€4,350.00Regular price-€450.00€4,800.00Price
Special Products
Featured Products
Subcategory
RADIAL stainless steel Extractor for 45 Honey super combs or 20 nest D.B. 1mm thick stainless steel drum,tig welded double stainless steel reinforcing band, bottom with full frontal outlet drain, sleeve for Ø 50 cut tap (code QI R04I not included), SATIN FINISHED FLOWERED STAINLESS STEEL. Extractor bottom with accumulation of about 200kg honey. Upper bar for fixing stainless steel shaft bearing. Three stainless steel legs. Lids, one in transparent polycarbonate and one in stainless steel, attached with stainless steel hinges. Safety lock at lid. Stainless steel motor mounts. 1 Hp motor, housed under the drum. Speed reducer applied on de basket shaft. Electronic programmer with membrane panel. Power supply 230V-0.75Kw.
€6,050.00Price
RADIAL stainless steel Extractor for 45 Honey super combs or 20 nest D.B. 1mm thick stainless steel drum,tig welded double stainless steel reinforcing band, bottom with full frontal outlet drain, sleeve for Ø 50 cut tap (code QI R04I not included), SATIN FINISHED FLOWERED STAINLESS STEEL. Extractor bottom with accumulation of about 200kg honey. Upper bar for fixing stainless steel shaft bearing. Three stainless steel legs. Lids, one in transparent polycarbonate and one in stainless steel, attached with stainless steel hinges. Safety lock at lid. Stainless steel motor mounts. 1 Hp motor, housed under the drum. Speed reducer applied on de basket shaft. Electronic programmer with membrane panel. Power supply 230V-0.75Kw.
€6,050.00Price
€6,050.00Price
Stainless Steel RADIAL Extractor for 45 Honey super or 20 nest combs-Ø920
€6,050.00Price
Stainless Steel RADIAL Extractor for 45 Honey super or 20 nest combs-Ø920
Stainless Steel RADIAL Extractor for 45 Honey super or 20 nest combs-Ø920
€6,050.00Price
€35.00Price
STAINLESS STEEL SUPPORT FOR HONEY FOOD TUBE Ø 50 mm - to be inserted directly on the edge of the container and Maturator
€35.00Price
STAINLESS STEEL SUPPORT FOR HONEY FOOD TUBE Ø 50 mm - to be inserted directly on the edge of the container and Maturator
STAINLESS STEEL SUPPORT FOR HONEY FOOD TUBE Ø 50 mm - to be inserted directly on the edge of the container and Maturator
€35.00Price
€20.00Price
CLAMP for 50 mm/2" STAINLESS STEEL GAROLLA connection for food pipe for honey or other
€20.00Price
CLAMP for 50 mm/2" STAINLESS STEEL GAROLLA connection for food pipe for honey or other
CLAMP for 50 mm/2" STAINLESS STEEL GAROLLA connection for food pipe for honey or other
€20.00Price
€80.00Price
12 L graduated stainless steel under-mixer bucket - stainless handle
€80.00Price
12 L graduated stainless steel under-mixer bucket - stainless handle
12 L graduated stainless steel under-mixer bucket - stainless handle
€80.00Price
Optional variable speed motorization : - ELOBA MOTOR + 550,00€ (QI S86) or - MOTOR REG.ELECTRONIC + 510,00€(QI S134) Extractors "KIT" Free wheel transmission and brake Transparent polycarbonate lids fixed with hinges Transmission holder crossbar and lids, stainless steel Castle in stainless steel or nylon with fiberglass Thrust bearing for shaft in BRONZE Rounded bottom with semi-total discharge Stainless steel full diameter filter Stainless steel tie( art. QI S51-52-S109-S110-S111-S117-S123) Stainless steel ripener 110 kg with tap art. QI R11-stainless steel handles Stainless steel hardware
€590.00Price
Optional variable speed motorization : - ELOBA MOTOR + 550,00€ (QI S86) or - MOTOR REG.ELECTRONIC + 510,00€(QI S134) Extractors "KIT" Free wheel transmission and brake Transparent polycarbonate lids fixed with hinges Transmission holder crossbar and lids, stainless steel Castle in stainless steel or nylon with fiberglass Thrust bearing for shaft in BRONZE Rounded bottom with semi-total discharge Stainless steel full diameter filter Stainless steel tie( art. QI S51-52-S109-S110-S111-S117-S123) Stainless steel ripener 110 kg with tap art. QI R11-stainless steel handles Stainless steel hardware
€590.00Price
€590.00Price
TANGENTIAL EXTRACTOR KIT D.B. for 8 Honey super combs or 4 from nest - LAYENS for 4 combs Stainless steel basket - full diameter stainless steel filter- 110 kg ripener with stainless handles -diameter 620 mm
€590.00Price
TANGENTIAL EXTRACTOR KIT D.B. for 8 Honey super combs or 4 from nest - LAYENS for 4 combs Stainless steel basket - full diameter stainless steel filter- 110 kg ripener with stainless handles -diameter 620 mm
TANGENTIAL EXTRACTOR KIT D.B. for 8 Honey super combs or 4 from nest - LAYENS for 4 combs Stainless steel basket - full diameter stainless steel filter- 110 kg ripener with stainless handles -diameter 620 mm
€590.00Price
€398.00Price
RADIAL D.B MANUAL EXTRACTOR with NYLON basket for 9 Honey super or 3 nest combs (QI C45 basket)- diameter 525 mm with 40 mm nylon cutoff spigot For nest combs, No. 3 additional cages not included are needed (code QI G06)
€398.00Price
RADIAL D.B MANUAL EXTRACTOR with NYLON basket for 9 Honey super or 3 nest combs (QI C45 basket)- diameter 525 mm with 40 mm nylon cutoff spigot For nest combs, No. 3 additional cages not included are needed (code QI G06)
RADIAL D.B MANUAL EXTRACTOR with NYLON basket for 9 Honey super or 3 nest combs (QI C45 basket)- diameter 525 mm with 40 mm nylon cutoff spigot For nest combs, No. 3 additional cages not included are needed (code QI G06)
€398.00Price
€285.00Price
LANGSTROTH MANUAL Tangential Extractor for 3 honeycombs with stainless steel basket (Code QI C41)- 370 mm- with legs- nylon tap diam. 40 mm
€285.00Price
LANGSTROTH MANUAL Tangential Extractor for 3 honeycombs with stainless steel basket (Code QI C41)- 370 mm- with legs- nylon tap diam. 40 mm
LANGSTROTH MANUAL Tangential Extractor for 3 honeycombs with stainless steel basket (Code QI C41)- 370 mm- with legs- nylon tap diam. 40 mm
€285.00Price
- -8%
€161.00Regular price-8%€175.00Price
Wax or WINE OPERATOR - Ø 15 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High-strength steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents. Dimensions : Cage 15 x 25 cm - capacity 4 L Screw diameter 20 mm Weight 8 Kg MADE IN ITALY
- -8%
€161.00Regular price-8%€175.00Price
Wax or WINE OPERATOR - Ø 15 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High-strength steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents. Dimensions : Cage 15 x 25 cm - capacity 4 L Screw diameter 20 mm Weight 8 Kg MADE IN ITALY
- -8%
Wax or WINE OPERATOR - Ø 15 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High-strength steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents. Dimensions : Cage 15 x 25 cm - capacity 4 L Screw diameter 20 mm Weight 8 Kg MADE IN ITALY
€161.00Regular price-8%€175.00Price
Optional variable speed motorization : - ELOBA MOTOR (QI S86) or - ELECTRONIC REGISTRATION MOTOR (QI S122) SERIES 2008 IS A NEW SERIES OF PLANTS DESIGNED FOR "SINGLE-BLOCK" HONEY EXTRACTION. In one machine, you have everything you need in a honey extraction room, uncapping ,operculum treatment , accumulation of uncapped combs , honey extraction and decanting of honey. The most obvious advantages are: smaller footprint, convenience in processing steps, with higher yield and reduction of 'inevitable dripping of honey on the floor. The 2008 series is produced in different versions from the hobbyist beekeeper to the professional.
€965.00Price
Optional variable speed motorization : - ELOBA MOTOR (QI S86) or - ELECTRONIC REGISTRATION MOTOR (QI S122) SERIES 2008 IS A NEW SERIES OF PLANTS DESIGNED FOR "SINGLE-BLOCK" HONEY EXTRACTION. In one machine, you have everything you need in a honey extraction room, uncapping ,operculum treatment , accumulation of uncapped combs , honey extraction and decanting of honey. The most obvious advantages are: smaller footprint, convenience in processing steps, with higher yield and reduction of 'inevitable dripping of honey on the floor. The 2008 series is produced in different versions from the hobbyist beekeeper to the professional.
€965.00Price
€965.00Price
Extractor series 2008 radial D.B. with nylon basket for 9 Honey super frames or 3 brood frames with the 'use of additional cage excluded (INOX series QI G06) with manual transmission -Nylon cutting spout diameter 40 mm Dim.[mm] : Lh: 1250 x W. 750 x Height 800 (+ Removable and height adjustable legs)
€965.00Price
Extractor series 2008 radial D.B. with nylon basket for 9 Honey super frames or 3 brood frames with the 'use of additional cage excluded (INOX series QI G06) with manual transmission -Nylon cutting spout diameter 40 mm Dim.[mm] : Lh: 1250 x W. 750 x Height 800 (+ Removable and height adjustable legs)
Extractor series 2008 radial D.B. with nylon basket for 9 Honey super frames or 3 brood frames with the 'use of additional cage excluded (INOX series QI G06) with manual transmission -Nylon cutting spout diameter 40 mm Dim.[mm] : Lh: 1250 x W. 750 x Height 800 (+ Removable and height adjustable legs)
€965.00Price
LANGSTROTH stainless steel bench for uncapping with tank cm.100x51x40 with lectern with lid and stainless steel legs Stainless steel tank Stainless steel filter for decanting operculum perforated sheet stainless steel tap nylon cod. QI R11,Ø 40 mm Stainless steel lectern cod. QI L11 Stainless steel legs Stainless steel lid Height bench for uncapping 80cm
€495.00Price
LANGSTROTH stainless steel bench for uncapping with tank cm.100x51x40 with lectern with lid and stainless steel legs Stainless steel tank Stainless steel filter for decanting operculum perforated sheet stainless steel tap nylon cod. QI R11,Ø 40 mm Stainless steel lectern cod. QI L11 Stainless steel legs Stainless steel lid Height bench for uncapping 80cm
€495.00Price
€495.00Price
LANGSTROTH stainless steel uncapping bench with 100x51x40 cm basin with lectern with lid and stainless legs
€495.00Price
LANGSTROTH stainless steel uncapping bench with 100x51x40 cm basin with lectern with lid and stainless legs
LANGSTROTH stainless steel uncapping bench with 100x51x40 cm basin with lectern with lid and stainless legs
€495.00Price
€1.10Price
REPLACEMENT TRANSPARENT BELL, with anti-condensation holes for 1 or 2lt feeders Cod. (QI N01)- (QI N03)- (QI N06)- (QI N07)
€1.10Price
REPLACEMENT TRANSPARENT BELL, with anti-condensation holes for 1 or 2lt feeders Cod. (QI N01)- (QI N03)- (QI N06)- (QI N07)
REPLACEMENT TRANSPARENT BELL, with anti-condensation holes for 1 or 2lt feeders Cod. (QI N01)- (QI N03)- (QI N06)- (QI N07)
€1.10Price
Stainless steel SUBLIMATOR for OSSALIC ACID 12 VOLT DC/AC 150 WATT with off timer. Handle length 36 cm-thick 1.5 cm The start button starts the sublimator.A bright light signals 'on by turning off at the end of a preset time.This time can be launched from 1 to 4 minutes. Warranty 1 year
€185.00Price
Stainless steel SUBLIMATOR for OSSALIC ACID 12 VOLT DC/AC 150 WATT with off timer. Handle length 36 cm-thick 1.5 cm The start button starts the sublimator.A bright light signals 'on by turning off at the end of a preset time.This time can be launched from 1 to 4 minutes. Warranty 1 year
€185.00Price
€185.00Price
Stainless steel SUBLIMATOR for OSSALIC ACID 12 VOLT DC/AC 150 WATT with SWITCH and OFF timer.-
€185.00Price
Stainless steel SUBLIMATOR for OSSALIC ACID 12 VOLT DC/AC 150 WATT with SWITCH and OFF timer.-
Stainless steel SUBLIMATOR for OSSALIC ACID 12 VOLT DC/AC 150 WATT with SWITCH and OFF timer.-
€185.00Price
€1.60Price
Round eight-way plastic STAR APISCAMPO (without tablet) For Beehives plastic beehive tablet D.B. 10 honeycombs (code QI A95A17) FIXING SCREWS TO TABLE ON REQUEST OPTIONS : - WITHOUT FIXING SCREWS - WITH FIXING SCREWS
€1.60Price
Round eight-way plastic STAR APISCAMPO (without tablet) For Beehives plastic beehive tablet D.B. 10 honeycombs (code QI A95A17) FIXING SCREWS TO TABLE ON REQUEST OPTIONS : - WITHOUT FIXING SCREWS - WITH FIXING SCREWS
Round eight-way plastic STAR APISCAMPO (without tablet) For Beehives plastic beehive tablet D.B. 10 honeycombs (code QI A95A17) FIXING SCREWS TO TABLE ON REQUEST OPTIONS : - WITHOUT FIXING SCREWS - WITH FIXING SCREWS
€1.60Price
€11.00Price
Galvanized ROOF for queen breeding box and royal jelly production (cod. PI 39)
€11.00Price
Galvanized ROOF for queen breeding box and royal jelly production (cod. PI 39)
Galvanized ROOF for queen breeding box and royal jelly production (cod. PI 39)
€11.00Price
Beehives D.B. 10 frames painted with fixed anti-varroa net bottom complete with: Nest; Honey super; 10 nest frames with wax foil; 9 honeycomb frames with wax goflio cover with 4-position disc mounted; 10-cm-high galvanized sheet metal lid lined with wood and faestile on the bottom; canopy the galvanized sheet metal; plastic transport mask; galvanized pinwheels; small metal door; 3 connection angles; spacers mounted in nest and Honey super; fixed antivarroa net bottom with galvanized sheet metal bottom removable from back; seasoned fir wood, 25mm thick; walls assembled with screws; carrying handles; Frame rest
€158.00Price
Beehives D.B. 10 frames painted with fixed anti-varroa net bottom complete with: Nest; Honey super; 10 nest frames with wax foil; 9 honeycomb frames with wax goflio cover with 4-position disc mounted; 10-cm-high galvanized sheet metal lid lined with wood and faestile on the bottom; canopy the galvanized sheet metal; plastic transport mask; galvanized pinwheels; small metal door; 3 connection angles; spacers mounted in nest and Honey super; fixed antivarroa net bottom with galvanized sheet metal bottom removable from back; seasoned fir wood, 25mm thick; walls assembled with screws; carrying handles; Frame rest
€158.00Price
€158.00Price
Standard beehives Dadant Blatt 10-frame
Beehive with fixed antivarroa net bottom complete with honeycomb, 10 nest frames and 9 honeycomb frames with mounted wax sheets Water-painted
(THE COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€158.00Price
Standard beehives Dadant Blatt 10-frame
Beehive with fixed antivarroa net bottom complete with honeycomb, 10 nest frames and 9 honeycomb frames with mounted wax sheets Water-painted
(THE COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Standard beehives Dadant Blatt 10-frame
Beehive with fixed antivarroa net bottom complete with honeycomb, 10 nest frames and 9 honeycomb frames with mounted wax sheets Water-painted
(THE COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€158.00Price
€50.00Price
MECHANICAL SEAL D.25 MINOR/MIDEX for positive displacement pump (cod. LI 5527GRM40 and LI 5537GRM40 ) SPARE
€50.00Price
MECHANICAL SEAL D.25 MINOR/MIDEX for positive displacement pump (cod. LI 5527GRM40 and LI 5537GRM40 ) SPARE
MECHANICAL SEAL D.25 MINOR/MIDEX for positive displacement pump (cod. LI 5527GRM40 and LI 5537GRM40 ) SPARE
€50.00Price
€38.00Price
APIDOU natural pellet fuel for smoker, 25kg /40L
Apidou plant pellet fuel. It produces a thick, cold, white smoke that does not harm bees and emits a pleasant smell.
To use this type of fuel, the smoker must be complete with a cylindrical pellet container
€38.00Price
APIDOU natural pellet fuel for smoker, 25kg /40L
Apidou plant pellet fuel. It produces a thick, cold, white smoke that does not harm bees and emits a pleasant smell.
To use this type of fuel, the smoker must be complete with a cylindrical pellet container
APIDOU natural pellet fuel for smoker, 25kg /40L
Apidou plant pellet fuel. It produces a thick, cold, white smoke that does not harm bees and emits a pleasant smell.
To use this type of fuel, the smoker must be complete with a cylindrical pellet container
€38.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€9.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€9.50Price
- New
- New
- New
€1.50Price
Roll of 50 stickers
8 different designs
Sticker diameter: 2.5 cm
- New
€1.50Price
Roll of 50 stickers
8 different designs
Sticker diameter: 2.5 cm
- New
Roll of 50 stickers
8 different designs
Sticker diameter: 2.5 cm
€1.50Price
OPTIONAL:
10 L stainless steel funnel (Cod. SY 1106640)
On-board start microswitch (Cod. SY 110045)
Microchip-controlled pump motor that ensures anti-drip function
The DANA api MATIC 1000 is a gear pump filler. A powerful low-voltage DC motor drives the gear pump with the help of a helical gear. The motor is controlled by computer electronics, which also ensures perfect anti-drip function. The filler has 20 filling programs with settings for weight, calibration factor and other filling parameters. The machine works precisely and is easy to program for different substances. As a pump, the machine works in both directions and can be set to different speeds. All parts that come into contact with the substance are made of food-grade plastic or stainless steel and are easy to disassemble and clean.
The stand is made of sturdy stainless steel and has a plastic jar guide, which you can rest the jar on, so that it is centered exactly under the nozzle. The jar guide can also be adjusted back and forth depending on the diameter of the jar.
The stand can be adjusted to 13 different heights in 0.5 cm increments.
The stand can be used for jars that have a full height of between 3.5 cm and 23.5 cm. It measures 37 x 32 x 41 cm and weighs 4.6 kg.
TECHNICAL DATA
Machine type: computer-controlled gear pump
Filling capacity: 10 g - 10 Kg (honey)
Weight unit: ml / g / oz
Accuracy: +/- 2 g
Pump capacity: approx. 270 kg/hour
Programs: over 20 options to program
Power supply: 90-264VAC 50/60Hz
Power: 230 W
Noise level: the sound pressure level of the pump is less than 70 dB(A)
Weight: approx. 10.5 kg
Dimensions: 33 x 31 x 18.5 cm
Connections: 1½" - 40 mm BS hose connection on both sides of the pump
The machine is fitted with:
110075- Foot switch
110059- Counterflow valve
115815- Dosing syringe 0-60 ml
500110F- Nut for BS connection 1½" - 40 mm
110065C- Complete cutting cross ø20
110165- 1½" - 40 mm hose
110110A- Curved BS connection 1½" - 40 mm
110175- Hose connector 1½" - 40 mm
With the machine you receive a spare parts set included containing:
2 x 110065D Cross cut Ø20
2 x 110072 Black rubber diaphragm
2 x 500212 Gasket BS 1½
2 x 502740 Hand-fitting nuts for head
2 x 508037 O-ring 37x2 NBR 70
1 x 508082 O-ring 82x2 NBR 70
€8,100.00Price
OPTIONAL:
10 L stainless steel funnel (Cod. SY 1106640)
On-board start microswitch (Cod. SY 110045)
Microchip-controlled pump motor that ensures anti-drip function
The DANA api MATIC 1000 is a gear pump filler. A powerful low-voltage DC motor drives the gear pump with the help of a helical gear. The motor is controlled by computer electronics, which also ensures perfect anti-drip function. The filler has 20 filling programs with settings for weight, calibration factor and other filling parameters. The machine works precisely and is easy to program for different substances. As a pump, the machine works in both directions and can be set to different speeds. All parts that come into contact with the substance are made of food-grade plastic or stainless steel and are easy to disassemble and clean.
The stand is made of sturdy stainless steel and has a plastic jar guide, which you can rest the jar on, so that it is centered exactly under the nozzle. The jar guide can also be adjusted back and forth depending on the diameter of the jar.
The stand can be adjusted to 13 different heights in 0.5 cm increments.
The stand can be used for jars that have a full height of between 3.5 cm and 23.5 cm. It measures 37 x 32 x 41 cm and weighs 4.6 kg.
TECHNICAL DATA
Machine type: computer-controlled gear pump
Filling capacity: 10 g - 10 Kg (honey)
Weight unit: ml / g / oz
Accuracy: +/- 2 g
Pump capacity: approx. 270 kg/hour
Programs: over 20 options to program
Power supply: 90-264VAC 50/60Hz
Power: 230 W
Noise level: the sound pressure level of the pump is less than 70 dB(A)
Weight: approx. 10.5 kg
Dimensions: 33 x 31 x 18.5 cm
Connections: 1½" - 40 mm BS hose connection on both sides of the pump
The machine is fitted with:
110075- Foot switch
110059- Counterflow valve
115815- Dosing syringe 0-60 ml
500110F- Nut for BS connection 1½" - 40 mm
110065C- Complete cutting cross ø20
110165- 1½" - 40 mm hose
110110A- Curved BS connection 1½" - 40 mm
110175- Hose connector 1½" - 40 mm
With the machine you receive a spare parts set included containing:
2 x 110065D Cross cut Ø20
2 x 110072 Black rubber diaphragm
2 x 500212 Gasket BS 1½
2 x 502740 Hand-fitting nuts for head
2 x 508037 O-ring 37x2 NBR 70
1 x 508082 O-ring 82x2 NBR 70
€8,100.00Price
€8,100.00Price
By placing the empty jars on the table, they will be automatically transported by a photocell under the filling machine. The table will start rotating again until the next jar reaches the filling position.
ELECTRONIC JAR FILLING MACHINE for honey with programming display
COMPLETE WITH: HEIGHT-ADJUSTABLE STAINLESS STEEL TABLE SUPPORT, WITH JAR CENTERING
The filling machine is supplied complete with fittings, 40 mm diameter tube, tube clamp to the filling machine, spare parts
With the table support you can easily and quickly adjust the height of the filling machine to adapt jars with different heights and with a support guide to center the jar exactly under the nozzle.
- DOSAGE FROM 50 g to 10 Kg - PRECISION +/- 2 g
- 20 programs to set and calibrate relative weights to keep in memory (also suitable for other viscous liquids)- Power supply 96-269 VAC (use 230 V - 50 Hz) - 230 W
- ROTARY TABLE: Ø 700 mm
€8,100.00Price
By placing the empty jars on the table, they will be automatically transported by a photocell under the filling machine. The table will start rotating again until the next jar reaches the filling position.
ELECTRONIC JAR FILLING MACHINE for honey with programming display
COMPLETE WITH: HEIGHT-ADJUSTABLE STAINLESS STEEL TABLE SUPPORT, WITH JAR CENTERING
The filling machine is supplied complete with fittings, 40 mm diameter tube, tube clamp to the filling machine, spare parts
With the table support you can easily and quickly adjust the height of the filling machine to adapt jars with different heights and with a support guide to center the jar exactly under the nozzle.
- DOSAGE FROM 50 g to 10 Kg - PRECISION +/- 2 g
- 20 programs to set and calibrate relative weights to keep in memory (also suitable for other viscous liquids)- Power supply 96-269 VAC (use 230 V - 50 Hz) - 230 W
- ROTARY TABLE: Ø 700 mm
By placing the empty jars on the table, they will be automatically transported by a photocell under the filling machine. The table will start rotating again until the next jar reaches the filling position.
ELECTRONIC JAR FILLING MACHINE for honey with programming display
COMPLETE WITH: HEIGHT-ADJUSTABLE STAINLESS STEEL TABLE SUPPORT, WITH JAR CENTERING
The filling machine is supplied complete with fittings, 40 mm diameter tube, tube clamp to the filling machine, spare parts
With the table support you can easily and quickly adjust the height of the filling machine to adapt jars with different heights and with a support guide to center the jar exactly under the nozzle.
- DOSAGE FROM 50 g to 10 Kg - PRECISION +/- 2 g
- 20 programs to set and calibrate relative weights to keep in memory (also suitable for other viscous liquids)- Power supply 96-269 VAC (use 230 V - 50 Hz) - 230 W
- ROTARY TABLE: Ø 700 mm
€8,100.00Price
€8.00Price
Large candle with beeswax firsWidth: 8 cm - Depth: 8 cmHeight: 14 cm - Weight: 443 gMADE IN ITALY
€8.00Price
Large candle with beeswax firsWidth: 8 cm - Depth: 8 cmHeight: 14 cm - Weight: 443 gMADE IN ITALY
Large candle with beeswax firsWidth: 8 cm - Depth: 8 cmHeight: 14 cm - Weight: 443 gMADE IN ITALY
€8.00Price
Accessories:
Pocket feeder for split-section polystyrene hives (PI 0612/NUTR)
Polystyrene separator for split-section hives (PI 0612/SEP)
€32.00Price
Accessories:
Pocket feeder for split-section polystyrene hives (PI 0612/NUTR)
Polystyrene separator for split-section hives (PI 0612/SEP)
€32.00Price
€32.00Price
Beehive made of expanded polystyrene (PSE) with high density and suitable for food use.DENSITY 100/100Structured to be able to insert a dividing wall that allows the Beehive to be used with two families (3 frames + 3 frames).
The two hanging feeders each have capacities greater than 2 L and allow both families to be fed at the same time.
Equipped with a large ventilation net at the bottom and fitted with a removable honeycomb polypropylene diagnostic drawer for varroa control.Comes complete with lid, two inlet plugs, two pocket feeders, ventilation net and diagnostic drawer.
Width: 28 cm
For accessories see below
€32.00Price
Beehive made of expanded polystyrene (PSE) with high density and suitable for food use.DENSITY 100/100Structured to be able to insert a dividing wall that allows the Beehive to be used with two families (3 frames + 3 frames).
The two hanging feeders each have capacities greater than 2 L and allow both families to be fed at the same time.
Equipped with a large ventilation net at the bottom and fitted with a removable honeycomb polypropylene diagnostic drawer for varroa control.Comes complete with lid, two inlet plugs, two pocket feeders, ventilation net and diagnostic drawer.
Width: 28 cm
For accessories see below
Beehive made of expanded polystyrene (PSE) with high density and suitable for food use.DENSITY 100/100Structured to be able to insert a dividing wall that allows the Beehive to be used with two families (3 frames + 3 frames).
The two hanging feeders each have capacities greater than 2 L and allow both families to be fed at the same time.
Equipped with a large ventilation net at the bottom and fitted with a removable honeycomb polypropylene diagnostic drawer for varroa control.Comes complete with lid, two inlet plugs, two pocket feeders, ventilation net and diagnostic drawer.
Width: 28 cm
For accessories see below
€32.00Price
- Accessories11) Honey super D.B. 6-frame honeycomb (Cod. QI M60)12) Front spacer (Cod. QI D32)13) Side reinforcement (Cod. QI R128)14) Polystyrene lid with mesh (Cod. QI C16)15) Wood and mesh lid (Cod. PI 38/A)16) Perforated sheet metal cover (Cod. FO 1045)17) Perforated plastic cover (Cod. ES RT)18) Sheet metal roof (Cod. FO 1042) BottomDrawer bottom for Beehive d.b. 6 honeycombs in light blue polystyrene (Cod. QI F56)- Porches 21) Galvanized porch center position (Cod. QI P25)22) Galvanized protective porch with slider (Cod. QI P35)23) Replacement slider for protective porch (Cod. QI P36)- Feeders31) Feeders to cover hive 1 hole (Cod. QI N06)32) Cable cover feeder 1 hole new (Cod. QI N07)33) Double compartment cable cover feeder (Cod. QI N12)34) Replacement bell (Cod. QI C97)35) Replacement Vulcanello (Cod. QI C107)
€32.00Price
- Accessories11) Honey super D.B. 6-frame honeycomb (Cod. QI M60)12) Front spacer (Cod. QI D32)13) Side reinforcement (Cod. QI R128)14) Polystyrene lid with mesh (Cod. QI C16)15) Wood and mesh lid (Cod. PI 38/A)16) Perforated sheet metal cover (Cod. FO 1045)17) Perforated plastic cover (Cod. ES RT)18) Sheet metal roof (Cod. FO 1042) BottomDrawer bottom for Beehive d.b. 6 honeycombs in light blue polystyrene (Cod. QI F56)- Porches 21) Galvanized porch center position (Cod. QI P25)22) Galvanized protective porch with slider (Cod. QI P35)23) Replacement slider for protective porch (Cod. QI P36)- Feeders31) Feeders to cover hive 1 hole (Cod. QI N06)32) Cable cover feeder 1 hole new (Cod. QI N07)33) Double compartment cable cover feeder (Cod. QI N12)34) Replacement bell (Cod. QI C97)35) Replacement Vulcanello (Cod. QI C107)
€32.00Price
€32.00Price
BEEHIVES D.B. by 6 honeycombs made of high-density polystyrene (80)Double anti-moth net on bottom fixed 77x375Double opening, front and rear Anti-frame movement spacers on the bottomColors light blue/pastel green depending on availabilityPolystyrene closing lidExternal dimensions 275 x 495 mmNucleus hive support feet placed sideways with full lengthComplete with upper pink plastic (ABS) edging to reinforce spacers and side edgesDivisible in 2 bee colonies (3 + 3 frames)With internal grooves to accommodate dividing diaphragmGalvanized sheet metal guides for bottom - FOR optional BOTTOM INSERTION Art.F56Stainless steel diaphragm for dividing Beehive 6 into 3+3 not included (Item No. D45)FAESTE diaphragm for dividing Beehive 6 into 3+3 not included (Item No. D48) - Spare Parts 41) Polystyrene hatch (Item No. QI P21)42) Polystyrene lid (Item No. QI C16B) SEE accessories below
€32.00Price
BEEHIVES D.B. by 6 honeycombs made of high-density polystyrene (80)Double anti-moth net on bottom fixed 77x375Double opening, front and rear Anti-frame movement spacers on the bottomColors light blue/pastel green depending on availabilityPolystyrene closing lidExternal dimensions 275 x 495 mmNucleus hive support feet placed sideways with full lengthComplete with upper pink plastic (ABS) edging to reinforce spacers and side edgesDivisible in 2 bee colonies (3 + 3 frames)With internal grooves to accommodate dividing diaphragmGalvanized sheet metal guides for bottom - FOR optional BOTTOM INSERTION Art.F56Stainless steel diaphragm for dividing Beehive 6 into 3+3 not included (Item No. D45)FAESTE diaphragm for dividing Beehive 6 into 3+3 not included (Item No. D48) - Spare Parts 41) Polystyrene hatch (Item No. QI P21)42) Polystyrene lid (Item No. QI C16B) SEE accessories below
BEEHIVES D.B. by 6 honeycombs made of high-density polystyrene (80)Double anti-moth net on bottom fixed 77x375Double opening, front and rear Anti-frame movement spacers on the bottomColors light blue/pastel green depending on availabilityPolystyrene closing lidExternal dimensions 275 x 495 mmNucleus hive support feet placed sideways with full lengthComplete with upper pink plastic (ABS) edging to reinforce spacers and side edgesDivisible in 2 bee colonies (3 + 3 frames)With internal grooves to accommodate dividing diaphragmGalvanized sheet metal guides for bottom - FOR optional BOTTOM INSERTION Art.F56Stainless steel diaphragm for dividing Beehive 6 into 3+3 not included (Item No. D45)FAESTE diaphragm for dividing Beehive 6 into 3+3 not included (Item No. D48) - Spare Parts 41) Polystyrene hatch (Item No. QI P21)42) Polystyrene lid (Item No. QI C16B) SEE accessories below
€32.00Price
€1.70Price
Replacement wooden frame and for polystyrene fertilization beehive mini core 'LYSON' (Ref. HY W10860)
€1.70Price
Replacement wooden frame and for polystyrene fertilization beehive mini core 'LYSON' (Ref. HY W10860)
Replacement wooden frame and for polystyrene fertilization beehive mini core 'LYSON' (Ref. HY W10860)
€1.70Price
- Accessories11) Honey super D.B. 6 honeycomb (Cod. QI M60)12) Front spacer (Cod. QI D32)13) Side reinforcement (Cod. QI R128)14) Polystyrene lid with mesh (Cod. QI C16)15) Wood and mesh lid (Cod. PI 38/A)16) Perforated sheet metal lid (Cod. FO 1045)17) Perforated plastic lid (Cod. ES RT)18) Sheet metal roof (Cod. FO 1042)- Porches 21) Galvanized porch center position (Cod. QI P25)22) Galvanized protection porch with slider (Cod. QI P35)23) Replacement slider protection porch (Cod. QI P36)- Feeders31) Nutrient cover 1 hole (Cod. QI N06)32) Cable cover feeder 1 hole new (Cod. QI N07)33) Double compartment cable cover feeder (Cod. QI N12)34) Replacement bell (Cod. QI C97)35) Replacement Vulcanello (Cod. QI C107)
€14.50Price
- Accessories11) Honey super D.B. 6 honeycomb (Cod. QI M60)12) Front spacer (Cod. QI D32)13) Side reinforcement (Cod. QI R128)14) Polystyrene lid with mesh (Cod. QI C16)15) Wood and mesh lid (Cod. PI 38/A)16) Perforated sheet metal lid (Cod. FO 1045)17) Perforated plastic lid (Cod. ES RT)18) Sheet metal roof (Cod. FO 1042)- Porches 21) Galvanized porch center position (Cod. QI P25)22) Galvanized protection porch with slider (Cod. QI P35)23) Replacement slider protection porch (Cod. QI P36)- Feeders31) Nutrient cover 1 hole (Cod. QI N06)32) Cable cover feeder 1 hole new (Cod. QI N07)33) Double compartment cable cover feeder (Cod. QI N12)34) Replacement bell (Cod. QI C97)35) Replacement Vulcanello (Cod. QI C107)
€14.50Price
€14.50Price
Beehives D.B. 6-FAVES ECONOMIC low-density polystyrene (30) - Complete with polystyrene lid - Wall thickness 2 cm - Lateral mesh at the bottom fixed anti-varroa (52 x 320 mm) -front opening - anti-frame movement spacers on the bottom - white colorExternal measurements 275 x 495 mm - Spare parts 41) Polystyrene door (Code QI P21)42) Polystyrene lid (Art. QI C16B)SEE accessories below
€14.50Price
Beehives D.B. 6-FAVES ECONOMIC low-density polystyrene (30) - Complete with polystyrene lid - Wall thickness 2 cm - Lateral mesh at the bottom fixed anti-varroa (52 x 320 mm) -front opening - anti-frame movement spacers on the bottom - white colorExternal measurements 275 x 495 mm - Spare parts 41) Polystyrene door (Code QI P21)42) Polystyrene lid (Art. QI C16B)SEE accessories below
Beehives D.B. 6-FAVES ECONOMIC low-density polystyrene (30) - Complete with polystyrene lid - Wall thickness 2 cm - Lateral mesh at the bottom fixed anti-varroa (52 x 320 mm) -front opening - anti-frame movement spacers on the bottom - white colorExternal measurements 275 x 495 mm - Spare parts 41) Polystyrene door (Code QI P21)42) Polystyrene lid (Art. QI C16B)SEE accessories below
€14.50Price
€68.00Price
Table-top uncapping bench, with 600x400x130 mm plastic tank, drip tray and stainless steel frame-holder stand.Optional to add stainless steel cover (Code FO 2173)
€68.00Price
Table-top uncapping bench, with 600x400x130 mm plastic tank, drip tray and stainless steel frame-holder stand.Optional to add stainless steel cover (Code FO 2173)
Table-top uncapping bench, with 600x400x130 mm plastic tank, drip tray and stainless steel frame-holder stand.Optional to add stainless steel cover (Code FO 2173)
€68.00Price
€0.25Price
Plastic vacuum feeder cap (PI 0346/N) Dimensions: diameter 4.3 cm - height 2 cm
€0.25Price
Plastic vacuum feeder cap (PI 0346/N) Dimensions: diameter 4.3 cm - height 2 cm
Plastic vacuum feeder cap (PI 0346/N) Dimensions: diameter 4.3 cm - height 2 cm
€0.25Price
€4.80Price
Lavender essential oil 10ml for scenting soaps, 10ml size (gross weight 42 g)
€4.80Price
Lavender essential oil 10ml for scenting soaps, 10ml size (gross weight 42 g)
Lavender essential oil 10ml for scenting soaps, 10ml size (gross weight 42 g)
€4.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€72.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€72.80Price
€72.80Price
Silicone gnome candle mold Height: 110mm - Weight: 0.790kg Wax weight: 155g - Wick: 3mm Mold diameter: 75mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€72.80Price
Silicone gnome candle mold Height: 110mm - Weight: 0.790kg Wax weight: 155g - Wick: 3mm Mold diameter: 75mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone gnome candle mold Height: 110mm - Weight: 0.790kg Wax weight: 155g - Wick: 3mm Mold diameter: 75mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€72.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€15.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€15.00Price
€15.00Price
mold diameter: 55 mm Mold weight 0.070 kg Wax weight 10 gWickless Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€15.00Price
mold diameter: 55 mm Mold weight 0.070 kg Wax weight 10 gWickless Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
mold diameter: 55 mm Mold weight 0.070 kg Wax weight 10 gWickless Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€15.00Price
€118.00Price
The basic kit for de-capping honey frames:
-Fork with steel tips for de-capping (FO 2704)
-Round conical plastic food-grade bucket with nylon cut-off spigot - CHOICE BETWEEN 40 kg (FO 3315-R) and 25 kg (RK 8190B+R)
-De-capping bench with plastic drip tray and stainless steel stand (FO 2172)
-Double honey filter extendable for bucket and ripeners up to 100 kg (FO 2640)
Possibility to add:
-Manual Tangential honey extractor D.B. for 4 Honey super frames or 2 nest frames- table-top (QI S29I)
€118.00Price
The basic kit for de-capping honey frames:
-Fork with steel tips for de-capping (FO 2704)
-Round conical plastic food-grade bucket with nylon cut-off spigot - CHOICE BETWEEN 40 kg (FO 3315-R) and 25 kg (RK 8190B+R)
-De-capping bench with plastic drip tray and stainless steel stand (FO 2172)
-Double honey filter extendable for bucket and ripeners up to 100 kg (FO 2640)
Possibility to add:
-Manual Tangential honey extractor D.B. for 4 Honey super frames or 2 nest frames- table-top (QI S29I)
The basic kit for de-capping honey frames:
-Fork with steel tips for de-capping (FO 2704)
-Round conical plastic food-grade bucket with nylon cut-off spigot - CHOICE BETWEEN 40 kg (FO 3315-R) and 25 kg (RK 8190B+R)
-De-capping bench with plastic drip tray and stainless steel stand (FO 2172)
-Double honey filter extendable for bucket and ripeners up to 100 kg (FO 2640)
Possibility to add:
-Manual Tangential honey extractor D.B. for 4 Honey super frames or 2 nest frames- table-top (QI S29I)
€118.00Price
€0.22Price
DEEP CAPSULE H14 TO 82 for 770ml MIELE PLUS jar
Diameter 82 mm - H = 14 mm
BOX of 540
COLOR OPTIONS: Gold - Silver
SUITABLE FOR HOT PASTEURIZATION PROCESSES WITH VACUUM SAFETY BUTTON
€0.22Price
DEEP CAPSULE H14 TO 82 for 770ml MIELE PLUS jar
Diameter 82 mm - H = 14 mm
BOX of 540
COLOR OPTIONS: Gold - Silver
SUITABLE FOR HOT PASTEURIZATION PROCESSES WITH VACUUM SAFETY BUTTON
DEEP CAPSULE H14 TO 82 for 770ml MIELE PLUS jar
Diameter 82 mm - H = 14 mm
BOX of 540
COLOR OPTIONS: Gold - Silver
SUITABLE FOR HOT PASTEURIZATION PROCESSES WITH VACUUM SAFETY BUTTON
€0.22Price
€0.09Price
Twist-off CAPSULE RTS-RTO TO 43 (diam. 43 mm) GOLD COLOR for 50 or 35 g honey jar smooth EDGE with notches: height = 9 mm SUITABLE FOR HOT STERILIZATION PROCESSES WITH UNDERVOCTABLE SAFETY BUTTON COLOR OPTIONS: Gold - white - silver
€0.09Price
Twist-off CAPSULE RTS-RTO TO 43 (diam. 43 mm) GOLD COLOR for 50 or 35 g honey jar smooth EDGE with notches: height = 9 mm SUITABLE FOR HOT STERILIZATION PROCESSES WITH UNDERVOCTABLE SAFETY BUTTON COLOR OPTIONS: Gold - white - silver
Twist-off CAPSULE RTS-RTO TO 43 (diam. 43 mm) GOLD COLOR for 50 or 35 g honey jar smooth EDGE with notches: height = 9 mm SUITABLE FOR HOT STERILIZATION PROCESSES WITH UNDERVOCTABLE SAFETY BUTTON COLOR OPTIONS: Gold - white - silver
€0.09Price
€0.09Price
Twist-off CAPSULE RTS-RTO TO 43 (diam. 43 mm) GOLD COLOR for 50 or 35 g honey jar smooth EDGE with notches: height = 9 mm SUITABLE FOR HOT PASTEURIZING PROCESSES WITH UNDERVOCTABLE SAFETY BUTTON COLOR OPTIONS: Gold - Green - White
€0.09Price
Twist-off CAPSULE RTS-RTO TO 43 (diam. 43 mm) GOLD COLOR for 50 or 35 g honey jar smooth EDGE with notches: height = 9 mm SUITABLE FOR HOT PASTEURIZING PROCESSES WITH UNDERVOCTABLE SAFETY BUTTON COLOR OPTIONS: Gold - Green - White
Twist-off CAPSULE RTS-RTO TO 43 (diam. 43 mm) GOLD COLOR for 50 or 35 g honey jar smooth EDGE with notches: height = 9 mm SUITABLE FOR HOT PASTEURIZING PROCESSES WITH UNDERVOCTABLE SAFETY BUTTON COLOR OPTIONS: Gold - Green - White
€0.09Price
€98.00Price
Dadant Blatt 12-frame Honey super moving cart with swivel wheels and removable tray
€98.00Price
Dadant Blatt 12-frame Honey super moving cart with swivel wheels and removable tray
Dadant Blatt 12-frame Honey super moving cart with swivel wheels and removable tray
€98.00Price
For those looking for a complete all-round filtering device, the new BLS 424 ABEK1P3 R combination filter will satisfy any need! This particular product offers total protection for the respiratory tract, a crucial aspect when working in environments in contact with substances that are particularly harmful to health, so it is necessary to assess all risks in advance to make an informed purchase. The BLS 424 ABEK1P3 R filter offers protection against various pollutants such as: Particulates i.e. dust, mists and fumes Organic and inorganic gases and vapors with boiling points above 65° Acidic gases such as hydrochloric acid, sulfuric acid, hydrofluoric acid, etc. Ammonia and derivatives Its structure consists of a durable ABS casing with two combined cartridges inside to offer dual protection: a pleated fabric filter allows 99.99% of particulates to be filtered out, equally reducing respiratory fatigue; a particularly porous activated carbon filter traps gases and vapors on internal surfaces while fully complying with all safety standards due to the absence of toxic additives. The BLS 424 ABEK1P3 R filter is exclusively compatible with BLS SGE46 half-masks, 5000 series (5150, 5400) whole masks and 3000 series masks due to the universal connection with standardized threads. The device is certified as Category III PPE complying with technical standard EN 143:2000 + A1:2006 and EN 14387:2004 + A1:2008. The package contains 4 pcs.
€29.00Price
For those looking for a complete all-round filtering device, the new BLS 424 ABEK1P3 R combination filter will satisfy any need! This particular product offers total protection for the respiratory tract, a crucial aspect when working in environments in contact with substances that are particularly harmful to health, so it is necessary to assess all risks in advance to make an informed purchase. The BLS 424 ABEK1P3 R filter offers protection against various pollutants such as: Particulates i.e. dust, mists and fumes Organic and inorganic gases and vapors with boiling points above 65° Acidic gases such as hydrochloric acid, sulfuric acid, hydrofluoric acid, etc. Ammonia and derivatives Its structure consists of a durable ABS casing with two combined cartridges inside to offer dual protection: a pleated fabric filter allows 99.99% of particulates to be filtered out, equally reducing respiratory fatigue; a particularly porous activated carbon filter traps gases and vapors on internal surfaces while fully complying with all safety standards due to the absence of toxic additives. The BLS 424 ABEK1P3 R filter is exclusively compatible with BLS SGE46 half-masks, 5000 series (5150, 5400) whole masks and 3000 series masks due to the universal connection with standardized threads. The device is certified as Category III PPE complying with technical standard EN 143:2000 + A1:2006 and EN 14387:2004 + A1:2008. The package contains 4 pcs.
€29.00Price
€29.00Price
Compatible with BLS SGE46 half-masks, 5000 series and 3000 series full masks - ABEK1P3 R protection - against organic, inorganic and acidic gases and vapors, ammonia and derivatives, and particulates - class 1 (Code FO 3442)
€29.00Price
Compatible with BLS SGE46 half-masks, 5000 series and 3000 series full masks - ABEK1P3 R protection - against organic, inorganic and acidic gases and vapors, ammonia and derivatives, and particulates - class 1 (Code FO 3442)
Compatible with BLS SGE46 half-masks, 5000 series and 3000 series full masks - ABEK1P3 R protection - against organic, inorganic and acidic gases and vapors, ammonia and derivatives, and particulates - class 1 (Code FO 3442)
€29.00Price
€950.00Price
Chimney-type Beehives. It is a very safe option to install in parks, gardens or exhibitions because due to its design, bees enter and exit at high meters above the ground. This chimney comes with a stand and a Beehive. With this kit you can install your colony with peace of mind while respecting the rural code. The chimney and its stand allow you to transform your 10-frame Beehive into a hive ready to be installed in urban exteriors with a bee exit more than 2.40 meters high. The Beehive has a glazed section that allows you to observe the comings and goings of the bees.
€950.00Price
Chimney-type Beehives. It is a very safe option to install in parks, gardens or exhibitions because due to its design, bees enter and exit at high meters above the ground. This chimney comes with a stand and a Beehive. With this kit you can install your colony with peace of mind while respecting the rural code. The chimney and its stand allow you to transform your 10-frame Beehive into a hive ready to be installed in urban exteriors with a bee exit more than 2.40 meters high. The Beehive has a glazed section that allows you to observe the comings and goings of the bees.
Chimney-type Beehives. It is a very safe option to install in parks, gardens or exhibitions because due to its design, bees enter and exit at high meters above the ground. This chimney comes with a stand and a Beehive. With this kit you can install your colony with peace of mind while respecting the rural code. The chimney and its stand allow you to transform your 10-frame Beehive into a hive ready to be installed in urban exteriors with a bee exit more than 2.40 meters high. The Beehive has a glazed section that allows you to observe the comings and goings of the bees.
€950.00Price
€1.18Price
FLOTT : 5 ml - Ø 22 mm - h 50 mm - Mouth PFP 18 SPRAY NEBULIZER LARYNGEOUS SHORT 5 ml - draw straw 5 cm Packaged in thermopack of 228 pieces
€1.18Price
FLOTT : 5 ml - Ø 22 mm - h 50 mm - Mouth PFP 18 SPRAY NEBULIZER LARYNGEOUS SHORT 5 ml - draw straw 5 cm Packaged in thermopack of 228 pieces
FLOTT : 5 ml - Ø 22 mm - h 50 mm - Mouth PFP 18 SPRAY NEBULIZER LARYNGEOUS SHORT 5 ml - draw straw 5 cm Packaged in thermopack of 228 pieces
€1.18Price
€72.00Price
STRETCH stainless steel "U" end tube for food pipe diam. 50 mm for honey pump connection - Dim.: ...................
€72.00Price
STRETCH stainless steel "U" end tube for food pipe diam. 50 mm for honey pump connection - Dim.: ...................
STRETCH stainless steel "U" end tube for food pipe diam. 50 mm for honey pump connection - Dim.: ...................
€72.00Price
Beehives D.B 10 honeycomb standard painted with mobile anti-varroa bottom complete with: Nest; 10 brood frames mounted, drilled and strung; honeycomb cover with 4-position disc mounted; 10cm-high galvanized sheet metal cover lined with wood and faestile on the bottom; metal door; 3 connection angles; 10-frame spacers mounted in the nest; movable anti-moth net bottom with galvanized sheet metal tray removable from the back; 25mm thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest; spring hook with screws for fixing movable bottom
€113.00Price
Beehives D.B 10 honeycomb standard painted with mobile anti-varroa bottom complete with: Nest; 10 brood frames mounted, drilled and strung; honeycomb cover with 4-position disc mounted; 10cm-high galvanized sheet metal cover lined with wood and faestile on the bottom; metal door; 3 connection angles; 10-frame spacers mounted in the nest; movable anti-moth net bottom with galvanized sheet metal tray removable from the back; 25mm thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest; spring hook with screws for fixing movable bottom
€113.00Price
€113.00Price
Beehive Dadant Blatt 10-frame standard beehive with movable anti-varroa net bottom. Complete with 10 mounted, drilled and threaded nest frames - Paint + Paraffin coating (FOOD PARAFFIN) Paraffin coating is done in a hot bath with immersion, the entire Beehive is paraffined inside and out, to ensure the durability of the Beehives (COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€113.00Price
Beehive Dadant Blatt 10-frame standard beehive with movable anti-varroa net bottom. Complete with 10 mounted, drilled and threaded nest frames - Paint + Paraffin coating (FOOD PARAFFIN) Paraffin coating is done in a hot bath with immersion, the entire Beehive is paraffined inside and out, to ensure the durability of the Beehives (COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehive Dadant Blatt 10-frame standard beehive with movable anti-varroa net bottom. Complete with 10 mounted, drilled and threaded nest frames - Paint + Paraffin coating (FOOD PARAFFIN) Paraffin coating is done in a hot bath with immersion, the entire Beehive is paraffined inside and out, to ensure the durability of the Beehives (COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€113.00Price
€9.50Price
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€9.50Price
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€9.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€33.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€33.00Price
€33.00Price
Silicone mold for large molded bee candle Height: 155 mm - Wax weight: 50 g - Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€33.00Price
Silicone mold for large molded bee candle Height: 155 mm - Wax weight: 50 g - Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone mold for large molded bee candle Height: 155 mm - Wax weight: 50 g - Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€33.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold with wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€38.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold with wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€38.00Price
€38.00Price
Silicone mold for candle smooth cylinder (medium) Mold height: 120 mm - Wax weight: 205 g - Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€38.00Price
Silicone mold for candle smooth cylinder (medium) Mold height: 120 mm - Wax weight: 205 g - Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone mold for candle smooth cylinder (medium) Mold height: 120 mm - Wax weight: 205 g - Recommended wick: 2 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€38.00Price
€3.90Price
Gasket kit for shear taps with 40mm diameter. Compatible with Quarti faucets and Lega faucets. No. 5 gaskets
€3.90Price
Gasket kit for shear taps with 40mm diameter. Compatible with Quarti faucets and Lega faucets. No. 5 gaskets
Gasket kit for shear taps with 40mm diameter. Compatible with Quarti faucets and Lega faucets. No. 5 gaskets
€3.90Price
HalaApi 898 is a highly effective, EDTA/NTA-free foam cleaner that can dissolve and remove wax residues, propolis and other dirt without difficulty. For cleaning wood, glass, stainless steel, plastics and stone. Not suitable for use on aluminum and colored metals or on galvanized and tin-plated surfaces. If applied thoroughly, it reduces the bacterial load on the treated surface.
€24.00Price
HalaApi 898 is a highly effective, EDTA/NTA-free foam cleaner that can dissolve and remove wax residues, propolis and other dirt without difficulty. For cleaning wood, glass, stainless steel, plastics and stone. Not suitable for use on aluminum and colored metals or on galvanized and tin-plated surfaces. If applied thoroughly, it reduces the bacterial load on the treated surface.
€24.00Price
€24.00Price
2HALAAPI 1.2 kg DISINFECTANT DETERGENT for HONEY HUNDRY. Useful for cleaning Beehives, Honey super and honey extraction rooms. It should be used cold by skimmers on Beehives or manually in a hot/cold water bath as a special detergent. Technical Data Sheet.
€24.00Price
2HALAAPI 1.2 kg DISINFECTANT DETERGENT for HONEY HUNDRY. Useful for cleaning Beehives, Honey super and honey extraction rooms. It should be used cold by skimmers on Beehives or manually in a hot/cold water bath as a special detergent. Technical Data Sheet.
2HALAAPI 1.2 kg DISINFECTANT DETERGENT for HONEY HUNDRY. Useful for cleaning Beehives, Honey super and honey extraction rooms. It should be used cold by skimmers on Beehives or manually in a hot/cold water bath as a special detergent. Technical Data Sheet.
€24.00Price
This special cage allows the queen and escorts to be captured quickly and easily, and also allows the escorts to be released, leaving the queen alone before introdizone. Each cage consists of 3 quick-assembly pieces
€1.10Price
This special cage allows the queen and escorts to be captured quickly and easily, and also allows the escorts to be released, leaving the queen alone before introdizone. Each cage consists of 3 quick-assembly pieces
€1.10Price
€1.10Price
Clear plastic cage for transporting queens. It has a water compartment, allowing the queen and attendants a long survival.
€1.10Price
Clear plastic cage for transporting queens. It has a water compartment, allowing the queen and attendants a long survival.
Clear plastic cage for transporting queens. It has a water compartment, allowing the queen and attendants a long survival.
€1.10Price
€108.00Price
Stainless steel honey filter for 200-, 400-kg ripeners with a minimum diameter of ø 480 mm and a maximum diameter of ø 680 mm, with stainless steel mesh. Folding steel supports on the outside allow the filter to be adapted to both 200-kg and 400-kg maturers.
€108.00Price
Stainless steel honey filter for 200-, 400-kg ripeners with a minimum diameter of ø 480 mm and a maximum diameter of ø 680 mm, with stainless steel mesh. Folding steel supports on the outside allow the filter to be adapted to both 200-kg and 400-kg maturers.
Stainless steel honey filter for 200-, 400-kg ripeners with a minimum diameter of ø 480 mm and a maximum diameter of ø 680 mm, with stainless steel mesh. Folding steel supports on the outside allow the filter to be adapted to both 200-kg and 400-kg maturers.
€108.00Price
€1.20Price
REPLACEMENT SEALING CAP for Aspro-Novar-Form Canvas Pack of 3
€1.20Price
REPLACEMENT SEALING CAP for Aspro-Novar-Form Canvas Pack of 3
REPLACEMENT SEALING CAP for Aspro-Novar-Form Canvas Pack of 3
€1.20Price
€5.90Price
ROUND CONICAL white plastic bucket - with LID pressure tight closure and safety tab - PLASTIC HANDLE FOR FOODS with MOK CertificateCapacity : 19.5 L - Diameter 32.3 cm - Capacity 25 Kg honey
€5.90Price
ROUND CONICAL white plastic bucket - with LID pressure tight closure and safety tab - PLASTIC HANDLE FOR FOODS with MOK CertificateCapacity : 19.5 L - Diameter 32.3 cm - Capacity 25 Kg honey
ROUND CONICAL white plastic bucket - with LID pressure tight closure and safety tab - PLASTIC HANDLE FOR FOODS with MOK CertificateCapacity : 19.5 L - Diameter 32.3 cm - Capacity 25 Kg honey
€5.90Price
€4.80Price
PLASTIC PERFORATED SHEET FOR COLLECTING POLLEN with TRAPEZOID HOLES For pollen-collecting trap (art. QI T51L20)
€4.80Price
PLASTIC PERFORATED SHEET FOR COLLECTING POLLEN with TRAPEZOID HOLES For pollen-collecting trap (art. QI T51L20)
PLASTIC PERFORATED SHEET FOR COLLECTING POLLEN with TRAPEZOID HOLES For pollen-collecting trap (art. QI T51L20)
€4.80Price
€1.90Price
16-WAY PLASTIC APISCAMPO - Diameter 25.5 cm FOR PLASTIC APISCAMPO TABLE FOR D.B. 10 Beehives (art. QI 95) - without tablet FIXING SCREWS TO TABLE ON REQUEST OPTIONS : - WITHOUT FIXING SCREWS - WITH FIXING SCREWS
€1.90Price
16-WAY PLASTIC APISCAMPO - Diameter 25.5 cm FOR PLASTIC APISCAMPO TABLE FOR D.B. 10 Beehives (art. QI 95) - without tablet FIXING SCREWS TO TABLE ON REQUEST OPTIONS : - WITHOUT FIXING SCREWS - WITH FIXING SCREWS
16-WAY PLASTIC APISCAMPO - Diameter 25.5 cm FOR PLASTIC APISCAMPO TABLE FOR D.B. 10 Beehives (art. QI 95) - without tablet FIXING SCREWS TO TABLE ON REQUEST OPTIONS : - WITHOUT FIXING SCREWS - WITH FIXING SCREWS
€1.90Price
€2.90Price
Triangular metal color orientator, to be applied on front of Beehive, helps bees recognize their own of the Beehive. CAN BE COMBINED WITH MAGNETIC NUMBERS COLOR CHOICE : 3 COLORS (WHITE-BLUE-YELLOW) - UNIQUE COLOR: WHITE - BLUE - YELLOW Size: triangle sides 9.5 cm
€2.90Price
Triangular metal color orientator, to be applied on front of Beehive, helps bees recognize their own of the Beehive. CAN BE COMBINED WITH MAGNETIC NUMBERS COLOR CHOICE : 3 COLORS (WHITE-BLUE-YELLOW) - UNIQUE COLOR: WHITE - BLUE - YELLOW Size: triangle sides 9.5 cm
Triangular metal color orientator, to be applied on front of Beehive, helps bees recognize their own of the Beehive. CAN BE COMBINED WITH MAGNETIC NUMBERS COLOR CHOICE : 3 COLORS (WHITE-BLUE-YELLOW) - UNIQUE COLOR: WHITE - BLUE - YELLOW Size: triangle sides 9.5 cm
€2.90Price
Internal measurements: 380mm x 462mm h 245mm; External measurements: 430mm x 510mm h 245mm
€25.00Price
Internal measurements: 380mm x 462mm h 245mm; External measurements: 430mm x 510mm h 245mm
€25.00Price
€25.00Price
Nest Body or Honey super for Beehives Beehive 10 frames complete with 10-notch spacers and painted bottom spacer OPTIONS : - Frames not included - No. 10 Standard LANGSTROTH Frames - No. 10 Self Spacing LANGSTROTH Hoffman Frames - No. 10 Self Spacing LANGSTROTH Hoffman Frames in PLASTIC Available With or Without PAINTING
€25.00Price
Nest Body or Honey super for Beehives Beehive 10 frames complete with 10-notch spacers and painted bottom spacer OPTIONS : - Frames not included - No. 10 Standard LANGSTROTH Frames - No. 10 Self Spacing LANGSTROTH Hoffman Frames - No. 10 Self Spacing LANGSTROTH Hoffman Frames in PLASTIC Available With or Without PAINTING
Nest Body or Honey super for Beehives Beehive 10 frames complete with 10-notch spacers and painted bottom spacer OPTIONS : - Frames not included - No. 10 Standard LANGSTROTH Frames - No. 10 Self Spacing LANGSTROTH Hoffman Frames - No. 10 Self Spacing LANGSTROTH Hoffman Frames in PLASTIC Available With or Without PAINTING
€25.00Price
€0.55Price
ERGO 106 T70 Tall Glass Jar - 106 ml (glass only)
For CAPSULES:
- CLASSIC FLAT
-FLIP PASTEURIZATION
- FLIP STERILIZATION
H = 55 mm - Diam. = 73 mm - Weight 130 g
In a 24-piece heat-pack
€0.55Price
ERGO 106 T70 Tall Glass Jar - 106 ml (glass only)
For CAPSULES:
- CLASSIC FLAT
-FLIP PASTEURIZATION
- FLIP STERILIZATION
H = 55 mm - Diam. = 73 mm - Weight 130 g
In a 24-piece heat-pack
ERGO 106 T70 Tall Glass Jar - 106 ml (glass only)
For CAPSULES:
- CLASSIC FLAT
-FLIP PASTEURIZATION
- FLIP STERILIZATION
H = 55 mm - Diam. = 73 mm - Weight 130 g
In a 24-piece heat-pack
€0.55Price
€1.00Price
Suitable for direct food contact Measurements: 72 x 49 X 145 mm H ( EXCLUDING HANDLE ) (SEE QUANTITY DISCOUNT)
€1.00Price
Suitable for direct food contact Measurements: 72 x 49 X 145 mm H ( EXCLUDING HANDLE ) (SEE QUANTITY DISCOUNT)
Suitable for direct food contact Measurements: 72 x 49 X 145 mm H ( EXCLUDING HANDLE ) (SEE QUANTITY DISCOUNT)
€1.00Price
€77.00Price
NYLON CONICAL GEAR TRANSMISSION for Extractor Diam.: 520 mm (ALLOY or SIMILAR) Including pair of nylon bevel gears diam. 85 mm With Shaft diameter 14 mm and Bar 520 mm
€77.00Price
NYLON CONICAL GEAR TRANSMISSION for Extractor Diam.: 520 mm (ALLOY or SIMILAR) Including pair of nylon bevel gears diam. 85 mm With Shaft diameter 14 mm and Bar 520 mm
NYLON CONICAL GEAR TRANSMISSION for Extractor Diam.: 520 mm (ALLOY or SIMILAR) Including pair of nylon bevel gears diam. 85 mm With Shaft diameter 14 mm and Bar 520 mm
€77.00Price
Varroa i fights them more effectively by zeroing out the winter brood. From this observation comes the Menna cage, designed and patented by Vincenzo Menna: a practical device that promotes the queen's rest in the colder months, and that brings all the varroa present in the Beehive more easily out into the open. The period of use varies from northern to southern Italy, but indicatively the first days of November will be the most suitable to start caging, and mid to late January those for caging. Considering that a regular family goes into production in 60 to 70 days from the release of the queen, it will be up to the beekeeper to adjust the period.
€11.80Price
Varroa i fights them more effectively by zeroing out the winter brood. From this observation comes the Menna cage, designed and patented by Vincenzo Menna: a practical device that promotes the queen's rest in the colder months, and that brings all the varroa present in the Beehive more easily out into the open. The period of use varies from northern to southern Italy, but indicatively the first days of November will be the most suitable to start caging, and mid to late January those for caging. Considering that a regular family goes into production in 60 to 70 days from the release of the queen, it will be up to the beekeeper to adjust the period.
€11.80Price
€11.80Price
Plastic cage, D.B. nesting frame to lock the queen in the winter period Can also be used in the summer period Mounted on wooden frame - Dimensions: 36 (W) x 24 (H)cm - Facilitated introduction of the queen, without wax sheet - Allows the family to stop brooding
€11.80Price
Plastic cage, D.B. nesting frame to lock the queen in the winter period Can also be used in the summer period Mounted on wooden frame - Dimensions: 36 (W) x 24 (H)cm - Facilitated introduction of the queen, without wax sheet - Allows the family to stop brooding
Plastic cage, D.B. nesting frame to lock the queen in the winter period Can also be used in the summer period Mounted on wooden frame - Dimensions: 36 (W) x 24 (H)cm - Facilitated introduction of the queen, without wax sheet - Allows the family to stop brooding
€11.80Price
€1.60Price
HALF NEST D.B. FRAME with wire No. 2 HALF NEST D.B. FRAMES FORM A HALF NEST D.B. FRAME The price refers to half a frame. Dimensions: L=21.7 cm H=30 cm
€1.60Price
HALF NEST D.B. FRAME with wire No. 2 HALF NEST D.B. FRAMES FORM A HALF NEST D.B. FRAME The price refers to half a frame. Dimensions: L=21.7 cm H=30 cm
HALF NEST D.B. FRAME with wire No. 2 HALF NEST D.B. FRAMES FORM A HALF NEST D.B. FRAME The price refers to half a frame. Dimensions: L=21.7 cm H=30 cm
€1.60Price
€2.15Price
WHITE GLASS BOTTLE with cork h = 20 cm side to base = 7 cm Capacity: 200 ml
€2.15Price
WHITE GLASS BOTTLE with cork h = 20 cm side to base = 7 cm Capacity: 200 ml
WHITE GLASS BOTTLE with cork h = 20 cm side to base = 7 cm Capacity: 200 ml
€2.15Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€26.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€26.80Price
€26.80Price
Mold height: 75 mm - Wick: 3 mm - Weight: 45 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€26.80Price
Mold height: 75 mm - Wick: 3 mm - Weight: 45 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 75 mm - Wick: 3 mm - Weight: 45 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€26.80Price
€1.60Price
EXTENSIBLE CHINESE CAGE FOR BLOCKING COVATWith small door for introducing/closing the queen and possibility of sliding extension to increase the interior spaceDim: Width 3 cm x Length 5 up to 9 cm x thickness 1.8 cm
€1.60Price
EXTENSIBLE CHINESE CAGE FOR BLOCKING COVATWith small door for introducing/closing the queen and possibility of sliding extension to increase the interior spaceDim: Width 3 cm x Length 5 up to 9 cm x thickness 1.8 cm
EXTENSIBLE CHINESE CAGE FOR BLOCKING COVATWith small door for introducing/closing the queen and possibility of sliding extension to increase the interior spaceDim: Width 3 cm x Length 5 up to 9 cm x thickness 1.8 cm
€1.60Price
€54.00Price
FIXED STAINLESS STEEL REST for honey jars (to be mounted on the bottom)for Hot Air Honey Bottoms (Code QI F36)
€54.00Price
FIXED STAINLESS STEEL REST for honey jars (to be mounted on the bottom)for Hot Air Honey Bottoms (Code QI F36)
FIXED STAINLESS STEEL REST for honey jars (to be mounted on the bottom)for Hot Air Honey Bottoms (Code QI F36)
€54.00Price
€740.00Price
D.B. RADIAL EXTRACTOR with D.B. CONTROL by DRILL with STAINLESS STEEL basket for 20 Honey super frames or 4 nest frames - diameter 640 mm - total height 980 mm For nest frames need No. 4 additional cages (Cod. GN 160GND20) NOT INCLUDED YOU CAN APPLY A DRILL WITH POWER OF AT LEAST 500 W THAT MUST HAVE A MALE THREAD DIAMETER 11 mm (DRILL EXCLUDED FROM THE SUPPLY) New welded bottom that improves honey discharge with Ø 40 mm nylon CUT-OUT RUBBER
€740.00Price
D.B. RADIAL EXTRACTOR with D.B. CONTROL by DRILL with STAINLESS STEEL basket for 20 Honey super frames or 4 nest frames - diameter 640 mm - total height 980 mm For nest frames need No. 4 additional cages (Cod. GN 160GND20) NOT INCLUDED YOU CAN APPLY A DRILL WITH POWER OF AT LEAST 500 W THAT MUST HAVE A MALE THREAD DIAMETER 11 mm (DRILL EXCLUDED FROM THE SUPPLY) New welded bottom that improves honey discharge with Ø 40 mm nylon CUT-OUT RUBBER
D.B. RADIAL EXTRACTOR with D.B. CONTROL by DRILL with STAINLESS STEEL basket for 20 Honey super frames or 4 nest frames - diameter 640 mm - total height 980 mm For nest frames need No. 4 additional cages (Cod. GN 160GND20) NOT INCLUDED YOU CAN APPLY A DRILL WITH POWER OF AT LEAST 500 W THAT MUST HAVE A MALE THREAD DIAMETER 11 mm (DRILL EXCLUDED FROM THE SUPPLY) New welded bottom that improves honey discharge with Ø 40 mm nylon CUT-OUT RUBBER
€740.00Price
🐝 PROTECTION WITH VENTILATION - Australian Brand OZ ARMOR beekeeper smock is made with a triple-layer fabric mesh that allows air to circulate around the body while protecting against bee stings. It comes with the astronaut mask. 🐝 REDUCED RISK OF BEES - Compared to traditional masks, Oz Armor maintains a protective barrier against bees. Our veils have a patented insert on the inside of the hood, which pulls the mesh away from the face 🐝 EASY TO USE - Our suit has leg height zippers that make it easy to use and remove. Velcro and elastic bands on the ankles and wrists allow adjustment for maximum comfort, and the veils attach easily by covering the zippers. 🐝 DURABLE & LONG-LASTING - Designed to last for years, the mask of our clothing is made of sturdy wire mesh, plus the suit has rayon reinforcements for pockets and knee pads. 🐝 ADVANCED FEATURES - YKK zipper, double sliders on high leg zippers and front zippers for easy access to inside pockets. 12-MONTH WARRANTY.
€79.00Price
🐝 PROTECTION WITH VENTILATION - Australian Brand OZ ARMOR beekeeper smock is made with a triple-layer fabric mesh that allows air to circulate around the body while protecting against bee stings. It comes with the astronaut mask. 🐝 REDUCED RISK OF BEES - Compared to traditional masks, Oz Armor maintains a protective barrier against bees. Our veils have a patented insert on the inside of the hood, which pulls the mesh away from the face 🐝 EASY TO USE - Our suit has leg height zippers that make it easy to use and remove. Velcro and elastic bands on the ankles and wrists allow adjustment for maximum comfort, and the veils attach easily by covering the zippers. 🐝 DURABLE & LONG-LASTING - Designed to last for years, the mask of our clothing is made of sturdy wire mesh, plus the suit has rayon reinforcements for pockets and knee pads. 🐝 ADVANCED FEATURES - YKK zipper, double sliders on high leg zippers and front zippers for easy access to inside pockets. 12-MONTH WARRANTY.
€79.00Price
€79.00Price
OZ ARMOR Double-layer Air Mesh Jacket The main feature of double-layer air mesh clothing is light weight (2 layers of lightweight and super strong breathable mesh).The first layer of mesh is made of poly cotton. The second layer is made of EVA foam.The jacket has a detachable astronaut mask.
Color: WHITE.
With front zipper and zipper to completely detach the mask.
Stiff cotton elastic cuffs, thumb rest and 4 large front pockets
Available size: S M L XL XXL
€79.00Price
OZ ARMOR Double-layer Air Mesh Jacket The main feature of double-layer air mesh clothing is light weight (2 layers of lightweight and super strong breathable mesh).The first layer of mesh is made of poly cotton. The second layer is made of EVA foam.The jacket has a detachable astronaut mask.
Color: WHITE.
With front zipper and zipper to completely detach the mask.
Stiff cotton elastic cuffs, thumb rest and 4 large front pockets
Available size: S M L XL XXL
OZ ARMOR Double-layer Air Mesh Jacket The main feature of double-layer air mesh clothing is light weight (2 layers of lightweight and super strong breathable mesh).The first layer of mesh is made of poly cotton. The second layer is made of EVA foam.The jacket has a detachable astronaut mask.
Color: WHITE.
With front zipper and zipper to completely detach the mask.
Stiff cotton elastic cuffs, thumb rest and 4 large front pockets
Available size: S M L XL XXL
€79.00Price
€3.50Price
SELF-ADHESIVE LABEL - GUARANTEE SEAL - ITALIAN HONEY - CONF. OF 100 PIECES For 1 kg and 500 g honey jars DIM: 114 x 25 mm
€3.50Price
SELF-ADHESIVE LABEL - GUARANTEE SEAL - ITALIAN HONEY - CONF. OF 100 PIECES For 1 kg and 500 g honey jars DIM: 114 x 25 mm
SELF-ADHESIVE LABEL - GUARANTEE SEAL - ITALIAN HONEY - CONF. OF 100 PIECES For 1 kg and 500 g honey jars DIM: 114 x 25 mm
€3.50Price
€17.00Price
Photographic POSTER "Pollen and Honey," made of plasticized cardboard, printed in color, complete with metal stick with hanger. Size: 60 x 90 cm
€17.00Price
Photographic POSTER "Pollen and Honey," made of plasticized cardboard, printed in color, complete with metal stick with hanger. Size: 60 x 90 cm
Photographic POSTER "Pollen and Honey," made of plasticized cardboard, printed in color, complete with metal stick with hanger. Size: 60 x 90 cm
€17.00Price
Beehives D.B. Standard 7-frame Beehive made of 25 mm thick wood, nest only, complete with high honeycomb cover with 4-position disc, electro-welded galvanized sheet metal roof, anti-moth net bottom, galvanized sheet metal tray, transport template, handles, corners, metal door. Painted with environmentally friendly water-based paint.
€85.00Price
Beehives D.B. Standard 7-frame Beehive made of 25 mm thick wood, nest only, complete with high honeycomb cover with 4-position disc, electro-welded galvanized sheet metal roof, anti-moth net bottom, galvanized sheet metal tray, transport template, handles, corners, metal door. Painted with environmentally friendly water-based paint.
€85.00Price
€85.00Price
Beehives Dadant Blatt Standard 7-frame beehive made of 25mm thick water-painted wood. Nest only (frames not included) Made in ITALY (TRENTINO pine) (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€85.00Price
Beehives Dadant Blatt Standard 7-frame beehive made of 25mm thick water-painted wood. Nest only (frames not included) Made in ITALY (TRENTINO pine) (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehives Dadant Blatt Standard 7-frame beehive made of 25mm thick water-painted wood. Nest only (frames not included) Made in ITALY (TRENTINO pine) (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€85.00Price
€1.60Price
No.1 ONE HALF D.B. MOULIN DADANT B with thread (HOFFMAN) Suitable for queen fertilization Nucleus hives (PI 45/FF - PI 45/F1 - PI 748) 2 HALF D.B. MOULIN DADANT B. MOULIN HALF MOULIN DADANT B. FROM HONEY super Dimensions of 1 piece: L=22 cm H=16 cm - Hoffman side 37 mm Price is for a mini-frame
€1.60Price
No.1 ONE HALF D.B. MOULIN DADANT B with thread (HOFFMAN) Suitable for queen fertilization Nucleus hives (PI 45/FF - PI 45/F1 - PI 748) 2 HALF D.B. MOULIN DADANT B. MOULIN HALF MOULIN DADANT B. FROM HONEY super Dimensions of 1 piece: L=22 cm H=16 cm - Hoffman side 37 mm Price is for a mini-frame
No.1 ONE HALF D.B. MOULIN DADANT B with thread (HOFFMAN) Suitable for queen fertilization Nucleus hives (PI 45/FF - PI 45/F1 - PI 748) 2 HALF D.B. MOULIN DADANT B. MOULIN HALF MOULIN DADANT B. FROM HONEY super Dimensions of 1 piece: L=22 cm H=16 cm - Hoffman side 37 mm Price is for a mini-frame
€1.60Price
€460.00Price
Professional stainless steel food dryer with horizontal flow, with 6 stainless steel drawers FOR DRYING : POLLEN, FRUIT AND VEGETABLES Manual temperature adjustment or with preset programs for each type of foodAlim. 220V/50 Hz - 550W - Capacity 3.5 Kg External dimensions : 27 x 27 x length 45 cm - Weight : 7 Kg WARRANTY : 24 Months
€460.00Price
Professional stainless steel food dryer with horizontal flow, with 6 stainless steel drawers FOR DRYING : POLLEN, FRUIT AND VEGETABLES Manual temperature adjustment or with preset programs for each type of foodAlim. 220V/50 Hz - 550W - Capacity 3.5 Kg External dimensions : 27 x 27 x length 45 cm - Weight : 7 Kg WARRANTY : 24 Months
Professional stainless steel food dryer with horizontal flow, with 6 stainless steel drawers FOR DRYING : POLLEN, FRUIT AND VEGETABLES Manual temperature adjustment or with preset programs for each type of foodAlim. 220V/50 Hz - 550W - Capacity 3.5 Kg External dimensions : 27 x 27 x length 45 cm - Weight : 7 Kg WARRANTY : 24 Months
€460.00Price
High efficiency and low consumption heating element only 250W!!! Rapid liquefaction without altering the physical and microbiological properties of honey. Easy to use. Just lay it on the surface of the honey in the ripener or bucket. No adjustments needed. Precise electrical control Maintains constant temperature at 38°C at all times Sturdy heating body superior to classic serpentine honey melters, this allows you to be able to stir and thus decrease liquefaction time Transparent PET protective lid to safeguard honey during liquefaction from impurities and dust Suitable for all ripeners. 220 V power supply
€490.00Price
High efficiency and low consumption heating element only 250W!!! Rapid liquefaction without altering the physical and microbiological properties of honey. Easy to use. Just lay it on the surface of the honey in the ripener or bucket. No adjustments needed. Precise electrical control Maintains constant temperature at 38°C at all times Sturdy heating body superior to classic serpentine honey melters, this allows you to be able to stir and thus decrease liquefaction time Transparent PET protective lid to safeguard honey during liquefaction from impurities and dust Suitable for all ripeners. 220 V power supply
€490.00Price
€490.00Price
0New innovative system equipped with food grade aluminum heat sink with automatic temperature control. High heat conduction Low power consumption
€490.00Price
0New innovative system equipped with food grade aluminum heat sink with automatic temperature control. High heat conduction Low power consumption
0New innovative system equipped with food grade aluminum heat sink with automatic temperature control. High heat conduction Low power consumption
€490.00Price
€8.00Price
Wood screw - galvanized steel - 4.0 x 40/26 mm - Length 40 mm - Half thread - countersunk flat head - TORX TX15 screwdriver socket For Beehives and Honey super bottom and wall assembly (Conf. box of 500 pcs.)
€8.00Price
Wood screw - galvanized steel - 4.0 x 40/26 mm - Length 40 mm - Half thread - countersunk flat head - TORX TX15 screwdriver socket For Beehives and Honey super bottom and wall assembly (Conf. box of 500 pcs.)
Wood screw - galvanized steel - 4.0 x 40/26 mm - Length 40 mm - Half thread - countersunk flat head - TORX TX15 screwdriver socket For Beehives and Honey super bottom and wall assembly (Conf. box of 500 pcs.)
€8.00Price
€42.00Price
Compact cotton jacket with front zipper for full jacket opening and circular terry collar for attaching aluminum mesh square veil detachable by elastic band.
Cuffs with elastic bands.
Square mask included.
Size available S-M-L-XL-XXL-XXXL
Square mask replacement: (Code FO 4210)
€42.00Price
Compact cotton jacket with front zipper for full jacket opening and circular terry collar for attaching aluminum mesh square veil detachable by elastic band.
Cuffs with elastic bands.
Square mask included.
Size available S-M-L-XL-XXL-XXXL
Square mask replacement: (Code FO 4210)
Compact cotton jacket with front zipper for full jacket opening and circular terry collar for attaching aluminum mesh square veil detachable by elastic band.
Cuffs with elastic bands.
Square mask included.
Size available S-M-L-XL-XXL-XXXL
Square mask replacement: (Code FO 4210)
€42.00Price
€26.80Price
D.B. 10-frame Nicot plastic honeycomb honeycomb super.
€26.80Price
D.B. 10-frame Nicot plastic honeycomb honeycomb super.
D.B. 10-frame Nicot plastic honeycomb honeycomb super.
€26.80Price
€58.00Price
Beekeeper coverallin cotton with front zipper and circular terrycloth collar for attaching square aluminum mesh mask detachable by elastic band
Cuffs with elastic bands
Available size: S-M-L-XL-XXL-XXXL
Mask round included Round mask replacement (FO 4220)
€58.00Price
Beekeeper coverallin cotton with front zipper and circular terrycloth collar for attaching square aluminum mesh mask detachable by elastic band
Cuffs with elastic bands
Available size: S-M-L-XL-XXL-XXXL
Mask round included Round mask replacement (FO 4220)
Beekeeper coverallin cotton with front zipper and circular terrycloth collar for attaching square aluminum mesh mask detachable by elastic band
Cuffs with elastic bands
Available size: S-M-L-XL-XXL-XXXL
Mask round included Round mask replacement (FO 4220)
€58.00Price
€125.00Price
FOOD PLASTIC 400 kg HONEY MATURATOR with lid and tap Dim: 76 cm diameter - 89 cm height NYLON CUT TAP 40 mm Volume 300 liters
€125.00Price
FOOD PLASTIC 400 kg HONEY MATURATOR with lid and tap Dim: 76 cm diameter - 89 cm height NYLON CUT TAP 40 mm Volume 300 liters
FOOD PLASTIC 400 kg HONEY MATURATOR with lid and tap Dim: 76 cm diameter - 89 cm height NYLON CUT TAP 40 mm Volume 300 liters
€125.00Price
- Possibility of inserting up to 5 slats (STECCA Cod. QI S144)
€13.80Price
- Possibility of inserting up to 5 slats (STECCA Cod. QI S144)
€13.80Price
€13.80Price
CUE HOLDER with feeder - STAINLESS steel frame - Removable stainless steel splints - 1 L plastic feeder with drowning-saving net - No. 3 stainless steel splints easy to attach to the splint holder - The splint has a guide for inserting NICOT's NICOT holder fixing blocks (Code HY G-0007) NOT INCLUDED
€13.80Price
CUE HOLDER with feeder - STAINLESS steel frame - Removable stainless steel splints - 1 L plastic feeder with drowning-saving net - No. 3 stainless steel splints easy to attach to the splint holder - The splint has a guide for inserting NICOT's NICOT holder fixing blocks (Code HY G-0007) NOT INCLUDED
CUE HOLDER with feeder - STAINLESS steel frame - Removable stainless steel splints - 1 L plastic feeder with drowning-saving net - No. 3 stainless steel splints easy to attach to the splint holder - The splint has a guide for inserting NICOT's NICOT holder fixing blocks (Code HY G-0007) NOT INCLUDED
€13.80Price
€28.00Price
Galvanized smoker complete with anti-scald protection Suede and wood mantle Diameter 10 cm
€28.00Price
Galvanized smoker complete with anti-scald protection Suede and wood mantle Diameter 10 cm
Galvanized smoker complete with anti-scald protection Suede and wood mantle Diameter 10 cm
€28.00Price
Beehive D.B. 8 FAVI only STANDARD nest with movable antivarroa net bottom. Nest-cover with 4-position disk mounted-cover in galvanized sheet 10 cm high-wood-lined and faestile on the bottom-roof the galvanized sheet-.plastic transport mask-girand galvanized-metal door-3 angles from connection-spacers mounted in the nest bottom mobile anti-varroa net with bottom in galvanized sheet removable from the back-woods in seasoned fir, thickness 25mm-walls assembled with screws - Handles for transport - Frame rest Painted
€90.00Price
Beehive D.B. 8 FAVI only STANDARD nest with movable antivarroa net bottom. Nest-cover with 4-position disk mounted-cover in galvanized sheet 10 cm high-wood-lined and faestile on the bottom-roof the galvanized sheet-.plastic transport mask-girand galvanized-metal door-3 angles from connection-spacers mounted in the nest bottom mobile anti-varroa net with bottom in galvanized sheet removable from the back-woods in seasoned fir, thickness 25mm-walls assembled with screws - Handles for transport - Frame rest Painted
€90.00Price
€90.00Price
Beehives D.B. 8 BEEHIVES STANDARD nest only with fixed anti-varroa net bottom - FRAMES NOT INCLUDED (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€90.00Price
Beehives D.B. 8 BEEHIVES STANDARD nest only with fixed anti-varroa net bottom - FRAMES NOT INCLUDED (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehives D.B. 8 BEEHIVES STANDARD nest only with fixed anti-varroa net bottom - FRAMES NOT INCLUDED (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€90.00Price
€0.85Price
SQUEEZER KEOP food-grade plastic 180 ml dispenser for 250 g of HONEY - Mouth diameter 31 mm Screw cap dispenser BRONZE color (Code BC 03 ORA) DISPENSER equipped with flip-flop screw cap with ANTI-GOATING silicone valve and safety inner liner (LINER) Italian and European made material with food certification.
€0.85Price
SQUEEZER KEOP food-grade plastic 180 ml dispenser for 250 g of HONEY - Mouth diameter 31 mm Screw cap dispenser BRONZE color (Code BC 03 ORA) DISPENSER equipped with flip-flop screw cap with ANTI-GOATING silicone valve and safety inner liner (LINER) Italian and European made material with food certification.
SQUEEZER KEOP food-grade plastic 180 ml dispenser for 250 g of HONEY - Mouth diameter 31 mm Screw cap dispenser BRONZE color (Code BC 03 ORA) DISPENSER equipped with flip-flop screw cap with ANTI-GOATING silicone valve and safety inner liner (LINER) Italian and European made material with food certification.
€0.85Price
€90.00Price
Chrome-plated TANGENTIAL BOWL for FALCO honey extractor for 4 nest frames or 8 Honey super frames DADANT - Extractor diameter 630 mm - pin hole diameter 14 mm
€90.00Price
Chrome-plated TANGENTIAL BOWL for FALCO honey extractor for 4 nest frames or 8 Honey super frames DADANT - Extractor diameter 630 mm - pin hole diameter 14 mm
Chrome-plated TANGENTIAL BOWL for FALCO honey extractor for 4 nest frames or 8 Honey super frames DADANT - Extractor diameter 630 mm - pin hole diameter 14 mm
€90.00Price
€7.80Price
TEDESCA propolis collection net made of food-grade, malleable and durable silicone for 10-frame D.B. Beehives- cm 43 x 50
€7.80Price
TEDESCA propolis collection net made of food-grade, malleable and durable silicone for 10-frame D.B. Beehives- cm 43 x 50
TEDESCA propolis collection net made of food-grade, malleable and durable silicone for 10-frame D.B. Beehives- cm 43 x 50
€7.80Price
€1.47Price
BOTTLE : 50 ml - Ø 38.8 mm - h 87.0 mm - Mouth PFP 18 NASAL SPRAY 50 ml - draw straw 5 cm Package in thermopack of 77 pieces - SEE QUANTITY DISCOUNT
€1.47Price
BOTTLE : 50 ml - Ø 38.8 mm - h 87.0 mm - Mouth PFP 18 NASAL SPRAY 50 ml - draw straw 5 cm Package in thermopack of 77 pieces - SEE QUANTITY DISCOUNT
BOTTLE : 50 ml - Ø 38.8 mm - h 87.0 mm - Mouth PFP 18 NASAL SPRAY 50 ml - draw straw 5 cm Package in thermopack of 77 pieces - SEE QUANTITY DISCOUNT
€1.47Price
€21.00Price
€21.00Price
Round axillary hat mask made of tulle voile.
Underarm elastics to secure the mask over any garment.
Lightweight mask to make the heat more bearable.
€21.00Price
Round axillary hat mask made of tulle voile.
Underarm elastics to secure the mask over any garment.
Lightweight mask to make the heat more bearable.
Round axillary hat mask made of tulle voile.
Underarm elastics to secure the mask over any garment.
Lightweight mask to make the heat more bearable.
€21.00Price
Nesting wax sheet sizes Dadant B. obtained by melting PURE OPERATING WAX - 110 g per sheet -
€2.10Price
Nesting wax sheet sizes Dadant B. obtained by melting PURE OPERATING WAX - 110 g per sheet -
€2.10Price
€2.10Price
Dadant B. nest wax sheets obtained by casting PURE OPERATION - 110 g per sheet Dim. sheet 41 x 26 cm PROVENANCE : ITALY
€2.10Price
Dadant B. nest wax sheets obtained by casting PURE OPERATION - 110 g per sheet Dim. sheet 41 x 26 cm PROVENANCE : ITALY
Dadant B. nest wax sheets obtained by casting PURE OPERATION - 110 g per sheet Dim. sheet 41 x 26 cm PROVENANCE : ITALY
€2.10Price
€630.00Price
With stainless steel basket for 12 Honey super frames or 3 nest frames DADANT Ø 520 mm - 40 mm plastic cut-off tap - Full drain bottom No. 3 removable painted legs and hinged transparent lid For nest frames additional panels are needed (Code LA 4790) NOT INCLUDED OPTION : - NYLON CONICAL GEAR TRANSMISSION - HELICOIDAL GEAR TRANSMISSION
€630.00Price
With stainless steel basket for 12 Honey super frames or 3 nest frames DADANT Ø 520 mm - 40 mm plastic cut-off tap - Full drain bottom No. 3 removable painted legs and hinged transparent lid For nest frames additional panels are needed (Code LA 4790) NOT INCLUDED OPTION : - NYLON CONICAL GEAR TRANSMISSION - HELICOIDAL GEAR TRANSMISSION
With stainless steel basket for 12 Honey super frames or 3 nest frames DADANT Ø 520 mm - 40 mm plastic cut-off tap - Full drain bottom No. 3 removable painted legs and hinged transparent lid For nest frames additional panels are needed (Code LA 4790) NOT INCLUDED OPTION : - NYLON CONICAL GEAR TRANSMISSION - HELICOIDAL GEAR TRANSMISSION
€630.00Price
With removable tray , possibility to keep bee passage open even with trap mounted , hole for drones passage
€35.00Price
With removable tray , possibility to keep bee passage open even with trap mounted , hole for drones passage
€35.00Price
€35.00Price
POLLEN CATCHER TRAP TO INSERT ON THE FRONT OF THE 'BEEHIVE ! FOR D.B. CUBE BEEHIVE ! 6 HIVES Easy attachment with GIRL provided - Trap made of fir wood - Lid made of waterproof plywood - Grid with plastic pollen-collecting holes with adjustable Open/Closed bee passage (held open allows free passage of bees) - Net at the bottom (pollen fall into the tray) made of stainless steel - Removable pollen storage tray, made of wood on 4 sides and with stainless steel bottom net - Side holes for drones passage (with tab to keep them open or closed)
€35.00Price
POLLEN CATCHER TRAP TO INSERT ON THE FRONT OF THE 'BEEHIVE ! FOR D.B. CUBE BEEHIVE ! 6 HIVES Easy attachment with GIRL provided - Trap made of fir wood - Lid made of waterproof plywood - Grid with plastic pollen-collecting holes with adjustable Open/Closed bee passage (held open allows free passage of bees) - Net at the bottom (pollen fall into the tray) made of stainless steel - Removable pollen storage tray, made of wood on 4 sides and with stainless steel bottom net - Side holes for drones passage (with tab to keep them open or closed)
POLLEN CATCHER TRAP TO INSERT ON THE FRONT OF THE 'BEEHIVE ! FOR D.B. CUBE BEEHIVE ! 6 HIVES Easy attachment with GIRL provided - Trap made of fir wood - Lid made of waterproof plywood - Grid with plastic pollen-collecting holes with adjustable Open/Closed bee passage (held open allows free passage of bees) - Net at the bottom (pollen fall into the tray) made of stainless steel - Removable pollen storage tray, made of wood on 4 sides and with stainless steel bottom net - Side holes for drones passage (with tab to keep them open or closed)
€35.00Price
€75.00Price
DC/AC POWER INVERTER for SUBLIMOX SUBLIMOX Inverter 12 V DC --> 230 V AC - 300 W Suitable for powering the SUBLIMOX by having 12 V= from a car battery or cigarette lighter The KIT includes : n.1 Inverter 12V=/220V-50 Hz - 300W n.1 Set of electric cables with clamps for 12V battery= n.1 Set of electric cables for 12V car cigarette lighter 12V= With USB connection
€75.00Price
DC/AC POWER INVERTER for SUBLIMOX SUBLIMOX Inverter 12 V DC --> 230 V AC - 300 W Suitable for powering the SUBLIMOX by having 12 V= from a car battery or cigarette lighter The KIT includes : n.1 Inverter 12V=/220V-50 Hz - 300W n.1 Set of electric cables with clamps for 12V battery= n.1 Set of electric cables for 12V car cigarette lighter 12V= With USB connection
DC/AC POWER INVERTER for SUBLIMOX SUBLIMOX Inverter 12 V DC --> 230 V AC - 300 W Suitable for powering the SUBLIMOX by having 12 V= from a car battery or cigarette lighter The KIT includes : n.1 Inverter 12V=/220V-50 Hz - 300W n.1 Set of electric cables with clamps for 12V battery= n.1 Set of electric cables for 12V car cigarette lighter 12V= With USB connection
€75.00Price
[img-3714-left-thickbox_default] [img-3715-left-thickbox_default]
€8.00Price
[img-3714-left-thickbox_default] [img-3715-left-thickbox_default]
€8.00Price
€8.00Price
hornet trap - POWERFUL VELUTINE WASP EXCAVE QUICK AND EASY TO PREPARE NOT INCLUDED: all-natural, insecticide-free wasp attractant liquid. (SEE ATTACHED DOCUMENTS FOR INSTRUCTIONS FOR USE)
€8.00Price
hornet trap - POWERFUL VELUTINE WASP EXCAVE QUICK AND EASY TO PREPARE NOT INCLUDED: all-natural, insecticide-free wasp attractant liquid. (SEE ATTACHED DOCUMENTS FOR INSTRUCTIONS FOR USE)
hornet trap - POWERFUL VELUTINE WASP EXCAVE QUICK AND EASY TO PREPARE NOT INCLUDED: all-natural, insecticide-free wasp attractant liquid. (SEE ATTACHED DOCUMENTS FOR INSTRUCTIONS FOR USE)
€8.00Price
€0.83Price
BROWN CARDBOARD BOX for packing and transporting 20 250 g HONEY JARS or 212 ml GLASS JARS With internal separators - Dimensions: 34 x 14 x h 19 cm
€0.83Price
BROWN CARDBOARD BOX for packing and transporting 20 250 g HONEY JARS or 212 ml GLASS JARS With internal separators - Dimensions: 34 x 14 x h 19 cm
BROWN CARDBOARD BOX for packing and transporting 20 250 g HONEY JARS or 212 ml GLASS JARS With internal separators - Dimensions: 34 x 14 x h 19 cm
€0.83Price
USE DOSAGE: Dilute 20 ml of product in 500 ml of sugar syrup. Mix well before inserting into the Beehive by means of the feeder. Repeat feeding at least 3 times weekly during the spring and autumn periods with average seasonal temperatures above 12°C.
€21.00Price
USE DOSAGE: Dilute 20 ml of product in 500 ml of sugar syrup. Mix well before inserting into the Beehive by means of the feeder. Repeat feeding at least 3 times weekly during the spring and autumn periods with average seasonal temperatures above 12°C.
€21.00Price
€21.00Price
COMPOSITION: 5% essential oil of savory, 20% polysorbate 20 (Sorbitan monolaurate) Complementary feed for bees based on essential oil of savory (Satureya hortensis) in an aqueous solution to be added to normal liquid sugar feed as nutritional support to weakened Beehives exhibiting the phenomenon of calcified brood. (see in the ALLEGED DOCUMENTS section)
€21.00Price
COMPOSITION: 5% essential oil of savory, 20% polysorbate 20 (Sorbitan monolaurate) Complementary feed for bees based on essential oil of savory (Satureya hortensis) in an aqueous solution to be added to normal liquid sugar feed as nutritional support to weakened Beehives exhibiting the phenomenon of calcified brood. (see in the ALLEGED DOCUMENTS section)
COMPOSITION: 5% essential oil of savory, 20% polysorbate 20 (Sorbitan monolaurate) Complementary feed for bees based on essential oil of savory (Satureya hortensis) in an aqueous solution to be added to normal liquid sugar feed as nutritional support to weakened Beehives exhibiting the phenomenon of calcified brood. (see in the ALLEGED DOCUMENTS section)
€21.00Price
iN GLASS PASSED BOTTLE 720 ml with TWIST-OFF CAP T53 (53 mm)
€0.69Price
iN GLASS PASSED BOTTLE 720 ml with TWIST-OFF CAP T53 (53 mm)
€0.69Price
€0.69Price
PASSED GLASS BOTTLE 720 ml with TWIST-OFF CAP To 53 (53 mm) Packaged in thermopack of 18 pieces h = 219 mm diam = 78 mm weight = 300 g (The quantity ordered refers to individual jars, not thermopacks)
€0.69Price
PASSED GLASS BOTTLE 720 ml with TWIST-OFF CAP To 53 (53 mm) Packaged in thermopack of 18 pieces h = 219 mm diam = 78 mm weight = 300 g (The quantity ordered refers to individual jars, not thermopacks)
PASSED GLASS BOTTLE 720 ml with TWIST-OFF CAP To 53 (53 mm) Packaged in thermopack of 18 pieces h = 219 mm diam = 78 mm weight = 300 g (The quantity ordered refers to individual jars, not thermopacks)
€0.69Price
€18.90Price
Complete replacement BUTTON for "Ferret" vaporizer
€18.90Price
Complete replacement BUTTON for "Ferret" vaporizer
Complete replacement BUTTON for "Ferret" vaporizer
€18.90Price
€1.60Price
BOTTLE : 15 ml - Ø 28.5 mm - h 61.30 mm - Mouth PFP 18 LONG RECLINING LARGE SPRAY - draw straw 5 cm Packaged in thermopack of 170 pieces - SEE Quantity Discount
€1.60Price
BOTTLE : 15 ml - Ø 28.5 mm - h 61.30 mm - Mouth PFP 18 LONG RECLINING LARGE SPRAY - draw straw 5 cm Packaged in thermopack of 170 pieces - SEE Quantity Discount
BOTTLE : 15 ml - Ø 28.5 mm - h 61.30 mm - Mouth PFP 18 LONG RECLINING LARGE SPRAY - draw straw 5 cm Packaged in thermopack of 170 pieces - SEE Quantity Discount
€1.60Price
€1.62Price
BOTTLE : 30 ml - Ø 34 mm - h 73.2 mm - Mouth PFP 18 LARINGEAN NEBULIZER SPRAY RECLINING LONG 30 ml - draw straw 5 cm Packaged in thermopack of 104 pieces
€1.62Price
BOTTLE : 30 ml - Ø 34 mm - h 73.2 mm - Mouth PFP 18 LARINGEAN NEBULIZER SPRAY RECLINING LONG 30 ml - draw straw 5 cm Packaged in thermopack of 104 pieces
BOTTLE : 30 ml - Ø 34 mm - h 73.2 mm - Mouth PFP 18 LARINGEAN NEBULIZER SPRAY RECLINING LONG 30 ml - draw straw 5 cm Packaged in thermopack of 104 pieces
€1.62Price
€1.62Price
BOTTLE : 20 ml - Ø 30 mm - h 67.7 mm - Mouth PFP 18 LARINGEAN LONG RECLINING SPRAY 20 ml - draft straw 5 cm Packaged in thermopack of 135 pieces .
€1.62Price
BOTTLE : 20 ml - Ø 30 mm - h 67.7 mm - Mouth PFP 18 LARINGEAN LONG RECLINING SPRAY 20 ml - draft straw 5 cm Packaged in thermopack of 135 pieces .
BOTTLE : 20 ml - Ø 30 mm - h 67.7 mm - Mouth PFP 18 LARINGEAN LONG RECLINING SPRAY 20 ml - draft straw 5 cm Packaged in thermopack of 135 pieces .
€1.62Price
€1.10Price
BOTTLE : 125 mL - Ø 49.5 mm - h 132.5 mm - Mouth PFP 28 CONTAINER 100 mL PFP 28 suitable for 125 mL bottle WITH SAFETY BAND FOR INTEGRITY PACKING
€1.10Price
BOTTLE : 125 mL - Ø 49.5 mm - h 132.5 mm - Mouth PFP 28 CONTAINER 100 mL PFP 28 suitable for 125 mL bottle WITH SAFETY BAND FOR INTEGRITY PACKING
BOTTLE : 125 mL - Ø 49.5 mm - h 132.5 mm - Mouth PFP 28 CONTAINER 100 mL PFP 28 suitable for 125 mL bottle WITH SAFETY BAND FOR INTEGRITY PACKING
€1.10Price
€1.48Price
BOTTLE : 50 ml - Ø 38 mm - h 93.3 mm - Mouth GL 18 CONTAINER 50 ml WITH SAFETY SEAL FOR INTEGRITY PACKAGING Packaged in thermopack of 100 pieces - See Discount Quantity
€1.48Price
BOTTLE : 50 ml - Ø 38 mm - h 93.3 mm - Mouth GL 18 CONTAINER 50 ml WITH SAFETY SEAL FOR INTEGRITY PACKAGING Packaged in thermopack of 100 pieces - See Discount Quantity
BOTTLE : 50 ml - Ø 38 mm - h 93.3 mm - Mouth GL 18 CONTAINER 50 ml WITH SAFETY SEAL FOR INTEGRITY PACKAGING Packaged in thermopack of 100 pieces - See Discount Quantity
€1.48Price
Physico-chemical analysis °Brix 77.8 pH 4 HMF(ppm) 3.2 Sugar composition : Fructose 35(% of dry matter) Glucose 35 (% of dry matter) Sucrose 30 (% of dry matter)
€21.50Price
Physico-chemical analysis °Brix 77.8 pH 4 HMF(ppm) 3.2 Sugar composition : Fructose 35(% of dry matter) Glucose 35 (% of dry matter) Sucrose 30 (% of dry matter)
€21.50Price
€21.50Price
High-fructose "FRUTTOSWEET SUGAR" SYRUP - RAW MATERIAL FOR FEEDING PACKAGE 10 kg containing 4 pouches of 2.5 kg Composition: fructose, glucose syrup, sugar syrup, preservative additive: E202-potassium sorbate Analytical constituents: total sugars 71.4%, moisture: 27%, crude protein 0%, crude fiber 0%, crude oils and fats 0%, crude ash 0%, sodium 0%
€21.50Price
High-fructose "FRUTTOSWEET SUGAR" SYRUP - RAW MATERIAL FOR FEEDING PACKAGE 10 kg containing 4 pouches of 2.5 kg Composition: fructose, glucose syrup, sugar syrup, preservative additive: E202-potassium sorbate Analytical constituents: total sugars 71.4%, moisture: 27%, crude protein 0%, crude fiber 0%, crude oils and fats 0%, crude ash 0%, sodium 0%
High-fructose "FRUTTOSWEET SUGAR" SYRUP - RAW MATERIAL FOR FEEDING PACKAGE 10 kg containing 4 pouches of 2.5 kg Composition: fructose, glucose syrup, sugar syrup, preservative additive: E202-potassium sorbate Analytical constituents: total sugars 71.4%, moisture: 27%, crude protein 0%, crude fiber 0%, crude oils and fats 0%, crude ash 0%, sodium 0%
€21.50Price