€4,350.00Regular price-€450.00€4,800.00Price
Special Products
Featured Products
Subcategory
€2.60Price
WHITE GLASS BOTTLE with SQUARE BASE low with Cork stopper Capacity: 250 ml
€2.60Price
WHITE GLASS BOTTLE with SQUARE BASE low with Cork stopper Capacity: 250 ml
WHITE GLASS BOTTLE with SQUARE BASE low with Cork stopper Capacity: 250 ml
€2.60Price
€45.00Price
Honey super Dadant B. Wax sheets obtained by PURO OPERCOLO fusion - 55 g per sheet - Boxed 2.5 kg - 46 sheets approx. - Sheet size 41 x 12.7 cm PROVENANCE : ITALY
€45.00Price
Honey super Dadant B. Wax sheets obtained by PURO OPERCOLO fusion - 55 g per sheet - Boxed 2.5 kg - 46 sheets approx. - Sheet size 41 x 12.7 cm PROVENANCE : ITALY
Honey super Dadant B. Wax sheets obtained by PURO OPERCOLO fusion - 55 g per sheet - Boxed 2.5 kg - 46 sheets approx. - Sheet size 41 x 12.7 cm PROVENANCE : ITALY
€45.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€49.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€49.00Price
€49.00Price
Mold height: 95 mm - Wick: 3 mm - Weight: 125 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€49.00Price
Mold height: 95 mm - Wick: 3 mm - Weight: 125 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 95 mm - Wick: 3 mm - Weight: 125 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€49.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€34.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€34.00Price
€34.00Price
Silicone candle mold with cylinder with braided rope Mold height: 70 mm - Diameter: 60 mm - Wick: 3 mm - Weight 170 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€34.00Price
Silicone candle mold with cylinder with braided rope Mold height: 70 mm - Diameter: 60 mm - Wick: 3 mm - Weight 170 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle mold with cylinder with braided rope Mold height: 70 mm - Diameter: 60 mm - Wick: 3 mm - Weight 170 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€34.00Price
WHEN TO USE Stimulant for family development at spring resumption and before main blooms. Queen laying stimulant Pollen replacement in times of crop shortages Late summer/early fall to ensure reserve protein and vitamin requirements during winter and to lengthen brood rearing period Ideal for preparing swarms, bee packs and fertilization nuclei and for queen rearing. DOSAGE 10 ml of SUPERBEE in 1 L of sugar syrup ADVANTAGES High palatability of the liquid formulation Contains all essential amino acids and vitamins for bee development Easily mixed and therefore usable with any type of carbohydrate syrup GMO FREE protein and vitamin components
€20.00Price
WHEN TO USE Stimulant for family development at spring resumption and before main blooms. Queen laying stimulant Pollen replacement in times of crop shortages Late summer/early fall to ensure reserve protein and vitamin requirements during winter and to lengthen brood rearing period Ideal for preparing swarms, bee packs and fertilization nuclei and for queen rearing. DOSAGE 10 ml of SUPERBEE in 1 L of sugar syrup ADVANTAGES High palatability of the liquid formulation Contains all essential amino acids and vitamins for bee development Easily mixed and therefore usable with any type of carbohydrate syrup GMO FREE protein and vitamin components
€20.00Price
€20.00Price
SUPERBEE is a liquid complementary feed consisting of a complete mixture of amino acids and vitamins. 1000 ml bottle SUPERBEE ensures a protein and vitamin supply that is essential for family development, especially in cases of low pollen import or pollen with low protein content. A proper and balanced protein and vitamin supply is essential for the development of the bee and its immune system. EXPIRATION: 30-06-2024
€20.00Price
SUPERBEE is a liquid complementary feed consisting of a complete mixture of amino acids and vitamins. 1000 ml bottle SUPERBEE ensures a protein and vitamin supply that is essential for family development, especially in cases of low pollen import or pollen with low protein content. A proper and balanced protein and vitamin supply is essential for the development of the bee and its immune system. EXPIRATION: 30-06-2024
SUPERBEE is a liquid complementary feed consisting of a complete mixture of amino acids and vitamins. 1000 ml bottle SUPERBEE ensures a protein and vitamin supply that is essential for family development, especially in cases of low pollen import or pollen with low protein content. A proper and balanced protein and vitamin supply is essential for the development of the bee and its immune system. EXPIRATION: 30-06-2024
€20.00Price
3M filter with bayonet attachment for use with 3M semi-masks and full face masks, for protection of the respiratory tract from organic vapors (with boiling point above 65°C) with limit of 1000 parts per million. Applications: beekeeping, spray paint and solvent use (mek, toluene), painting operations, production of inks, dyes, resins, chemical industry CE:EN 14387
€39.00Price
3M filter with bayonet attachment for use with 3M semi-masks and full face masks, for protection of the respiratory tract from organic vapors (with boiling point above 65°C) with limit of 1000 parts per million. Applications: beekeeping, spray paint and solvent use (mek, toluene), painting operations, production of inks, dyes, resins, chemical industry CE:EN 14387
€39.00Price
€39.00Price
Filters (class A1) for organic gases and vapors model 3M 6051 are suitable for paints, solvents, organic fumes (e.g., oxalic acid) and nuisance odors.Pack of 2 piecesFor masks (Code. GS 111522-6200) Features:Suitable for 3M 6000 series 3M semi-masks and full-face masks and 7000 series 3M The dual-filter design offers good balance and a panoramic viewFilters can be used with all 3M semi-mask and full-face respirators equipped with a bayonet coupling systemBayonet coupling allows the filters to be easily snapped on
€39.00Price
Filters (class A1) for organic gases and vapors model 3M 6051 are suitable for paints, solvents, organic fumes (e.g., oxalic acid) and nuisance odors.Pack of 2 piecesFor masks (Code. GS 111522-6200) Features:Suitable for 3M 6000 series 3M semi-masks and full-face masks and 7000 series 3M The dual-filter design offers good balance and a panoramic viewFilters can be used with all 3M semi-mask and full-face respirators equipped with a bayonet coupling systemBayonet coupling allows the filters to be easily snapped on
Filters (class A1) for organic gases and vapors model 3M 6051 are suitable for paints, solvents, organic fumes (e.g., oxalic acid) and nuisance odors.Pack of 2 piecesFor masks (Code. GS 111522-6200) Features:Suitable for 3M 6000 series 3M semi-masks and full-face masks and 7000 series 3M The dual-filter design offers good balance and a panoramic viewFilters can be used with all 3M semi-mask and full-face respirators equipped with a bayonet coupling systemBayonet coupling allows the filters to be easily snapped on
€39.00Price
Every year, a portion of the swarm that represents the productive strength of the Beehive is lost. One way to strengthen it is to capture swarms of bees using attractive substances of natural origin. Method of use: - shake the package before use. - remove the cap and spray lightly, with gentle pressure (do not press for long) from about 30 cm away, the inside walls of the Beehive, the surface of the frames and the roof. - Repeat the operation if necessary after 7-10 days Precautions: Aerosol extremely flammable. Pressure vessel: may explode if exposed to high heat sources. May cause allergic skin reactions. Store away from heat, sparks, open flames and any other flammable sources. Do not smoke. Do not damage or puncture the package, even after use. Protect from sunlight. Do not expose to temperatures above 50°C/122°F. Keep out of the reach of children. Do not inhale the aerosol. Use only in open or well-ventilated places
€11.00Price
Every year, a portion of the swarm that represents the productive strength of the Beehive is lost. One way to strengthen it is to capture swarms of bees using attractive substances of natural origin. Method of use: - shake the package before use. - remove the cap and spray lightly, with gentle pressure (do not press for long) from about 30 cm away, the inside walls of the Beehive, the surface of the frames and the roof. - Repeat the operation if necessary after 7-10 days Precautions: Aerosol extremely flammable. Pressure vessel: may explode if exposed to high heat sources. May cause allergic skin reactions. Store away from heat, sparks, open flames and any other flammable sources. Do not smoke. Do not damage or puncture the package, even after use. Protect from sunlight. Do not expose to temperatures above 50°C/122°F. Keep out of the reach of children. Do not inhale the aerosol. Use only in open or well-ventilated places
€11.00Price
€11.00Price
Swarm attractant spray with natural extracts of lemon balm, enough to place 10 Beehives. Specially designed to attract bees, ensures slow release of attractants and lengthens the duration in the field. Product authorized for veterinary use, store in a cool, dry place, away from heat sources. Extremely flammable
€11.00Price
Swarm attractant spray with natural extracts of lemon balm, enough to place 10 Beehives. Specially designed to attract bees, ensures slow release of attractants and lengthens the duration in the field. Product authorized for veterinary use, store in a cool, dry place, away from heat sources. Extremely flammable
Swarm attractant spray with natural extracts of lemon balm, enough to place 10 Beehives. Specially designed to attract bees, ensures slow release of attractants and lengthens the duration in the field. Product authorized for veterinary use, store in a cool, dry place, away from heat sources. Extremely flammable
€11.00Price
The suit is equipped with a detachable astronaut-type mask, and is collapsible. 🐝 PROTECTION WITH VENTILATION - Australian Brand OZ ARMOR beekeeper suit is made with a triple-layer fabric mesh that allows air to circulate around the body while protecting against bee stings. Comes with astronaut mask. 🐝 REDUCED RISK OF BEES - Compared to traditional masks, Oz Armor maintains a protective barrier against bees. Our veils have a patented insert on the inside of the hood, which pulls the mesh away from the face 🐝 EASY TO USE - Our suit has leg height zippers that make it easy to use and remove. Velcro and elastic bands on the ankles and wrists allow adjustment for maximum comfort, and the veils attach easily by covering the zippers. 🐝 DURABLE & LONG-LASTING - Designed to last for years, the mask of our clothing is made of sturdy wire mesh, plus the suit has rayon reinforcements for pockets and knee pads. 🐝 ADVANCED FEATURES - YKK zipper, double sliders on high leg zippers and front zippers for easy access to inside pockets. 12-MONTH WARRANTY.
€102.00Price
The suit is equipped with a detachable astronaut-type mask, and is collapsible. 🐝 PROTECTION WITH VENTILATION - Australian Brand OZ ARMOR beekeeper suit is made with a triple-layer fabric mesh that allows air to circulate around the body while protecting against bee stings. Comes with astronaut mask. 🐝 REDUCED RISK OF BEES - Compared to traditional masks, Oz Armor maintains a protective barrier against bees. Our veils have a patented insert on the inside of the hood, which pulls the mesh away from the face 🐝 EASY TO USE - Our suit has leg height zippers that make it easy to use and remove. Velcro and elastic bands on the ankles and wrists allow adjustment for maximum comfort, and the veils attach easily by covering the zippers. 🐝 DURABLE & LONG-LASTING - Designed to last for years, the mask of our clothing is made of sturdy wire mesh, plus the suit has rayon reinforcements for pockets and knee pads. 🐝 ADVANCED FEATURES - YKK zipper, double sliders on high leg zippers and front zippers for easy access to inside pockets. 12-MONTH WARRANTY.
€102.00Price
€102.00Price
SUIT WITH MASK MESH AIR Australian Brand OZ ARMOR astronaut mesh fabric with 3 layers of lightweight and super durable breathable mesh.
With front zipper up to the crotch and zipper to detach the mask completely. Stiff cotton elastic cuffs and anklets, thumb support6 large front pockets
Size guidelines: For medium build, measurements refer to height:150 to 162 cm., recommended size Small Sda 163 to 170 cm., recommended size Medium. Mda 171 to 176 cm., recommended size Large Lda 176 to 182 cm., recommended size X-Largeda 182 to 189 cm., body weight up to 100 kg recommended size XXLda 182 to 189 cm., body weight up to 110 kg, recommended size XXXL
€102.00Price
SUIT WITH MASK MESH AIR Australian Brand OZ ARMOR astronaut mesh fabric with 3 layers of lightweight and super durable breathable mesh.
With front zipper up to the crotch and zipper to detach the mask completely. Stiff cotton elastic cuffs and anklets, thumb support6 large front pockets
Size guidelines: For medium build, measurements refer to height:150 to 162 cm., recommended size Small Sda 163 to 170 cm., recommended size Medium. Mda 171 to 176 cm., recommended size Large Lda 176 to 182 cm., recommended size X-Largeda 182 to 189 cm., body weight up to 100 kg recommended size XXLda 182 to 189 cm., body weight up to 110 kg, recommended size XXXL
SUIT WITH MASK MESH AIR Australian Brand OZ ARMOR astronaut mesh fabric with 3 layers of lightweight and super durable breathable mesh.
With front zipper up to the crotch and zipper to detach the mask completely. Stiff cotton elastic cuffs and anklets, thumb support6 large front pockets
Size guidelines: For medium build, measurements refer to height:150 to 162 cm., recommended size Small Sda 163 to 170 cm., recommended size Medium. Mda 171 to 176 cm., recommended size Large Lda 176 to 182 cm., recommended size X-Largeda 182 to 189 cm., body weight up to 100 kg recommended size XXLda 182 to 189 cm., body weight up to 110 kg, recommended size XXXL
€102.00Price
- Sale
€5.40Price
DIAPHRAGM made of high-density polystyrene white color to be inserted into the nesting frame D.B. (use frame for diaphragm (Code PI 987)Thickness 20 mm - Width 411 mm x Height 258 mm(NESTING FRAME NOT INCLUDED)
- Sale
€5.40Price
DIAPHRAGM made of high-density polystyrene white color to be inserted into the nesting frame D.B. (use frame for diaphragm (Code PI 987)Thickness 20 mm - Width 411 mm x Height 258 mm(NESTING FRAME NOT INCLUDED)
- Sale
DIAPHRAGM made of high-density polystyrene white color to be inserted into the nesting frame D.B. (use frame for diaphragm (Code PI 987)Thickness 20 mm - Width 411 mm x Height 258 mm(NESTING FRAME NOT INCLUDED)
€5.40Price
Dimensions: Width = 32.20cm; Length = 50cm
€15.00Price
Dimensions: Width = 32.20cm; Length = 50cm
€15.00Price
€15.00Price
Honey super for 7-frame Dadant Blatt Beehives made of 2.5-cm-thick painted wood with 6-notch spacers mounted. Without frames (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€15.00Price
Honey super for 7-frame Dadant Blatt Beehives made of 2.5-cm-thick painted wood with 6-notch spacers mounted. Without frames (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Honey super for 7-frame Dadant Blatt Beehives made of 2.5-cm-thick painted wood with 6-notch spacers mounted. Without frames (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€15.00Price
With 2 hive covers (one for each compartment), galvanized sheet metal roof, 2 bee entrances, 2 sheet metal trays one under each compartment. Beehive interior dimensions: 45cm x 25.5cm h 19cm.
€80.00Price
With 2 hive covers (one for each compartment), galvanized sheet metal roof, 2 bee entrances, 2 sheet metal trays one under each compartment. Beehive interior dimensions: 45cm x 25.5cm h 19cm.
€80.00Price
€80.00Price
2-Compartment Queen Bee Fertilization Nucleus Hive - For 2 fertilization nuclei With 12 D.B. Hoffman self-spacing interlocking half-honeycomb frames (2 half-honeycomb frames joined together form a honeycomb teal) - (Code PI 756)
€80.00Price
2-Compartment Queen Bee Fertilization Nucleus Hive - For 2 fertilization nuclei With 12 D.B. Hoffman self-spacing interlocking half-honeycomb frames (2 half-honeycomb frames joined together form a honeycomb teal) - (Code PI 756)
2-Compartment Queen Bee Fertilization Nucleus Hive - For 2 fertilization nuclei With 12 D.B. Hoffman self-spacing interlocking half-honeycomb frames (2 half-honeycomb frames joined together form a honeycomb teal) - (Code PI 756)
€80.00Price
€10.00Price
Wood screw - carbon steel - 2.5 x 20 mm - length 20 mm - full thread - flat head - cross cut PZ1 coupling For fastening porch and corner guides (Pack of 1000 pcs.)
€10.00Price
Wood screw - carbon steel - 2.5 x 20 mm - length 20 mm - full thread - flat head - cross cut PZ1 coupling For fastening porch and corner guides (Pack of 1000 pcs.)
Wood screw - carbon steel - 2.5 x 20 mm - length 20 mm - full thread - flat head - cross cut PZ1 coupling For fastening porch and corner guides (Pack of 1000 pcs.)
€10.00Price
€10.80Price
Plastic funnel - Diameter 17 cm Suitable for pouring into jars and wide-necked bottles: sauce, fruit salad, juice, jam, etc.
€10.80Price
Plastic funnel - Diameter 17 cm Suitable for pouring into jars and wide-necked bottles: sauce, fruit salad, juice, jam, etc.
Plastic funnel - Diameter 17 cm Suitable for pouring into jars and wide-necked bottles: sauce, fruit salad, juice, jam, etc.
€10.80Price
€620.00Price
Motorized bar for attachment to Giordan 9-frame manual extractorsMotor 180 W, 220 V, 0.65 A, 280 rpm. - Pivot/shaft not included N.B.: The bar is suitable ONLY for recent type honey extractors (Model with welded bottom)[For Crimped older type honey extractors, the bar is not flat but bent in an "L" shape at the ends, available on 0request only]
€620.00Price
Motorized bar for attachment to Giordan 9-frame manual extractorsMotor 180 W, 220 V, 0.65 A, 280 rpm. - Pivot/shaft not included N.B.: The bar is suitable ONLY for recent type honey extractors (Model with welded bottom)[For Crimped older type honey extractors, the bar is not flat but bent in an "L" shape at the ends, available on 0request only]
Motorized bar for attachment to Giordan 9-frame manual extractorsMotor 180 W, 220 V, 0.65 A, 280 rpm. - Pivot/shaft not included N.B.: The bar is suitable ONLY for recent type honey extractors (Model with welded bottom)[For Crimped older type honey extractors, the bar is not flat but bent in an "L" shape at the ends, available on 0request only]
€620.00Price
€38.00Price
Full-diameter NYLON FILTER for 400 Kg ripener - With lanyard for attachment on ripener - DIAMETER 62.5 cm 300 Micron mesh - To be combined with full-diameter mesh filter (400 Kg Cod. QI F34)
€38.00Price
Full-diameter NYLON FILTER for 400 Kg ripener - With lanyard for attachment on ripener - DIAMETER 62.5 cm 300 Micron mesh - To be combined with full-diameter mesh filter (400 Kg Cod. QI F34)
Full-diameter NYLON FILTER for 400 Kg ripener - With lanyard for attachment on ripener - DIAMETER 62.5 cm 300 Micron mesh - To be combined with full-diameter mesh filter (400 Kg Cod. QI F34)
€38.00Price
€40.00Price
STAINLESS STEEL GUARD REDUCTION for food pipe connection from 40 to 50 mm or 1"1/2 to 2"
€40.00Price
STAINLESS STEEL GUARD REDUCTION for food pipe connection from 40 to 50 mm or 1"1/2 to 2"
STAINLESS STEEL GUARD REDUCTION for food pipe connection from 40 to 50 mm or 1"1/2 to 2"
€40.00Price
€2.20Price
Wooden stick with flat rubber ends for convenient royal jelly withdrawal.LengthLength 16.5 cm.
€2.20Price
Wooden stick with flat rubber ends for convenient royal jelly withdrawal.LengthLength 16.5 cm.
Wooden stick with flat rubber ends for convenient royal jelly withdrawal.LengthLength 16.5 cm.
€2.20Price
€142.00Price
STAINLESS STEEL FILTER with diameter 42 cm height 27 cm complete with: STAINLESS STEEL PREFILTER diameter 38 cm, height 14 cm (art. GN 109BP) SUPPORT and 4 feet, max. diameter 70 cm for supporting 200 to 400 kg ripeners For 200 kg ripeners mounted directly - For 400 kg ripeners mounted with support POLYTHENE FILTER BAG diameter 42 cm (art. GN 267)
€142.00Price
STAINLESS STEEL FILTER with diameter 42 cm height 27 cm complete with: STAINLESS STEEL PREFILTER diameter 38 cm, height 14 cm (art. GN 109BP) SUPPORT and 4 feet, max. diameter 70 cm for supporting 200 to 400 kg ripeners For 200 kg ripeners mounted directly - For 400 kg ripeners mounted with support POLYTHENE FILTER BAG diameter 42 cm (art. GN 267)
STAINLESS STEEL FILTER with diameter 42 cm height 27 cm complete with: STAINLESS STEEL PREFILTER diameter 38 cm, height 14 cm (art. GN 109BP) SUPPORT and 4 feet, max. diameter 70 cm for supporting 200 to 400 kg ripeners For 200 kg ripeners mounted directly - For 400 kg ripeners mounted with support POLYTHENE FILTER BAG diameter 42 cm (art. GN 267)
€142.00Price
Operation The timer allows setting the sublimation time through an internal 'trimmer', accessible through the hole provided on the top, and customizable according to the type of treatment. The default time is set in the 'family' mode at 1min 50sec, which corresponds to the treatment time for families on 10-frame Beehives; it is possible to set the timer to the nuclei mode by setting the trimmer to the 'core' position, which corresponds to 1min 20sec, with the help of the supplied accessory. By turning the same trimmer clockwise (to increase the time) and counterclockwise (to decrease the time), a duration from 0min to 5min can also be programmed. The end of the set treatment period is signaled by an audible warning emitted by a 'buzzer' inside the timer; it is possible to start a new treatment by pressing the 'start' button located on the top of the timer, which interrupts the buzzer and starts counting the set treatment time again. Installation The timer should be installed on the sublimator cable, and its location can be freely chosen by the beekeeper according to his or her preferences. However, it is important that the - polarity (blue wire) and + polarity (brown wire) are respected for the timer to operate properly. It is also possible to control 1 or 2 sublimators with a single timer by connecting the two wires of the same sublimators in and out. Two locations are recommended for the installation of the timer on the cable: - Close to the battery, if it is moved continuously near the beekeeper; - Close to the sublimators, leaving enough cable for the beekeeper to make the moves from one Beehive to another
€75.00Price
Operation The timer allows setting the sublimation time through an internal 'trimmer', accessible through the hole provided on the top, and customizable according to the type of treatment. The default time is set in the 'family' mode at 1min 50sec, which corresponds to the treatment time for families on 10-frame Beehives; it is possible to set the timer to the nuclei mode by setting the trimmer to the 'core' position, which corresponds to 1min 20sec, with the help of the supplied accessory. By turning the same trimmer clockwise (to increase the time) and counterclockwise (to decrease the time), a duration from 0min to 5min can also be programmed. The end of the set treatment period is signaled by an audible warning emitted by a 'buzzer' inside the timer; it is possible to start a new treatment by pressing the 'start' button located on the top of the timer, which interrupts the buzzer and starts counting the set treatment time again. Installation The timer should be installed on the sublimator cable, and its location can be freely chosen by the beekeeper according to his or her preferences. However, it is important that the - polarity (blue wire) and + polarity (brown wire) are respected for the timer to operate properly. It is also possible to control 1 or 2 sublimators with a single timer by connecting the two wires of the same sublimators in and out. Two locations are recommended for the installation of the timer on the cable: - Close to the battery, if it is moved continuously near the beekeeper; - Close to the sublimators, leaving enough cable for the beekeeper to make the moves from one Beehive to another
€75.00Price
€75.00Price
The "BLV Timer" is an electronic circuit timer designed and built to facilitate the execution of anti-varroa treatments with sublimated oxalic acid by controlling the treatment time. The timer provides great reliability in time control combined with small size, light weight and operational functionality.
€75.00Price
The "BLV Timer" is an electronic circuit timer designed and built to facilitate the execution of anti-varroa treatments with sublimated oxalic acid by controlling the treatment time. The timer provides great reliability in time control combined with small size, light weight and operational functionality.
The "BLV Timer" is an electronic circuit timer designed and built to facilitate the execution of anti-varroa treatments with sublimated oxalic acid by controlling the treatment time. The timer provides great reliability in time control combined with small size, light weight and operational functionality.
€75.00Price
€22.00Price
CENTRAL PIN FOR CONICAL ALLOY EXTRACTOR BASKET Length : 561 mm Diameter : 14 mm N.B.: Pins are interchangeable with extractors manufactured since 2012
€22.00Price
CENTRAL PIN FOR CONICAL ALLOY EXTRACTOR BASKET Length : 561 mm Diameter : 14 mm N.B.: Pins are interchangeable with extractors manufactured since 2012
CENTRAL PIN FOR CONICAL ALLOY EXTRACTOR BASKET Length : 561 mm Diameter : 14 mm N.B.: Pins are interchangeable with extractors manufactured since 2012
€22.00Price
Can be used to divide bee families
€5.00Price
Can be used to divide bee families
€5.00Price
€5.00Price
Galvanized sheet diaphragm for Dadant Blatt polystyrene Beehives
€5.00Price
Galvanized sheet diaphragm for Dadant Blatt polystyrene Beehives
Galvanized sheet diaphragm for Dadant Blatt polystyrene Beehives
€5.00Price
PET bottle, the anti-drop valve is made of TPE , a material that unlike classic silicone is 100% recyclable in the PET supply chain . Therefore, the complete packaging (bottle + cap + valve) is completely recyclable.
€1.20Price
PET bottle, the anti-drop valve is made of TPE , a material that unlike classic silicone is 100% recyclable in the PET supply chain . Therefore, the complete packaging (bottle + cap + valve) is completely recyclable.
€1.20Price
€1.20Price
BEAR PET HONEY DOSER BOTTLE - BRONZE color screw cap (Code BC 03 ORA) Capacity 170 ml - for 240 g honey With flip top 38/400 screw cap with liner for package integrity and drip-saving valve FOOD IDENTITY CERTIFICATE
€1.20Price
BEAR PET HONEY DOSER BOTTLE - BRONZE color screw cap (Code BC 03 ORA) Capacity 170 ml - for 240 g honey With flip top 38/400 screw cap with liner for package integrity and drip-saving valve FOOD IDENTITY CERTIFICATE
BEAR PET HONEY DOSER BOTTLE - BRONZE color screw cap (Code BC 03 ORA) Capacity 170 ml - for 240 g honey With flip top 38/400 screw cap with liner for package integrity and drip-saving valve FOOD IDENTITY CERTIFICATE
€1.20Price
€15.00Price
Honey super for 8-frame Dadant Blatt Beehives made of 2.5cm-thick painted wood with 7-notch spacers mounted. Frames NOT includedDimensions: 36cm x 50cm
€15.00Price
Honey super for 8-frame Dadant Blatt Beehives made of 2.5cm-thick painted wood with 7-notch spacers mounted. Frames NOT includedDimensions: 36cm x 50cm
Honey super for 8-frame Dadant Blatt Beehives made of 2.5cm-thick painted wood with 7-notch spacers mounted. Frames NOT includedDimensions: 36cm x 50cm
€15.00Price
Our professional pollen catcher trap has the advantage that it can be applied to virtually all existing Beehives, even those that have an entrance from above, and very easily. By attaching two different sheet metal canopies that protect it from the rain on the top, two different planes of support on the wall are created, and it can be applied to STANDARD Beehives with the porch (item LA 2405) and to KUBIK Beehives (item LA 2407). The trap rests on the step and is quickly attached to the front wall of the Beehive with two eye screws in prepared slots. The two clear plastic tubes inserted on either side of the trap are exactly level with the base net and facilitate cleaning by the bees. The "pollen peeler" grid is made of plastic, has only three horizontal rows of round holes and special longitudinal brackets at the base of the holes on which the bees rest before passing through the holes and losing the pollen pellets. The base net, on which the pollen falls before ending up in the box measures 90x360 mm and is made of AISI 304 stainless steel. On the top of the vertical wall supporting the grid are 6 transparent plastic cones with the tips pointing outward, which function as a one-way exit for drones and bees, but are not recognized by the bees as an entrance. The pollen collector drawer has a bottom made of AISI 304 stainless steel mesh, has a large size (330x90x110 mm) with a capacity of about 3300 cm³, and is pulled out by sliding it on two metal guides. (The average yield on a good day can exceed 500 grams.) The galvanized sheet metal canopy protrudes forward and protects the pollen contained in the drawer from rain.
€62.00Price
Our professional pollen catcher trap has the advantage that it can be applied to virtually all existing Beehives, even those that have an entrance from above, and very easily. By attaching two different sheet metal canopies that protect it from the rain on the top, two different planes of support on the wall are created, and it can be applied to STANDARD Beehives with the porch (item LA 2405) and to KUBIK Beehives (item LA 2407). The trap rests on the step and is quickly attached to the front wall of the Beehive with two eye screws in prepared slots. The two clear plastic tubes inserted on either side of the trap are exactly level with the base net and facilitate cleaning by the bees. The "pollen peeler" grid is made of plastic, has only three horizontal rows of round holes and special longitudinal brackets at the base of the holes on which the bees rest before passing through the holes and losing the pollen pellets. The base net, on which the pollen falls before ending up in the box measures 90x360 mm and is made of AISI 304 stainless steel. On the top of the vertical wall supporting the grid are 6 transparent plastic cones with the tips pointing outward, which function as a one-way exit for drones and bees, but are not recognized by the bees as an entrance. The pollen collector drawer has a bottom made of AISI 304 stainless steel mesh, has a large size (330x90x110 mm) with a capacity of about 3300 cm³, and is pulled out by sliding it on two metal guides. (The average yield on a good day can exceed 500 grams.) The galvanized sheet metal canopy protrudes forward and protects the pollen contained in the drawer from rain.
€62.00Price
€62.00Price
Professional Pollen Catcher Trap for Standard D.B. Beehives with 10-fawn porch THE NEW Pollen Catcher Trap, COMPATIBLE WITH ALL EXISTING BEehives The galvanized sheet metal canopy projects forward and protects the pollen contained in the drawer from rain. The trap rests on the step and is quickly attached to the front wall of the Beehive with two eye screws in prepared slots.
€62.00Price
Professional Pollen Catcher Trap for Standard D.B. Beehives with 10-fawn porch THE NEW Pollen Catcher Trap, COMPATIBLE WITH ALL EXISTING BEehives The galvanized sheet metal canopy projects forward and protects the pollen contained in the drawer from rain. The trap rests on the step and is quickly attached to the front wall of the Beehive with two eye screws in prepared slots.
Professional Pollen Catcher Trap for Standard D.B. Beehives with 10-fawn porch THE NEW Pollen Catcher Trap, COMPATIBLE WITH ALL EXISTING BEehives The galvanized sheet metal canopy projects forward and protects the pollen contained in the drawer from rain. The trap rests on the step and is quickly attached to the front wall of the Beehive with two eye screws in prepared slots.
€62.00Price
Assembled and painted 12-frame honeycomb nest, including: honeycomb cover with mounted 4-position disc; 10-cm-high galvanized sheet metal lid lined with wood and faestile on the bottom; metal door; 3 connection angles; 12-frame spacers mounted in the nest; fixed anti-moth net bottom with galvanized sheet metal bottom tray removable from the back; 25mm-thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest
€93.00Price
Assembled and painted 12-frame honeycomb nest, including: honeycomb cover with mounted 4-position disc; 10-cm-high galvanized sheet metal lid lined with wood and faestile on the bottom; metal door; 3 connection angles; 12-frame spacers mounted in the nest; fixed anti-moth net bottom with galvanized sheet metal bottom tray removable from the back; 25mm-thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest
€93.00Price
€93.00Price
Beehive Dadant Blatt 12-frame cube with fixed anti-varroa mesh bottom. Nest only (Frames not included) (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€93.00Price
Beehive Dadant Blatt 12-frame cube with fixed anti-varroa mesh bottom. Nest only (Frames not included) (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehive Dadant Blatt 12-frame cube with fixed anti-varroa mesh bottom. Nest only (Frames not included) (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€93.00Price
- Accessories11) Honey super D.B. 6 honeycombs (Cod. QI M60)12) Front spacer (Cod. QI D32)13) Side reinforcement (Cod. QI R128)14) Polystyrene lid with mesh (Cod. QI C16)15) Wood and mesh lid (Cod. PI 38/A)16) Perforated sheet metal cover (Cod. FO 1045)17) Perforated plastic cover (Cod. ES RT)18) Sheet metal roof (Cod. FO 1042)- Porches 21) Galvanized porch center position (Cod. QI P25)22) Galvanized protective porch with slider (Cod. QI P35)23) Replacement slider protective porch (Cod. QI P36)- Feeders31) 1-hole cable cover feeder (Cod. QI N06)32) 1-hole cable cover feeder new (Cod. QI N07)33) Double compartment cable cover feeder (Cod. QI N12)34) Replacement bell (Cod. QI C97)35) Replacement Vulcanello (Cod. QI C107)- Spare parts 41) Polystyrene porch (Cod. QI P21)42) Polystyrene lid (Art. QI C16B)
€17.50Price
- Accessories11) Honey super D.B. 6 honeycombs (Cod. QI M60)12) Front spacer (Cod. QI D32)13) Side reinforcement (Cod. QI R128)14) Polystyrene lid with mesh (Cod. QI C16)15) Wood and mesh lid (Cod. PI 38/A)16) Perforated sheet metal cover (Cod. FO 1045)17) Perforated plastic cover (Cod. ES RT)18) Sheet metal roof (Cod. FO 1042)- Porches 21) Galvanized porch center position (Cod. QI P25)22) Galvanized protective porch with slider (Cod. QI P35)23) Replacement slider protective porch (Cod. QI P36)- Feeders31) 1-hole cable cover feeder (Cod. QI N06)32) 1-hole cable cover feeder new (Cod. QI N07)33) Double compartment cable cover feeder (Cod. QI N12)34) Replacement bell (Cod. QI C97)35) Replacement Vulcanello (Cod. QI C107)- Spare parts 41) Polystyrene porch (Cod. QI P21)42) Polystyrene lid (Art. QI C16B)
€17.50Price
€17.50Price
6-FAVES D.B. BEEHIVES THE SPACED AREAS IN EPSIThe external design facilitates the handling and transport of the Beehives, aerated bottom, rear honeycomb locks to the bottom, anti book effect, new support feet, and most importantly as many as 4 spacers on 2 sides to create an air vortex between the Beehives during transport.THE SPACERS (4) with rounded shape, 15 mm thickness, height of no less than 230 mm are what is needed to give space to the Beehives once placed on the transport vehicle, provide greater stability to the load and, with the wide net on the bottom are what greatly reduce the risks of suffocation of the families.NET of l fixed anti varroa bottom 350x165mm Front openingHigh density of polystyrene (80)Anti-frame movement spacers on the bottomComplete with polystyrene closing lidExterior dimensions 275 x 495 mm4 Nucleus hive support feet placed2 spacers placed on 2 sides to create an air vortex between the Beehives during transport.
€17.50Price
6-FAVES D.B. BEEHIVES THE SPACED AREAS IN EPSIThe external design facilitates the handling and transport of the Beehives, aerated bottom, rear honeycomb locks to the bottom, anti book effect, new support feet, and most importantly as many as 4 spacers on 2 sides to create an air vortex between the Beehives during transport.THE SPACERS (4) with rounded shape, 15 mm thickness, height of no less than 230 mm are what is needed to give space to the Beehives once placed on the transport vehicle, provide greater stability to the load and, with the wide net on the bottom are what greatly reduce the risks of suffocation of the families.NET of l fixed anti varroa bottom 350x165mm Front openingHigh density of polystyrene (80)Anti-frame movement spacers on the bottomComplete with polystyrene closing lidExterior dimensions 275 x 495 mm4 Nucleus hive support feet placed2 spacers placed on 2 sides to create an air vortex between the Beehives during transport.
6-FAVES D.B. BEEHIVES THE SPACED AREAS IN EPSIThe external design facilitates the handling and transport of the Beehives, aerated bottom, rear honeycomb locks to the bottom, anti book effect, new support feet, and most importantly as many as 4 spacers on 2 sides to create an air vortex between the Beehives during transport.THE SPACERS (4) with rounded shape, 15 mm thickness, height of no less than 230 mm are what is needed to give space to the Beehives once placed on the transport vehicle, provide greater stability to the load and, with the wide net on the bottom are what greatly reduce the risks of suffocation of the families.NET of l fixed anti varroa bottom 350x165mm Front openingHigh density of polystyrene (80)Anti-frame movement spacers on the bottomComplete with polystyrene closing lidExterior dimensions 275 x 495 mm4 Nucleus hive support feet placed2 spacers placed on 2 sides to create an air vortex between the Beehives during transport.
€17.50Price
€10.90Price
GAS PLUS-2 CONTAINER for replacement "Ferret" vaporizer
€10.90Price
GAS PLUS-2 CONTAINER for replacement "Ferret" vaporizer
GAS PLUS-2 CONTAINER for replacement "Ferret" vaporizer
€10.90Price
€76.00Price
D.B. Beehives 10-frame cube (nest only), unpainted.
Movable anti-varroa net bottom Complete assembly kit, including screws.
Movable anti-varroa net bottom with spring hooks for attachment; wooden honeycomb cover; 4-position disc mounted on honeycomb cover; sheet-covered wooden lid; handles; corners; metal door; galvanized sheet tray; 10-notch spacers.
€76.00Price
D.B. Beehives 10-frame cube (nest only), unpainted.
Movable anti-varroa net bottom Complete assembly kit, including screws.
Movable anti-varroa net bottom with spring hooks for attachment; wooden honeycomb cover; 4-position disc mounted on honeycomb cover; sheet-covered wooden lid; handles; corners; metal door; galvanized sheet tray; 10-notch spacers.
D.B. Beehives 10-frame cube (nest only), unpainted.
Movable anti-varroa net bottom Complete assembly kit, including screws.
Movable anti-varroa net bottom with spring hooks for attachment; wooden honeycomb cover; 4-position disc mounted on honeycomb cover; sheet-covered wooden lid; handles; corners; metal door; galvanized sheet tray; 10-notch spacers.
€76.00Price
€1.38Price
FLACON : 10 ml - Ø 25 mm - h 58.5 mm - Mouth PFP 18 NASAL SPRAY 10 ml - draw straw 5 cm Package in thermopack of 170 pieces - SEE Quantity Discount
€1.38Price
FLACON : 10 ml - Ø 25 mm - h 58.5 mm - Mouth PFP 18 NASAL SPRAY 10 ml - draw straw 5 cm Package in thermopack of 170 pieces - SEE Quantity Discount
FLACON : 10 ml - Ø 25 mm - h 58.5 mm - Mouth PFP 18 NASAL SPRAY 10 ml - draw straw 5 cm Package in thermopack of 170 pieces - SEE Quantity Discount
€1.38Price
€0.48Price
GLASS CONTAINER for 30 mL BLUE bottles - with SECURITY SEAL FOR PACK INTEGRITY - GL 18 BOTTLE For 30 mL blue glass bottle(SI RBLU30F)
€0.48Price
GLASS CONTAINER for 30 mL BLUE bottles - with SECURITY SEAL FOR PACK INTEGRITY - GL 18 BOTTLE For 30 mL blue glass bottle(SI RBLU30F)
GLASS CONTAINER for 30 mL BLUE bottles - with SECURITY SEAL FOR PACK INTEGRITY - GL 18 BOTTLE For 30 mL blue glass bottle(SI RBLU30F)
€0.48Price
€1.00Price
Cardboard box for transporting queen cages 12 places - Size: 17x9x4
€1.00Price
Cardboard box for transporting queen cages 12 places - Size: 17x9x4
Cardboard box for transporting queen cages 12 places - Size: 17x9x4
€1.00Price
€78.00Price
MANUAL TRANSMISSION for Extractor with DISCONNECTOR and BRAKE (CE MARK)-ROTATION in ONE WAY SET with : CRANK HANDLE WITH BAR FOR EXTRACTOR DIAM. 700 mm STEEL 9 PRINCIPLES GEARS suitable for 16 mm shaft coupling ( SHAFT SHAFT NOT INCLUDED)
€78.00Price
MANUAL TRANSMISSION for Extractor with DISCONNECTOR and BRAKE (CE MARK)-ROTATION in ONE WAY SET with : CRANK HANDLE WITH BAR FOR EXTRACTOR DIAM. 700 mm STEEL 9 PRINCIPLES GEARS suitable for 16 mm shaft coupling ( SHAFT SHAFT NOT INCLUDED)
MANUAL TRANSMISSION for Extractor with DISCONNECTOR and BRAKE (CE MARK)-ROTATION in ONE WAY SET with : CRANK HANDLE WITH BAR FOR EXTRACTOR DIAM. 700 mm STEEL 9 PRINCIPLES GEARS suitable for 16 mm shaft coupling ( SHAFT SHAFT NOT INCLUDED)
€78.00Price
€25.00Price
STAINLESS STEEL TRAY for polyethylene honeycomb trolley, for 10-frame honeycombs D.B. Please note: NOT FIT TO STAINLESS STEEL HONEY TROLLEY Size: 52 x 45 cm with high edges Can be used as a bottom on Honey super trolley (Art. QI C125) and Honey super carrier (Art.QI P41) or used as a honeycomb cover
€25.00Price
STAINLESS STEEL TRAY for polyethylene honeycomb trolley, for 10-frame honeycombs D.B. Please note: NOT FIT TO STAINLESS STEEL HONEY TROLLEY Size: 52 x 45 cm with high edges Can be used as a bottom on Honey super trolley (Art. QI C125) and Honey super carrier (Art.QI P41) or used as a honeycomb cover
STAINLESS STEEL TRAY for polyethylene honeycomb trolley, for 10-frame honeycombs D.B. Please note: NOT FIT TO STAINLESS STEEL HONEY TROLLEY Size: 52 x 45 cm with high edges Can be used as a bottom on Honey super trolley (Art. QI C125) and Honey super carrier (Art.QI P41) or used as a honeycomb cover
€25.00Price
€14.00Price
Honey super for 6-frame Dadant Blatt Beehives made of painted wood without frames. Availability: - Wall thickness 2.5cm width 28.5cm (for polystyrene or wooden 28.5cm Beehives) with 5 or 6 notches (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€14.00Price
Honey super for 6-frame Dadant Blatt Beehives made of painted wood without frames. Availability: - Wall thickness 2.5cm width 28.5cm (for polystyrene or wooden 28.5cm Beehives) with 5 or 6 notches (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Honey super for 6-frame Dadant Blatt Beehives made of painted wood without frames. Availability: - Wall thickness 2.5cm width 28.5cm (for polystyrene or wooden 28.5cm Beehives) with 5 or 6 notches (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€14.00Price
€36.00Price
Arnietta per fecondazione Api Regine in polistirolo tipo APIDEA completa di 3 telaini (Cod. HY T-0007)Dimensioni: 242 x 149 x 168 mmRICAMBI e ACCESSORI:- Coprivavo in poliestere trasparente (Cod. HY A0022) - Set ricambi rossi (Cod. HY A0032)- Porticina escludi fuco (Cod. HY A4988)
€36.00Price
Arnietta per fecondazione Api Regine in polistirolo tipo APIDEA completa di 3 telaini (Cod. HY T-0007)Dimensioni: 242 x 149 x 168 mmRICAMBI e ACCESSORI:- Coprivavo in poliestere trasparente (Cod. HY A0022) - Set ricambi rossi (Cod. HY A0032)- Porticina escludi fuco (Cod. HY A4988)
Arnietta per fecondazione Api Regine in polistirolo tipo APIDEA completa di 3 telaini (Cod. HY T-0007)Dimensioni: 242 x 149 x 168 mmRICAMBI e ACCESSORI:- Coprivavo in poliestere trasparente (Cod. HY A0022) - Set ricambi rossi (Cod. HY A0032)- Porticina escludi fuco (Cod. HY A4988)
€36.00Price
€132.00Price
STAINLESS STEEL TANGENTIAL BASKET for FAVI D.B. 8 from Honey super and 4 from NIDO and 4 FAVI LANGSTROTH - Extractor DIAMETER 620 mm - 16 mm shaft prearrangement 4-POCKET BASKET Size: Width 360 mm - Height 455 mm
€132.00Price
STAINLESS STEEL TANGENTIAL BASKET for FAVI D.B. 8 from Honey super and 4 from NIDO and 4 FAVI LANGSTROTH - Extractor DIAMETER 620 mm - 16 mm shaft prearrangement 4-POCKET BASKET Size: Width 360 mm - Height 455 mm
STAINLESS STEEL TANGENTIAL BASKET for FAVI D.B. 8 from Honey super and 4 from NIDO and 4 FAVI LANGSTROTH - Extractor DIAMETER 620 mm - 16 mm shaft prearrangement 4-POCKET BASKET Size: Width 360 mm - Height 455 mm
€132.00Price
Can be used for both liquid and solid food. Supplied with cap and steel plate to stop bees. The polystyrene lid of the Beehive is used to close the feeder.
€9.50Price
Can be used for both liquid and solid food. Supplied with cap and steel plate to stop bees. The polystyrene lid of the Beehive is used to close the feeder.
€9.50Price
€9.50Price
Beehive cover feeder for Dadant Blatt white polystyrene 6-frame Beehives (codes PI 64/A and PI 64/CMA ) 6-frame Length 28.5 cm
€9.50Price
Beehive cover feeder for Dadant Blatt white polystyrene 6-frame Beehives (codes PI 64/A and PI 64/CMA ) 6-frame Length 28.5 cm
Beehive cover feeder for Dadant Blatt white polystyrene 6-frame Beehives (codes PI 64/A and PI 64/CMA ) 6-frame Length 28.5 cm
€9.50Price
€21.00Price
Series 9 color photos 20x30 cm Decorative, can be framed
€21.00Price
Series 9 color photos 20x30 cm Decorative, can be framed
Series 9 color photos 20x30 cm Decorative, can be framed
€21.00Price
€9.00Price
SOLVENT GLOVES TO CE STANDARDS CATEGORY II - Green nitrile gloves, contains no latex, anti-allergic.
Length mm. 330, thickness 0.40 mm, with the addition of cotton canvas sleeve cm 20 with cuff at the end cm 6
Available sizes: S/7 - M/8 - L/9 - XL/10 - XXL/11.
CE Certified II Category EN388 mechanical risk resistance levels 4.0.0.2 EN374 chemical and biological risk and for food contact.
€9.00Price
SOLVENT GLOVES TO CE STANDARDS CATEGORY II - Green nitrile gloves, contains no latex, anti-allergic.
Length mm. 330, thickness 0.40 mm, with the addition of cotton canvas sleeve cm 20 with cuff at the end cm 6
Available sizes: S/7 - M/8 - L/9 - XL/10 - XXL/11.
CE Certified II Category EN388 mechanical risk resistance levels 4.0.0.2 EN374 chemical and biological risk and for food contact.
SOLVENT GLOVES TO CE STANDARDS CATEGORY II - Green nitrile gloves, contains no latex, anti-allergic.
Length mm. 330, thickness 0.40 mm, with the addition of cotton canvas sleeve cm 20 with cuff at the end cm 6
Available sizes: S/7 - M/8 - L/9 - XL/10 - XXL/11.
CE Certified II Category EN388 mechanical risk resistance levels 4.0.0.2 EN374 chemical and biological risk and for food contact.
€9.00Price
Assembled and painted 10-fawn nest, including: cable cover with mounted 4-position disc; 10-cm-high galvanized sheet metal lid lined with wood and faestile on the bottom; metal door; 3 angles from connection-spacers mounted in the nest; fixed anti-moth net bottom with galvanized sheet metal bottom tray removable from the back; 25mm-thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest
€87.00Price
Assembled and painted 10-fawn nest, including: cable cover with mounted 4-position disc; 10-cm-high galvanized sheet metal lid lined with wood and faestile on the bottom; metal door; 3 angles from connection-spacers mounted in the nest; fixed anti-moth net bottom with galvanized sheet metal bottom tray removable from the back; 25mm-thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest
€87.00Price
€87.00Price
Beehive Dadant Blatt 10-frame cube with fixed anti-varroa mesh bottom.
Nest only (Frames not included) - Water-painted;
(THE COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€87.00Price
Beehive Dadant Blatt 10-frame cube with fixed anti-varroa mesh bottom.
Nest only (Frames not included) - Water-painted;
(THE COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehive Dadant Blatt 10-frame cube with fixed anti-varroa mesh bottom.
Nest only (Frames not included) - Water-painted;
(THE COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€87.00Price
€0.90Price
Cardboard gift box for No. 1 honey jar 500 g (390 ml) In ONDULATED CANNET series BROWN Dim: 8 x 8 x h 13 cm SEE QUANTITY DISCOUNT
€0.90Price
Cardboard gift box for No. 1 honey jar 500 g (390 ml) In ONDULATED CANNET series BROWN Dim: 8 x 8 x h 13 cm SEE QUANTITY DISCOUNT
Cardboard gift box for No. 1 honey jar 500 g (390 ml) In ONDULATED CANNET series BROWN Dim: 8 x 8 x h 13 cm SEE QUANTITY DISCOUNT
€0.90Price
€0.26Price
CYLINDRICAL glass jar 30 ml for HONEY 35 g (diam.43 cm)
h= 38.8 mm - Diam. = 43.3 mm - weight = 45 g
For CAPSULES:
- CLASSIC FLAT
- FLIP PASTEURIZATION
- FLIP STERILIZATION
€0.26Price
CYLINDRICAL glass jar 30 ml for HONEY 35 g (diam.43 cm)
h= 38.8 mm - Diam. = 43.3 mm - weight = 45 g
For CAPSULES:
- CLASSIC FLAT
- FLIP PASTEURIZATION
- FLIP STERILIZATION
CYLINDRICAL glass jar 30 ml for HONEY 35 g (diam.43 cm)
h= 38.8 mm - Diam. = 43.3 mm - weight = 45 g
For CAPSULES:
- CLASSIC FLAT
- FLIP PASTEURIZATION
- FLIP STERILIZATION
€0.26Price
€5.00Price
PLASTIC CUPOLINE (conf.100 pcs.) for rearing queens and royal gruelCupoline transparent burnished color:It can be applied directly to the fixing block (HY G-0009) or it can be glued with wax directly to the wooden splint
€5.00Price
PLASTIC CUPOLINE (conf.100 pcs.) for rearing queens and royal gruelCupoline transparent burnished color:It can be applied directly to the fixing block (HY G-0009) or it can be glued with wax directly to the wooden splint
PLASTIC CUPOLINE (conf.100 pcs.) for rearing queens and royal gruelCupoline transparent burnished color:It can be applied directly to the fixing block (HY G-0009) or it can be glued with wax directly to the wooden splint
€5.00Price
- Sale
- Sale
€4.00Price
CAGE FOR MARKING QUEEN ON HONEYCOMB
- Sale
CAGE FOR MARKING QUEEN ON HONEYCOMB
€4.00Price
€6,000.00Price
Insulated triple-wall mixer kg 350 capacity with full frontal discharge
€6,000.00Price
Insulated triple-wall mixer kg 350 capacity with full frontal discharge
Insulated triple-wall mixer kg 350 capacity with full frontal discharge
€6,000.00Price
€4.00Price
PLASTIC SPOON for royal jelly (100 pieces) Size: Length 6.5 cm - spoon width 0.8 cm
€4.00Price
PLASTIC SPOON for royal jelly (100 pieces) Size: Length 6.5 cm - spoon width 0.8 cm
PLASTIC SPOON for royal jelly (100 pieces) Size: Length 6.5 cm - spoon width 0.8 cm
€4.00Price
Use The fondimiele is started by the thermostat on the box, the indicator light inicates when the machine is running and lights up when it reaches the set temperature. Turning the knob clockwise causes a click that starts the fondimiele by setting the temperature to a maximum of 45°C. To have an even liquefaction of honey, it is recommended to move the honey fondimiele from bottom to top taking care not to force it because liquefied honey can damage the heating element. IMPORTANT do not turn on the fondimiele if the probe is not in contact with the honey (the bronze ferrule must be in contact with the honey)
€390.00Price
Use The fondimiele is started by the thermostat on the box, the indicator light inicates when the machine is running and lights up when it reaches the set temperature. Turning the knob clockwise causes a click that starts the fondimiele by setting the temperature to a maximum of 45°C. To have an even liquefaction of honey, it is recommended to move the honey fondimiele from bottom to top taking care not to force it because liquefied honey can damage the heating element. IMPORTANT do not turn on the fondimiele if the probe is not in contact with the honey (the bronze ferrule must be in contact with the honey)
€390.00Price
€390.00Price
ELECTRIC ELECTRIC immersion stainless steel melting pot Ø cm 23 with thermostat 220 V - 750 W - 50/60 Hz Description of outer body: stainless steel handle, stem and heating element Useful immersion height: 85 cm
€390.00Price
ELECTRIC ELECTRIC immersion stainless steel melting pot Ø cm 23 with thermostat 220 V - 750 W - 50/60 Hz Description of outer body: stainless steel handle, stem and heating element Useful immersion height: 85 cm
ELECTRIC ELECTRIC immersion stainless steel melting pot Ø cm 23 with thermostat 220 V - 750 W - 50/60 Hz Description of outer body: stainless steel handle, stem and heating element Useful immersion height: 85 cm
€390.00Price
€15.00Price
Replacement large nylon SACCO FILTER for hopper filter - (for filter code QI F05 and QI F06) - 300-micron mesh Diameter: 12 cm Length: 85 cm With fastening strings
€15.00Price
Replacement large nylon SACCO FILTER for hopper filter - (for filter code QI F05 and QI F06) - 300-micron mesh Diameter: 12 cm Length: 85 cm With fastening strings
Replacement large nylon SACCO FILTER for hopper filter - (for filter code QI F05 and QI F06) - 300-micron mesh Diameter: 12 cm Length: 85 cm With fastening strings
€15.00Price
€154.00Price
STAINLESS STEEL MATURATOR capacity 200 kg of honey with TIG welds - Diameter 47 cm - Height 86 cm - Nylon cut-through tap diam. 40 mm (QI R11)TRANSPARENT PLEXIGLAS COVER (QI C120)
€154.00Price
STAINLESS STEEL MATURATOR capacity 200 kg of honey with TIG welds - Diameter 47 cm - Height 86 cm - Nylon cut-through tap diam. 40 mm (QI R11)TRANSPARENT PLEXIGLAS COVER (QI C120)
STAINLESS STEEL MATURATOR capacity 200 kg of honey with TIG welds - Diameter 47 cm - Height 86 cm - Nylon cut-through tap diam. 40 mm (QI R11)TRANSPARENT PLEXIGLAS COVER (QI C120)
€154.00Price
Inverter with single-phase inputPump body made of 316L stainless steelSteel scraper made of food-grade plastic materialRotor made of food-grade plastic materialTransported volume per revolution 0.038 litersMinimum speed 60 rpmMaximum speed 330 rpmMaximum pressure 10 barTransported volume at maximum speed 700 liters/hourMechanical widia-widia sealsHooking lugs diameter 40 mmTypology on requestTotal weight 21 kg.Reversible pumpMaterials used all to food standardsInterely DESTINATION OF USE Suitable for transporting: honey, glucose, syrups, jams, marmalades, chocolate, creams, condensed milk and dairy products, mayonnaise, margarine, yogurt, butter, cheese, melted, cream, puree, fruit juice, juice, fruit concentrates and fruit pulp, fruit and vegetable fruit salads, diced tomatoes, vegetable preserves, sauces, starches, vegetable purees, whey, preserves, fats, eggs, wine, gelatin, malt, homogenized food, olive oil, vegetable oils.
€2,180.00Price
Inverter with single-phase inputPump body made of 316L stainless steelSteel scraper made of food-grade plastic materialRotor made of food-grade plastic materialTransported volume per revolution 0.038 litersMinimum speed 60 rpmMaximum speed 330 rpmMaximum pressure 10 barTransported volume at maximum speed 700 liters/hourMechanical widia-widia sealsHooking lugs diameter 40 mmTypology on requestTotal weight 21 kg.Reversible pumpMaterials used all to food standardsInterely DESTINATION OF USE Suitable for transporting: honey, glucose, syrups, jams, marmalades, chocolate, creams, condensed milk and dairy products, mayonnaise, margarine, yogurt, butter, cheese, melted, cream, puree, fruit juice, juice, fruit concentrates and fruit pulp, fruit and vegetable fruit salads, diced tomatoes, vegetable preserves, sauces, starches, vegetable purees, whey, preserves, fats, eggs, wine, gelatin, malt, homogenized food, olive oil, vegetable oils.
€2,180.00Price
€2,180.00Price
MONOLOBI 60 volumetric honey pumpEquipped with 1/10 gearmotor + single-phase inverterMotor power 0.75 Kw - 400V - three-phase - 2800 rpm.Reversible pumpMaterials used all to food standardsInterestly polished
€2,180.00Price
MONOLOBI 60 volumetric honey pumpEquipped with 1/10 gearmotor + single-phase inverterMotor power 0.75 Kw - 400V - three-phase - 2800 rpm.Reversible pumpMaterials used all to food standardsInterestly polished
MONOLOBI 60 volumetric honey pumpEquipped with 1/10 gearmotor + single-phase inverterMotor power 0.75 Kw - 400V - three-phase - 2800 rpm.Reversible pumpMaterials used all to food standardsInterestly polished
€2,180.00Price
€7,300.00Price
PROFESSIONAL REVERSIBLE 8-frame universal Extractor with stainless steel basket - Ø 1200 mm - With 230V 1 KW motor with variable speed - CYCLE MANAGEMENT with ELECTRONIC PROGRAMMER PROCESSABLE FRAME SAWS : D.B. from 8 honeycomb FROM NEST or 16 FROM HONEY super 8 honeycomb LAYENT 8 honeycomb LANGSTROTH
€7,300.00Price
PROFESSIONAL REVERSIBLE 8-frame universal Extractor with stainless steel basket - Ø 1200 mm - With 230V 1 KW motor with variable speed - CYCLE MANAGEMENT with ELECTRONIC PROGRAMMER PROCESSABLE FRAME SAWS : D.B. from 8 honeycomb FROM NEST or 16 FROM HONEY super 8 honeycomb LAYENT 8 honeycomb LANGSTROTH
PROFESSIONAL REVERSIBLE 8-frame universal Extractor with stainless steel basket - Ø 1200 mm - With 230V 1 KW motor with variable speed - CYCLE MANAGEMENT with ELECTRONIC PROGRAMMER PROCESSABLE FRAME SAWS : D.B. from 8 honeycomb FROM NEST or 16 FROM HONEY super 8 honeycomb LAYENT 8 honeycomb LANGSTROTH
€7,300.00Price
€450.00Price
LANGSTROTH TANGENTIAL Extractor for 6 honeycombs with stainless steel basket - Diameter 620 mm - INOX basket (Code QI C48) - Nylon cut-off tap diam. 40 mm
€450.00Price
LANGSTROTH TANGENTIAL Extractor for 6 honeycombs with stainless steel basket - Diameter 620 mm - INOX basket (Code QI C48) - Nylon cut-off tap diam. 40 mm
LANGSTROTH TANGENTIAL Extractor for 6 honeycombs with stainless steel basket - Diameter 620 mm - INOX basket (Code QI C48) - Nylon cut-off tap diam. 40 mm
€450.00Price
€475.00Price
D.B. MANUAL TANGENTIAL Extractor for 8 Honey super combs 4 nest combs - diameter 620 mm - Nylon cut-off tap diam. 40 mm Basket (Code QI C116) -height 46 cm
€475.00Price
D.B. MANUAL TANGENTIAL Extractor for 8 Honey super combs 4 nest combs - diameter 620 mm - Nylon cut-off tap diam. 40 mm Basket (Code QI C116) -height 46 cm
D.B. MANUAL TANGENTIAL Extractor for 8 Honey super combs 4 nest combs - diameter 620 mm - Nylon cut-off tap diam. 40 mm Basket (Code QI C116) -height 46 cm
€475.00Price
Extractor series 2008-6 REVERSIBLE 6-frame Extractor LANGSTROTH Kw 0.37-230 V, with electronic programmer. IS A NEW SERIES OF EQUIPMENT DESIGNED FOR "SINGLE-BLOCK" HONEY EXTRACTION. In one machine, you have everything you need in a honey extraction room, uncapping ,operculum treatment , accumulation of uncapped combs , honey extraction and decanting of honey. The most obvious advantages are: smaller footprint, convenience in processing steps, with higher yield and reduction of 'inevitable dripping of honey on the floor. The 2008 series is produced in different versions from the hobbyist beekeeper to the professional. The 2008/45 professional series model, the top of the range, is supplied with: a large uncapping bench, complete with uncapping machine with automatic comb unloader and accumulator, electronically controlled centrifuge for opercula, a collector for uncapped frames, an extractor for 45 honeycombs D.B. from Honey super or 20 from nest controlled by a sophisticated software that can manage the extraction cycle independently, a decanting tank with filter that can be heated, pump predisposition for transferring honey into containers.
€3,750.00Price
Extractor series 2008-6 REVERSIBLE 6-frame Extractor LANGSTROTH Kw 0.37-230 V, with electronic programmer. IS A NEW SERIES OF EQUIPMENT DESIGNED FOR "SINGLE-BLOCK" HONEY EXTRACTION. In one machine, you have everything you need in a honey extraction room, uncapping ,operculum treatment , accumulation of uncapped combs , honey extraction and decanting of honey. The most obvious advantages are: smaller footprint, convenience in processing steps, with higher yield and reduction of 'inevitable dripping of honey on the floor. The 2008 series is produced in different versions from the hobbyist beekeeper to the professional. The 2008/45 professional series model, the top of the range, is supplied with: a large uncapping bench, complete with uncapping machine with automatic comb unloader and accumulator, electronically controlled centrifuge for opercula, a collector for uncapped frames, an extractor for 45 honeycombs D.B. from Honey super or 20 from nest controlled by a sophisticated software that can manage the extraction cycle independently, a decanting tank with filter that can be heated, pump predisposition for transferring honey into containers.
€3,750.00Price
€3,750.00Price
Extractor series 2008-6 REVERSIBLE 6-frame LANGSTROTH Kw 0.37-230 V, with electronic programmer
€3,750.00Price
Extractor series 2008-6 REVERSIBLE 6-frame LANGSTROTH Kw 0.37-230 V, with electronic programmer
Extractor series 2008-6 REVERSIBLE 6-frame LANGSTROTH Kw 0.37-230 V, with electronic programmer
€3,750.00Price
- Sale
- -8%
€450.80Regular price-8%€490.00Price
Wax or WINE OPERATOR - Ø 40 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High-strength steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents. Dimensions : Cage 40 x 55 cm - capacity 69 L Screw diameter 40 mm Weight 71 Kg MADE IN ITALY
- Sale
- -8%
€450.80Regular price-8%€490.00Price
Wax or WINE OPERATOR - Ø 40 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High-strength steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents. Dimensions : Cage 40 x 55 cm - capacity 69 L Screw diameter 40 mm Weight 71 Kg MADE IN ITALY
- Sale
- -8%
Wax or WINE OPERATOR - Ø 40 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High-strength steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents. Dimensions : Cage 40 x 55 cm - capacity 69 L Screw diameter 40 mm Weight 71 Kg MADE IN ITALY
€450.80Regular price-8%€490.00Price
Stainless steel blade with heat sink Blade length cm 27 Blade width cm 5.3 Indicator light-on-off Automatic internal thermostat Nylon handle with fiberglass 230 V-120 W Warranty 1 year
€124.00Price
Stainless steel blade with heat sink Blade length cm 27 Blade width cm 5.3 Indicator light-on-off Automatic internal thermostat Nylon handle with fiberglass 230 V-120 W Warranty 1 year
€124.00Price
€124.00Price
Electric KNIFE for uncapping - cm 27 (alim. 230 V-50 Hz) with automatic temperature control switch
€124.00Price
Electric KNIFE for uncapping - cm 27 (alim. 230 V-50 Hz) with automatic temperature control switch
Electric KNIFE for uncapping - cm 27 (alim. 230 V-50 Hz) with automatic temperature control switch
€124.00Price
The cover of the wax melter is made of plexiglass, which concentrates the sun's rays to use solar energy most efficiently, and as a result, the inside of the wax melter heats up very quickly .
€560.00Price
The cover of the wax melter is made of plexiglass, which concentrates the sun's rays to use solar energy most efficiently, and as a result, the inside of the wax melter heats up very quickly .
€560.00Price
€560.00Price
COMPLETE WITH RED SUPPORT NR 2 STAINLESS STEEL WASER COLLECTION BOWLS MEASURES 55 X 92 X h 21 cm Stainless steel wax filter - Stainless steel frames support surface
€560.00Price
COMPLETE WITH RED SUPPORT NR 2 STAINLESS STEEL WASER COLLECTION BOWLS MEASURES 55 X 92 X h 21 cm Stainless steel wax filter - Stainless steel frames support surface
COMPLETE WITH RED SUPPORT NR 2 STAINLESS STEEL WASER COLLECTION BOWLS MEASURES 55 X 92 X h 21 cm Stainless steel wax filter - Stainless steel frames support surface
€560.00Price
€55.00Price
ELECTRICAL INSERT with transformer Power supply 230 V A.C. - 60 VA - output 24 V A.C. With power switch and test leads
€55.00Price
ELECTRICAL INSERT with transformer Power supply 230 V A.C. - 60 VA - output 24 V A.C. With power switch and test leads
ELECTRICAL INSERT with transformer Power supply 230 V A.C. - 60 VA - output 24 V A.C. With power switch and test leads
€55.00Price
€23.00Price
Axillary square hat mask with painted galvanized mesh, black cotton tulle for increased ventilation.
Elastics for fastening under the armpits
€23.00Price
Axillary square hat mask with painted galvanized mesh, black cotton tulle for increased ventilation.
Elastics for fastening under the armpits
Axillary square hat mask with painted galvanized mesh, black cotton tulle for increased ventilation.
Elastics for fastening under the armpits
€23.00Price
€11.00Price
"Germany" type beekeeping lever made of anodized galvanized steel, very durable.
Anodizing is a nonspontaneous electrochemical process by which a protective oxide layer forms on the surface of the treated metal and protects it from corrosion
€11.00Price
"Germany" type beekeeping lever made of anodized galvanized steel, very durable.
Anodizing is a nonspontaneous electrochemical process by which a protective oxide layer forms on the surface of the treated metal and protects it from corrosion
"Germany" type beekeeping lever made of anodized galvanized steel, very durable.
Anodizing is a nonspontaneous electrochemical process by which a protective oxide layer forms on the surface of the treated metal and protects it from corrosion
€11.00Price
€32.00Price
PLASTIC CUPOLINE (conf.100 pcs.) for rearing queens and royal gruelCupoline transparent burnished color:It can be applied directly to the fixing block (HY G-0009) or it can be glued with wax directly to the wooden splint- 1000 pc.
€32.00Price
PLASTIC CUPOLINE (conf.100 pcs.) for rearing queens and royal gruelCupoline transparent burnished color:It can be applied directly to the fixing block (HY G-0009) or it can be glued with wax directly to the wooden splint- 1000 pc.
PLASTIC CUPOLINE (conf.100 pcs.) for rearing queens and royal gruelCupoline transparent burnished color:It can be applied directly to the fixing block (HY G-0009) or it can be glued with wax directly to the wooden splint- 1000 pc.
€32.00Price
€15.00Price
Milled Brassnumbers for Fire Branding 0-9
Suitable for "gas" fire brander with burner (code PI 0051)
Choose Letter
€15.00Price
Milled Brassnumbers for Fire Branding 0-9
Suitable for "gas" fire brander with burner (code PI 0051)
Choose Letter
Milled Brassnumbers for Fire Branding 0-9
Suitable for "gas" fire brander with burner (code PI 0051)
Choose Letter
€15.00Price
€16.00Price
Honey super for 6-frame Dadant Blatt Beehives made of painted wood without frames.
- Wall thickness 2.5 cm width 28.5cm (for polystyrene or wooden 28.5cm Beehives) with 5 or 6 notches
(COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€16.00Price
Honey super for 6-frame Dadant Blatt Beehives made of painted wood without frames.
- Wall thickness 2.5 cm width 28.5cm (for polystyrene or wooden 28.5cm Beehives) with 5 or 6 notches
(COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Honey super for 6-frame Dadant Blatt Beehives made of painted wood without frames.
- Wall thickness 2.5 cm width 28.5cm (for polystyrene or wooden 28.5cm Beehives) with 5 or 6 notches
(COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€16.00Price
€3.00Price
Beeswax angel candleWidth: 3 cmHeight: 7 cm-Weight: 24 gMADE IN ITALY
€3.00Price
Beeswax angel candleWidth: 3 cmHeight: 7 cm-Weight: 24 gMADE IN ITALY
Beeswax angel candleWidth: 3 cmHeight: 7 cm-Weight: 24 gMADE IN ITALY
€3.00Price
Can be used for both liquid and solid food. Supplied with cap and steel plate to stop bees. The polystyrene lid of the Beehive is used to close the feeder.
€8.50Price
Can be used for both liquid and solid food. Supplied with cap and steel plate to stop bees. The polystyrene lid of the Beehive is used to close the feeder.
€8.50Price
€8.50Price
Beehive cover feeder for Dadant Blatt 6-frame white polystyrene Beehives (codes PI 64/A and PI 64/CMA) With a compartment for syrup
€8.50Price
Beehive cover feeder for Dadant Blatt 6-frame white polystyrene Beehives (codes PI 64/A and PI 64/CMA) With a compartment for syrup
Beehive cover feeder for Dadant Blatt 6-frame white polystyrene Beehives (codes PI 64/A and PI 64/CMA) With a compartment for syrup
€8.50Price
It is used by inserting the queen, inside the isolator the time necessary for brood blocking. It allows the queen to continue laying but only on the honeycomb isolated from the cover Varroa control with Biological Method
€3.20Price
It is used by inserting the queen, inside the isolator the time necessary for brood blocking. It allows the queen to continue laying but only on the honeycomb isolated from the cover Varroa control with Biological Method
€3.20Price
€3.20Price
Plastic queen excluder isolator to be applied on D.B. Honey super honeycomb to cage queen for brood blockIsolator complete with queen insertion/release door, raised perimeter edge to facilitate movement of bees and queen inside the honeycomb.Measurements of honeycomb to be caged : Length 470 mm (without support flaps 435 mm)Height 160 mm - Thickness 25 mm- If using plastic Honey super combs (Art QIT62), or the honeycomb with pre-built cells (Art QIT50), one isolator is sufficient,- If using a wooden D.B. Honey super honeycomb, two are needed. The honeycomb cells to be caged must be "under wood" lowerThe price shown is for a single piece - Honeycomb not included
€3.20Price
Plastic queen excluder isolator to be applied on D.B. Honey super honeycomb to cage queen for brood blockIsolator complete with queen insertion/release door, raised perimeter edge to facilitate movement of bees and queen inside the honeycomb.Measurements of honeycomb to be caged : Length 470 mm (without support flaps 435 mm)Height 160 mm - Thickness 25 mm- If using plastic Honey super combs (Art QIT62), or the honeycomb with pre-built cells (Art QIT50), one isolator is sufficient,- If using a wooden D.B. Honey super honeycomb, two are needed. The honeycomb cells to be caged must be "under wood" lowerThe price shown is for a single piece - Honeycomb not included
Plastic queen excluder isolator to be applied on D.B. Honey super honeycomb to cage queen for brood blockIsolator complete with queen insertion/release door, raised perimeter edge to facilitate movement of bees and queen inside the honeycomb.Measurements of honeycomb to be caged : Length 470 mm (without support flaps 435 mm)Height 160 mm - Thickness 25 mm- If using plastic Honey super combs (Art QIT62), or the honeycomb with pre-built cells (Art QIT50), one isolator is sufficient,- If using a wooden D.B. Honey super honeycomb, two are needed. The honeycomb cells to be caged must be "under wood" lowerThe price shown is for a single piece - Honeycomb not included
€3.20Price
€21.00Price
Series 9 color photos20x30 cmDecorative, can be framed
Series 9 color photos20x30 cmDecorative, can be framed
€21.00Price
€748.00Price
The backpack blower comes in a convenient backpack that can be attached to the shoulders by means of specific straps, this allows the 'beekeeper to reach areas that are not easy to access.It comes with the hose and lance. Engine: C7, 2-stroke - Displacement 77 ccMaximum power: 3.6 kW (5 HP)Air volume: 27 m³/min - Air speed: 106 m/sBlend tank: 2.3 liters - Weight: 10 kg
€748.00Price
The backpack blower comes in a convenient backpack that can be attached to the shoulders by means of specific straps, this allows the 'beekeeper to reach areas that are not easy to access.It comes with the hose and lance. Engine: C7, 2-stroke - Displacement 77 ccMaximum power: 3.6 kW (5 HP)Air volume: 27 m³/min - Air speed: 106 m/sBlend tank: 2.3 liters - Weight: 10 kg
The backpack blower comes in a convenient backpack that can be attached to the shoulders by means of specific straps, this allows the 'beekeeper to reach areas that are not easy to access.It comes with the hose and lance. Engine: C7, 2-stroke - Displacement 77 ccMaximum power: 3.6 kW (5 HP)Air volume: 27 m³/min - Air speed: 106 m/sBlend tank: 2.3 liters - Weight: 10 kg
€748.00Price
€16.80Price
FAM plastic evaporator dispenser for adjustable formic acid (pos.1-7), complete with absorbent sponge Dimensions: 25.5 x 25.5 x H= 1.6 cmSpare sponges (Code MP 814) To be applied over the nest framesRemove the Honey super and leave the bees with sufficient supplies for the duration of the treatment.Prepare the evaporator: remove the lid, add formic acid on the sponge and close the lid. Once in the apiary, open the disc according to temperature and family size. Place the inverted evaporator directly above the brood area. Best results are obtained with a 2-3 cm space between the evaporator and the upper slats of the frames. Adjust the disc opening after 2 days, following the instructions of the drug used. WARNINGS: Read attached instructions.
€16.80Price
FAM plastic evaporator dispenser for adjustable formic acid (pos.1-7), complete with absorbent sponge Dimensions: 25.5 x 25.5 x H= 1.6 cmSpare sponges (Code MP 814) To be applied over the nest framesRemove the Honey super and leave the bees with sufficient supplies for the duration of the treatment.Prepare the evaporator: remove the lid, add formic acid on the sponge and close the lid. Once in the apiary, open the disc according to temperature and family size. Place the inverted evaporator directly above the brood area. Best results are obtained with a 2-3 cm space between the evaporator and the upper slats of the frames. Adjust the disc opening after 2 days, following the instructions of the drug used. WARNINGS: Read attached instructions.
FAM plastic evaporator dispenser for adjustable formic acid (pos.1-7), complete with absorbent sponge Dimensions: 25.5 x 25.5 x H= 1.6 cmSpare sponges (Code MP 814) To be applied over the nest framesRemove the Honey super and leave the bees with sufficient supplies for the duration of the treatment.Prepare the evaporator: remove the lid, add formic acid on the sponge and close the lid. Once in the apiary, open the disc according to temperature and family size. Place the inverted evaporator directly above the brood area. Best results are obtained with a 2-3 cm space between the evaporator and the upper slats of the frames. Adjust the disc opening after 2 days, following the instructions of the drug used. WARNINGS: Read attached instructions.
€16.80Price
€12.00Price
Bee escape board for 10-frame Langstroth Beehives 42.5 x 51 cm, made of 100% RECYCLABLE plastic. - With stainless steel ascentAPISCAMPO made of PLASTIC , sturdy, durable and easy to clean (hydro-jet)BASE TABLE with APISCAMPO with OPTIONS : 2-WAY, 8-WAY, 16-WAY, LOSANGE.-For the model with 2-WAY only, no fastening is needed simply insert it in the appropriate housing- For the remaining models ( 8-WAY, 16-WAY, LOSANGE) the BASE TABLE + APISCAMPO + FIXING SCREWS is provided
€12.00Price
Bee escape board for 10-frame Langstroth Beehives 42.5 x 51 cm, made of 100% RECYCLABLE plastic. - With stainless steel ascentAPISCAMPO made of PLASTIC , sturdy, durable and easy to clean (hydro-jet)BASE TABLE with APISCAMPO with OPTIONS : 2-WAY, 8-WAY, 16-WAY, LOSANGE.-For the model with 2-WAY only, no fastening is needed simply insert it in the appropriate housing- For the remaining models ( 8-WAY, 16-WAY, LOSANGE) the BASE TABLE + APISCAMPO + FIXING SCREWS is provided
Bee escape board for 10-frame Langstroth Beehives 42.5 x 51 cm, made of 100% RECYCLABLE plastic. - With stainless steel ascentAPISCAMPO made of PLASTIC , sturdy, durable and easy to clean (hydro-jet)BASE TABLE with APISCAMPO with OPTIONS : 2-WAY, 8-WAY, 16-WAY, LOSANGE.-For the model with 2-WAY only, no fastening is needed simply insert it in the appropriate housing- For the remaining models ( 8-WAY, 16-WAY, LOSANGE) the BASE TABLE + APISCAMPO + FIXING SCREWS is provided
€12.00Price
€165.00Price
STAINLESS STEEL MATURATOR capacity 200 kg of honey with TIG welds - Diameter 47 cm - Height 86 cm TRANSPARENT PLEXIGLAS COVER (QI C120)Maturator with threaded ferrule for 40 mm diameter screw-cut tap attachment with your choice of:- Plastic/Nylon tap (QI R05)- Chrome steel tap (QI R03)- Stainless steel tap (LA 6370)
€165.00Price
STAINLESS STEEL MATURATOR capacity 200 kg of honey with TIG welds - Diameter 47 cm - Height 86 cm TRANSPARENT PLEXIGLAS COVER (QI C120)Maturator with threaded ferrule for 40 mm diameter screw-cut tap attachment with your choice of:- Plastic/Nylon tap (QI R05)- Chrome steel tap (QI R03)- Stainless steel tap (LA 6370)
STAINLESS STEEL MATURATOR capacity 200 kg of honey with TIG welds - Diameter 47 cm - Height 86 cm TRANSPARENT PLEXIGLAS COVER (QI C120)Maturator with threaded ferrule for 40 mm diameter screw-cut tap attachment with your choice of:- Plastic/Nylon tap (QI R05)- Chrome steel tap (QI R03)- Stainless steel tap (LA 6370)
€165.00Price
€12.90Price
Stainless steel pot with spout for easy pouringCapacity: 1.3 LDDiameter 12 cm.Heat- and corrosion-resistant, oxidation-resistant, durable.Ideal for melting wax in a water bath and making wonderful candles!
€12.90Price
Stainless steel pot with spout for easy pouringCapacity: 1.3 LDDiameter 12 cm.Heat- and corrosion-resistant, oxidation-resistant, durable.Ideal for melting wax in a water bath and making wonderful candles!
Stainless steel pot with spout for easy pouringCapacity: 1.3 LDDiameter 12 cm.Heat- and corrosion-resistant, oxidation-resistant, durable.Ideal for melting wax in a water bath and making wonderful candles!
€12.90Price
"CANDYPITA," is a mixture of sugars (sucrose, glucose and fructose) and invert sugar syrup, 100% beetIt is used in bee feeding year-round.Organoleptic properties: light to coffee color, characteristic flavor and odorMethod of use: the product is fed through the coverletDosage one pouch per family Packaging: pvc pouches 1 kg or 2 kg box 16 kg (16 pouches 1 kg or 8 pouches 2 kg) Caution: Store in a cool, dry placeShelf life: preferably within 24 months from date of production
€30.50Price
"CANDYPITA," is a mixture of sugars (sucrose, glucose and fructose) and invert sugar syrup, 100% beetIt is used in bee feeding year-round.Organoleptic properties: light to coffee color, characteristic flavor and odorMethod of use: the product is fed through the coverletDosage one pouch per family Packaging: pvc pouches 1 kg or 2 kg box 16 kg (16 pouches 1 kg or 8 pouches 2 kg) Caution: Store in a cool, dry placeShelf life: preferably within 24 months from date of production
€30.50Price
€30.50Price
CANDYPITA candied paste Complementary food for bees 100% from BEET- Made only with sugars extracted from Beet, contains no starches or other sugars - 16 Kg boxComposition : See attached data sheetOPTIONS : Single 1 Kg or 2 Kg bags
€30.50Price
CANDYPITA candied paste Complementary food for bees 100% from BEET- Made only with sugars extracted from Beet, contains no starches or other sugars - 16 Kg boxComposition : See attached data sheetOPTIONS : Single 1 Kg or 2 Kg bags
CANDYPITA candied paste Complementary food for bees 100% from BEET- Made only with sugars extracted from Beet, contains no starches or other sugars - 16 Kg boxComposition : See attached data sheetOPTIONS : Single 1 Kg or 2 Kg bags
€30.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€43.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€43.00Price
€43.00Price
Height: 90 mm - Diameter: 60 mm - Recommended wick: 3 mm - Weight 225 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€43.00Price
Height: 90 mm - Diameter: 60 mm - Recommended wick: 3 mm - Weight 225 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Height: 90 mm - Diameter: 60 mm - Recommended wick: 3 mm - Weight 225 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€43.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€11.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€11.50Price
€11.50Price
Silicone candle mold with CELLSMold height: 30mmMold diameter: 45mmMold diameter: 3mmWeight: 40Candle size:Height: 15mmDiameter: 35mmWax weight 10g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€11.50Price
Silicone candle mold with CELLSMold height: 30mmMold diameter: 45mmMold diameter: 3mmWeight: 40Candle size:Height: 15mmDiameter: 35mmWax weight 10g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
Silicone candle mold with CELLSMold height: 30mmMold diameter: 45mmMold diameter: 3mmWeight: 40Candle size:Height: 15mmDiameter: 35mmWax weight 10g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€11.50Price
€15.00Price
ROLLED CONICAL CAN made of white plastic - with LID pressure tight closure and safety tab - PLASTIC HANDLE 40 mm NYLON CUT TINCAPACITY : 8 L - Capacity 10/11 Kg of honey
€15.00Price
ROLLED CONICAL CAN made of white plastic - with LID pressure tight closure and safety tab - PLASTIC HANDLE 40 mm NYLON CUT TINCAPACITY : 8 L - Capacity 10/11 Kg of honey
ROLLED CONICAL CAN made of white plastic - with LID pressure tight closure and safety tab - PLASTIC HANDLE 40 mm NYLON CUT TINCAPACITY : 8 L - Capacity 10/11 Kg of honey
€15.00Price
€1.60Price
Clear plastic (PET) jar with food certificateWith 70 mm ALUMINIUM lid (Ref. SK 38 ALU)Volume contained 200 ml Diameter 70 mm Height 65 mmOPTION to be ordered separately: Neutral under cap (for creams) (Ref. GI SK 37)Typical use for cosmetic creams, honey, candies, pills, teas, etc.
€1.60Price
Clear plastic (PET) jar with food certificateWith 70 mm ALUMINIUM lid (Ref. SK 38 ALU)Volume contained 200 ml Diameter 70 mm Height 65 mmOPTION to be ordered separately: Neutral under cap (for creams) (Ref. GI SK 37)Typical use for cosmetic creams, honey, candies, pills, teas, etc.
Clear plastic (PET) jar with food certificateWith 70 mm ALUMINIUM lid (Ref. SK 38 ALU)Volume contained 200 ml Diameter 70 mm Height 65 mmOPTION to be ordered separately: Neutral under cap (for creams) (Ref. GI SK 37)Typical use for cosmetic creams, honey, candies, pills, teas, etc.
€1.60Price
With the uncapping machine, the opercula are not crumbled but cut, as with the use of a hand knife. The knives are heated using a hot water heating and recycling unit (included with the machine), and the temperature of the knives can be adjusted using a special thermostat. The knives also work inside the wooden frame of the honeycombs and thus can uncapping even unfilled frames. Adjustment of the knives is quick and easy via a lever on the side of the uncapping machine that allows the passage between the knives to be tightened or widened. Manually introduced combs are guided and inserted, automatically between the blades in order to achieve regular and systematic uncapping on both sides. The press is constructed entirely of AISI 304 stainless steel and works cold through a perforated mesh containing an auger that presses the operculum. The press receives the operculum as soon as it is removed and divides it between wax and honey, going on to recover 90 percent of the product in a short time and thus avoiding the displacement of the operculum. The press is equipped with a simple and functional control panel where the speed controllers of the operculum-pressing auger with variable pitch are located.
€15,128.00Price
With the uncapping machine, the opercula are not crumbled but cut, as with the use of a hand knife. The knives are heated using a hot water heating and recycling unit (included with the machine), and the temperature of the knives can be adjusted using a special thermostat. The knives also work inside the wooden frame of the honeycombs and thus can uncapping even unfilled frames. Adjustment of the knives is quick and easy via a lever on the side of the uncapping machine that allows the passage between the knives to be tightened or widened. Manually introduced combs are guided and inserted, automatically between the blades in order to achieve regular and systematic uncapping on both sides. The press is constructed entirely of AISI 304 stainless steel and works cold through a perforated mesh containing an auger that presses the operculum. The press receives the operculum as soon as it is removed and divides it between wax and honey, going on to recover 90 percent of the product in a short time and thus avoiding the displacement of the operculum. The press is equipped with a simple and functional control panel where the speed controllers of the operculum-pressing auger with variable pitch are located.
€15,128.00Price
€15,128.00Price
The DISOPRESS 2 is a professional compact machine consisting of the "Giordan" heated vibrating knife uncapping machine (code 170K) and the operculum press. DISOPRESS 2 is constructed entirely of AISI 304 stainless steel and works by guided passage of the frames inside two water-heated vibrating knives that allow for optimal operculum cutting. With the addition of the double blade kit, there is no need to go over the frames again after the uncapping process. Then, the operculum removed from the frames is discharged under the uncapping machine where the operculum press is installed. Uncapping capacity: about 11 frames/minute. Knife temperature: via thermostat from 30° C to 90° C. Power supply: 220 V (also possible in 380 V) Absorption: 3.50 KW **MACHINE PRODUCED FOR DADANT BLATT frames.
€15,128.00Price
The DISOPRESS 2 is a professional compact machine consisting of the "Giordan" heated vibrating knife uncapping machine (code 170K) and the operculum press. DISOPRESS 2 is constructed entirely of AISI 304 stainless steel and works by guided passage of the frames inside two water-heated vibrating knives that allow for optimal operculum cutting. With the addition of the double blade kit, there is no need to go over the frames again after the uncapping process. Then, the operculum removed from the frames is discharged under the uncapping machine where the operculum press is installed. Uncapping capacity: about 11 frames/minute. Knife temperature: via thermostat from 30° C to 90° C. Power supply: 220 V (also possible in 380 V) Absorption: 3.50 KW **MACHINE PRODUCED FOR DADANT BLATT frames.
The DISOPRESS 2 is a professional compact machine consisting of the "Giordan" heated vibrating knife uncapping machine (code 170K) and the operculum press. DISOPRESS 2 is constructed entirely of AISI 304 stainless steel and works by guided passage of the frames inside two water-heated vibrating knives that allow for optimal operculum cutting. With the addition of the double blade kit, there is no need to go over the frames again after the uncapping process. Then, the operculum removed from the frames is discharged under the uncapping machine where the operculum press is installed. Uncapping capacity: about 11 frames/minute. Knife temperature: via thermostat from 30° C to 90° C. Power supply: 220 V (also possible in 380 V) Absorption: 3.50 KW **MACHINE PRODUCED FOR DADANT BLATT frames.
€15,128.00Price
€0.90Price
Small PELUSCE bees for decorations - Diameter 20 mm - Conf. 2 pieces
€0.90Price
Small PELUSCE bees for decorations - Diameter 20 mm - Conf. 2 pieces
Small PELUSCE bees for decorations - Diameter 20 mm - Conf. 2 pieces
€0.90Price
€0.10Price
Hardened 420 °C Stainless Steel Replacement Ball Balls for BOCCOLA HAND HAMMERED ALLOY BUTTERS Diameter 7.94 mm
€0.10Price
Hardened 420 °C Stainless Steel Replacement Ball Balls for BOCCOLA HAND HAMMERED ALLOY BUTTERS Diameter 7.94 mm
Hardened 420 °C Stainless Steel Replacement Ball Balls for BOCCOLA HAND HAMMERED ALLOY BUTTERS Diameter 7.94 mm
€0.10Price
WHEN TO USE Stimulant for family development at spring resumption and before main blooms. Queen laying stimulant Pollen replacement in times of crop shortages Late summer/early fall to ensure reserve protein and vitamin requirements during winter and to lengthen brood rearing period Ideal for preparing swarms, bee packs and fertilization nuclei and for queen rearing. DOSAGE 10 ml of SUPERBEE in 1 L of sugar syrup ADVANTAGES High palatability of the liquid formulation Contains all essential amino acids and vitamins for bee development Easily mixed and therefore usable with any type of carbohydrate syrup GMO FREE protein and vitamin components
€85.00Price
WHEN TO USE Stimulant for family development at spring resumption and before main blooms. Queen laying stimulant Pollen replacement in times of crop shortages Late summer/early fall to ensure reserve protein and vitamin requirements during winter and to lengthen brood rearing period Ideal for preparing swarms, bee packs and fertilization nuclei and for queen rearing. DOSAGE 10 ml of SUPERBEE in 1 L of sugar syrup ADVANTAGES High palatability of the liquid formulation Contains all essential amino acids and vitamins for bee development Easily mixed and therefore usable with any type of carbohydrate syrup GMO FREE protein and vitamin components
€85.00Price
€85.00Price
SUPERBEE is a liquid complementary feed consisting of a complete mixture of amino acids and vitamins.
5 L canister
SUPERBEE ensures a protein and vitamin supply that is essential for family development, especially in cases of low pollen import or pollen with low protein content. A proper and balanced protein and vitamin supply is essential for the development of the bee and its immune system.
€85.00Price
SUPERBEE is a liquid complementary feed consisting of a complete mixture of amino acids and vitamins.
5 L canister
SUPERBEE ensures a protein and vitamin supply that is essential for family development, especially in cases of low pollen import or pollen with low protein content. A proper and balanced protein and vitamin supply is essential for the development of the bee and its immune system.
SUPERBEE is a liquid complementary feed consisting of a complete mixture of amino acids and vitamins.
5 L canister
SUPERBEE ensures a protein and vitamin supply that is essential for family development, especially in cases of low pollen import or pollen with low protein content. A proper and balanced protein and vitamin supply is essential for the development of the bee and its immune system.
€85.00Price
Painted 10-frame D.B. Beehives, with honeycomb, 10 frames in the nest and 9 in the Honey super. Complete with: Nest; Honey super; wooden honeycomb cover with mounted 4-position sheet metal disc; 10cm-high galvanized sheet metal lid lined with wood and faestile on bottom; frames in nest and honeycomb with wax-free wire; metal hatchery door; 3 corners from connection; spacers mounted in nest and honeycomb; fixed anti-varroa net bottom with galvanized sheet metal tray removable from back; 25mm-thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest
€138.00Price
Painted 10-frame D.B. Beehives, with honeycomb, 10 frames in the nest and 9 in the Honey super. Complete with: Nest; Honey super; wooden honeycomb cover with mounted 4-position sheet metal disc; 10cm-high galvanized sheet metal lid lined with wood and faestile on bottom; frames in nest and honeycomb with wax-free wire; metal hatchery door; 3 corners from connection; spacers mounted in nest and honeycomb; fixed anti-varroa net bottom with galvanized sheet metal tray removable from back; 25mm-thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest
€138.00Price
€138.00Price
Beehives Dadant Blatt 10-frame Beehive Cube with fixed anti-varroa mesh bottom. Nest + Honey super + 10 nest frames mounted, pierced and strung + 9 honeycomb frames mounted, pierced and strung (no wax sheets) - Paint + Paraffin coating (FOOD PARAFFIN) Paraffin coating is done in a hot bath with immersion, the entire Beehive is paraffined inside and out, to ensure the durability of the Beehive (COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€138.00Price
Beehives Dadant Blatt 10-frame Beehive Cube with fixed anti-varroa mesh bottom. Nest + Honey super + 10 nest frames mounted, pierced and strung + 9 honeycomb frames mounted, pierced and strung (no wax sheets) - Paint + Paraffin coating (FOOD PARAFFIN) Paraffin coating is done in a hot bath with immersion, the entire Beehive is paraffined inside and out, to ensure the durability of the Beehive (COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehives Dadant Blatt 10-frame Beehive Cube with fixed anti-varroa mesh bottom. Nest + Honey super + 10 nest frames mounted, pierced and strung + 9 honeycomb frames mounted, pierced and strung (no wax sheets) - Paint + Paraffin coating (FOOD PARAFFIN) Paraffin coating is done in a hot bath with immersion, the entire Beehive is paraffined inside and out, to ensure the durability of the Beehive (COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€138.00Price
€45.00Price
Stainless steel PREFILTER with a diameter of 38 cm h. 14 cm To be inserted to the filter for ripeners from 200 to 400 kg (art. GN 109B)
€45.00Price
Stainless steel PREFILTER with a diameter of 38 cm h. 14 cm To be inserted to the filter for ripeners from 200 to 400 kg (art. GN 109B)
Stainless steel PREFILTER with a diameter of 38 cm h. 14 cm To be inserted to the filter for ripeners from 200 to 400 kg (art. GN 109B)
€45.00Price
€1.50Price
REPLACEMENT plastic pollen-collecting BOX for trap (ANEL Art. AL AN57010) Dimensions: 34 x 13 x 8 cm - Weight 115 g
€1.50Price
REPLACEMENT plastic pollen-collecting BOX for trap (ANEL Art. AL AN57010) Dimensions: 34 x 13 x 8 cm - Weight 115 g
REPLACEMENT plastic pollen-collecting BOX for trap (ANEL Art. AL AN57010) Dimensions: 34 x 13 x 8 cm - Weight 115 g
€1.50Price
€12.00Price
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap moldWeight: 0.04 kgSize: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
€13.00Price
€4.50Price
Nylon Notched Coupling Sleeve diameter ø 12mm with Threaded Hole and Grain. ACCESSORY for Extractor "LEGA with ELOBA MOTOR Smooth hole inside diameter 12mm
€4.50Price
Nylon Notched Coupling Sleeve diameter ø 12mm with Threaded Hole and Grain. ACCESSORY for Extractor "LEGA with ELOBA MOTOR Smooth hole inside diameter 12mm
Nylon Notched Coupling Sleeve diameter ø 12mm with Threaded Hole and Grain. ACCESSORY for Extractor "LEGA with ELOBA MOTOR Smooth hole inside diameter 12mm
€4.50Price
€20.00Price
Honey super for Dadant Blatt 7-frame Beehives made of 2.5 cm thick painted wood with 6-notch spacers mounted Complete with 6 wire frames without wax sheets Dimensions: Width = 32.20cm; Length = 50cm
€20.00Price
Honey super for Dadant Blatt 7-frame Beehives made of 2.5 cm thick painted wood with 6-notch spacers mounted Complete with 6 wire frames without wax sheets Dimensions: Width = 32.20cm; Length = 50cm
Honey super for Dadant Blatt 7-frame Beehives made of 2.5 cm thick painted wood with 6-notch spacers mounted Complete with 6 wire frames without wax sheets Dimensions: Width = 32.20cm; Length = 50cm
€20.00Price
€92.00Price
ISO 32 diathermic oil - Specific gravity 865 kg/mcTank of 10 LO diathermic oil used in thermal systems where very high temperatures are required
€92.00Price
ISO 32 diathermic oil - Specific gravity 865 kg/mcTank of 10 LO diathermic oil used in thermal systems where very high temperatures are required
ISO 32 diathermic oil - Specific gravity 865 kg/mcTank of 10 LO diathermic oil used in thermal systems where very high temperatures are required
€92.00Price
€12.00Price
Bee escape on a wooden board for 7-frame D.B. Beehives - with opening valve for ascent - Size: 32.5 x 50 cm thickness 3 cm - RUND 2-WAY PLASTIC BEE ESCAPE (Cod. FO 2121) - RUND 2-WAY METAL BEE ESCAPE (Cod. LA 2100) - PLASTIC LOSANGE BEES (Cod. FO 2130)
€12.00Price
Bee escape on a wooden board for 7-frame D.B. Beehives - with opening valve for ascent - Size: 32.5 x 50 cm thickness 3 cm - RUND 2-WAY PLASTIC BEE ESCAPE (Cod. FO 2121) - RUND 2-WAY METAL BEE ESCAPE (Cod. LA 2100) - PLASTIC LOSANGE BEES (Cod. FO 2130)
Bee escape on a wooden board for 7-frame D.B. Beehives - with opening valve for ascent - Size: 32.5 x 50 cm thickness 3 cm - RUND 2-WAY PLASTIC BEE ESCAPE (Cod. FO 2121) - RUND 2-WAY METAL BEE ESCAPE (Cod. LA 2100) - PLASTIC LOSANGE BEES (Cod. FO 2130)
€12.00Price
€29.00Price
Frame holder rack, of stainless steel, capacity of 9 uncapped combs. placed vertically inside the lid (Code LA 4105110) of the table bench, (Code LA 4106) , can be used as a tray
€29.00Price
Frame holder rack, of stainless steel, capacity of 9 uncapped combs. placed vertically inside the lid (Code LA 4105110) of the table bench, (Code LA 4106) , can be used as a tray
Frame holder rack, of stainless steel, capacity of 9 uncapped combs. placed vertically inside the lid (Code LA 4105110) of the table bench, (Code LA 4106) , can be used as a tray
€29.00Price
Air heating is provided by 2 electric 500W heating elements with thermostat. Air is circulated by a fan. The lid can be removed when the machine is used as a dryer to allow moist air to be expelled
€2,480.00Price
Air heating is provided by 2 electric 500W heating elements with thermostat. Air is circulated by a fan. The lid can be removed when the machine is used as a dryer to allow moist air to be expelled
€2,480.00Price
€2,480.00Price
Professional stainless steel insulated POLLEN DRYER With 10 removable stainless steel drawers Allows drying 15-20 kg of pollen in 24 hours.
€2,480.00Price
Professional stainless steel insulated POLLEN DRYER With 10 removable stainless steel drawers Allows drying 15-20 kg of pollen in 24 hours.
Professional stainless steel insulated POLLEN DRYER With 10 removable stainless steel drawers Allows drying 15-20 kg of pollen in 24 hours.
€2,480.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€36.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€36.00Price
€36.00Price
Mold height: 95 mm - Diameter: 60 mm - Wick: 3 mm -Weight: 135 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€36.00Price
Mold height: 95 mm - Diameter: 60 mm - Wick: 3 mm -Weight: 135 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Mold height: 95 mm - Diameter: 60 mm - Wick: 3 mm -Weight: 135 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€36.00Price
€1.50Price
Cardboard box for transporting queen cages 30 places with holes for ventilation
€1.50Price
Cardboard box for transporting queen cages 30 places with holes for ventilation
Cardboard box for transporting queen cages 30 places with holes for ventilation
€1.50Price
€7.00Price
DIAPHRAGM made of high-density polystyrene white color to be inserted into the nesting frame D.B. (use frame for diaphragm (Code PI 987/30)Thickness 30 mm - Width 411 mm x Height 258 mm(NESTING FRAME NOT INCLUDED)
€7.00Price
DIAPHRAGM made of high-density polystyrene white color to be inserted into the nesting frame D.B. (use frame for diaphragm (Code PI 987/30)Thickness 30 mm - Width 411 mm x Height 258 mm(NESTING FRAME NOT INCLUDED)
DIAPHRAGM made of high-density polystyrene white color to be inserted into the nesting frame D.B. (use frame for diaphragm (Code PI 987/30)Thickness 30 mm - Width 411 mm x Height 258 mm(NESTING FRAME NOT INCLUDED)
€7.00Price
With 3 covers (one for each compartment), galvanized sheet metal roof, 3 entrances for bees with disk 4 position as door - 2 on one side and 1 on the other Beehive interior dimensions: 45 x 25.5 x h 19 cm.
€78.00Price
With 3 covers (one for each compartment), galvanized sheet metal roof, 3 entrances for bees with disk 4 position as door - 2 on one side and 1 on the other Beehive interior dimensions: 45 x 25.5 x h 19 cm.
€78.00Price
€78.00Price
3-Compartment Queen Bee Fertilization Nucleus Hive - For 3 fertilization nuclei With 12 D.B. Hoffman self-spacing interlocking half-honeycomb frames with wire (2 half-honeycomb frames joined together form one normal honeycomb frame) -(Code PI 756)
€78.00Price
3-Compartment Queen Bee Fertilization Nucleus Hive - For 3 fertilization nuclei With 12 D.B. Hoffman self-spacing interlocking half-honeycomb frames with wire (2 half-honeycomb frames joined together form one normal honeycomb frame) -(Code PI 756)
3-Compartment Queen Bee Fertilization Nucleus Hive - For 3 fertilization nuclei With 12 D.B. Hoffman self-spacing interlocking half-honeycomb frames with wire (2 half-honeycomb frames joined together form one normal honeycomb frame) -(Code PI 756)
€78.00Price