have everything you need in a honey extraction room, uncapping ,operculum treatment , accumulation of uncapped combs , honey extraction and honey decanting. The most obvious advantages are: smaller footprint, convenience in processing steps, with higher yield and reduction of 'inevitable dripping of honey on the floor. The 2008 series is produced in different versions from the hobbyist beekeeper to the professional.
€965.00Price
Optional variable speed motorization : - ELOBA MOTOR + 510,00€ (QI S86) or - ELECTRONIC REGISTRATION MOTOR + 475,00€(QI S122) SERIES 2008 IS A NEW SERIES OF PLANTS DESIGNED FOR "SINGLE-BLOCK" HONEY EXTRACTION. In one machine, you have everything you need in a honey extraction room, uncapping ,operculum treatment , accumulation of uncapped combs , honey extraction and honey decanting. The most obvious advantages are: smaller footprint, convenience in processing steps, with higher yield and reduction of 'inevitable dripping of honey on the floor. The 2008 series is produced in different versions from the hobbyist beekeeper to the professional.
€965.00Price
€965.00Price
Tangential 2008 series Extractor with stainless steel basket for 4 honeycombs LANGSTROTH -with manual transmission -Nylon cutting spout diameter 40 mm Dim.[mm] : Length: 1250 x Width 600 x Height 800 (+ Removable and height adjustable legs)
€965.00Price
Tangential 2008 series Extractor with stainless steel basket for 4 honeycombs LANGSTROTH -with manual transmission -Nylon cutting spout diameter 40 mm Dim.[mm] : Length: 1250 x Width 600 x Height 800 (+ Removable and height adjustable legs)
Tangential 2008 series Extractor with stainless steel basket for 4 honeycombs LANGSTROTH -with manual transmission -Nylon cutting spout diameter 40 mm Dim.[mm] : Length: 1250 x Width 600 x Height 800 (+ Removable and height adjustable legs)
€965.00Price
- -8%
€207.00Regular price-8%€225.00Price
Wax or WINE TROLLEY - Ø 20 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High-strength steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents. Dimensions : Cage 20 x 35 cm - capacity 11 L Screw diameter 28 mm Weight 18 Kg MADE IN ITALY
- -8%
€207.00Regular price-8%€225.00Price
Wax or WINE TROLLEY - Ø 20 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High-strength steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents. Dimensions : Cage 20 x 35 cm - capacity 11 L Screw diameter 28 mm Weight 18 Kg MADE IN ITALY
- -8%
Wax or WINE TROLLEY - Ø 20 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High-strength steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents. Dimensions : Cage 20 x 35 cm - capacity 11 L Screw diameter 28 mm Weight 18 Kg MADE IN ITALY
€207.00Regular price-8%€225.00Price
€2,170.00Price
Stainless steel double-chamber BOILER (not insulated) 50 L Alim.: 230V-1500W Drain with brass tap 40 mm Thermostat 0-120° Inner diameter 380 mm Outer diameter 440 mm Height 680 mm
€2,170.00Price
Stainless steel double-chamber BOILER (not insulated) 50 L Alim.: 230V-1500W Drain with brass tap 40 mm Thermostat 0-120° Inner diameter 380 mm Outer diameter 440 mm Height 680 mm
Stainless steel double-chamber BOILER (not insulated) 50 L Alim.: 230V-1500W Drain with brass tap 40 mm Thermostat 0-120° Inner diameter 380 mm Outer diameter 440 mm Height 680 mm
€2,170.00Price
€1,320.00Price
STAINLESS STEAM SCREWER for 32 Dadant B. brood frames or 40 Langstroth frames 2 Stainless steel baskets dimensions: 93 x 65 x h 80 cm Stove not included (Code QI F21)
€1,320.00Price
STAINLESS STEAM SCREWER for 32 Dadant B. brood frames or 40 Langstroth frames 2 Stainless steel baskets dimensions: 93 x 65 x h 80 cm Stove not included (Code QI F21)
STAINLESS STEAM SCREWER for 32 Dadant B. brood frames or 40 Langstroth frames 2 Stainless steel baskets dimensions: 93 x 65 x h 80 cm Stove not included (Code QI F21)
€1,320.00Price
€8.80Price
D.B.Beehive plastic nest POCKET NURIER- Size 47 x 30 cm- Capacity 2.6 L- With reinforcing angles at the support wings- 11 REINFORCEMENT SCREWS- Anti-drowning net- Knurled anti-slip walls
€8.80Price
D.B.Beehive plastic nest POCKET NURIER- Size 47 x 30 cm- Capacity 2.6 L- With reinforcing angles at the support wings- 11 REINFORCEMENT SCREWS- Anti-drowning net- Knurled anti-slip walls
D.B.Beehive plastic nest POCKET NURIER- Size 47 x 30 cm- Capacity 2.6 L- With reinforcing angles at the support wings- 11 REINFORCEMENT SCREWS- Anti-drowning net- Knurled anti-slip walls
€8.80Price
€1.20Price
Transparent replacement LID for 1-liter feeder (Code QI N01)
€1.20Price
Transparent replacement LID for 1-liter feeder (Code QI N01)
Transparent replacement LID for 1-liter feeder (Code QI N01)
€1.20Price
2-way Bee escape mounted on wooden board 50cm x 50cm
€13.50Price
2-way Bee escape mounted on wooden board 50cm x 50cm
€13.50Price
€13.50Price
Bee escape on a wooden board 50 cm x 50 cm for Dadant Blatt 12-frame Beehives With ascending valve OPTIONS : - RUND 2-WAY PLASTIC BEE ESCAPE (Code FO 2121) - RUND 2-WAY METAL BEE ESCAPE (Code LA 2100)
€13.50Price
Bee escape on a wooden board 50 cm x 50 cm for Dadant Blatt 12-frame Beehives With ascending valve OPTIONS : - RUND 2-WAY PLASTIC BEE ESCAPE (Code FO 2121) - RUND 2-WAY METAL BEE ESCAPE (Code LA 2100)
Bee escape on a wooden board 50 cm x 50 cm for Dadant Blatt 12-frame Beehives With ascending valve OPTIONS : - RUND 2-WAY PLASTIC BEE ESCAPE (Code FO 2121) - RUND 2-WAY METAL BEE ESCAPE (Code LA 2100)
€13.50Price
TECHNICAL DATAMaterial of the vat: Food-grade stainless steel Aisi 304Welding: TIG system (to comply with the guarantees required for steel containers in contact with food)Maturator diameter: Ø 310 mmHeight: 500 mmCapacity: 50 kgRubricator: Ø 40 mm diameter in food-grade plastic Lid: Stainless steel INFORMATIONThe stainless steel maturer is the ideal product for decanting and maturing honey, an indispensable process after honey extraction because it allows impurities to be brought to the surface.Honey ripening occurs due to the different specific weight of the impurities inside the honey after extracting the honey: impurities such as wax, parts of wood or organic materials will come to the surface naturally, as will the air bubbles that were generated during the previous extracting process.The ripener is designed and manufactured inside the Lega factory, so it is Made in Italy and most importantly Made in Lega.The product can be placed on top of the metal stand, which is sold separately (item 6001).We produce different sizes of steel ripeners, to meet the needs of all beekeepers. The 50-kg format is the smallest, but has all the quality of materials and workmanship Lega. The ripener is compatible with Lega's stainless steel mesh filters to do the initial filtering of honey after honey extraction. This makes it possible to pour honey from which the coarsest impurities, such as pieces of wax, wood or organic bee parts, have already been removed. It is possible to purchase the ripener stand, so that the ripener can be raised off the ground and honey can be poured into jars or tin via the tap.
€118.00Price
TECHNICAL DATAMaterial of the vat: Food-grade stainless steel Aisi 304Welding: TIG system (to comply with the guarantees required for steel containers in contact with food)Maturator diameter: Ø 310 mmHeight: 500 mmCapacity: 50 kgRubricator: Ø 40 mm diameter in food-grade plastic Lid: Stainless steel INFORMATIONThe stainless steel maturer is the ideal product for decanting and maturing honey, an indispensable process after honey extraction because it allows impurities to be brought to the surface.Honey ripening occurs due to the different specific weight of the impurities inside the honey after extracting the honey: impurities such as wax, parts of wood or organic materials will come to the surface naturally, as will the air bubbles that were generated during the previous extracting process.The ripener is designed and manufactured inside the Lega factory, so it is Made in Italy and most importantly Made in Lega.The product can be placed on top of the metal stand, which is sold separately (item 6001).We produce different sizes of steel ripeners, to meet the needs of all beekeepers. The 50-kg format is the smallest, but has all the quality of materials and workmanship Lega. The ripener is compatible with Lega's stainless steel mesh filters to do the initial filtering of honey after honey extraction. This makes it possible to pour honey from which the coarsest impurities, such as pieces of wax, wood or organic bee parts, have already been removed. It is possible to purchase the ripener stand, so that the ripener can be raised off the ground and honey can be poured into jars or tin via the tap.
€118.00Price
€118.00Price
Maturator made entirely of Aisi 304 Food-grade Stainless Steel, with a capacity of 50 kg of honey, with lid and spigot.The solid structure and great quality in the manufacture of Lega maturers mean that they are incredibly durable, remaining unchanged over the years, even with intensive use.The red stand is not included in the price and is sold separately (item 6001).
€118.00Price
Maturator made entirely of Aisi 304 Food-grade Stainless Steel, with a capacity of 50 kg of honey, with lid and spigot.The solid structure and great quality in the manufacture of Lega maturers mean that they are incredibly durable, remaining unchanged over the years, even with intensive use.The red stand is not included in the price and is sold separately (item 6001).
Maturator made entirely of Aisi 304 Food-grade Stainless Steel, with a capacity of 50 kg of honey, with lid and spigot.The solid structure and great quality in the manufacture of Lega maturers mean that they are incredibly durable, remaining unchanged over the years, even with intensive use.The red stand is not included in the price and is sold separately (item 6001).
€118.00Price
Beehives D.B. 12 honeycomb painted only standard nest with movable anti-moth net bottom . Nest; honeycomb cover with 4-position disk mounted; 10-cm-high galvanized sheet metal cover lined with wood and faestile on bottom; canopy the galvanized sheet metal; plastic transport mask; galvanized pinwheels; metal door; 3 connection corners; spacers mounted in the nest movable anti-varroa mesh bottom with galvanized sheet metal tray removable from the back; 25-mm-thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest; spring hook with screws for fixing movable bottom
€105.00Price
Beehives D.B. 12 honeycomb painted only standard nest with movable anti-moth net bottom . Nest; honeycomb cover with 4-position disk mounted; 10-cm-high galvanized sheet metal cover lined with wood and faestile on bottom; canopy the galvanized sheet metal; plastic transport mask; galvanized pinwheels; metal door; 3 connection corners; spacers mounted in the nest movable anti-varroa mesh bottom with galvanized sheet metal tray removable from the back; 25-mm-thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest; spring hook with screws for fixing movable bottom
€105.00Price
€105.00Price
Beehives Beehives Dadant Blatt 12-frame standard nest only, with movable anti-varroa net bottom (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€105.00Price
Beehives Beehives Dadant Blatt 12-frame standard nest only, with movable anti-varroa net bottom (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehives Beehives Dadant Blatt 12-frame standard nest only, with movable anti-varroa net bottom (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€105.00Price
€9.00Price
Scraper lever made of yellow-painted stainless steel for beekeeping.
Length 19 cm
With a broad chisel on one side and a scraper on the other.
€9.00Price
Scraper lever made of yellow-painted stainless steel for beekeeping.
Length 19 cm
With a broad chisel on one side and a scraper on the other.
Scraper lever made of yellow-painted stainless steel for beekeeping.
Length 19 cm
With a broad chisel on one side and a scraper on the other.
€9.00Price
- New
€3.80Price
Bee Fondant CANDIED FOR BEES (Complementary Feed) - Single 2kg Package
A paste-like product for feeding bees. It is made according to a unique recipe, including sugar and our own inverted sugar syrup. The product does not contain other syrups that could burden the bees' digestive systems.
Thanks to its hygroscopic properties, the inverted sugar syrup contained in this product makes it easier for bees to consume food. The paste is served in early spring to supplement nutritional deficiencies and stimulate bees before the harvest season, as well as for summer feeding during flower-free periods.
- New
€3.80Price
Bee Fondant CANDIED FOR BEES (Complementary Feed) - Single 2kg Package
A paste-like product for feeding bees. It is made according to a unique recipe, including sugar and our own inverted sugar syrup. The product does not contain other syrups that could burden the bees' digestive systems.
Thanks to its hygroscopic properties, the inverted sugar syrup contained in this product makes it easier for bees to consume food. The paste is served in early spring to supplement nutritional deficiencies and stimulate bees before the harvest season, as well as for summer feeding during flower-free periods.
- New
Bee Fondant CANDIED FOR BEES (Complementary Feed) - Single 2kg Package
A paste-like product for feeding bees. It is made according to a unique recipe, including sugar and our own inverted sugar syrup. The product does not contain other syrups that could burden the bees' digestive systems.
Thanks to its hygroscopic properties, the inverted sugar syrup contained in this product makes it easier for bees to consume food. The paste is served in early spring to supplement nutritional deficiencies and stimulate bees before the harvest season, as well as for summer feeding during flower-free periods.
€3.80Price
€3.40Price
Styrofoam to hold 1 kg jars.
Cheap and useful for safely transporting your jars.
Dimensions: 34 × 26 × 15.5 cm
€3.40Price
Styrofoam to hold 1 kg jars.
Cheap and useful for safely transporting your jars.
Dimensions: 34 × 26 × 15.5 cm
Styrofoam to hold 1 kg jars.
Cheap and useful for safely transporting your jars.
Dimensions: 34 × 26 × 15.5 cm
€3.40Price
€5.50Price
Polystyrene pocket feeder for 6-frame d.b. hive divided into 2 (code PI 0612/DIV2)
€5.50Price
Polystyrene pocket feeder for 6-frame d.b. hive divided into 2 (code PI 0612/DIV2)
€3.80Price
Large candle with beeswax firsDiameter: 3 cmHeight: 10 cm-Weight: 41 gMADE IN ITALY
€3.80Price
Large candle with beeswax firsDiameter: 3 cmHeight: 10 cm-Weight: 41 gMADE IN ITALY
Large candle with beeswax firsDiameter: 3 cmHeight: 10 cm-Weight: 41 gMADE IN ITALY
€3.80Price
€1.80Price
R11/R05OR faucet gaskets in silicone alimentediameter 48 mm
R11/R05OR faucet gaskets in silicone alimentediameter 48 mm
€1.80Price
€2.80Price
Pigments for soaps size 10 ml colors available: BLUE - RED - GREEN - VIOLET
€2.80Price
Pigments for soaps size 10 ml colors available: BLUE - RED - GREEN - VIOLET
Pigments for soaps size 10 ml colors available: BLUE - RED - GREEN - VIOLET
€2.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€16.20Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€16.20Price
€16.20Price
Mold diameter: 45mm - wick 3mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€16.20Price
Mold diameter: 45mm - wick 3mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold diameter: 45mm - wick 3mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€16.20Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€12.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€12.50Price
€12.50Price
Mold diameter: 4.7CM - Wax weight: 0.02 kg - Silicone weight: 0.05 kgCandle height: 1.8cm - Candle diameter: 3.5 cmRecommended wick: 2 mmSilicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€12.50Price
Mold diameter: 4.7CM - Wax weight: 0.02 kg - Silicone weight: 0.05 kgCandle height: 1.8cm - Candle diameter: 3.5 cmRecommended wick: 2 mmSilicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
Mold diameter: 4.7CM - Wax weight: 0.02 kg - Silicone weight: 0.05 kgCandle height: 1.8cm - Candle diameter: 3.5 cmRecommended wick: 2 mmSilicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€12.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€55.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€55.80Price
€55.80Price
Silicone candle mold with CUBE 95mmMold height: 95 mm - Wick: 3 mm - Weight: 330 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€55.80Price
Silicone candle mold with CUBE 95mmMold height: 95 mm - Wick: 3 mm - Weight: 330 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle mold with CUBE 95mmMold height: 95 mm - Wick: 3 mm - Weight: 330 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€55.80Price
€6.00Price
Wick made of paraffin-impregnated cotton filaments - wick height 25 mm with 3x13 weave - 39 threads, The more threads the wick has, the higher the flame.15 mm diameter tin base, 100% ready to usePack of 100 piecesBurn evenly and do not make smoke. They are ideal for both hobbyists and professionals.
€6.00Price
Wick made of paraffin-impregnated cotton filaments - wick height 25 mm with 3x13 weave - 39 threads, The more threads the wick has, the higher the flame.15 mm diameter tin base, 100% ready to usePack of 100 piecesBurn evenly and do not make smoke. They are ideal for both hobbyists and professionals.
Wick made of paraffin-impregnated cotton filaments - wick height 25 mm with 3x13 weave - 39 threads, The more threads the wick has, the higher the flame.15 mm diameter tin base, 100% ready to usePack of 100 piecesBurn evenly and do not make smoke. They are ideal for both hobbyists and professionals.
€6.00Price
€0.89Price
SQUEEZER KEOP dispenser made of food-grade plastic 250 ml for 350 g of HONEY - Mouth diameter 31 mm Dispenser screw cap color BRONZE (Code BC 03 ORA) DISPENSER equipped with flip-flop screw cap with ANTI-GOATING silicone valve and safety inner lining (LINER) Italian and European made material with food certification.
€0.89Price
SQUEEZER KEOP dispenser made of food-grade plastic 250 ml for 350 g of HONEY - Mouth diameter 31 mm Dispenser screw cap color BRONZE (Code BC 03 ORA) DISPENSER equipped with flip-flop screw cap with ANTI-GOATING silicone valve and safety inner lining (LINER) Italian and European made material with food certification.
SQUEEZER KEOP dispenser made of food-grade plastic 250 ml for 350 g of HONEY - Mouth diameter 31 mm Dispenser screw cap color BRONZE (Code BC 03 ORA) DISPENSER equipped with flip-flop screw cap with ANTI-GOATING silicone valve and safety inner lining (LINER) Italian and European made material with food certification.
€0.89Price
€0.20Price
DEEP CAPSULE H14 TO 70 for 390 ml MIELE PLUS jar
AVAILABLE COLORS: GOLD - SILVER
Diameter 70 mm - H = 14 mm
BOX of 710
SUITABLE FOR HOT PASTEURIZATION PROCESSES WITH VACUUM SAFETY BUTTON
€0.20Price
DEEP CAPSULE H14 TO 70 for 390 ml MIELE PLUS jar
AVAILABLE COLORS: GOLD - SILVER
Diameter 70 mm - H = 14 mm
BOX of 710
SUITABLE FOR HOT PASTEURIZATION PROCESSES WITH VACUUM SAFETY BUTTON
DEEP CAPSULE H14 TO 70 for 390 ml MIELE PLUS jar
AVAILABLE COLORS: GOLD - SILVER
Diameter 70 mm - H = 14 mm
BOX of 710
SUITABLE FOR HOT PASTEURIZATION PROCESSES WITH VACUUM SAFETY BUTTON
€0.20Price
€69.00Price
POLYSTYRENE Beehives for 2 NUCLEES COMPLETE WITH 3 half Honey super frames each, 2 separate front and back entrances for the 2 cores, NURIER and 'LYSON' COVER - Size 30 x 30 x H 35 cmKIT consisting of:- 1 bottom with 2 aeration windows + 2 round latches for covering aeration windows, 2 interlocking bee entrances , 2 bee entrance latches, 2 aerated bee entrance latches for transport - Nest body composed of 2 separate compartments, with 6 half-honeycomb frames in wood and partition wall.- 2-compartment feeder with bee ascent and stainless steel cover sheet, rubber cover edge for reinforcement- Very thick cover sheet height 5 cm REPLACEMENT FRAMES (Code HY T0030)
€69.00Price
POLYSTYRENE Beehives for 2 NUCLEES COMPLETE WITH 3 half Honey super frames each, 2 separate front and back entrances for the 2 cores, NURIER and 'LYSON' COVER - Size 30 x 30 x H 35 cmKIT consisting of:- 1 bottom with 2 aeration windows + 2 round latches for covering aeration windows, 2 interlocking bee entrances , 2 bee entrance latches, 2 aerated bee entrance latches for transport - Nest body composed of 2 separate compartments, with 6 half-honeycomb frames in wood and partition wall.- 2-compartment feeder with bee ascent and stainless steel cover sheet, rubber cover edge for reinforcement- Very thick cover sheet height 5 cm REPLACEMENT FRAMES (Code HY T0030)
POLYSTYRENE Beehives for 2 NUCLEES COMPLETE WITH 3 half Honey super frames each, 2 separate front and back entrances for the 2 cores, NURIER and 'LYSON' COVER - Size 30 x 30 x H 35 cmKIT consisting of:- 1 bottom with 2 aeration windows + 2 round latches for covering aeration windows, 2 interlocking bee entrances , 2 bee entrance latches, 2 aerated bee entrance latches for transport - Nest body composed of 2 separate compartments, with 6 half-honeycomb frames in wood and partition wall.- 2-compartment feeder with bee ascent and stainless steel cover sheet, rubber cover edge for reinforcement- Very thick cover sheet height 5 cm REPLACEMENT FRAMES (Code HY T0030)
€69.00Price
€0.09Price
RTS-RTO TO 38 twist-off CAPSULE with FLIP (diam. 38 mm) for SAFETY UNDER VACUUM for 200 ml juice bottle EDGE with notches: height = 8 mm ADAPTED TO HOT PASTEURIZATION PROCESSES WITH SAFETY UNDER VACUUM BUTTON SEE QUANTITY DISCOUNT
€0.09Price
RTS-RTO TO 38 twist-off CAPSULE with FLIP (diam. 38 mm) for SAFETY UNDER VACUUM for 200 ml juice bottle EDGE with notches: height = 8 mm ADAPTED TO HOT PASTEURIZATION PROCESSES WITH SAFETY UNDER VACUUM BUTTON SEE QUANTITY DISCOUNT
RTS-RTO TO 38 twist-off CAPSULE with FLIP (diam. 38 mm) for SAFETY UNDER VACUUM for 200 ml juice bottle EDGE with notches: height = 8 mm ADAPTED TO HOT PASTEURIZATION PROCESSES WITH SAFETY UNDER VACUUM BUTTON SEE QUANTITY DISCOUNT
€0.09Price
€1.60Price
FLACON : 5 ml - Ø 22 mm - h 50 mm - Mouth PFP 18 LARINGEAN NEBULIZER SPRAY RECLINING LONG 5 ml - draw straw 5 cm Packaged in thermopack of 228 pieces
€1.60Price
FLACON : 5 ml - Ø 22 mm - h 50 mm - Mouth PFP 18 LARINGEAN NEBULIZER SPRAY RECLINING LONG 5 ml - draw straw 5 cm Packaged in thermopack of 228 pieces
FLACON : 5 ml - Ø 22 mm - h 50 mm - Mouth PFP 18 LARINGEAN NEBULIZER SPRAY RECLINING LONG 5 ml - draw straw 5 cm Packaged in thermopack of 228 pieces
€1.60Price
Beehives D.B. 10 frames standard painted with fixed antivarroa mesh bottom complete with: Nest; Honey super; 10 nest frames with wax foil; 9 honeycomb frames with wax goflio cover with 4-position disc mounted; 10-cm-high galvanized sheet metal lid lined with wood and faestile on the bottom; canopy the galvanized sheet metal; plastic transport mask; galvanized pinwheels; small metal door; 3 connection angles; spacers mounted in nest and Honey super; fixed anti-moth net bottom with galvanized sheet metal bottom removable from the back; seasoned fir wood, 25mm thick; walls assembled with screws; carrying handles; Frame rest
€147.00Price
Beehives D.B. 10 frames standard painted with fixed antivarroa mesh bottom complete with: Nest; Honey super; 10 nest frames with wax foil; 9 honeycomb frames with wax goflio cover with 4-position disc mounted; 10-cm-high galvanized sheet metal lid lined with wood and faestile on the bottom; canopy the galvanized sheet metal; plastic transport mask; galvanized pinwheels; small metal door; 3 connection angles; spacers mounted in nest and Honey super; fixed anti-moth net bottom with galvanized sheet metal bottom removable from the back; seasoned fir wood, 25mm thick; walls assembled with screws; carrying handles; Frame rest
€147.00Price
€147.00Price
Beehives D.B. 10-frame Standard Beehive with movable anti-varroa net bottom. Nest + Honey super + 10 nest frames mounted, drilled and strung + 9 honeycomb frames mounted, drilled and strung (without wax sheets) - Paint + Paraffin coating (FOOD PARAFFIN) Paraffin coating is done in a hot bath with immersion, the entire Beehive is paraffined inside and out, to ensure the durability of the Beehive (COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€147.00Price
Beehives D.B. 10-frame Standard Beehive with movable anti-varroa net bottom. Nest + Honey super + 10 nest frames mounted, drilled and strung + 9 honeycomb frames mounted, drilled and strung (without wax sheets) - Paint + Paraffin coating (FOOD PARAFFIN) Paraffin coating is done in a hot bath with immersion, the entire Beehive is paraffined inside and out, to ensure the durability of the Beehive (COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehives D.B. 10-frame Standard Beehive with movable anti-varroa net bottom. Nest + Honey super + 10 nest frames mounted, drilled and strung + 9 honeycomb frames mounted, drilled and strung (without wax sheets) - Paint + Paraffin coating (FOOD PARAFFIN) Paraffin coating is done in a hot bath with immersion, the entire Beehive is paraffined inside and out, to ensure the durability of the Beehive (COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€147.00Price
The wipes are impregnated with essential oils derived from plants, and the mixture used is the result of many years of research. The attractants have been selected to attract passing swarms or swarms exiting hives and thus prevent abandonment of the apiary. Method of use Tear the bag open slightly or pierce the bag producing an opening so that it can be hung in a convenient place(such as a tree),but better yet inside a decoy Beehive. Several decoy beehives can be arranged in the apiary at a maximum distance of 50 meters from the hives. Once the bag is opened,the wipe with the attractants is effective for about 10 days,depending on environmental conditions(if hot the substance is dissipated more quickly). The optimal height of placing the bag is 1.8 to 2 meters above the ground. When used in a decoy Beehive,the ideal is to fix it on an old and empty nest canvas. The ideal orientation of the decoy beehive is with the flight opening facing south.
€26.00Price
The wipes are impregnated with essential oils derived from plants, and the mixture used is the result of many years of research. The attractants have been selected to attract passing swarms or swarms exiting hives and thus prevent abandonment of the apiary. Method of use Tear the bag open slightly or pierce the bag producing an opening so that it can be hung in a convenient place(such as a tree),but better yet inside a decoy Beehive. Several decoy beehives can be arranged in the apiary at a maximum distance of 50 meters from the hives. Once the bag is opened,the wipe with the attractants is effective for about 10 days,depending on environmental conditions(if hot the substance is dissipated more quickly). The optimal height of placing the bag is 1.8 to 2 meters above the ground. When used in a decoy Beehive,the ideal is to fix it on an old and empty nest canvas. The ideal orientation of the decoy beehive is with the flight opening facing south.
€26.00Price
€26.00Price
SWARM Swarm Attractant - Box with 10 sachets containing wipes soaked in bee swarm attractant Product approved for veterinary use, store in refrigerator
€26.00Price
SWARM Swarm Attractant - Box with 10 sachets containing wipes soaked in bee swarm attractant Product approved for veterinary use, store in refrigerator
SWARM Swarm Attractant - Box with 10 sachets containing wipes soaked in bee swarm attractant Product approved for veterinary use, store in refrigerator
€26.00Price
- Accessories11) Honey super D.B. 6 honeycombs (Cod. QI M60)12) Front spacer (Cod. QI D32)13) Side reinforcement (Cod. QI R128)14) Polystyrene lid with mesh (Cod. QI C16)15) Wood and mesh lid (Cod. PI 38/A)16) Perforated sheet metal cover (Cod. FO 1045)17) Perforated plastic cover (Cod. ES RT)18) Sheet metal roof (Cod. FO 1042)- Porches 21) Galvanized porch center position (Cod. QI P25)22) Galvanized protective porch with slider (Cod. QI P35)23) Replacement slider protective porch (Cod. QI P36)- Feeders31) 1-hole cable cover feeder (Cod. QI N06)32) 1-hole cable cover feeder new (Cod. QI N07)33) Double compartment cable cover feeder (Cod. QI N12)34) Replacement bell (Cod. QI C97)35) Replacement Vulcanello (Cod. QI C107)- Spare parts 41) Polystyrene porch (Cod. QI P21)42) Polystyrene lid (Art. QI C16B)
€18.50Price
- Accessories11) Honey super D.B. 6 honeycombs (Cod. QI M60)12) Front spacer (Cod. QI D32)13) Side reinforcement (Cod. QI R128)14) Polystyrene lid with mesh (Cod. QI C16)15) Wood and mesh lid (Cod. PI 38/A)16) Perforated sheet metal cover (Cod. FO 1045)17) Perforated plastic cover (Cod. ES RT)18) Sheet metal roof (Cod. FO 1042)- Porches 21) Galvanized porch center position (Cod. QI P25)22) Galvanized protective porch with slider (Cod. QI P35)23) Replacement slider protective porch (Cod. QI P36)- Feeders31) 1-hole cable cover feeder (Cod. QI N06)32) 1-hole cable cover feeder new (Cod. QI N07)33) Double compartment cable cover feeder (Cod. QI N12)34) Replacement bell (Cod. QI C97)35) Replacement Vulcanello (Cod. QI C107)- Spare parts 41) Polystyrene porch (Cod. QI P21)42) Polystyrene lid (Art. QI C16B)
€18.50Price
€18.50Price
D.B. 6-FAVES Beehives made of high-density polystyrene (80)Total mesh at the bottom fixed 184x375 mmAntivarroa Double opening front and back Anti-frame movement spacers at the bottomBeehive colors light blue/pastel green depending on availabilityPolystyrene closing lidNucleus hive support feet placed on the side with full lengthExterior measurements 275 x 495 mm - Spare parts:41) Polystyrene hatch (Art. QI P21)42) Polystyrene lid (Art. QI C16B) SEE accessories below
€18.50Price
D.B. 6-FAVES Beehives made of high-density polystyrene (80)Total mesh at the bottom fixed 184x375 mmAntivarroa Double opening front and back Anti-frame movement spacers at the bottomBeehive colors light blue/pastel green depending on availabilityPolystyrene closing lidNucleus hive support feet placed on the side with full lengthExterior measurements 275 x 495 mm - Spare parts:41) Polystyrene hatch (Art. QI P21)42) Polystyrene lid (Art. QI C16B) SEE accessories below
D.B. 6-FAVES Beehives made of high-density polystyrene (80)Total mesh at the bottom fixed 184x375 mmAntivarroa Double opening front and back Anti-frame movement spacers at the bottomBeehive colors light blue/pastel green depending on availabilityPolystyrene closing lidNucleus hive support feet placed on the side with full lengthExterior measurements 275 x 495 mm - Spare parts:41) Polystyrene hatch (Art. QI P21)42) Polystyrene lid (Art. QI C16B) SEE accessories below
€18.50Price
USE DOSAGE: Dilute 20 ml of product in 500 ml of sugar syrup. Mix well before inserting into the Beehive by means of the feeder. Repeat feeding at least 3 times weekly during the spring and autumn periods with average seasonal temperatures above 12°C.
€95.00Price
USE DOSAGE: Dilute 20 ml of product in 500 ml of sugar syrup. Mix well before inserting into the Beehive by means of the feeder. Repeat feeding at least 3 times weekly during the spring and autumn periods with average seasonal temperatures above 12°C.
€95.00Price
€95.00Price
COMPOSITION: 5% essential oil of savory, 20% polysorbate 20 (Sorbitan monolaurate) Complementary feed for bees based on essential oil of savory (Satureya hortensis) in an aqueous solution to be added to normal liquid sugar feed as nutritional support to weakened Beehives exhibiting the phenomenon of calcified brood. (see in the ALLEGED DOCUMENTS section)
€95.00Price
COMPOSITION: 5% essential oil of savory, 20% polysorbate 20 (Sorbitan monolaurate) Complementary feed for bees based on essential oil of savory (Satureya hortensis) in an aqueous solution to be added to normal liquid sugar feed as nutritional support to weakened Beehives exhibiting the phenomenon of calcified brood. (see in the ALLEGED DOCUMENTS section)
COMPOSITION: 5% essential oil of savory, 20% polysorbate 20 (Sorbitan monolaurate) Complementary feed for bees based on essential oil of savory (Satureya hortensis) in an aqueous solution to be added to normal liquid sugar feed as nutritional support to weakened Beehives exhibiting the phenomenon of calcified brood. (see in the ALLEGED DOCUMENTS section)
€95.00Price
€9.50Price
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€9.50Price
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€9.50Price
BEEHIVES D.B. 8 FAVI only STANDARD nest with fixed anti-varroa net bottom Nest-cover with 4-position disk mounted- galvanized sheet metal cover 10 cm high-wood-lined and faestile on the bottom- canopy the galvanized sheet metal-.plastic transport template-girandole galvanized-metal door-3 angles from connection-spacers mounted in the nest-mobile antivarroa net bottom with removable galvanized sheet metal bottom from the back-woods made of seasoned fir, thickness 25mm-walls assembled with screws - Handles for transport - Frame rest Painted
€98.00Price
BEEHIVES D.B. 8 FAVI only STANDARD nest with fixed anti-varroa net bottom Nest-cover with 4-position disk mounted- galvanized sheet metal cover 10 cm high-wood-lined and faestile on the bottom- canopy the galvanized sheet metal-.plastic transport template-girandole galvanized-metal door-3 angles from connection-spacers mounted in the nest-mobile antivarroa net bottom with removable galvanized sheet metal bottom from the back-woods made of seasoned fir, thickness 25mm-walls assembled with screws - Handles for transport - Frame rest Painted
€98.00Price
€98.00Price
Beehives D.B. 8 BEEHIVES only STANDARD nest with fixed anti-varroa net bottom - WITH FRAMES WITH THREAD (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€98.00Price
Beehives D.B. 8 BEEHIVES only STANDARD nest with fixed anti-varroa net bottom - WITH FRAMES WITH THREAD (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehives D.B. 8 BEEHIVES only STANDARD nest with fixed anti-varroa net bottom - WITH FRAMES WITH THREAD (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€98.00Price
€9.50Price
Wooden stand for formic acid bottles. Compatible with the frame dispensers "ASPRO NOVAR FORM" DIFFUSER for FORMATIC ACID. (Stand only - Bottles not included)
€9.50Price
Wooden stand for formic acid bottles. Compatible with the frame dispensers "ASPRO NOVAR FORM" DIFFUSER for FORMATIC ACID. (Stand only - Bottles not included)
Wooden stand for formic acid bottles. Compatible with the frame dispensers "ASPRO NOVAR FORM" DIFFUSER for FORMATIC ACID. (Stand only - Bottles not included)
€9.50Price
Honey super wax sheet size Dadant B. obtained by melting of PURE OPERATING Wax - 50 g per sheet approx.
€82.00Price
Honey super wax sheet size Dadant B. obtained by melting of PURE OPERATING Wax - 50 g per sheet approx.
€82.00Price
- Sale
€82.00Price
Honey super Dadant B. wax sheets obtained by casting PURE OPERATION - 50 g per sheet - Boxed 5 Kg - 100 sheets approx. Size: sheet 41 x 12.7 cm PROVENANCE : ITALY
- Sale
€82.00Price
Honey super Dadant B. wax sheets obtained by casting PURE OPERATION - 50 g per sheet - Boxed 5 Kg - 100 sheets approx. Size: sheet 41 x 12.7 cm PROVENANCE : ITALY
- Sale
Honey super Dadant B. wax sheets obtained by casting PURE OPERATION - 50 g per sheet - Boxed 5 Kg - 100 sheets approx. Size: sheet 41 x 12.7 cm PROVENANCE : ITALY
€82.00Price
€5.50Price
STAINLESS STEEL BOTTOM SPACER for 10- or 12-frame D.B. hivesIt is attached to the bottom of the hive underneath the nest combs to prevent them from swinging when moving the hive or nomadizingOPTIONS: Beehives 10-frame with 10 notches - Size: 383 x 10 x 36 mm Beehives 12-frame with 12 notches - Size: 447 x 12 x 36 mm
€5.50Price
STAINLESS STEEL BOTTOM SPACER for 10- or 12-frame D.B. hivesIt is attached to the bottom of the hive underneath the nest combs to prevent them from swinging when moving the hive or nomadizingOPTIONS: Beehives 10-frame with 10 notches - Size: 383 x 10 x 36 mm Beehives 12-frame with 12 notches - Size: 447 x 12 x 36 mm
STAINLESS STEEL BOTTOM SPACER for 10- or 12-frame D.B. hivesIt is attached to the bottom of the hive underneath the nest combs to prevent them from swinging when moving the hive or nomadizingOPTIONS: Beehives 10-frame with 10 notches - Size: 383 x 10 x 36 mm Beehives 12-frame with 12 notches - Size: 447 x 12 x 36 mm
€5.50Price
D.B. Standard 7-frame Beehives made of 25 mm thick wood, with 7 wire frames, complete with high wire cover with 4-position disc, electro-welded galvanized sheet metal roof, anti-moth net bottom, galvanized sheet metal tray, transport template, handles, corners, metal door. Painted with environmentally friendly water-based paint.
€92.00Price
D.B. Standard 7-frame Beehives made of 25 mm thick wood, with 7 wire frames, complete with high wire cover with 4-position disc, electro-welded galvanized sheet metal roof, anti-moth net bottom, galvanized sheet metal tray, transport template, handles, corners, metal door. Painted with environmentally friendly water-based paint.
€92.00Price
€92.00Price
Beehives Dadant Blatt Standard 7-frame Beehives made of 25mm-thick water-varnished wood complete with 7 frames mounted, drilled and strung (no wax sheets) Made in ITALY (Pino del TRENTINO) (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€92.00Price
Beehives Dadant Blatt Standard 7-frame Beehives made of 25mm-thick water-varnished wood complete with 7 frames mounted, drilled and strung (no wax sheets) Made in ITALY (Pino del TRENTINO) (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehives Dadant Blatt Standard 7-frame Beehives made of 25mm-thick water-varnished wood complete with 7 frames mounted, drilled and strung (no wax sheets) Made in ITALY (Pino del TRENTINO) (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€92.00Price
€2.50Price
CONSTRUCTED WHITE GLASS BOTTLE WITH SPRING CAP Available in 250 ml and 500 ml sizes
€2.50Price
CONSTRUCTED WHITE GLASS BOTTLE WITH SPRING CAP Available in 250 ml and 500 ml sizes
CONSTRUCTED WHITE GLASS BOTTLE WITH SPRING CAP Available in 250 ml and 500 ml sizes
€2.50Price
€415.00Price
RADIAL D.B. MANUAL EXTRACTOR with STAINLESS STEEL basket for 12 Honey super or 3 nest combs (Basket No. QI C101) - diameter 525 mm with 40 mm Nylon CUT RUBBER For nest combs, 3 additional cages are required, not included (QI No. G06)
€415.00Price
RADIAL D.B. MANUAL EXTRACTOR with STAINLESS STEEL basket for 12 Honey super or 3 nest combs (Basket No. QI C101) - diameter 525 mm with 40 mm Nylon CUT RUBBER For nest combs, 3 additional cages are required, not included (QI No. G06)
RADIAL D.B. MANUAL EXTRACTOR with STAINLESS STEEL basket for 12 Honey super or 3 nest combs (Basket No. QI C101) - diameter 525 mm with 40 mm Nylon CUT RUBBER For nest combs, 3 additional cages are required, not included (QI No. G06)
€415.00Price
€110.00Price
Table-top uncapping bench, with 600x400x180 mm plastic tank, drip tray and stainless steel frame-holder lectern.OPTIONS:- Without tap - With tapIn option to add stainless steel cover (Code FO 2173)
€110.00Price
Table-top uncapping bench, with 600x400x180 mm plastic tank, drip tray and stainless steel frame-holder lectern.OPTIONS:- Without tap - With tapIn option to add stainless steel cover (Code FO 2173)
Table-top uncapping bench, with 600x400x180 mm plastic tank, drip tray and stainless steel frame-holder lectern.OPTIONS:- Without tap - With tapIn option to add stainless steel cover (Code FO 2173)
€110.00Price
€4.80Price
PLASTIC PERFORATED SHEET FOR POLLEN COLLECTION WITH ROTARY HOLES For pollen collector trap (art. QI T51L19)
€4.80Price
PLASTIC PERFORATED SHEET FOR POLLEN COLLECTION WITH ROTARY HOLES For pollen collector trap (art. QI T51L19)
PLASTIC PERFORATED SHEET FOR POLLEN COLLECTION WITH ROTARY HOLES For pollen collector trap (art. QI T51L19)
€4.80Price
€1.80Price
LOSANGE TABLE APISCAMENT for PLASTIC APISCAMENT TABLE for Beehives D.B.10 beehives (art. QI A95) and 6 beehives (art.QI A98) - WITHOUT TABLE FIXING SCREWS OPTIONS : - WITHOUT FIXING SCREWS - WITH FIXING SCREWS
€1.80Price
LOSANGE TABLE APISCAMENT for PLASTIC APISCAMENT TABLE for Beehives D.B.10 beehives (art. QI A95) and 6 beehives (art.QI A98) - WITHOUT TABLE FIXING SCREWS OPTIONS : - WITHOUT FIXING SCREWS - WITH FIXING SCREWS
LOSANGE TABLE APISCAMENT for PLASTIC APISCAMENT TABLE for Beehives D.B.10 beehives (art. QI A95) and 6 beehives (art.QI A98) - WITHOUT TABLE FIXING SCREWS OPTIONS : - WITHOUT FIXING SCREWS - WITH FIXING SCREWS
€1.80Price
€2.90Price
Round metal color orientator, to be applied to front of Beehive, helps bees recognize their own. CAN BE COMBINED WITH MAGNETIC NUMBERS COLOR CHOICE : 3 COLORS (WHITE-BLUE-YELLOW) - SINGLE COLOR: WHITE - BLUE - YELLOW Size: Diameter 9 cm
€2.90Price
Round metal color orientator, to be applied to front of Beehive, helps bees recognize their own. CAN BE COMBINED WITH MAGNETIC NUMBERS COLOR CHOICE : 3 COLORS (WHITE-BLUE-YELLOW) - SINGLE COLOR: WHITE - BLUE - YELLOW Size: Diameter 9 cm
Round metal color orientator, to be applied to front of Beehive, helps bees recognize their own. CAN BE COMBINED WITH MAGNETIC NUMBERS COLOR CHOICE : 3 COLORS (WHITE-BLUE-YELLOW) - SINGLE COLOR: WHITE - BLUE - YELLOW Size: Diameter 9 cm
€2.90Price
Dimensions: Interior 38cm x 46cm x h 16cm - Exterior 43cm x 51cm h 16cm
€18.70Price
Dimensions: Interior 38cm x 46cm x h 16cm - Exterior 43cm x 51cm h 16cm
€18.70Price
€18.70Price
Half Honey super (height 16cm) made of painted wood for 10-frame Langstroth Beehives with 9-notch spacers mounted. 25mm thick wood, frames NOT included (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€18.70Price
Half Honey super (height 16cm) made of painted wood for 10-frame Langstroth Beehives with 9-notch spacers mounted. 25mm thick wood, frames NOT included (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Half Honey super (height 16cm) made of painted wood for 10-frame Langstroth Beehives with 9-notch spacers mounted. 25mm thick wood, frames NOT included (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€18.70Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€23.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€23.00Price
€23.00Price
Mold height: 30 mm - Wick: 3 mm - Weight: 20 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€23.00Price
Mold height: 30 mm - Wick: 3 mm - Weight: 20 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 30 mm - Wick: 3 mm - Weight: 20 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€23.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€30.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€30.00Price
€30.00Price
Silicone candle mold with Beehives Straw 90 mm Mold height: 90 mm - Wick: 3 mm - Weight: 75 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€30.00Price
Silicone candle mold with Beehives Straw 90 mm Mold height: 90 mm - Wick: 3 mm - Weight: 75 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
Silicone candle mold with Beehives Straw 90 mm Mold height: 90 mm - Wick: 3 mm - Weight: 75 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€30.00Price
€210.00Price
RADIAL STAINLESS STEEL BASKET for "RADIAL 12" "ZANDER" extractor for 12 ZANDER frames - Extractor diameter 625 mm - pin hole diameter 14 mm
€210.00Price
RADIAL STAINLESS STEEL BASKET for "RADIAL 12" "ZANDER" extractor for 12 ZANDER frames - Extractor diameter 625 mm - pin hole diameter 14 mm
RADIAL STAINLESS STEEL BASKET for "RADIAL 12" "ZANDER" extractor for 12 ZANDER frames - Extractor diameter 625 mm - pin hole diameter 14 mm
€210.00Price
Helical gear drive in closed aluminum box, with automatic crank disengagement, brake, center cage pin and bar, for honey extractors with ø 520 mm (e.g., Radialnove or Radial 12).
€225.00Price
Helical gear drive in closed aluminum box, with automatic crank disengagement, brake, center cage pin and bar, for honey extractors with ø 520 mm (e.g., Radialnove or Radial 12).
€225.00Price
€225.00Price
HELICOIDAL GEAR DRIVE in an aluminum enclosed box, with automatic crank disengagement , brake, central basket shaft (14 mm diameter) and bar FOR ALLOY DRIVE with Diam.: 520 mm (Radialnove or Radial 12)
€225.00Price
HELICOIDAL GEAR DRIVE in an aluminum enclosed box, with automatic crank disengagement , brake, central basket shaft (14 mm diameter) and bar FOR ALLOY DRIVE with Diam.: 520 mm (Radialnove or Radial 12)
HELICOIDAL GEAR DRIVE in an aluminum enclosed box, with automatic crank disengagement , brake, central basket shaft (14 mm diameter) and bar FOR ALLOY DRIVE with Diam.: 520 mm (Radialnove or Radial 12)
€225.00Price
€850.00Price
ZANDER manual radial Extractor with stainless steel basket for 12 frames Zander steel helical gear transmission in closed aluminum box Ø 630 mm - 40 mm plastic shear valve - Full discharge bottom No. 3 removable painted legs and hinged transparent lid
€850.00Price
ZANDER manual radial Extractor with stainless steel basket for 12 frames Zander steel helical gear transmission in closed aluminum box Ø 630 mm - 40 mm plastic shear valve - Full discharge bottom No. 3 removable painted legs and hinged transparent lid
ZANDER manual radial Extractor with stainless steel basket for 12 frames Zander steel helical gear transmission in closed aluminum box Ø 630 mm - 40 mm plastic shear valve - Full discharge bottom No. 3 removable painted legs and hinged transparent lid
€850.00Price
It is made to cage the swarm and transport it, thus avoiding the possibility of suffocation. The side walls of the Nucleus hive are made of mesh to allow for greater aeration, while the front and back are made of wood to make it durable and long-lasting.The cover is hermetically sealed by means of two hooks in order to prevent the bees from escaping during transport.There is the option of having two polystyrene side walls that are applied, quickly and functionally, on the mesh walls in order to allow the nucleus to spend a medium/long period of time inside the hive.
€52.00Price
It is made to cage the swarm and transport it, thus avoiding the possibility of suffocation. The side walls of the Nucleus hive are made of mesh to allow for greater aeration, while the front and back are made of wood to make it durable and long-lasting.The cover is hermetically sealed by means of two hooks in order to prevent the bees from escaping during transport.There is the option of having two polystyrene side walls that are applied, quickly and functionally, on the mesh walls in order to allow the nucleus to spend a medium/long period of time inside the hive.
€52.00Price
€52.00Price
Nucleus hive D.B.from 6 honeycomb wood swarm catcher, with side walls and mesh bottom, full closure with hooks and carrying handle. Possibility of inserting polystyrene side plates (NOT INCLUDED) (Code PI501/B)
€52.00Price
Nucleus hive D.B.from 6 honeycomb wood swarm catcher, with side walls and mesh bottom, full closure with hooks and carrying handle. Possibility of inserting polystyrene side plates (NOT INCLUDED) (Code PI501/B)
Nucleus hive D.B.from 6 honeycomb wood swarm catcher, with side walls and mesh bottom, full closure with hooks and carrying handle. Possibility of inserting polystyrene side plates (NOT INCLUDED) (Code PI501/B)
€52.00Price
€570.00Price
Professional stainless steel food dryer with horizontal flow, with 12 stainless steel drawers FOR DRYING : POLLEN, FRUIT AND VEGETABLES Manual temperature adjustment or with preset programs for each type of foodAlim. 220V/50 Hz - 550W - Capacity 5/7 Kg External dimensions : 27 x 27 x length 82 cm - Weight : 12 Kg WARRANTY : 24 Months
€570.00Price
Professional stainless steel food dryer with horizontal flow, with 12 stainless steel drawers FOR DRYING : POLLEN, FRUIT AND VEGETABLES Manual temperature adjustment or with preset programs for each type of foodAlim. 220V/50 Hz - 550W - Capacity 5/7 Kg External dimensions : 27 x 27 x length 82 cm - Weight : 12 Kg WARRANTY : 24 Months
Professional stainless steel food dryer with horizontal flow, with 12 stainless steel drawers FOR DRYING : POLLEN, FRUIT AND VEGETABLES Manual temperature adjustment or with preset programs for each type of foodAlim. 220V/50 Hz - 550W - Capacity 5/7 Kg External dimensions : 27 x 27 x length 82 cm - Weight : 12 Kg WARRANTY : 24 Months
€570.00Price
The 3M 6200 reusable semi-mask respirator is easy to use, lightweight and requires minimal maintenance. Filters are supplied separately. The nape cap is designed to ensure a snug fit and to make it easy to fasten behind the neck. The soft elastomeric facepiece and light weight (82 g) provide excellent comfort even for prolonged periods of work. The compact design minimizes obstruction of the field of view and makes it easy to handle. The two-side filter attachment system provides minimal resistance to breathing.
€36.00Price
The 3M 6200 reusable semi-mask respirator is easy to use, lightweight and requires minimal maintenance. Filters are supplied separately. The nape cap is designed to ensure a snug fit and to make it easy to fasten behind the neck. The soft elastomeric facepiece and light weight (82 g) provide excellent comfort even for prolonged periods of work. The compact design minimizes obstruction of the field of view and makes it easy to handle. The two-side filter attachment system provides minimal resistance to breathing.
€36.00Price
€36.00Price
Semi-mask respirator model 6200 (medium size) for protection from organic gases and vapors (e.g., oxalic acid), reusable, made of elastomeric material, fitted with bayonet filter coupling. Pack of 1 pc without filters. (Code GS 458382) Features:Two-filter design reduces respiratory resistance Soft, lightweight face piece Economical replaceable filters 3M bayonet filter attachment system Convenient harness and easy buckle closure CE/EN 140 marking
€36.00Price
Semi-mask respirator model 6200 (medium size) for protection from organic gases and vapors (e.g., oxalic acid), reusable, made of elastomeric material, fitted with bayonet filter coupling. Pack of 1 pc without filters. (Code GS 458382) Features:Two-filter design reduces respiratory resistance Soft, lightweight face piece Economical replaceable filters 3M bayonet filter attachment system Convenient harness and easy buckle closure CE/EN 140 marking
Semi-mask respirator model 6200 (medium size) for protection from organic gases and vapors (e.g., oxalic acid), reusable, made of elastomeric material, fitted with bayonet filter coupling. Pack of 1 pc without filters. (Code GS 458382) Features:Two-filter design reduces respiratory resistance Soft, lightweight face piece Economical replaceable filters 3M bayonet filter attachment system Convenient harness and easy buckle closure CE/EN 140 marking
€36.00Price
€3.00Price
SELF-ADHESIVE LABEL - GUARANTEE SEAL - ITALIAN HONEY - CONF. OF 100 PIECES For all honey jars DIM: 80 x 20 mm
€3.00Price
SELF-ADHESIVE LABEL - GUARANTEE SEAL - ITALIAN HONEY - CONF. OF 100 PIECES For all honey jars DIM: 80 x 20 mm
SELF-ADHESIVE LABEL - GUARANTEE SEAL - ITALIAN HONEY - CONF. OF 100 PIECES For all honey jars DIM: 80 x 20 mm
€3.00Price
€18.00Price
Photographic POSTER "The Forager Bee," made of plasticized cardboard, printed in color, complete with metal stick with hanger. Size: 60 x 90 cm
€18.00Price
Photographic POSTER "The Forager Bee," made of plasticized cardboard, printed in color, complete with metal stick with hanger. Size: 60 x 90 cm
Photographic POSTER "The Forager Bee," made of plasticized cardboard, printed in color, complete with metal stick with hanger. Size: 60 x 90 cm
€18.00Price
€2.60Price
Self-adhesive 'Happy Bee' label made of clear plastic, screen printed in three colors Size: 15x19 cm
€2.60Price
Self-adhesive 'Happy Bee' label made of clear plastic, screen printed in three colors Size: 15x19 cm
Self-adhesive 'Happy Bee' label made of clear plastic, screen printed in three colors Size: 15x19 cm
€2.60Price
€1.40Price
NO.1 ONE THIRD HONEY super D.B. BRACKET with thread (HOFFMAN) 3 ONE THIRD HONEY super BRACKET FORMATS A DADANT B. FROM HONEY super Dimensions: L=14.5 cm H=16 cm- Hoffman side 37 mm Price is for one mini-frame
€1.40Price
NO.1 ONE THIRD HONEY super D.B. BRACKET with thread (HOFFMAN) 3 ONE THIRD HONEY super BRACKET FORMATS A DADANT B. FROM HONEY super Dimensions: L=14.5 cm H=16 cm- Hoffman side 37 mm Price is for one mini-frame
NO.1 ONE THIRD HONEY super D.B. BRACKET with thread (HOFFMAN) 3 ONE THIRD HONEY super BRACKET FORMATS A DADANT B. FROM HONEY super Dimensions: L=14.5 cm H=16 cm- Hoffman side 37 mm Price is for one mini-frame
€1.40Price
€4.50Price
Cup holder splint Stainless steel splint with slot for inserting plastic cupolas Possibility of inserting 35 cupolas (not included) Its special shape, allows it to hold the cupola without the use of supports.The cupola can be fixed with wax for greater stability (TO BE MOUNTED ON THE CUP MOUNTING FRAME Cod. QI T09)
€4.50Price
Cup holder splint Stainless steel splint with slot for inserting plastic cupolas Possibility of inserting 35 cupolas (not included) Its special shape, allows it to hold the cupola without the use of supports.The cupola can be fixed with wax for greater stability (TO BE MOUNTED ON THE CUP MOUNTING FRAME Cod. QI T09)
Cup holder splint Stainless steel splint with slot for inserting plastic cupolas Possibility of inserting 35 cupolas (not included) Its special shape, allows it to hold the cupola without the use of supports.The cupola can be fixed with wax for greater stability (TO BE MOUNTED ON THE CUP MOUNTING FRAME Cod. QI T09)
€4.50Price
€1.20Price
MOUNTED NEST FRAME without holes for Beehives D.B.-To insert polystyrene diaphragmOPTIONS : Thickness of sleepers 2 cm - Polystyrene diaphragm (Code PI 501) Thickness of sleepers 3 cm - Polystyrene diaphragm (Code PI 501/A)Inner frame light 412 x 259 mm
€1.20Price
MOUNTED NEST FRAME without holes for Beehives D.B.-To insert polystyrene diaphragmOPTIONS : Thickness of sleepers 2 cm - Polystyrene diaphragm (Code PI 501) Thickness of sleepers 3 cm - Polystyrene diaphragm (Code PI 501/A)Inner frame light 412 x 259 mm
MOUNTED NEST FRAME without holes for Beehives D.B.-To insert polystyrene diaphragmOPTIONS : Thickness of sleepers 2 cm - Polystyrene diaphragm (Code PI 501) Thickness of sleepers 3 cm - Polystyrene diaphragm (Code PI 501/A)Inner frame light 412 x 259 mm
€1.20Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€46.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€46.00Price
€46.00Price
Silicone candle mold with smooth domed thin cylinder Mold height: 135 mm - Diameter: 65 mm - Wick: 3 - Weight: 375 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€46.00Price
Silicone candle mold with smooth domed thin cylinder Mold height: 135 mm - Diameter: 65 mm - Wick: 3 - Weight: 375 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle mold with smooth domed thin cylinder Mold height: 135 mm - Diameter: 65 mm - Wick: 3 - Weight: 375 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€46.00Price
€2.50Price
Durable plastic IMBUTE for pouring feeding liquid into POCKET NUTRIERS Size: Length 20 cm - Height 8.5 cm - Width 6 cm The 6 cm thickness, allows it to be stored in the Beehive's cable cover
€2.50Price
Durable plastic IMBUTE for pouring feeding liquid into POCKET NUTRIERS Size: Length 20 cm - Height 8.5 cm - Width 6 cm The 6 cm thickness, allows it to be stored in the Beehive's cable cover
Durable plastic IMBUTE for pouring feeding liquid into POCKET NUTRIERS Size: Length 20 cm - Height 8.5 cm - Width 6 cm The 6 cm thickness, allows it to be stored in the Beehive's cable cover
€2.50Price
€18.00Price
Full-diameter NYLON FILTER for maturers from 25/50 Kg - With lanyard for attachment on maturer - DIAMETER 31 cm 300 Micron mesh - To be combined with the full-diameter mesh filter for maturers from 25-50 Kg (Cod. QI F48)
€18.00Price
Full-diameter NYLON FILTER for maturers from 25/50 Kg - With lanyard for attachment on maturer - DIAMETER 31 cm 300 Micron mesh - To be combined with the full-diameter mesh filter for maturers from 25-50 Kg (Cod. QI F48)
Full-diameter NYLON FILTER for maturers from 25/50 Kg - With lanyard for attachment on maturer - DIAMETER 31 cm 300 Micron mesh - To be combined with the full-diameter mesh filter for maturers from 25-50 Kg (Cod. QI F48)
€18.00Price
Varroa i fights them more effectively by zeroing out the winter brood. From this observation comes the Menna cage, designed and patented by Vincenzo Menna: a practical device that promotes the queen's rest in the colder months, and that brings all the varroa present in the Beehive more easily out into the open. The period of use varies from northern to southern Italy, but indicatively the first days of November will be the most suitable to start caging, and mid to late January those for caging. Considering that a regular family goes into production in 60 to 70 days from the release of the queen, it will be up to the beekeeper to adjust the period.
€13.00Price
Varroa i fights them more effectively by zeroing out the winter brood. From this observation comes the Menna cage, designed and patented by Vincenzo Menna: a practical device that promotes the queen's rest in the colder months, and that brings all the varroa present in the Beehive more easily out into the open. The period of use varies from northern to southern Italy, but indicatively the first days of November will be the most suitable to start caging, and mid to late January those for caging. Considering that a regular family goes into production in 60 to 70 days from the release of the queen, it will be up to the beekeeper to adjust the period.
€13.00Price
€13.00Price
Practical plastic cage for queen caging Size: 47.5 x 26.5 cm You open the colored side cap and insert the queen. There are three openings in the device that will facilitate the queen's exit when deciding to cage. Reacceptance by the family will occur naturally, and the resumption of laying will be immediate and quick in quantity. RED REPLACEMENT CAP (Code ME TA) (SEE ANNEX)
€13.00Price
Practical plastic cage for queen caging Size: 47.5 x 26.5 cm You open the colored side cap and insert the queen. There are three openings in the device that will facilitate the queen's exit when deciding to cage. Reacceptance by the family will occur naturally, and the resumption of laying will be immediate and quick in quantity. RED REPLACEMENT CAP (Code ME TA) (SEE ANNEX)
Practical plastic cage for queen caging Size: 47.5 x 26.5 cm You open the colored side cap and insert the queen. There are three openings in the device that will facilitate the queen's exit when deciding to cage. Reacceptance by the family will occur naturally, and the resumption of laying will be immediate and quick in quantity. RED REPLACEMENT CAP (Code ME TA) (SEE ANNEX)
€13.00Price