Special Products
€2.90Regular price-€0.60€3.50Price
Featured Products
Subcategory
€16.80Price
FAM plastic evaporator dispenser for adjustable formic acid (pos.1-7), complete with absorbent sponge Dimensions: 25.5 x 25.5 x H= 1.6 cmSpare sponges (Code MP 814) To be applied over the nest framesRemove the Honey super and leave the bees with sufficient supplies for the duration of the treatment.Prepare the evaporator: remove the lid, add formic acid on the sponge and close the lid. Once in the apiary, open the disc according to temperature and family size. Place the inverted evaporator directly above the brood area. Best results are obtained with a 2-3 cm space between the evaporator and the upper slats of the frames. Adjust the disc opening after 2 days, following the instructions of the drug used. WARNINGS: Read attached instructions.
€16.80Price
FAM plastic evaporator dispenser for adjustable formic acid (pos.1-7), complete with absorbent sponge Dimensions: 25.5 x 25.5 x H= 1.6 cmSpare sponges (Code MP 814) To be applied over the nest framesRemove the Honey super and leave the bees with sufficient supplies for the duration of the treatment.Prepare the evaporator: remove the lid, add formic acid on the sponge and close the lid. Once in the apiary, open the disc according to temperature and family size. Place the inverted evaporator directly above the brood area. Best results are obtained with a 2-3 cm space between the evaporator and the upper slats of the frames. Adjust the disc opening after 2 days, following the instructions of the drug used. WARNINGS: Read attached instructions.
FAM plastic evaporator dispenser for adjustable formic acid (pos.1-7), complete with absorbent sponge Dimensions: 25.5 x 25.5 x H= 1.6 cmSpare sponges (Code MP 814) To be applied over the nest framesRemove the Honey super and leave the bees with sufficient supplies for the duration of the treatment.Prepare the evaporator: remove the lid, add formic acid on the sponge and close the lid. Once in the apiary, open the disc according to temperature and family size. Place the inverted evaporator directly above the brood area. Best results are obtained with a 2-3 cm space between the evaporator and the upper slats of the frames. Adjust the disc opening after 2 days, following the instructions of the drug used. WARNINGS: Read attached instructions.
€16.80Price
€7.80Price
EXCLUDE-Steel grid 42.5x51 cm for Langstroth Beehives
€7.80Price
EXCLUDE-Steel grid 42.5x51 cm for Langstroth Beehives
EXCLUDE-Steel grid 42.5x51 cm for Langstroth Beehives
€7.80Price
€16.00Price
Silicone Mold - Small Heart
Mold Height: 3.5 cm
Mold Diameter: 6 cm
Mold Circumference: 19.5 cm
Wax Weight: 12 g
Recommended Wick: 3x7
€16.00Price
Silicone Mold - Small Heart
Mold Height: 3.5 cm
Mold Diameter: 6 cm
Mold Circumference: 19.5 cm
Wax Weight: 12 g
Recommended Wick: 3x7
Silicone Mold - Small Heart
Mold Height: 3.5 cm
Mold Diameter: 6 cm
Mold Circumference: 19.5 cm
Wax Weight: 12 g
Recommended Wick: 3x7
€16.00Price
€19.00Price
SUPERCONCENTRATED swarm attracting spray, one spray lasts up to 10 days (less in hot climates) - Up to 250-300 doses.Dimensions : 3.20 x 3.20 x 11.50 cm - Weight : 40.00 g Method of use: a) Choose a spot at a maximum distance of 50 meters from your apiary, where you will easily catch the swarm, and spray directly on the surface where you want to attract it. b) If you want to create a trap (with a modern beehive, or even a traditional type, etc.) spray once in the beehive and once on its entrance. If you have already placed a base frame in the trap, also spray on the side of the frame closest to the entrance.-The ideal height for your trap is around 1.80 m.-Check the Beehive periodically to catch any swarms attracted to the trap.-If you are certain that the spot you sprayed does not emit any odor, repeat the procedure.
€19.00Price
SUPERCONCENTRATED swarm attracting spray, one spray lasts up to 10 days (less in hot climates) - Up to 250-300 doses.Dimensions : 3.20 x 3.20 x 11.50 cm - Weight : 40.00 g Method of use: a) Choose a spot at a maximum distance of 50 meters from your apiary, where you will easily catch the swarm, and spray directly on the surface where you want to attract it. b) If you want to create a trap (with a modern beehive, or even a traditional type, etc.) spray once in the beehive and once on its entrance. If you have already placed a base frame in the trap, also spray on the side of the frame closest to the entrance.-The ideal height for your trap is around 1.80 m.-Check the Beehive periodically to catch any swarms attracted to the trap.-If you are certain that the spot you sprayed does not emit any odor, repeat the procedure.
SUPERCONCENTRATED swarm attracting spray, one spray lasts up to 10 days (less in hot climates) - Up to 250-300 doses.Dimensions : 3.20 x 3.20 x 11.50 cm - Weight : 40.00 g Method of use: a) Choose a spot at a maximum distance of 50 meters from your apiary, where you will easily catch the swarm, and spray directly on the surface where you want to attract it. b) If you want to create a trap (with a modern beehive, or even a traditional type, etc.) spray once in the beehive and once on its entrance. If you have already placed a base frame in the trap, also spray on the side of the frame closest to the entrance.-The ideal height for your trap is around 1.80 m.-Check the Beehive periodically to catch any swarms attracted to the trap.-If you are certain that the spot you sprayed does not emit any odor, repeat the procedure.
€19.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€15.50Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€15.50Price
€15.50Price
Mold height: 35 mm - Wick: 2 mm - Weight: 5 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€15.50Price
Mold height: 35 mm - Wick: 2 mm - Weight: 5 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 35 mm - Wick: 2 mm - Weight: 5 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€15.50Price
**MACHINE MANUFACTURED FOR DADANT BLATT FRAMES. UPON REQUEST, UPON RECEIPT OF MEASUREMENTS, IT CAN ALSO BE MADE FOR OTHER FRAMES.
The knives are heated by a hot water heating and recycling unit (included with the machine), and the knife temperature can be adjusted using a dedicated thermostat. The knives also operate inside the wooden frame of the combs and can therefore uncap even half-full frames. Adjusting the knives is quick and easy using a lever on the side of the uncapping machine, which allows you to narrow or widen the gap between the knives. Manually introduced frames are guided and automatically inserted between the blades to ensure regular and consistent uncapping on both sides.
€6,180.00Price
**MACHINE MANUFACTURED FOR DADANT BLATT FRAMES. UPON REQUEST, UPON RECEIPT OF MEASUREMENTS, IT CAN ALSO BE MADE FOR OTHER FRAMES.
The knives are heated by a hot water heating and recycling unit (included with the machine), and the knife temperature can be adjusted using a dedicated thermostat. The knives also operate inside the wooden frame of the combs and can therefore uncap even half-full frames. Adjusting the knives is quick and easy using a lever on the side of the uncapping machine, which allows you to narrow or widen the gap between the knives. Manually introduced frames are guided and automatically inserted between the blades to ensure regular and consistent uncapping on both sides.
€6,180.00Price
€6,180.00Price
Uncapping Machine (GN 170K) (machine only, no optional extras)
ALWAYS INDICATE THE FRAME DIMENSIONS
The "Giordan" heated vibrating knife uncapping machine is a professional machine that replaces the manual uncapping process. The machine is constructed entirely of AISI 304 stainless steel and works by guiding the frames through two water-heated vibrating knives, which ensure precise and optimal cutting of the cap. With the uncapping machine, the caps are not crumbled but cut, as with a manual knife.
We RECOMMEND adding the double blade kit; there is no need to re-clean the frames after the uncapping process.
DOUBLE KNIFE FINISHING BLADES KIT (Code GN GASGE000054)
Uncapping capacity: approximately 11 frames/minute. Knife temperature: thermostatically controlled from 30°C to 90°C. Power supply: 220 V. Power consumption: 2.8 kW 13.5 A.
DIM: Width 94 cm x Length 61.5 cm x Height 85 cm
€6,180.00Price
Uncapping Machine (GN 170K) (machine only, no optional extras)
ALWAYS INDICATE THE FRAME DIMENSIONS
The "Giordan" heated vibrating knife uncapping machine is a professional machine that replaces the manual uncapping process. The machine is constructed entirely of AISI 304 stainless steel and works by guiding the frames through two water-heated vibrating knives, which ensure precise and optimal cutting of the cap. With the uncapping machine, the caps are not crumbled but cut, as with a manual knife.
We RECOMMEND adding the double blade kit; there is no need to re-clean the frames after the uncapping process.
DOUBLE KNIFE FINISHING BLADES KIT (Code GN GASGE000054)
Uncapping capacity: approximately 11 frames/minute. Knife temperature: thermostatically controlled from 30°C to 90°C. Power supply: 220 V. Power consumption: 2.8 kW 13.5 A.
DIM: Width 94 cm x Length 61.5 cm x Height 85 cm
Uncapping Machine (GN 170K) (machine only, no optional extras)
ALWAYS INDICATE THE FRAME DIMENSIONS
The "Giordan" heated vibrating knife uncapping machine is a professional machine that replaces the manual uncapping process. The machine is constructed entirely of AISI 304 stainless steel and works by guiding the frames through two water-heated vibrating knives, which ensure precise and optimal cutting of the cap. With the uncapping machine, the caps are not crumbled but cut, as with a manual knife.
We RECOMMEND adding the double blade kit; there is no need to re-clean the frames after the uncapping process.
DOUBLE KNIFE FINISHING BLADES KIT (Code GN GASGE000054)
Uncapping capacity: approximately 11 frames/minute. Knife temperature: thermostatically controlled from 30°C to 90°C. Power supply: 220 V. Power consumption: 2.8 kW 13.5 A.
DIM: Width 94 cm x Length 61.5 cm x Height 85 cm
€6,180.00Price
€18.00Price
ROLLED CONICAL BASKET made of white plastic - with LID pressure-tight closure and safety tab - 40 mm NYLON CUT IRON HANDLE Capacity : 19.5 L - Diameter 32.3 cm - Capacity 25 kg of honey
€18.00Price
ROLLED CONICAL BASKET made of white plastic - with LID pressure-tight closure and safety tab - 40 mm NYLON CUT IRON HANDLE Capacity : 19.5 L - Diameter 32.3 cm - Capacity 25 kg of honey
ROLLED CONICAL BASKET made of white plastic - with LID pressure-tight closure and safety tab - 40 mm NYLON CUT IRON HANDLE Capacity : 19.5 L - Diameter 32.3 cm - Capacity 25 kg of honey
€18.00Price
Feeders are containers used to administer nutrition to bees by providing them with sugary substances in liquid form.
€10.50Price
Feeders are containers used to administer nutrition to bees by providing them with sugary substances in liquid form.
€10.50Price
€10.50Price
Rectangular feeder made of thermoplastic material "JUMBO "Made of food-grade plastic, it allows to provide nourishment without disturbing the colony. Supplied with a lid to prevent looting.It fits perfectly over the cable cover (between the cable cover and the roof), taking care to place the hole of the feeder centered on the hole of the cable cover.Capacity: 4 L - Dimensions: 32.5 x 38.5 cm - Height
€10.50Price
Rectangular feeder made of thermoplastic material "JUMBO "Made of food-grade plastic, it allows to provide nourishment without disturbing the colony. Supplied with a lid to prevent looting.It fits perfectly over the cable cover (between the cable cover and the roof), taking care to place the hole of the feeder centered on the hole of the cable cover.Capacity: 4 L - Dimensions: 32.5 x 38.5 cm - Height
Rectangular feeder made of thermoplastic material "JUMBO "Made of food-grade plastic, it allows to provide nourishment without disturbing the colony. Supplied with a lid to prevent looting.It fits perfectly over the cable cover (between the cable cover and the roof), taking care to place the hole of the feeder centered on the hole of the cable cover.Capacity: 4 L - Dimensions: 32.5 x 38.5 cm - Height
€10.50Price
Assembled and painted 10-fawn nest, including: cable cover with mounted 4-position disc; 10-cm-high galvanized sheet metal lid lined with wood and faestile on the bottom; metal door; 3 angles from connection-spacers mounted in the nest; fixed anti-moth net bottom with galvanized sheet metal bottom tray removable from the back; 25mm-thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest
€95.00Price
Assembled and painted 10-fawn nest, including: cable cover with mounted 4-position disc; 10-cm-high galvanized sheet metal lid lined with wood and faestile on the bottom; metal door; 3 angles from connection-spacers mounted in the nest; fixed anti-moth net bottom with galvanized sheet metal bottom tray removable from the back; 25mm-thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest
€95.00Price
€95.00Price
Beehives Dadant Blatt 10-frame cube Beehive with fixed antivarroa mesh bottom. Nest only (Frames not included) - Varnish + Paraffin coating (FOOD PARAFFIN) Paraffin coating is done in a hot bath with immersion, the entire Beehive is paraffined inside and out, to ensure the durability of the Beehives (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€95.00Price
Beehives Dadant Blatt 10-frame cube Beehive with fixed antivarroa mesh bottom. Nest only (Frames not included) - Varnish + Paraffin coating (FOOD PARAFFIN) Paraffin coating is done in a hot bath with immersion, the entire Beehive is paraffined inside and out, to ensure the durability of the Beehives (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehives Dadant Blatt 10-frame cube Beehive with fixed antivarroa mesh bottom. Nest only (Frames not included) - Varnish + Paraffin coating (FOOD PARAFFIN) Paraffin coating is done in a hot bath with immersion, the entire Beehive is paraffined inside and out, to ensure the durability of the Beehives (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€95.00Price
€13.00Price
REPLACEMENT polyethylene SAC with steel hoop for double filter for ripeners from 50 to 200 kg (art. GN 109)
€13.00Price
REPLACEMENT polyethylene SAC with steel hoop for double filter for ripeners from 50 to 200 kg (art. GN 109)
REPLACEMENT polyethylene SAC with steel hoop for double filter for ripeners from 50 to 200 kg (art. GN 109)
€13.00Price
€8.00Price
Royal jelly scoop made of biodegradable material Length 62 mm Package of 100 pieces
€8.00Price
Royal jelly scoop made of biodegradable material Length 62 mm Package of 100 pieces
Royal jelly scoop made of biodegradable material Length 62 mm Package of 100 pieces
€8.00Price
€12.00Price
Flexible silicone soap moldWeight: 0.03 kgMeasures: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
Flexible silicone soap moldWeight: 0.03 kgMeasures: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap moldWeight: 0.03 kgMeasures: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
€3.90Price
Gasket kit for shear taps with 40mm diameter. Compatible with Quarti faucets and Lega faucets. No. 5 gaskets
€3.90Price
Gasket kit for shear taps with 40mm diameter. Compatible with Quarti faucets and Lega faucets. No. 5 gaskets
Gasket kit for shear taps with 40mm diameter. Compatible with Quarti faucets and Lega faucets. No. 5 gaskets
€3.90Price
€52.00Price
Plastic supers trolley for D.B. of 10 honeycombs with 4 wheels External measurements: 48 x 56 cm
Internal measurement: 46 x 54 cm Total height: 15cm
Frame material: PEHD. 4 swivel wheels 80x32 mm. (already included) (Art.R33)
Wheel diameter: 80x32mm.
Wheel support and screws (Art.C127) (already included)
Maximum load: 150kg
OPTIONAL: Stainless steel tray (Cod. QI V41) - Dim.: 52 x 45 cm
€52.00Price
Plastic supers trolley for D.B. of 10 honeycombs with 4 wheels External measurements: 48 x 56 cm
Internal measurement: 46 x 54 cm Total height: 15cm
Frame material: PEHD. 4 swivel wheels 80x32 mm. (already included) (Art.R33)
Wheel diameter: 80x32mm.
Wheel support and screws (Art.C127) (already included)
Maximum load: 150kg
OPTIONAL: Stainless steel tray (Cod. QI V41) - Dim.: 52 x 45 cm
Plastic supers trolley for D.B. of 10 honeycombs with 4 wheels External measurements: 48 x 56 cm
Internal measurement: 46 x 54 cm Total height: 15cm
Frame material: PEHD. 4 swivel wheels 80x32 mm. (already included) (Art.R33)
Wheel diameter: 80x32mm.
Wheel support and screws (Art.C127) (already included)
Maximum load: 150kg
OPTIONAL: Stainless steel tray (Cod. QI V41) - Dim.: 52 x 45 cm
€52.00Price
€0.80Price
SQUEEZER KARMA food-grade plastic SQUEEZER dispenser for 250 g of HONEY DISPENSER equipped with BRONZE screw cap (Code BC 03 ORA) With SAFE SAFE silicone VALVE and SAFEDARD DISK assembled to cap. Italian and European made material with food certification.
€0.80Price
SQUEEZER KARMA food-grade plastic SQUEEZER dispenser for 250 g of HONEY DISPENSER equipped with BRONZE screw cap (Code BC 03 ORA) With SAFE SAFE silicone VALVE and SAFEDARD DISK assembled to cap. Italian and European made material with food certification.
SQUEEZER KARMA food-grade plastic SQUEEZER dispenser for 250 g of HONEY DISPENSER equipped with BRONZE screw cap (Code BC 03 ORA) With SAFE SAFE silicone VALVE and SAFEDARD DISK assembled to cap. Italian and European made material with food certification.
€0.80Price
€1.28Price
Clear plastic (PET) jar with food grade certificate With 70 mm ALUMINIUM lid (Ref. SK 38 ALU) Volume contained 50 ml Diameter 70 mm Height 28 mm OPTION to be ordered separately: Neutral under cap (for creams) (Ref. GI SK 37) Typical use for cosmetic creams, honey, candies, pills, teas, etc.
€1.28Price
Clear plastic (PET) jar with food grade certificate With 70 mm ALUMINIUM lid (Ref. SK 38 ALU) Volume contained 50 ml Diameter 70 mm Height 28 mm OPTION to be ordered separately: Neutral under cap (for creams) (Ref. GI SK 37) Typical use for cosmetic creams, honey, candies, pills, teas, etc.
Clear plastic (PET) jar with food grade certificate With 70 mm ALUMINIUM lid (Ref. SK 38 ALU) Volume contained 50 ml Diameter 70 mm Height 28 mm OPTION to be ordered separately: Neutral under cap (for creams) (Ref. GI SK 37) Typical use for cosmetic creams, honey, candies, pills, teas, etc.
€1.28Price
Replacement resistance for Sublimox sublimator
€78.00Price
Replacement resistance for Sublimox sublimator
€78.00Price
€78.00Price
Replacement resistance for Sublimox sublimator
€78.00Price
Replacement resistance for Sublimox sublimator
Replacement resistance for Sublimox sublimator
€78.00Price
Honey super waxy sheet size Dadant B. obtained by melting PURE Wax of the OPERCOLO - 55 g per sheet
€89.00Price
Honey super waxy sheet size Dadant B. obtained by melting PURE Wax of the OPERCOLO - 55 g per sheet
€89.00Price
€89.00Price
Honey super Dadant B. wax sheets obtained by casting PURE OPERATION - 55 g per sheet - Boxed 5 kg - 91 sheets approx. Sheet size 41 x 12.7 cm PROVENANCE : ITALY
€89.00Price
Honey super Dadant B. wax sheets obtained by casting PURE OPERATION - 55 g per sheet - Boxed 5 kg - 91 sheets approx. Sheet size 41 x 12.7 cm PROVENANCE : ITALY
Honey super Dadant B. wax sheets obtained by casting PURE OPERATION - 55 g per sheet - Boxed 5 kg - 91 sheets approx. Sheet size 41 x 12.7 cm PROVENANCE : ITALY
€89.00Price
TECHNICAL DATA Vat material: Food grade Stainless Steel Aisi 304 Welding: TIG system (to comply with the guarantees required for steel containers in contact with food)Maturator diameter: Ø 380 mm Height: 650 mm Capacity: 100 kg Tap: Ø 40 mm diameter food grade plastic Lid: Stainless Steel
€158.00Price
TECHNICAL DATA Vat material: Food grade Stainless Steel Aisi 304 Welding: TIG system (to comply with the guarantees required for steel containers in contact with food)Maturator diameter: Ø 380 mm Height: 650 mm Capacity: 100 kg Tap: Ø 40 mm diameter food grade plastic Lid: Stainless Steel
€158.00Price
€158.00Price
Maturator completely made of Aisi 304 Food-grade Stainless Steel, with capacity 100 kg of honey, with lid and tap. The solid structure and high quality in the manufacture of Lega ripeners means they are incredibly durable, remaining unchanged over the years, even with intensive use. The red stand is not included in the price and is sold separately
€158.00Price
Maturator completely made of Aisi 304 Food-grade Stainless Steel, with capacity 100 kg of honey, with lid and tap. The solid structure and high quality in the manufacture of Lega ripeners means they are incredibly durable, remaining unchanged over the years, even with intensive use. The red stand is not included in the price and is sold separately
Maturator completely made of Aisi 304 Food-grade Stainless Steel, with capacity 100 kg of honey, with lid and tap. The solid structure and high quality in the manufacture of Lega ripeners means they are incredibly durable, remaining unchanged over the years, even with intensive use. The red stand is not included in the price and is sold separately
€158.00Price
WHEN TO USE Stimulant for family development at spring resumption and before main blooms. Queen laying stimulant Pollen replacement in times of crop shortages Late summer/early fall to ensure reserve protein and vitamin requirements during winter and to lengthen brood rearing period Ideal for preparing swarms, bee packs and fertilization nuclei and for queen rearing. DOSAGE 10 ml of SUPERBEE in 1 L of sugar syrup ADVANTAGES High palatability of the liquid formulation Contains all essential amino acids and vitamins for bee development Easily mixed and therefore usable with any type of carbohydrate syrup GMO FREE protein and vitamin components
€13.60Price
WHEN TO USE Stimulant for family development at spring resumption and before main blooms. Queen laying stimulant Pollen replacement in times of crop shortages Late summer/early fall to ensure reserve protein and vitamin requirements during winter and to lengthen brood rearing period Ideal for preparing swarms, bee packs and fertilization nuclei and for queen rearing. DOSAGE 10 ml of SUPERBEE in 1 L of sugar syrup ADVANTAGES High palatability of the liquid formulation Contains all essential amino acids and vitamins for bee development Easily mixed and therefore usable with any type of carbohydrate syrup GMO FREE protein and vitamin components
€13.60Price
€13.60Price
SUPERBEE is a liquid complementary feed consisting of a complete mixture of amino acids and vitamins. 500 ml bottle SUPERBEE ensures a protein and vitamin supply that is essential for family development, especially in cases of low pollen import or pollen with low protein content. A proper and balanced protein and vitamin supply is essential for the development of the bee and its immune system. EXPIRATION 03/31/2025
€13.60Price
SUPERBEE is a liquid complementary feed consisting of a complete mixture of amino acids and vitamins. 500 ml bottle SUPERBEE ensures a protein and vitamin supply that is essential for family development, especially in cases of low pollen import or pollen with low protein content. A proper and balanced protein and vitamin supply is essential for the development of the bee and its immune system. EXPIRATION 03/31/2025
SUPERBEE is a liquid complementary feed consisting of a complete mixture of amino acids and vitamins. 500 ml bottle SUPERBEE ensures a protein and vitamin supply that is essential for family development, especially in cases of low pollen import or pollen with low protein content. A proper and balanced protein and vitamin supply is essential for the development of the bee and its immune system. EXPIRATION 03/31/2025
€13.60Price
€1.80Price
ROUND-BASED WHITE GLASS BOTTLE with EYE and Cork stopper Capacity: 200 ml
€1.80Price
ROUND-BASED WHITE GLASS BOTTLE with EYE and Cork stopper Capacity: 200 ml
ROUND-BASED WHITE GLASS BOTTLE with EYE and Cork stopper Capacity: 200 ml
€1.80Price
€1,080.00Price
RADIAL Extractor D.B. MOTOR ELOBA 110W/230V variable speed in 2 directions with STAINLESS STEEL basket for 12 Honey super frames (or 3 nest frames with additional cages) - (Basket Cod. QI C101) Ø525 -with CUT-OUT RUBBER in nylon Ø 40 mm For nest frames No. 3 additional stainless steel cages not included (Cod. QI G06) are required.
€1,080.00Price
RADIAL Extractor D.B. MOTOR ELOBA 110W/230V variable speed in 2 directions with STAINLESS STEEL basket for 12 Honey super frames (or 3 nest frames with additional cages) - (Basket Cod. QI C101) Ø525 -with CUT-OUT RUBBER in nylon Ø 40 mm For nest frames No. 3 additional stainless steel cages not included (Cod. QI G06) are required.
RADIAL Extractor D.B. MOTOR ELOBA 110W/230V variable speed in 2 directions with STAINLESS STEEL basket for 12 Honey super frames (or 3 nest frames with additional cages) - (Basket Cod. QI C101) Ø525 -with CUT-OUT RUBBER in nylon Ø 40 mm For nest frames No. 3 additional stainless steel cages not included (Cod. QI G06) are required.
€1,080.00Price
€5.50Price
Adapter to match the pollen trap (Code QI T16) to the 10-frame polystyrene Beehive (Code QI A75).
€5.50Price
Adapter to match the pollen trap (Code QI T16) to the 10-frame polystyrene Beehive (Code QI A75).
Adapter to match the pollen trap (Code QI T16) to the 10-frame polystyrene Beehive (Code QI A75).
€5.50Price
It is used by inserting the queen, inside the isolator the time necessary for brood blocking.It allows the queen to continue laying but only on the honeycomb isolated from the cover Varroa fight with Biological Method
€7.00Price
It is used by inserting the queen, inside the isolator the time necessary for brood blocking.It allows the queen to continue laying but only on the honeycomb isolated from the cover Varroa fight with Biological Method
€7.00Price
€7.00Price
ISOLATOR EXCLUDE QUEEN for FAVO D.B. from Honey super made of PLASTIC KIT BASIC KIT: - No. 1 PLASTIC FAVO with PRESTAMPED CELLS ( NOTE: One side of the FAVO has more depth, and it is the side where to put the ISOLATOR) (Cod. QI T62) - No. 1 PLASTIC ISOLATOR, which attaches to the FAVO, with queen insertion door (Cod. QI I12) OPTIONS : - KIT (FAVO + INSULATOR)- FAVO ONLY- ISOLATOR ONLYThe PLASTIC INSULATOR can be used on a FAVO by D.B. Honey super TRADITIONAL WOODEN FAVO, 2 ISOLATORS mounted and hooked together form a COVED BLOCK CAGE.
€7.00Price
ISOLATOR EXCLUDE QUEEN for FAVO D.B. from Honey super made of PLASTIC KIT BASIC KIT: - No. 1 PLASTIC FAVO with PRESTAMPED CELLS ( NOTE: One side of the FAVO has more depth, and it is the side where to put the ISOLATOR) (Cod. QI T62) - No. 1 PLASTIC ISOLATOR, which attaches to the FAVO, with queen insertion door (Cod. QI I12) OPTIONS : - KIT (FAVO + INSULATOR)- FAVO ONLY- ISOLATOR ONLYThe PLASTIC INSULATOR can be used on a FAVO by D.B. Honey super TRADITIONAL WOODEN FAVO, 2 ISOLATORS mounted and hooked together form a COVED BLOCK CAGE.
ISOLATOR EXCLUDE QUEEN for FAVO D.B. from Honey super made of PLASTIC KIT BASIC KIT: - No. 1 PLASTIC FAVO with PRESTAMPED CELLS ( NOTE: One side of the FAVO has more depth, and it is the side where to put the ISOLATOR) (Cod. QI T62) - No. 1 PLASTIC ISOLATOR, which attaches to the FAVO, with queen insertion door (Cod. QI I12) OPTIONS : - KIT (FAVO + INSULATOR)- FAVO ONLY- ISOLATOR ONLYThe PLASTIC INSULATOR can be used on a FAVO by D.B. Honey super TRADITIONAL WOODEN FAVO, 2 ISOLATORS mounted and hooked together form a COVED BLOCK CAGE.
€7.00Price
€130.00Price
Table-top uncapping bench, for beginner beekeepers, with 600x400x180 mm food-grade plastic tank, with perforated stainless steel sheet basket, for collecting and draining the opercula, stainless steel frame-holder lectern and food-grade plastic tap ø 40 mmACCESSORIES NOT INCLUDED: STAINLESS STEEL COVER (Code LA 4105110) - RACKER (Code LA 4105500) OPTIONS : WITHOUT TAP - WITH TAP
€130.00Price
Table-top uncapping bench, for beginner beekeepers, with 600x400x180 mm food-grade plastic tank, with perforated stainless steel sheet basket, for collecting and draining the opercula, stainless steel frame-holder lectern and food-grade plastic tap ø 40 mmACCESSORIES NOT INCLUDED: STAINLESS STEEL COVER (Code LA 4105110) - RACKER (Code LA 4105500) OPTIONS : WITHOUT TAP - WITH TAP
Table-top uncapping bench, for beginner beekeepers, with 600x400x180 mm food-grade plastic tank, with perforated stainless steel sheet basket, for collecting and draining the opercula, stainless steel frame-holder lectern and food-grade plastic tap ø 40 mmACCESSORIES NOT INCLUDED: STAINLESS STEEL COVER (Code LA 4105110) - RACKER (Code LA 4105500) OPTIONS : WITHOUT TAP - WITH TAP
€130.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€42.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€42.00Price
€42.00Price
Silicone candle mold with small Beehive Mold height: 90 mm - Wick: 3 mm - Weight: 230 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€42.00Price
Silicone candle mold with small Beehive Mold height: 90 mm - Wick: 3 mm - Weight: 230 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
Silicone candle mold with small Beehive Mold height: 90 mm - Wick: 3 mm - Weight: 230 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€42.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€38.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€38.00Price
€38.00Price
Silicone candle mold with twisted cylinder Mold height: 85 mm - Diameter: 70 mm - Wick: 3 mm - Weight: 270 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€38.00Price
Silicone candle mold with twisted cylinder Mold height: 85 mm - Diameter: 70 mm - Wick: 3 mm - Weight: 270 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
Silicone candle mold with twisted cylinder Mold height: 85 mm - Diameter: 70 mm - Wick: 3 mm - Weight: 270 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base. They are not suitable for food production.
€38.00Price
€3.20Price
SELF-AADHESIVE LABEL - GUARANTEE SEAL - ITALIAN HONEY - Pack 10 PIECES For all Honey Jars LENGTH 11 cm
€3.20Price
SELF-AADHESIVE LABEL - GUARANTEE SEAL - ITALIAN HONEY - Pack 10 PIECES For all Honey Jars LENGTH 11 cm
SELF-AADHESIVE LABEL - GUARANTEE SEAL - ITALIAN HONEY - Pack 10 PIECES For all Honey Jars LENGTH 11 cm
€3.20Price
€9.80Price
Curved "S" shaped painted stainless steel lever, strong and durable
"S"-shaped beekeeping lever that fits perfectly under the frame because of its shape.
€9.80Price
Curved "S" shaped painted stainless steel lever, strong and durable
"S"-shaped beekeeping lever that fits perfectly under the frame because of its shape.
Curved "S" shaped painted stainless steel lever, strong and durable
"S"-shaped beekeeping lever that fits perfectly under the frame because of its shape.
€9.80Price
€680.00Price
STAINLESS STEEL revolving solar scrying machine with double glazing cm 70x70 with glass lift Double glazing mounted on painted galvanized steel frame-Spare glass (Cod. QI V33) INOX steel frames support tray ( 4 Honey super or 2 nest ) -Spare stainless steel tray (Cod.QI V34) stainless steel wax filter-Stainless steel removable wax holding tray (Code QI V24) painted galvanized steel pedestal-Swivel support for waxing machine orientation in galvanized steel
€680.00Price
STAINLESS STEEL revolving solar scrying machine with double glazing cm 70x70 with glass lift Double glazing mounted on painted galvanized steel frame-Spare glass (Cod. QI V33) INOX steel frames support tray ( 4 Honey super or 2 nest ) -Spare stainless steel tray (Cod.QI V34) stainless steel wax filter-Stainless steel removable wax holding tray (Code QI V24) painted galvanized steel pedestal-Swivel support for waxing machine orientation in galvanized steel
STAINLESS STEEL revolving solar scrying machine with double glazing cm 70x70 with glass lift Double glazing mounted on painted galvanized steel frame-Spare glass (Cod. QI V33) INOX steel frames support tray ( 4 Honey super or 2 nest ) -Spare stainless steel tray (Cod.QI V34) stainless steel wax filter-Stainless steel removable wax holding tray (Code QI V24) painted galvanized steel pedestal-Swivel support for waxing machine orientation in galvanized steel
€680.00Price
Protective goggles for processing formic acid and other acids
€5.50Price
Protective goggles for processing formic acid and other acids
€5.50Price
€5.50Price
Protective goggles for working with formic acid and other acids. With elastic frame adaptable to the head, side holes allowing direct ventilation.
€5.50Price
Protective goggles for working with formic acid and other acids. With elastic frame adaptable to the head, side holes allowing direct ventilation.
Protective goggles for working with formic acid and other acids. With elastic frame adaptable to the head, side holes allowing direct ventilation.
€5.50Price
[img-3714-left-thickbox_default] [img-3715-left-thickbox_default]
€48.00Price
[img-3714-left-thickbox_default] [img-3715-left-thickbox_default]
€48.00Price
€48.00Price
1liter bottle (allows about 100 traps) Product to be diluted (see dosages below) METHOD OF USE: The product should not be used pure, but diluted as follows: 10 ml liquid attractant 200 ml water 50 g sugar Suitable for HORNET TRAP trap
€48.00Price
1liter bottle (allows about 100 traps) Product to be diluted (see dosages below) METHOD OF USE: The product should not be used pure, but diluted as follows: 10 ml liquid attractant 200 ml water 50 g sugar Suitable for HORNET TRAP trap
1liter bottle (allows about 100 traps) Product to be diluted (see dosages below) METHOD OF USE: The product should not be used pure, but diluted as follows: 10 ml liquid attractant 200 ml water 50 g sugar Suitable for HORNET TRAP trap
€48.00Price
The 3M 6200 reusable semi-mask respirator is easy to use, lightweight and requires minimal maintenance. The respirator is sold with a pair of Class A1 filters suitable for respiratory protection from organic vapors with boiling points above 65°C (e.g., oxalic acid). The nape cap is designed to ensure a snug fit and to facilitate lacing behind the neck. The soft elastomeric facepiece and light weight (82 g) provide excellent comfort even for prolonged periods of work. The compact design minimizes obstruction of the field of view and makes it easy to handle. The two-side filter attachment system offers minimal breathing resistance. Filters (class A1) for organic gases and vapors model 3M 6051 are suitable for paints, solvents, organic fumes (e.g., oxalic acid) and nuisance odors. Suitable for 3M 6000 Series and 7000 Series 3M semi-masks and full-face masks The dual-filter design offers good balance and a panoramic view The filters can be used with all 3M semi-mask and full-face respirators equipped with a bayonet coupling system The bayonet coupling allows the filters to be easily snapped on
€74.00Price
The 3M 6200 reusable semi-mask respirator is easy to use, lightweight and requires minimal maintenance. The respirator is sold with a pair of Class A1 filters suitable for respiratory protection from organic vapors with boiling points above 65°C (e.g., oxalic acid). The nape cap is designed to ensure a snug fit and to facilitate lacing behind the neck. The soft elastomeric facepiece and light weight (82 g) provide excellent comfort even for prolonged periods of work. The compact design minimizes obstruction of the field of view and makes it easy to handle. The two-side filter attachment system offers minimal breathing resistance. Filters (class A1) for organic gases and vapors model 3M 6051 are suitable for paints, solvents, organic fumes (e.g., oxalic acid) and nuisance odors. Suitable for 3M 6000 Series and 7000 Series 3M semi-masks and full-face masks The dual-filter design offers good balance and a panoramic view The filters can be used with all 3M semi-mask and full-face respirators equipped with a bayonet coupling system The bayonet coupling allows the filters to be easily snapped on
€74.00Price
€74.00Price
3M Model 6200 semi-mask respirator (medium size) for protection from organic gases and vapors (e.g., oxalic acid), reusable, made of elastomeric material, equipped with bayonet filter attachment. Pack of 1 pc with 2 filters.For filters see: (Code GS 458382) Features:Two-filter design reduces respiratory resistance Soft, lightweight face piece Economical replaceable filters 3M bayonet filter attachment system Convenient harness and easy buckle closure CE/EN 140 marking
€74.00Price
3M Model 6200 semi-mask respirator (medium size) for protection from organic gases and vapors (e.g., oxalic acid), reusable, made of elastomeric material, equipped with bayonet filter attachment. Pack of 1 pc with 2 filters.For filters see: (Code GS 458382) Features:Two-filter design reduces respiratory resistance Soft, lightweight face piece Economical replaceable filters 3M bayonet filter attachment system Convenient harness and easy buckle closure CE/EN 140 marking
3M Model 6200 semi-mask respirator (medium size) for protection from organic gases and vapors (e.g., oxalic acid), reusable, made of elastomeric material, equipped with bayonet filter attachment. Pack of 1 pc with 2 filters.For filters see: (Code GS 458382) Features:Two-filter design reduces respiratory resistance Soft, lightweight face piece Economical replaceable filters 3M bayonet filter attachment system Convenient harness and easy buckle closure CE/EN 140 marking
€74.00Price
MESH AIR fabric: stands for functionality and comfort. It is a three-dimensional, ladderproof fabric with an abrasion resistance of more than 50,000 MARTINDALE cycles that provides breathability at the highest level.
€92.00Price
MESH AIR fabric: stands for functionality and comfort. It is a three-dimensional, ladderproof fabric with an abrasion resistance of more than 50,000 MARTINDALE cycles that provides breathability at the highest level.
€92.00Price
€92.00Price
SUIT with astronaut mesh MASK made of MESH AIR fabric with 2 layers of breathable mesh fabric that is lightweight and super durable.
With front zipper up to the crotch and zipper to detach the mask completely.Elastic stiff cotton cuffs and anklets, thumb support6 large front pockets
€92.00Price
SUIT with astronaut mesh MASK made of MESH AIR fabric with 2 layers of breathable mesh fabric that is lightweight and super durable.
With front zipper up to the crotch and zipper to detach the mask completely.Elastic stiff cotton cuffs and anklets, thumb support6 large front pockets
SUIT with astronaut mesh MASK made of MESH AIR fabric with 2 layers of breathable mesh fabric that is lightweight and super durable.
With front zipper up to the crotch and zipper to detach the mask completely.Elastic stiff cotton cuffs and anklets, thumb support6 large front pockets
€92.00Price
€5.00Price
Poster with slogan 'Honey to return to nature' printed in 4-color lithography on coated paper. Size: 70 x 100 cm
€5.00Price
Poster with slogan 'Honey to return to nature' printed in 4-color lithography on coated paper. Size: 70 x 100 cm
Poster with slogan 'Honey to return to nature' printed in 4-color lithography on coated paper. Size: 70 x 100 cm
€5.00Price
€2.80Price
Wood screw - galvanized steel - 3.5 x 9.5 mm - length 9.5 mm - full thread - round head For fixing bottom nets (Conf. box of 100 pcs.)
€2.80Price
Wood screw - galvanized steel - 3.5 x 9.5 mm - length 9.5 mm - full thread - round head For fixing bottom nets (Conf. box of 100 pcs.)
Wood screw - galvanized steel - 3.5 x 9.5 mm - length 9.5 mm - full thread - round head For fixing bottom nets (Conf. box of 100 pcs.)
€2.80Price
Thanks to temperature control: - better evaporation of oxalic acid is achieved at the lowest possible temperature without running the risk that it, dissociating at higher temperatures, will lose effectiveness. - time is saved because there is no need to de-power and cool the sublimator between one treatment and the next treatment duration 1:30 minutes per Beehive - battery lasts longer - can run for thousands of treatment cycles. IN ADDITION: - the sublimator stops working before it has completely discharged (and therefore before it has ruined) the battery. - The electrical circuit is insulated from metal parts, so unlike other sublimators, there is no risk of short-circuit if several sublimators powered by the same battery come into contact with each other. Power supply characteristics: 12 volts - 120 watts (Battery not included). Treatment duration: about 1:30 minutes for 2 grams and 40 seconds for 1 gram oxalic acid (3 minutes if cooling the bowl in water between treatments). The oxalic acid is placed in the bowl which will be inserted into the flight opening. As the bowl is heated, the oxalic acid evaporates. A mist is thus formed in the Beehive that coats the bees and all surfaces with a thin layer of oxalic acid crystals. These small crystals are borne well by the bees but have a lethal action on varroa. The bowl is attached to a solid handle from which the 3-meter cable equipped with terminals for electrical connection departs. This sublimator complies with the European Directives, and therefore has a CE mark, and complies with the Rohs Directive on the restriction of the use of hazardous substances in electrical and electronic equipment.
€208.00Price
Thanks to temperature control: - better evaporation of oxalic acid is achieved at the lowest possible temperature without running the risk that it, dissociating at higher temperatures, will lose effectiveness. - time is saved because there is no need to de-power and cool the sublimator between one treatment and the next treatment duration 1:30 minutes per Beehive - battery lasts longer - can run for thousands of treatment cycles. IN ADDITION: - the sublimator stops working before it has completely discharged (and therefore before it has ruined) the battery. - The electrical circuit is insulated from metal parts, so unlike other sublimators, there is no risk of short-circuit if several sublimators powered by the same battery come into contact with each other. Power supply characteristics: 12 volts - 120 watts (Battery not included). Treatment duration: about 1:30 minutes for 2 grams and 40 seconds for 1 gram oxalic acid (3 minutes if cooling the bowl in water between treatments). The oxalic acid is placed in the bowl which will be inserted into the flight opening. As the bowl is heated, the oxalic acid evaporates. A mist is thus formed in the Beehive that coats the bees and all surfaces with a thin layer of oxalic acid crystals. These small crystals are borne well by the bees but have a lethal action on varroa. The bowl is attached to a solid handle from which the 3-meter cable equipped with terminals for electrical connection departs. This sublimator complies with the European Directives, and therefore has a CE mark, and complies with the Rohs Directive on the restriction of the use of hazardous substances in electrical and electronic equipment.
€208.00Price
€208.00Price
12 V stove with temperature control device. Temperature self-adjusts to 200° during sublimation.Made in Italy CE and Rohs compliant.Equipped with 2 measuring spoons.
€208.00Price
12 V stove with temperature control device. Temperature self-adjusts to 200° during sublimation.Made in Italy CE and Rohs compliant.Equipped with 2 measuring spoons.
12 V stove with temperature control device. Temperature self-adjusts to 200° during sublimation.Made in Italy CE and Rohs compliant.Equipped with 2 measuring spoons.
€208.00Price
€27.00Price
Full-diameter NYLON FILTER for 200 kg ripeners - With lanyard for attachment on ripener - DIAMETER 47 cm 300 Micron mesh - To be combined with the full-diameter mesh filter 200 kg (Code QI F25)
€27.00Price
Full-diameter NYLON FILTER for 200 kg ripeners - With lanyard for attachment on ripener - DIAMETER 47 cm 300 Micron mesh - To be combined with the full-diameter mesh filter 200 kg (Code QI F25)
Full-diameter NYLON FILTER for 200 kg ripeners - With lanyard for attachment on ripener - DIAMETER 47 cm 300 Micron mesh - To be combined with the full-diameter mesh filter 200 kg (Code QI F25)
€27.00Price
€1.40Price
With soft rim for collecting royal jelly on one end, and spoon for extracting larvae on the other.
€1.40Price
With soft rim for collecting royal jelly on one end, and spoon for extracting larvae on the other.
With soft rim for collecting royal jelly on one end, and spoon for extracting larvae on the other.
€1.40Price
€1.50Price
Braided white cotton candle wick - Diameter : 2 mmQuantity : 10 mt
€1.50Price
Braided white cotton candle wick - Diameter : 2 mmQuantity : 10 mt
Braided white cotton candle wick - Diameter : 2 mmQuantity : 10 mt
€1.50Price
€15.50Price
APISCAMPO on wooden board 50 x 50 cm for D.B. 12-frame Beehives with 4-WAY Bee escape valve (Code PI 78/A)
€15.50Price
APISCAMPO on wooden board 50 x 50 cm for D.B. 12-frame Beehives with 4-WAY Bee escape valve (Code PI 78/A)
APISCAMPO on wooden board 50 x 50 cm for D.B. 12-frame Beehives with 4-WAY Bee escape valve (Code PI 78/A)
€15.50Price
€3.30Price
STAINLESS STEEL SPACERLength: 42.5 cmFor Beehives D.B. 10 frames with 9 notches 25 mm (Honey super)To be inserted in the honeycomb instead of normal spacers - can be put on and taken off without fixing , for clean propolis collection (No. 1 spacer)
€3.30Price
STAINLESS STEEL SPACERLength: 42.5 cmFor Beehives D.B. 10 frames with 9 notches 25 mm (Honey super)To be inserted in the honeycomb instead of normal spacers - can be put on and taken off without fixing , for clean propolis collection (No. 1 spacer)
STAINLESS STEEL SPACERLength: 42.5 cmFor Beehives D.B. 10 frames with 9 notches 25 mm (Honey super)To be inserted in the honeycomb instead of normal spacers - can be put on and taken off without fixing , for clean propolis collection (No. 1 spacer)
€3.30Price
With 3 covers (one for each compartment), galvanized sheet metal roof, 3 entrances for bees with small doors - 1 on the long side and the remaining 2 on both short sides Beehive interior dimensions: 45 x 18 x h 19 cm.
€76.00Price
With 3 covers (one for each compartment), galvanized sheet metal roof, 3 entrances for bees with small doors - 1 on the long side and the remaining 2 on both short sides Beehive interior dimensions: 45 x 18 x h 19 cm.
€76.00Price
€76.00Price
Nucleus hive for fertilization Queen bees with 3 compartments for 3 fertilization nuclei. With 12 frames one-third D.B. Hoffman self-spacing interlocking wire frames (3 frames joined together form a Honey super frame) - (Code PI 756/A)
€76.00Price
Nucleus hive for fertilization Queen bees with 3 compartments for 3 fertilization nuclei. With 12 frames one-third D.B. Hoffman self-spacing interlocking wire frames (3 frames joined together form a Honey super frame) - (Code PI 756/A)
Nucleus hive for fertilization Queen bees with 3 compartments for 3 fertilization nuclei. With 12 frames one-third D.B. Hoffman self-spacing interlocking wire frames (3 frames joined together form a Honey super frame) - (Code PI 756/A)
€76.00Price
The guide stems from the desire to offer all beekeepers a practical tool, gained through decades of experience in the field, as a beekeeper, in the laboratory, as a passionate pollen producer and trader, and in the classrooms of the many conferences and courses that the author has held throughout Italy over the years. The reader will find therein, illustrated in detail, all the particularities of the "Metalori method," the story of how the idea of designing a new trap came about, and the necessary directions for collecting, preserving and marketing pollen.In the second part of the volume we read original contributions from scientists and doctors who delve into the different aspects of the food use, preservation and even the usefulness of pollen for our organism, the true promise of "nutraceutics," and who make the volume a complete guide unique in its kind in Italy.
€25.00Price
The guide stems from the desire to offer all beekeepers a practical tool, gained through decades of experience in the field, as a beekeeper, in the laboratory, as a passionate pollen producer and trader, and in the classrooms of the many conferences and courses that the author has held throughout Italy over the years. The reader will find therein, illustrated in detail, all the particularities of the "Metalori method," the story of how the idea of designing a new trap came about, and the necessary directions for collecting, preserving and marketing pollen.In the second part of the volume we read original contributions from scientists and doctors who delve into the different aspects of the food use, preservation and even the usefulness of pollen for our organism, the true promise of "nutraceutics," and who make the volume a complete guide unique in its kind in Italy.
€25.00Price
€25.00Price
By Aldo Metalori Montaonda Editions First edition, March 2017
€25.00Price
By Aldo Metalori Montaonda Editions First edition, March 2017
By Aldo Metalori Montaonda Editions First edition, March 2017
€25.00Price
Low RPM honey pump , complete with two 50 mm diameter stainless steel fittings for connection with plastic reinforced hoses Technical data : Flow rate with head 6 m kg/min 25 Impeller rotation speed n /min. 195 Three-phase electric motor 400V/750W Floor space mm 800x400 Overall height mm 800 Weight body only kg 8 Weight with single-phase motor kg 34 Hose holder for loading and unloading pipes mm 50
€1,980.00Price
Low RPM honey pump , complete with two 50 mm diameter stainless steel fittings for connection with plastic reinforced hoses Technical data : Flow rate with head 6 m kg/min 25 Impeller rotation speed n /min. 195 Three-phase electric motor 400V/750W Floor space mm 800x400 Overall height mm 800 Weight body only kg 8 Weight with single-phase motor kg 34 Hose holder for loading and unloading pipes mm 50
€1,980.00Price
€1,980.00Price
Pump , stainless steel body and 90 mm diameter impeller made of neoprene, low speed for honey AUTOADESCENT on trolley with rubberized wheels Alim. three-phase 400V/50Hz - 750 W Rotation speed of 195 rpm in both directions Weight 34 Kg Connection 50 mm/2" !!The pump must not run dry even for a very short time as the impeller would be irreparably damaged
€1,980.00Price
Pump , stainless steel body and 90 mm diameter impeller made of neoprene, low speed for honey AUTOADESCENT on trolley with rubberized wheels Alim. three-phase 400V/50Hz - 750 W Rotation speed of 195 rpm in both directions Weight 34 Kg Connection 50 mm/2" !!The pump must not run dry even for a very short time as the impeller would be irreparably damaged
Pump , stainless steel body and 90 mm diameter impeller made of neoprene, low speed for honey AUTOADESCENT on trolley with rubberized wheels Alim. three-phase 400V/50Hz - 750 W Rotation speed of 195 rpm in both directions Weight 34 Kg Connection 50 mm/2" !!The pump must not run dry even for a very short time as the impeller would be irreparably damaged
€1,980.00Price
Vertical queen excluder usable for brood blocking
€18.00Price
Vertical queen excluder usable for brood blocking
€18.00Price
€18.00Price
Vertical diaphragm queen excluders for polystyrene Beehives
€18.00Price
Vertical diaphragm queen excluders for polystyrene Beehives
Vertical diaphragm queen excluders for polystyrene Beehives
€18.00Price
€36.00Price
SUPPLEMENTARY STAINLESS STEEL PANELS for RADIALNOVE and TUCANO Extractor (ALLOY) - for extracting nest frames, they are placed tangentially For each basket, 3 pieces are needed
€36.00Price
SUPPLEMENTARY STAINLESS STEEL PANELS for RADIALNOVE and TUCANO Extractor (ALLOY) - for extracting nest frames, they are placed tangentially For each basket, 3 pieces are needed
SUPPLEMENTARY STAINLESS STEEL PANELS for RADIALNOVE and TUCANO Extractor (ALLOY) - for extracting nest frames, they are placed tangentially For each basket, 3 pieces are needed
€36.00Price
€1.50Price
Vegetable fuel for smokers in sawdust logs
Weight 1 kg
€1.50Price
Vegetable fuel for smokers in sawdust logs
Weight 1 kg
Vegetable fuel for smokers in sawdust logs
Weight 1 kg
€1.50Price
€9.50Price
POCKET NUTRITIONER made of MASONITE and PARAFFINED WOOD FOOD from D.B. Honey super Beehives - DIM : 43.5 cm x 16 cm
€9.50Price
POCKET NUTRITIONER made of MASONITE and PARAFFINED WOOD FOOD from D.B. Honey super Beehives - DIM : 43.5 cm x 16 cm
POCKET NUTRITIONER made of MASONITE and PARAFFINED WOOD FOOD from D.B. Honey super Beehives - DIM : 43.5 cm x 16 cm
€9.50Price
Fixed anti-varroa mesh bottom; wooden cable cover; 4-position aluminum disc; electro-welded sheet metal lid; metal door; galvanized sheet metal tray; 6-notch spacers.
€71.00Price
Fixed anti-varroa mesh bottom; wooden cable cover; 4-position aluminum disc; electro-welded sheet metal lid; metal door; galvanized sheet metal tray; 6-notch spacers.
€71.00Price
€71.00Price
D.B. Beehives 6-frame cube with porch (nest only), unpainted. Fixed antivarroa mesh bottom.
Complete assembly kit, including screws.
€71.00Price
D.B. Beehives 6-frame cube with porch (nest only), unpainted. Fixed antivarroa mesh bottom.
Complete assembly kit, including screws.
D.B. Beehives 6-frame cube with porch (nest only), unpainted. Fixed antivarroa mesh bottom.
Complete assembly kit, including screws.
€71.00Price
€66.00Price
Beekeeper coveralls, Mask with fully detachable zipper. Cuffs and anklets with elastic bands.
Two pockets on pants, one zippered chest pocket.
Available size: S, M, L, XL, XXL
€66.00Price
Beekeeper coveralls, Mask with fully detachable zipper. Cuffs and anklets with elastic bands.
Two pockets on pants, one zippered chest pocket.
Available size: S, M, L, XL, XXL
Beekeeper coveralls, Mask with fully detachable zipper. Cuffs and anklets with elastic bands.
Two pockets on pants, one zippered chest pocket.
Available size: S, M, L, XL, XXL
€66.00Price
Painted 10-frame D.B. Beehives, with honeycomb and 10 frames in the nest and 9 in the Honey super. Complete with: Nest; Honey super; wooden honeycomb cover with mounted 4-position sheet metal disc; 10cm-high galvanized sheet metal lid lined with wood and faestile on bottom; galvanized sheet metal canopy; frames in nest and honeycomb with wax-free wire; plastic transport mask; galvanized pinwheels; metal porch; 3 connection angles; spacers mounted in the nest and honeycomb; mobile antivarroa net bottom with galvanized sheet metal tray removable from the back; 25mm thick seasoned spruce wood; walls assembled with screws; handles for transport; Frame rest
€132.00Price
Painted 10-frame D.B. Beehives, with honeycomb and 10 frames in the nest and 9 in the Honey super. Complete with: Nest; Honey super; wooden honeycomb cover with mounted 4-position sheet metal disc; 10cm-high galvanized sheet metal lid lined with wood and faestile on bottom; galvanized sheet metal canopy; frames in nest and honeycomb with wax-free wire; plastic transport mask; galvanized pinwheels; metal porch; 3 connection angles; spacers mounted in the nest and honeycomb; mobile antivarroa net bottom with galvanized sheet metal tray removable from the back; 25mm thick seasoned spruce wood; walls assembled with screws; handles for transport; Frame rest
€132.00Price
€132.00Price
D.B. 10-frame Standard Beehives with movable anti-varroa net bottom.
Nest + Honey super + 10 nest frames mounted, drilled and strung + 9 honeycomb frames mounted, drilled and strung (without wax sheets) Water-painted
(THE COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€132.00Price
D.B. 10-frame Standard Beehives with movable anti-varroa net bottom.
Nest + Honey super + 10 nest frames mounted, drilled and strung + 9 honeycomb frames mounted, drilled and strung (without wax sheets) Water-painted
(THE COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
D.B. 10-frame Standard Beehives with movable anti-varroa net bottom.
Nest + Honey super + 10 nest frames mounted, drilled and strung + 9 honeycomb frames mounted, drilled and strung (without wax sheets) Water-painted
(THE COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€132.00Price
€0.45Price
YELLOW GLASS FLACON : 15 ml -DIAM. 28.5 mm- MOUTH PFP18 RASO MOUTH PFP 18 CONTAINER WHITE PLASTIC CLOSURE CAPS -MOUTH PFP 18- With safety seal (CHILD-PROFF "SAVEBABY" SEAL) Packaged in thermopack of 170 pieces
€0.45Price
YELLOW GLASS FLACON : 15 ml -DIAM. 28.5 mm- MOUTH PFP18 RASO MOUTH PFP 18 CONTAINER WHITE PLASTIC CLOSURE CAPS -MOUTH PFP 18- With safety seal (CHILD-PROFF "SAVEBABY" SEAL) Packaged in thermopack of 170 pieces
YELLOW GLASS FLACON : 15 ml -DIAM. 28.5 mm- MOUTH PFP18 RASO MOUTH PFP 18 CONTAINER WHITE PLASTIC CLOSURE CAPS -MOUTH PFP 18- With safety seal (CHILD-PROFF "SAVEBABY" SEAL) Packaged in thermopack of 170 pieces
€0.45Price
€0.45Price
YELLOW GLASS FLACON : 30 ml - DIAM. 34 mm - h = 73.2 mm MOUTH PFP18 BOTTLE CONTAINER WHITE PLASTIC CLOSURE CAPS -Mouth PFP 18- With safety seal (CHILD-PROFF "CHILD-SAVING" SEAL Packaged in thermopack of 104 pieces
€0.45Price
YELLOW GLASS FLACON : 30 ml - DIAM. 34 mm - h = 73.2 mm MOUTH PFP18 BOTTLE CONTAINER WHITE PLASTIC CLOSURE CAPS -Mouth PFP 18- With safety seal (CHILD-PROFF "CHILD-SAVING" SEAL Packaged in thermopack of 104 pieces
YELLOW GLASS FLACON : 30 ml - DIAM. 34 mm - h = 73.2 mm MOUTH PFP18 BOTTLE CONTAINER WHITE PLASTIC CLOSURE CAPS -Mouth PFP 18- With safety seal (CHILD-PROFF "CHILD-SAVING" SEAL Packaged in thermopack of 104 pieces
€0.45Price
€0.45Price
YELLOW GLASS FLACON : 20 ml -DIAM. 30 mm- MOUTH PFP18 MOUTH PFP 18 RASO CONTAINER WHITE PLASTIC CLOSURE CAPS -MOUTH PFP 18- With safety seal (CHILD-PROOF "CHILD SAVING" SEAL) Packaged in thermopack of 135 pieces
€0.45Price
YELLOW GLASS FLACON : 20 ml -DIAM. 30 mm- MOUTH PFP18 MOUTH PFP 18 RASO CONTAINER WHITE PLASTIC CLOSURE CAPS -MOUTH PFP 18- With safety seal (CHILD-PROOF "CHILD SAVING" SEAL) Packaged in thermopack of 135 pieces
YELLOW GLASS FLACON : 20 ml -DIAM. 30 mm- MOUTH PFP18 MOUTH PFP 18 RASO CONTAINER WHITE PLASTIC CLOSURE CAPS -MOUTH PFP 18- With safety seal (CHILD-PROOF "CHILD SAVING" SEAL) Packaged in thermopack of 135 pieces
€0.45Price
€1.60Price
FLACON : 10 ml - Ø 25 mm - h 58.5 mm - Mouth PFP 18 LARINGEAN LONG RECLINING SPRAY - draw straw 5 cm Packaged in thermopack of 170 pieces - SEE Quantity Discount
€1.60Price
FLACON : 10 ml - Ø 25 mm - h 58.5 mm - Mouth PFP 18 LARINGEAN LONG RECLINING SPRAY - draw straw 5 cm Packaged in thermopack of 170 pieces - SEE Quantity Discount
FLACON : 10 ml - Ø 25 mm - h 58.5 mm - Mouth PFP 18 LARINGEAN LONG RECLINING SPRAY - draw straw 5 cm Packaged in thermopack of 170 pieces - SEE Quantity Discount
€1.60Price
€0.50Price
GLASS CONTAINER for 125 mL yellow bottles - with SECURITY SEAL FOR INTEGRITY PACKAGE - PFP 28 MOUTH - Length 10 cm Bag of 63 pieces
€0.50Price
GLASS CONTAINER for 125 mL yellow bottles - with SECURITY SEAL FOR INTEGRITY PACKAGE - PFP 28 MOUTH - Length 10 cm Bag of 63 pieces
GLASS CONTAINER for 125 mL yellow bottles - with SECURITY SEAL FOR INTEGRITY PACKAGE - PFP 28 MOUTH - Length 10 cm Bag of 63 pieces
€0.50Price
€0.46Price
GLASS CONTAINER for 10-mL BLUE bottles - with SECURITY SEAL FOR PACK INTEGRITY - GL 18 BOTTLE For 10-mL Blue glass bottles (SI RBLU10F)
€0.46Price
GLASS CONTAINER for 10-mL BLUE bottles - with SECURITY SEAL FOR PACK INTEGRITY - GL 18 BOTTLE For 10-mL Blue glass bottles (SI RBLU10F)
GLASS CONTAINER for 10-mL BLUE bottles - with SECURITY SEAL FOR PACK INTEGRITY - GL 18 BOTTLE For 10-mL Blue glass bottles (SI RBLU10F)
€0.46Price
€6.60Price
Plastic round hole grid for pollen trap, smooth, 8-hole series. Dim: hole diameter 4 mm.; height 110 mm.; length 385 mm.; thickness 2 mm. For replacement pollen trap (code LA 2400).
€6.60Price
Plastic round hole grid for pollen trap, smooth, 8-hole series. Dim: hole diameter 4 mm.; height 110 mm.; length 385 mm.; thickness 2 mm. For replacement pollen trap (code LA 2400).
Plastic round hole grid for pollen trap, smooth, 8-hole series. Dim: hole diameter 4 mm.; height 110 mm.; length 385 mm.; thickness 2 mm. For replacement pollen trap (code LA 2400).
€6.60Price
€62.00Price
Metal SUPPORT for kg.400 ripener - Ø 630 mm Painted red
€62.00Price
Metal SUPPORT for kg.400 ripener - Ø 630 mm Painted red
Metal SUPPORT for kg.400 ripener - Ø 630 mm Painted red
€62.00Price
€18.00Price
Roller for uncapping nest frames, breaking cells in apiary and stimulating bee families PROFESSIONAL roller with FLEXIBLE PLASTIC TEETH Roller length 14 cm
€18.00Price
Roller for uncapping nest frames, breaking cells in apiary and stimulating bee families PROFESSIONAL roller with FLEXIBLE PLASTIC TEETH Roller length 14 cm
Roller for uncapping nest frames, breaking cells in apiary and stimulating bee families PROFESSIONAL roller with FLEXIBLE PLASTIC TEETH Roller length 14 cm
€18.00Price
€75.00Price
MANUAL TRANSMISSION for Extractor with DISCONNECTOR and BRAKE (CE MARK)-ROTATION in ONE WAY SET with : CRANK HANDLE WITH BAR FOR EXTRACTOR DIAM. 620 mm STEEL 9-PRIMES GEARS suitable for 16 mm shaft coupling (SHAFT SHAFT NOT INCLUDED)
€75.00Price
MANUAL TRANSMISSION for Extractor with DISCONNECTOR and BRAKE (CE MARK)-ROTATION in ONE WAY SET with : CRANK HANDLE WITH BAR FOR EXTRACTOR DIAM. 620 mm STEEL 9-PRIMES GEARS suitable for 16 mm shaft coupling (SHAFT SHAFT NOT INCLUDED)
MANUAL TRANSMISSION for Extractor with DISCONNECTOR and BRAKE (CE MARK)-ROTATION in ONE WAY SET with : CRANK HANDLE WITH BAR FOR EXTRACTOR DIAM. 620 mm STEEL 9-PRIMES GEARS suitable for 16 mm shaft coupling (SHAFT SHAFT NOT INCLUDED)
€75.00Price
€3.80Price
ROTUNDA CAN in white plastic - 8 L capacity for 10/11 kg of honeyHermetically sealed lid with safety bandPlastic handle
€3.80Price
ROTUNDA CAN in white plastic - 8 L capacity for 10/11 kg of honeyHermetically sealed lid with safety bandPlastic handle
ROTUNDA CAN in white plastic - 8 L capacity for 10/11 kg of honeyHermetically sealed lid with safety bandPlastic handle
€3.80Price
€22.00Price
Queen Catcher with Queen Locking Fork for Marking The fork allows the queen bee to be locked onto the honeycomb for marking. The queen bee is captured and made to lodge in the transport kit. Then it is introduced into the brood block mooted cage (MO 001) by means of this queen catcher.
€22.00Price
Queen Catcher with Queen Locking Fork for Marking The fork allows the queen bee to be locked onto the honeycomb for marking. The queen bee is captured and made to lodge in the transport kit. Then it is introduced into the brood block mooted cage (MO 001) by means of this queen catcher.
Queen Catcher with Queen Locking Fork for Marking The fork allows the queen bee to be locked onto the honeycomb for marking. The queen bee is captured and made to lodge in the transport kit. Then it is introduced into the brood block mooted cage (MO 001) by means of this queen catcher.
€22.00Price
€9.50Price
UNWINDING for 500 g spools with attachment to hanging stand
€9.50Price
UNWINDING for 500 g spools with attachment to hanging stand
UNWINDING for 500 g spools with attachment to hanging stand
€9.50Price
€1.10Price
Fitted and perforated honey super CANVAS with ZINCED wire for D.B. Beehives.
€1.10Price
Fitted and perforated honey super CANVAS with ZINCED wire for D.B. Beehives.
Fitted and perforated honey super CANVAS with ZINCED wire for D.B. Beehives.
€1.10Price
€6.30Price
€6.30Price
€6.30Price
€1.05Price
Cardboard gift box for No. 2 1 kg honey jars (780 ml) In ONDULATED CANNET series BROWN Size: 10 x 20 x h 15 cm SEE QUANTITY DISCOUNT
€1.05Price
Cardboard gift box for No. 2 1 kg honey jars (780 ml) In ONDULATED CANNET series BROWN Size: 10 x 20 x h 15 cm SEE QUANTITY DISCOUNT
Cardboard gift box for No. 2 1 kg honey jars (780 ml) In ONDULATED CANNET series BROWN Size: 10 x 20 x h 15 cm SEE QUANTITY DISCOUNT
€1.05Price
APILIFE VAR- a product against varroa whose main active substance is thymol , package containing No. 2 tablets. product characteristics in the section (DOWNLOAD)
€2.60Price
APILIFE VAR- a product against varroa whose main active substance is thymol , package containing No. 2 tablets. product characteristics in the section (DOWNLOAD)
€2.60Price
€2.60Price
APILIFE VAR-a product against varroa whose main active substance is thymol. AUTHORIZED PRODUCT for VETERINARY USE THIS PRODUCT CAN ONLY BE SOLD IN ITALY Technical data sheet see attached.
€2.60Price
APILIFE VAR-a product against varroa whose main active substance is thymol. AUTHORIZED PRODUCT for VETERINARY USE THIS PRODUCT CAN ONLY BE SOLD IN ITALY Technical data sheet see attached.
APILIFE VAR-a product against varroa whose main active substance is thymol. AUTHORIZED PRODUCT for VETERINARY USE THIS PRODUCT CAN ONLY BE SOLD IN ITALY Technical data sheet see attached.
€2.60Price
€0.32Price
Cell holder complete with cap - NICOT - BSyou put the natural royal cell inside the cell holder and secure it with the cap. By doing so, you can attach it to the fixing block-(HY G-0007)-If you want to birth the virgin queen, you can attach the queen excluder cage (HY G-0011)
€0.32Price
Cell holder complete with cap - NICOT - BSyou put the natural royal cell inside the cell holder and secure it with the cap. By doing so, you can attach it to the fixing block-(HY G-0007)-If you want to birth the virgin queen, you can attach the queen excluder cage (HY G-0011)
Cell holder complete with cap - NICOT - BSyou put the natural royal cell inside the cell holder and secure it with the cap. By doing so, you can attach it to the fixing block-(HY G-0007)-If you want to birth the virgin queen, you can attach the queen excluder cage (HY G-0011)
€0.32Price
€0.27Price
41 ml CYLINDRICAL glass jar for 50 g HONEY (mouth diameter 43 cm)
H = 50 mm - Diam. = 43.3 mm - Weight = 63 g
For CAPSULES:
- CLASSIC FLAT
- FLIP PASTEURIZATION
- FLIP STERILIZATION
€0.27Price
41 ml CYLINDRICAL glass jar for 50 g HONEY (mouth diameter 43 cm)
H = 50 mm - Diam. = 43.3 mm - Weight = 63 g
For CAPSULES:
- CLASSIC FLAT
- FLIP PASTEURIZATION
- FLIP STERILIZATION
41 ml CYLINDRICAL glass jar for 50 g HONEY (mouth diameter 43 cm)
H = 50 mm - Diam. = 43.3 mm - Weight = 63 g
For CAPSULES:
- CLASSIC FLAT
- FLIP PASTEURIZATION
- FLIP STERILIZATION
€0.27Price
€0.32Price
212 ml glass jar for 250 g smooth honey (mouth diameter 63 mm)
H = 85.5 mm, diameter = 66.8 mm, weight = 145 g
In 28-piece heat-sealed containers
For CAPSULES:
- CLASSIC FLAT
- PASTEURIZATION WITH FLIP
- STERILIZATION WITH FLIP
€0.32Price
212 ml glass jar for 250 g smooth honey (mouth diameter 63 mm)
H = 85.5 mm, diameter = 66.8 mm, weight = 145 g
In 28-piece heat-sealed containers
For CAPSULES:
- CLASSIC FLAT
- PASTEURIZATION WITH FLIP
- STERILIZATION WITH FLIP
212 ml glass jar for 250 g smooth honey (mouth diameter 63 mm)
H = 85.5 mm, diameter = 66.8 mm, weight = 145 g
In 28-piece heat-sealed containers
For CAPSULES:
- CLASSIC FLAT
- PASTEURIZATION WITH FLIP
- STERILIZATION WITH FLIP
€0.32Price
€132.00Price
LAYENS Tangential stainless steel honey extractor 4-frame or 8-frame Honey super D.B. or 4-frame nest D.B. Extractor diameter 620 mm Shaft bushing diameter 16 mm Pocket height 43 cm
€132.00Price
LAYENS Tangential stainless steel honey extractor 4-frame or 8-frame Honey super D.B. or 4-frame nest D.B. Extractor diameter 620 mm Shaft bushing diameter 16 mm Pocket height 43 cm
LAYENS Tangential stainless steel honey extractor 4-frame or 8-frame Honey super D.B. or 4-frame nest D.B. Extractor diameter 620 mm Shaft bushing diameter 16 mm Pocket height 43 cm
€132.00Price
€149.00Price
Holder and switch for DANA api MATIC 1000/2000+/3000 honey metering machine
€149.00Price
Holder and switch for DANA api MATIC 1000/2000+/3000 honey metering machine
Holder and switch for DANA api MATIC 1000/2000+/3000 honey metering machine
€149.00Price
HOT MIXER with turbo agitator for liquids-400V-4.5 Kw Loading capacity lt. 150. 2Hp turbo agitator motor. Timer for max cycle duration. Motorized vertical opening. Total discharge. Heating with insulation. Membrane controls. 400V-4.5Kw power supply. IDEAL FOR PREPARING LIQUID SYRUP FOR BEES .
€13,400.00Price
HOT MIXER with turbo agitator for liquids-400V-4.5 Kw Loading capacity lt. 150. 2Hp turbo agitator motor. Timer for max cycle duration. Motorized vertical opening. Total discharge. Heating with insulation. Membrane controls. 400V-4.5Kw power supply. IDEAL FOR PREPARING LIQUID SYRUP FOR BEES .
€13,400.00Price
€13,400.00Price
Hot mixer with turbo agitator for liquids-400V-4.5 Kw
Hot mixer with turbo agitator for liquids-400V-4.5 Kw
€13,400.00Price
€14.00Price
Replacement small nylon SACCO FILTER for hopper filter - (for filter code QI F05 and QI F06) - 300-micron mesh Diameter: 10 cm Length: 45 cm With fastening strings
€14.00Price
Replacement small nylon SACCO FILTER for hopper filter - (for filter code QI F05 and QI F06) - 300-micron mesh Diameter: 10 cm Length: 45 cm With fastening strings
Replacement small nylon SACCO FILTER for hopper filter - (for filter code QI F05 and QI F06) - 300-micron mesh Diameter: 10 cm Length: 45 cm With fastening strings
€14.00Price
REVERSIBLE Extractor D.B. 15 honeycomb from nest or , 30 honeycomb from apple or 15 honeycomb layent-Ø1600-230V 1.5Kw-Ø1600 Drum n stainless steel sp.1mm- Finished in stainless steel flecked or satin( according to availability), stainless steel reinforcement bands. Full drain with 3" sleeve faucet excluded(code QI R27I). 4 stainless steel legs. Double upper bar for fixing stainless steel shaft bearing. Reversible stainless steel basket loading capacity with 15 nest frames or 30 D.B. Honey super frames or 15 layent frames. 4 opening points at lid. 1.5Kw- motor housed under the drum( stainless steel motor supports ). Speed reducer applied on de basket shaft. Electronic programming with membrane control panel. Motor lock. Safety locks at the covers. Stainless steel electrical panel support (optional). Machine weight empty Kg 220. Power supply 230V- 1.5Kw.
€10,000.00Price
REVERSIBLE Extractor D.B. 15 honeycomb from nest or , 30 honeycomb from apple or 15 honeycomb layent-Ø1600-230V 1.5Kw-Ø1600 Drum n stainless steel sp.1mm- Finished in stainless steel flecked or satin( according to availability), stainless steel reinforcement bands. Full drain with 3" sleeve faucet excluded(code QI R27I). 4 stainless steel legs. Double upper bar for fixing stainless steel shaft bearing. Reversible stainless steel basket loading capacity with 15 nest frames or 30 D.B. Honey super frames or 15 layent frames. 4 opening points at lid. 1.5Kw- motor housed under the drum( stainless steel motor supports ). Speed reducer applied on de basket shaft. Electronic programming with membrane control panel. Motor lock. Safety locks at the covers. Stainless steel electrical panel support (optional). Machine weight empty Kg 220. Power supply 230V- 1.5Kw.
€10,000.00Price
€10,000.00Price
REVERSIBLE Extractor D.B. 15 honeycomb from nest or , 30 from apple or 15 honeycomb LAYENT -Ø 1600 mm - 230V - 1.5Kw
€10,000.00Price
REVERSIBLE Extractor D.B. 15 honeycomb from nest or , 30 from apple or 15 honeycomb LAYENT -Ø 1600 mm - 230V - 1.5Kw
REVERSIBLE Extractor D.B. 15 honeycomb from nest or , 30 from apple or 15 honeycomb LAYENT -Ø 1600 mm - 230V - 1.5Kw
€10,000.00Price
€12.00Price
WELDING FITTING for GAROLLA 50 mm/2" for honey food pipe
€12.00Price
WELDING FITTING for GAROLLA 50 mm/2" for honey food pipe
WELDING FITTING for GAROLLA 50 mm/2" for honey food pipe
€12.00Price
€450.00Price
RADIAL D.B. MANUAL EXTRACTOR NYLON basket - 620 mm - for 18 Honey super frames or (3 from nest with additional cages) -Nylon cutter tap diam. 40 mm For nest combs, No. 3 additional cages not included are required (QI Cod. G06) Nylon basket (QI Cod. C46)
€450.00Price
RADIAL D.B. MANUAL EXTRACTOR NYLON basket - 620 mm - for 18 Honey super frames or (3 from nest with additional cages) -Nylon cutter tap diam. 40 mm For nest combs, No. 3 additional cages not included are required (QI Cod. G06) Nylon basket (QI Cod. C46)
RADIAL D.B. MANUAL EXTRACTOR NYLON basket - 620 mm - for 18 Honey super frames or (3 from nest with additional cages) -Nylon cutter tap diam. 40 mm For nest combs, No. 3 additional cages not included are required (QI Cod. G06) Nylon basket (QI Cod. C46)
€450.00Price
Optional variable speed motorization : - MOTOR REG.ELECTRONIC + 510 € (Cod. QI S134) Extractors "KIT" Free wheel transmission and brake Transparent polycarbonate lids fixed with hinges Transmission holder crossbeam and lids, stainless steel Castle in stainless steel or nylon with fiberglass Thrust bearing for shaft in BRONZE Rounded bottom with semi-total discharge Stainless steel full diameter filter Stainless steel tie( art. QI S51-52-S109-S110-S111-S117-S123) Stainless steel mellower 90 kg with tap art. QI R11-stainless steel handles Stainless steel hardware
€450.00Price
Optional variable speed motorization : - MOTOR REG.ELECTRONIC + 510 € (Cod. QI S134) Extractors "KIT" Free wheel transmission and brake Transparent polycarbonate lids fixed with hinges Transmission holder crossbeam and lids, stainless steel Castle in stainless steel or nylon with fiberglass Thrust bearing for shaft in BRONZE Rounded bottom with semi-total discharge Stainless steel full diameter filter Stainless steel tie( art. QI S51-52-S109-S110-S111-S117-S123) Stainless steel mellower 90 kg with tap art. QI R11-stainless steel handles Stainless steel hardware
€450.00Price
€450.00Price
LANGSTROTH TANGENTIAL EXTRACTOR KIT for 4 honeycombs- stainless basket (Code QI C55) - full-diameter stainless filter- 90 kg ripener- with stainless handles - diameter 525 mm
€450.00Price
LANGSTROTH TANGENTIAL EXTRACTOR KIT for 4 honeycombs- stainless basket (Code QI C55) - full-diameter stainless filter- 90 kg ripener- with stainless handles - diameter 525 mm
LANGSTROTH TANGENTIAL EXTRACTOR KIT for 4 honeycombs- stainless basket (Code QI C55) - full-diameter stainless filter- 90 kg ripener- with stainless handles - diameter 525 mm
€450.00Price
Extractor series 2008-27/3 radial for 27 Honey super frames or 3 Tangential nest frames with 'use of additional cages not included) or 15 frames langstroth-Kw 0.37-230V, with electronic programmer. IS A NEW SERIES OF EQUIPMENT DESIGNED FOR "MONOBLOCK" HONEY EXTRACTION. In one machine, you have everything you need in a honey extraction room, uncapping ,operculum treatment , accumulation of uncapped combs , honey extraction and decanting of honey. The most obvious advantages are: smaller footprint, convenience in processing steps, with higher yield and reduction of 'inevitable dripping of honey on the floor. The 2008 series is produced in different versions from the hobbyist beekeeper to the professional. The model series 2008/45 professional , the top of the range comes with: a large bench for uncapping , complete with uncapping machine with automatic unloader of combs and accumulator, electronically controlled centrifuge for opercula, a collector for uncapped frames, an extractor of 45 honeycombs D.B. from Honey super or 20 from nest controlled by a sophisticated software that can manage the extraction cycle independently, a decanting tank with filter that can be heated, preparation of pump for transferring honey into containers .
€3,900.00Price
Extractor series 2008-27/3 radial for 27 Honey super frames or 3 Tangential nest frames with 'use of additional cages not included) or 15 frames langstroth-Kw 0.37-230V, with electronic programmer. IS A NEW SERIES OF EQUIPMENT DESIGNED FOR "MONOBLOCK" HONEY EXTRACTION. In one machine, you have everything you need in a honey extraction room, uncapping ,operculum treatment , accumulation of uncapped combs , honey extraction and decanting of honey. The most obvious advantages are: smaller footprint, convenience in processing steps, with higher yield and reduction of 'inevitable dripping of honey on the floor. The 2008 series is produced in different versions from the hobbyist beekeeper to the professional. The model series 2008/45 professional , the top of the range comes with: a large bench for uncapping , complete with uncapping machine with automatic unloader of combs and accumulator, electronically controlled centrifuge for opercula, a collector for uncapped frames, an extractor of 45 honeycombs D.B. from Honey super or 20 from nest controlled by a sophisticated software that can manage the extraction cycle independently, a decanting tank with filter that can be heated, preparation of pump for transferring honey into containers .
€3,900.00Price
€3,900.00Price
Extractor series 2008-27/3 radial for 27 Honey super frames or 3 Tangential brood frames with 'use of additional cages not included) or 15 frames langstroth-Kw 0.37-230V, with electronic programmer
€3,900.00Price
Extractor series 2008-27/3 radial for 27 Honey super frames or 3 Tangential brood frames with 'use of additional cages not included) or 15 frames langstroth-Kw 0.37-230V, with electronic programmer
Extractor series 2008-27/3 radial for 27 Honey super frames or 3 Tangential brood frames with 'use of additional cages not included) or 15 frames langstroth-Kw 0.37-230V, with electronic programmer
€3,900.00Price
€400.00Price
Wax or WINE OPERATOR - Ø 35 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High-strength steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents. Dimensions : Cage 35 x 50 cm - capacity 48 L Screw diameter 40 mm Weight 57 Kg MADE IN ITALY
€400.00Price
Wax or WINE OPERATOR - Ø 35 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High-strength steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents. Dimensions : Cage 35 x 50 cm - capacity 48 L Screw diameter 40 mm Weight 57 Kg MADE IN ITALY
Wax or WINE OPERATOR - Ø 35 cm - Ratchet with 1-speed mechanical movement - Pressed steel basin - High-strength steel screw - Beech wood staves fixed with through bolts - equipped with 6 caps and 2 crescents. Dimensions : Cage 35 x 50 cm - capacity 48 L Screw diameter 40 mm Weight 57 Kg MADE IN ITALY
€400.00Price
Total Drain The wax separator is a kettle with the temperature set manually.It has 3 drains , one at the bottom (total drain) one higher than the total drain and the third even higher than the other 2.Depending on how you adjust the temperature the separation between operculum and honey takes place.The kettle can have feet for support.It has double insulated walls.A dust cover.3 taps.The use of diathermic oil (not supplied) is recommended.
€7,100.00Price
Total Drain The wax separator is a kettle with the temperature set manually.It has 3 drains , one at the bottom (total drain) one higher than the total drain and the third even higher than the other 2.Depending on how you adjust the temperature the separation between operculum and honey takes place.The kettle can have feet for support.It has double insulated walls.A dust cover.3 taps.The use of diathermic oil (not supplied) is recommended.
€7,100.00Price
€7,100.00Price
600Kg insulated double chamber stainless steel WASER or SEPARATOR WASER/HONEY BOILER - Alim. 230V-4500W
€7,100.00Price
600Kg insulated double chamber stainless steel WASER or SEPARATOR WASER/HONEY BOILER - Alim. 230V-4500W
600Kg insulated double chamber stainless steel WASER or SEPARATOR WASER/HONEY BOILER - Alim. 230V-4500W
€7,100.00Price
€0.50Price
Label dimensions: 7 x 4 cm
With hemp string
Excellent for gift cards, decorating jars and bags
€0.50Price
Label dimensions: 7 x 4 cm
With hemp string
Excellent for gift cards, decorating jars and bags
Label dimensions: 7 x 4 cm
With hemp string
Excellent for gift cards, decorating jars and bags
€0.50Price
€0.16Price
Black plastic cap for 10 ml glass bottle for royal jelly (Code FO 3743) PFP 18 opening without safety seal
Packaging: 170 pieces
€0.16Price
Black plastic cap for 10 ml glass bottle for royal jelly (Code FO 3743) PFP 18 opening without safety seal
Packaging: 170 pieces
Black plastic cap for 10 ml glass bottle for royal jelly (Code FO 3743) PFP 18 opening without safety seal
Packaging: 170 pieces
€0.16Price
€15.00Price
Milled Brass Letters for Fire Branding Letter A to Z
Suitable for "gas" fire brander with burner (code PI 0051)
Choose Letter
€15.00Price
Milled Brass Letters for Fire Branding Letter A to Z
Suitable for "gas" fire brander with burner (code PI 0051)
Choose Letter
Milled Brass Letters for Fire Branding Letter A to Z
Suitable for "gas" fire brander with burner (code PI 0051)
Choose Letter
€15.00Price
€2.40Price
White bottle in PET of 1.000 ml with grill spray in white plastic, private of metal, 100% riciclabile - not for food use
€2.40Price
White bottle in PET of 1.000 ml with grill spray in white plastic, private of metal, 100% riciclabile - not for food use
White bottle in PET of 1.000 ml with grill spray in white plastic, private of metal, 100% riciclabile - not for food use
€2.40Price
€10.80Price
Large beeswax-based candleDiameter: 5.5 cmHeight: 17.5 cm-Weight: 403 gMADE IN ITALY
€10.80Price
Large beeswax-based candleDiameter: 5.5 cmHeight: 17.5 cm-Weight: 403 gMADE IN ITALY
Large beeswax-based candleDiameter: 5.5 cmHeight: 17.5 cm-Weight: 403 gMADE IN ITALY
€10.80Price
€34.00Price
Bucket manufactured from sturdy food-grade plastic with lid and plastic spigot diameter 40 mm
Dimensions: 42 × 42 × 53 cm
For 60 kg of honey
€34.00Price
Bucket manufactured from sturdy food-grade plastic with lid and plastic spigot diameter 40 mm
Dimensions: 42 × 42 × 53 cm
For 60 kg of honey
Bucket manufactured from sturdy food-grade plastic with lid and plastic spigot diameter 40 mm
Dimensions: 42 × 42 × 53 cm
For 60 kg of honey
€34.00Price
Modes of operation Preliminary operations to be performed before using the machine: Make sure to place the machine on a surface stabile Make sure to connect the gear pump to the motor shaft, so as to deactivate the safety interlock that interrupts the circuit of alimentazione Connect the plug to the power supply (230VAC) Press the power button on the back of the machine to position 1 The machine can operate in the following modes of operation: POMPA DOSATORE CALIBRATION The machine can detect malfunctioning conditions, generating alarms that stop pump operation.
€3,200.00Price
Modes of operation Preliminary operations to be performed before using the machine: Make sure to place the machine on a surface stabile Make sure to connect the gear pump to the motor shaft, so as to deactivate the safety interlock that interrupts the circuit of alimentazione Connect the plug to the power supply (230VAC) Press the power button on the back of the machine to position 1 The machine can operate in the following modes of operation: POMPA DOSATORE CALIBRATION The machine can detect malfunctioning conditions, generating alarms that stop pump operation.
€3,200.00Price
€3,200.00Price
Electronically controlled gear pumpDosing range: 10g - 10 kgMeasuring unit: g/kg/ozPower supply: 230VAC - 50HzDimensions Mm: - Length 467 width 300 height 364Included accessories:- 11/2 elbow pipe- 2 dispenser support brackets with adjustable feet- Jar support shelf- Start pedal with cable for motor-rotary table connection- Anti-drip valve kit Accessories not included: Any wiring for loader, rotary table, pipe and clamps, attachments/rubbers for ripeners, mixers, funnel, steel nozzles, micro photocell switch and bracket. INSTRUCTION MANUAL: see attached.
€3,200.00Price
Electronically controlled gear pumpDosing range: 10g - 10 kgMeasuring unit: g/kg/ozPower supply: 230VAC - 50HzDimensions Mm: - Length 467 width 300 height 364Included accessories:- 11/2 elbow pipe- 2 dispenser support brackets with adjustable feet- Jar support shelf- Start pedal with cable for motor-rotary table connection- Anti-drip valve kit Accessories not included: Any wiring for loader, rotary table, pipe and clamps, attachments/rubbers for ripeners, mixers, funnel, steel nozzles, micro photocell switch and bracket. INSTRUCTION MANUAL: see attached.
Electronically controlled gear pumpDosing range: 10g - 10 kgMeasuring unit: g/kg/ozPower supply: 230VAC - 50HzDimensions Mm: - Length 467 width 300 height 364Included accessories:- 11/2 elbow pipe- 2 dispenser support brackets with adjustable feet- Jar support shelf- Start pedal with cable for motor-rotary table connection- Anti-drip valve kit Accessories not included: Any wiring for loader, rotary table, pipe and clamps, attachments/rubbers for ripeners, mixers, funnel, steel nozzles, micro photocell switch and bracket. INSTRUCTION MANUAL: see attached.
€3,200.00Price
It is used by inserting the queen, inside the isolator the time necessary for brood blocking.It allows the queen to continue laying but only on the honeycomb isolated from the cover Varroa fight with Biological Method
€4.50Price
It is used by inserting the queen, inside the isolator the time necessary for brood blocking.It allows the queen to continue laying but only on the honeycomb isolated from the cover Varroa fight with Biological Method
€4.50Price
€4.50Price
Recyclable food-grade plastic cable - PS - for Honey super D.B. For use with insulator (Art. QI I12) to obtain insulator to cage the queen, for brood blockingStandard size : L 470 x H 160 x Sp. 25 mm - Weight 335 gAttention the side on which to apply the insulator is the deepest ( about 13 mm )If waxed, it is better and faster built up by the bees(N.B.: Can be used as a normal Honey super D.B. frame).
€4.50Price
Recyclable food-grade plastic cable - PS - for Honey super D.B. For use with insulator (Art. QI I12) to obtain insulator to cage the queen, for brood blockingStandard size : L 470 x H 160 x Sp. 25 mm - Weight 335 gAttention the side on which to apply the insulator is the deepest ( about 13 mm )If waxed, it is better and faster built up by the bees(N.B.: Can be used as a normal Honey super D.B. frame).
Recyclable food-grade plastic cable - PS - for Honey super D.B. For use with insulator (Art. QI I12) to obtain insulator to cage the queen, for brood blockingStandard size : L 470 x H 160 x Sp. 25 mm - Weight 335 gAttention the side on which to apply the insulator is the deepest ( about 13 mm )If waxed, it is better and faster built up by the bees(N.B.: Can be used as a normal Honey super D.B. frame).
€4.50Price
€8.80Price
€8.80Price
Natural jute combustible beekeeping roll about kg 1 - 25 mt
To be used for beekeeping smoker for durability of smoke and easy ignition.
€8.80Price
Natural jute combustible beekeeping roll about kg 1 - 25 mt
To be used for beekeeping smoker for durability of smoke and easy ignition.
Natural jute combustible beekeeping roll about kg 1 - 25 mt
To be used for beekeeping smoker for durability of smoke and easy ignition.
€8.80Price
€3.30Price
STAINLESS STEEL SPACERLength: 42.5 cmFor D.B. 10-frame beehives with 10 notches 25 mm (Honey super)To be inserted in the nest instead of normal spacers - can be put on and taken off without fixing , for collection of propolis puliton° 1 single piece
€3.30Price
STAINLESS STEEL SPACERLength: 42.5 cmFor D.B. 10-frame beehives with 10 notches 25 mm (Honey super)To be inserted in the nest instead of normal spacers - can be put on and taken off without fixing , for collection of propolis puliton° 1 single piece
STAINLESS STEEL SPACERLength: 42.5 cmFor D.B. 10-frame beehives with 10 notches 25 mm (Honey super)To be inserted in the nest instead of normal spacers - can be put on and taken off without fixing , for collection of propolis puliton° 1 single piece
€3.30Price
€2.50Price
Plastic queen excluder for Langstroth Beehive - 42.5 x 51 cm
€2.50Price
Plastic queen excluder for Langstroth Beehive - 42.5 x 51 cm
Plastic queen excluder for Langstroth Beehive - 42.5 x 51 cm
€2.50Price
€1.20Price
Mounted and perforated honey super CANVAS with ZINCED wire for D.B. Beehives.
€1.20Price
Mounted and perforated honey super CANVAS with ZINCED wire for D.B. Beehives.
Mounted and perforated honey super CANVAS with ZINCED wire for D.B. Beehives.
€1.20Price
€7.30Price
Vinyl leather and wood adaptable replacement mantle for 8 cm diameter smokers (code FO 2020 , FO 2020A ) 10 cm diameter smokers (code FO 2030 , FO 2030A , FO 2040 )
€7.30Price
Vinyl leather and wood adaptable replacement mantle for 8 cm diameter smokers (code FO 2020 , FO 2020A ) 10 cm diameter smokers (code FO 2030 , FO 2030A , FO 2040 )
Vinyl leather and wood adaptable replacement mantle for 8 cm diameter smokers (code FO 2020 , FO 2020A ) 10 cm diameter smokers (code FO 2030 , FO 2030A , FO 2040 )
€7.30Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€22.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€22.00Price
€22.00Price
Silicone candle mold with bee on honeycomb Mold height: 35 mm - Wick: 3 mmWeight: 40 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€22.00Price
Silicone candle mold with bee on honeycomb Mold height: 35 mm - Wick: 3 mmWeight: 40 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
Silicone candle mold with bee on honeycomb Mold height: 35 mm - Wick: 3 mmWeight: 40 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene wax, epoxy resin, soap base.They are not suitable for food production.
€22.00Price