€4,350.00Regular price-€450.00€4,800.00Price
Special Products
Featured Products
Subcategory
Honey super mounted size: 28.50cm x 50cm
€11.00Price
Honey super mounted size: 28.50cm x 50cm
€11.00Price
€11.00Price
Wood Honey super for 6-frame Dadant Blatt Beehives disassembled. Consists of 4 unpainted sides, 2 6-notch spacers and 12 wood screws 4.0 x 60/35mm
€11.00Price
Wood Honey super for 6-frame Dadant Blatt Beehives disassembled. Consists of 4 unpainted sides, 2 6-notch spacers and 12 wood screws 4.0 x 60/35mm
Wood Honey super for 6-frame Dadant Blatt Beehives disassembled. Consists of 4 unpainted sides, 2 6-notch spacers and 12 wood screws 4.0 x 60/35mm
€11.00Price
€1.20Price
Round plastic two-way APISCAMPO (without tablet) For wooden beehives Bee escape tablet D.B. 10, 12 and 6 frames
€1.20Price
Round plastic two-way APISCAMPO (without tablet) For wooden beehives Bee escape tablet D.B. 10, 12 and 6 frames
Round plastic two-way APISCAMPO (without tablet) For wooden beehives Bee escape tablet D.B. 10, 12 and 6 frames
€1.20Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€26.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€26.80Price
€26.80Price
Mold height: 60 mm - Wick: 3 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€26.80Price
Mold height: 60 mm - Wick: 3 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 60 mm - Wick: 3 mm - Weight: 30 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€26.80Price
The position of the central hole, into which all the liquid product flows due to the sloping bottom, allows you to also place a 1 L round feeder, or use it as it comes complete with a transparent plastic cover bell (Art. QI C97). For solid food (paste candy), it is used without a bell by directly placing the bag of paste candy (previously cutting on the bag, a disk equal to the diameter of the bell) instead of the bell the bees pass through the side slits feeding without finding obstacles due to the position of the bag, or in the case that, bulk candy is used, it is placed inside the feeder always without a bell.
€9.30Price
The position of the central hole, into which all the liquid product flows due to the sloping bottom, allows you to also place a 1 L round feeder, or use it as it comes complete with a transparent plastic cover bell (Art. QI C97). For solid food (paste candy), it is used without a bell by directly placing the bag of paste candy (previously cutting on the bag, a disk equal to the diameter of the bell) instead of the bell the bees pass through the side slits feeding without finding obstacles due to the position of the bag, or in the case that, bulk candy is used, it is placed inside the feeder always without a bell.
€9.30Price
€9.30Price
Light blue polystyrene cover feeder for 6-frame D.B. Beehives (Cod. QI A41 - QI A89- QI A103 - QI A77- QI A105 - QI A97 Langstroth)Complete with clear plastic cover bell - - Replacement bell (cod. QI C97) - Capacity 3 Liters Replacement Vulcanello (QI C107)A new shape makes it unique and practical for feeding candy in pouches or not, or liquid food.
€9.30Price
Light blue polystyrene cover feeder for 6-frame D.B. Beehives (Cod. QI A41 - QI A89- QI A103 - QI A77- QI A105 - QI A97 Langstroth)Complete with clear plastic cover bell - - Replacement bell (cod. QI C97) - Capacity 3 Liters Replacement Vulcanello (QI C107)A new shape makes it unique and practical for feeding candy in pouches or not, or liquid food.
Light blue polystyrene cover feeder for 6-frame D.B. Beehives (Cod. QI A41 - QI A89- QI A103 - QI A77- QI A105 - QI A97 Langstroth)Complete with clear plastic cover bell - - Replacement bell (cod. QI C97) - Capacity 3 Liters Replacement Vulcanello (QI C107)A new shape makes it unique and practical for feeding candy in pouches or not, or liquid food.
€9.30Price
€7.80Price
REGINA MARK FLACON single colors or all 5 colors WITH ROUND PLASTIC QUEEN STAMP COLORS : WHITE (Year 2016-2021-2026) COLORS : YELLOW (Year 2017-2022-2027) COLORS : RED (Year 2018-2023-2028) COLORS : GREEN (Year 2019-2024-2029) COLORS : BLUE (Year 2020-2025-2030)
€7.80Price
REGINA MARK FLACON single colors or all 5 colors WITH ROUND PLASTIC QUEEN STAMP COLORS : WHITE (Year 2016-2021-2026) COLORS : YELLOW (Year 2017-2022-2027) COLORS : RED (Year 2018-2023-2028) COLORS : GREEN (Year 2019-2024-2029) COLORS : BLUE (Year 2020-2025-2030)
REGINA MARK FLACON single colors or all 5 colors WITH ROUND PLASTIC QUEEN STAMP COLORS : WHITE (Year 2016-2021-2026) COLORS : YELLOW (Year 2017-2022-2027) COLORS : RED (Year 2018-2023-2028) COLORS : GREEN (Year 2019-2024-2029) COLORS : BLUE (Year 2020-2025-2030)
€7.80Price
SPRAY GLUE SPECIFICALLY FOR CATCHING CRAWLING AND FLYING INSECTS THAT INFEST VEGETABLE GARDEN, GARDEN AND INDOOR ENVIRONMENTS.THE NEW FORMULATION MAKES THE PRODUCT CONVENIENT TO USEACTS BY PHYSICAL ACTION ALONE DOES NOT DRY
€11.00Price
SPRAY GLUE SPECIFICALLY FOR CATCHING CRAWLING AND FLYING INSECTS THAT INFEST VEGETABLE GARDEN, GARDEN AND INDOOR ENVIRONMENTS.THE NEW FORMULATION MAKES THE PRODUCT CONVENIENT TO USEACTS BY PHYSICAL ACTION ALONE DOES NOT DRY
€11.00Price
€11.00Price
Transparent spray glue for catching flying and crawling insects - long-lasting, fast, non-drying500 ml spray can
€11.00Price
Transparent spray glue for catching flying and crawling insects - long-lasting, fast, non-drying500 ml spray can
Transparent spray glue for catching flying and crawling insects - long-lasting, fast, non-drying500 ml spray can
€11.00Price
WHEN TO USE Spring, summer and winter in the absence of brood (induced or natural) HOW TO USE Drip administration
€24.50Price
WHEN TO USE Spring, summer and winter in the absence of brood (induced or natural) HOW TO USE Drip administration
€24.50Price
€24.50Price
Oxalic acid and glycerol veterinary medicine for Beehives READY-TO-USE 500 ml bottle - dose for 10 hives AUTHORIZED PRODUCT for VETERINARY USE THIS PRODUCT CAN ONLY BE SOLD IN ITALY Technical data sheet see attached
€24.50Price
Oxalic acid and glycerol veterinary medicine for Beehives READY-TO-USE 500 ml bottle - dose for 10 hives AUTHORIZED PRODUCT for VETERINARY USE THIS PRODUCT CAN ONLY BE SOLD IN ITALY Technical data sheet see attached
Oxalic acid and glycerol veterinary medicine for Beehives READY-TO-USE 500 ml bottle - dose for 10 hives AUTHORIZED PRODUCT for VETERINARY USE THIS PRODUCT CAN ONLY BE SOLD IN ITALY Technical data sheet see attached
€24.50Price
€6.20Price
EXCLUDE-REGINE galvanized steel grid 32 x 49.5 cm for D.B. 7-frame Beehives
€6.20Price
EXCLUDE-REGINE galvanized steel grid 32 x 49.5 cm for D.B. 7-frame Beehives
EXCLUDE-REGINE galvanized steel grid 32 x 49.5 cm for D.B. 7-frame Beehives
€6.20Price
€94.00Price
Nucleus hive for queen bee fertilization D.B. 6 honeycombs divided in two lengthwise with POLYSTYRENE SIDES, paintedFor 2 fertilization coresThe core is divided into two compartments by galvanized sheet metal. Each compartment can hold No. 3 nest frames D.B. - Frames NOT includedWith 2 feeder covers (one for each compartment), movable bottom with hooks and electro-welded roofBeehive dimensions: 51.5 x 29.5 x h 45 cm - Weight 9 Kg(THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€94.00Price
Nucleus hive for queen bee fertilization D.B. 6 honeycombs divided in two lengthwise with POLYSTYRENE SIDES, paintedFor 2 fertilization coresThe core is divided into two compartments by galvanized sheet metal. Each compartment can hold No. 3 nest frames D.B. - Frames NOT includedWith 2 feeder covers (one for each compartment), movable bottom with hooks and electro-welded roofBeehive dimensions: 51.5 x 29.5 x h 45 cm - Weight 9 Kg(THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Nucleus hive for queen bee fertilization D.B. 6 honeycombs divided in two lengthwise with POLYSTYRENE SIDES, paintedFor 2 fertilization coresThe core is divided into two compartments by galvanized sheet metal. Each compartment can hold No. 3 nest frames D.B. - Frames NOT includedWith 2 feeder covers (one for each compartment), movable bottom with hooks and electro-welded roofBeehive dimensions: 51.5 x 29.5 x h 45 cm - Weight 9 Kg(THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€94.00Price
€0.85Price
Total length: cm 11 Handle length: cm 8 SEE QUANTITY DISCOUNT
€0.85Price
Total length: cm 11 Handle length: cm 8 SEE QUANTITY DISCOUNT
Total length: cm 11 Handle length: cm 8 SEE QUANTITY DISCOUNT
€0.85Price
€46.00Price
Stainless steel diaphragm for Dadant Beehives B.on which bees deposit propolisComplete with wooden frame and protective netD.B. frame size: 47 x 30 cm
€46.00Price
Stainless steel diaphragm for Dadant Beehives B.on which bees deposit propolisComplete with wooden frame and protective netD.B. frame size: 47 x 30 cm
Stainless steel diaphragm for Dadant Beehives B.on which bees deposit propolisComplete with wooden frame and protective netD.B. frame size: 47 x 30 cm
€46.00Price
€11.50Price
PLEATED PAPER FILTER DIAM. 50 cm - 10 pieces for filtering propolis solution
€11.50Price
PLEATED PAPER FILTER DIAM. 50 cm - 10 pieces for filtering propolis solution
PLEATED PAPER FILTER DIAM. 50 cm - 10 pieces for filtering propolis solution
€11.50Price
€6.00Price
1/2" NYLON CENTRAL BUSH FOR FULL ALLOY EXTRACTORSØ INSIDE BUSH 14mmØ EXTRACTOR PITCH HOLE 21mm
€6.00Price
1/2" NYLON CENTRAL BUSH FOR FULL ALLOY EXTRACTORSØ INSIDE BUSH 14mmØ EXTRACTOR PITCH HOLE 21mm
1/2" NYLON CENTRAL BUSH FOR FULL ALLOY EXTRACTORSØ INSIDE BUSH 14mmØ EXTRACTOR PITCH HOLE 21mm
€6.00Price
€3,680.00Price
Fixed speed screw pump - Trolley with wheels - Three-phase power supply (single-phase on request) .50 mm/2" connection
€3,680.00Price
Fixed speed screw pump - Trolley with wheels - Three-phase power supply (single-phase on request) .50 mm/2" connection
Fixed speed screw pump - Trolley with wheels - Three-phase power supply (single-phase on request) .50 mm/2" connection
€3,680.00Price
€32.00Price
STAINLESS STEEL SUPPORT for 50 kg removable ripener(supplied disassembled with bolts and nuts for mounting)
€32.00Price
STAINLESS STEEL SUPPORT for 50 kg removable ripener(supplied disassembled with bolts and nuts for mounting)
STAINLESS STEEL SUPPORT for 50 kg removable ripener(supplied disassembled with bolts and nuts for mounting)
€32.00Price
€0.65Price
Galvanized GIRL for attaching transport templates or wooden doors for Beehives - threaded screw diameter 4 x 21 mm
€0.65Price
Galvanized GIRL for attaching transport templates or wooden doors for Beehives - threaded screw diameter 4 x 21 mm
Galvanized GIRL for attaching transport templates or wooden doors for Beehives - threaded screw diameter 4 x 21 mm
€0.65Price
Beehives D.B. 12 honeycomb painted only cuno nest with movable antivarroa net bottom . Nest; honeycomb cover with mounted 4-position disc; 10cm-high galvanized sheet metal cover lined with wood and faestile on the bottom; metal door; 3 connection angles; spacers mounted in the nest mobile anti-varroa mesh bottom with galvanized sheet metal tray removable from the back; 25mm-thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest; spring hook with screws for fixing mobile bottom
€96.00Price
Beehives D.B. 12 honeycomb painted only cuno nest with movable antivarroa net bottom . Nest; honeycomb cover with mounted 4-position disc; 10cm-high galvanized sheet metal cover lined with wood and faestile on the bottom; metal door; 3 connection angles; spacers mounted in the nest mobile anti-varroa mesh bottom with galvanized sheet metal tray removable from the back; 25mm-thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest; spring hook with screws for fixing mobile bottom
€96.00Price
€96.00Price
Beehives Dadant Blatt 12-frame cube Beehive with movable anti-varroa mesh bottom. Nest only (Frames not included) (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€96.00Price
Beehives Dadant Blatt 12-frame cube Beehive with movable anti-varroa mesh bottom. Nest only (Frames not included) (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehives Dadant Blatt 12-frame cube Beehive with movable anti-varroa mesh bottom. Nest only (Frames not included) (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€96.00Price
€5.50Price
POLLEN COLLECTION GRID with perforated band + 60° folded support (for building pollen trap) Grid size: 7.7 x 36.5 cm
€5.50Price
POLLEN COLLECTION GRID with perforated band + 60° folded support (for building pollen trap) Grid size: 7.7 x 36.5 cm
POLLEN COLLECTION GRID with perforated band + 60° folded support (for building pollen trap) Grid size: 7.7 x 36.5 cm
€5.50Price
€22.90Price
REDUCER TRAY for "Ferret" vaporizer Reduces the amount of liquid in the tray.
€22.90Price
REDUCER TRAY for "Ferret" vaporizer Reduces the amount of liquid in the tray.
REDUCER TRAY for "Ferret" vaporizer Reduces the amount of liquid in the tray.
€22.90Price
Candied paste - Complementary feed for bees Sugar composition : Fructose 42% Dextrose 51.5% Maltose 2.5% Triose 2% Sucrose 2%
€2.20Price
Candied paste - Complementary feed for bees Sugar composition : Fructose 42% Dextrose 51.5% Maltose 2.5% Triose 2% Sucrose 2%
€2.20Price
€10.00Price
Isolator for COVEN BLOCK Made of steel with queen excluder grid for insertion at side wall of Beehive Dim. : Length 44.6 x Width 4.5 x Height 30.5 cm
€10.00Price
Isolator for COVEN BLOCK Made of steel with queen excluder grid for insertion at side wall of Beehive Dim. : Length 44.6 x Width 4.5 x Height 30.5 cm
Isolator for COVEN BLOCK Made of steel with queen excluder grid for insertion at side wall of Beehive Dim. : Length 44.6 x Width 4.5 x Height 30.5 cm
€10.00Price
€80.00Price
KIT no.3 additional stainless steel cages for Extractors Additional stainless steel cages for extractors (for extractors - QI S05M - QI S06B - QI S05 and QI S06 ) For radial extractors Diameter 525 and 620 mm
€80.00Price
KIT no.3 additional stainless steel cages for Extractors Additional stainless steel cages for extractors (for extractors - QI S05M - QI S06B - QI S05 and QI S06 ) For radial extractors Diameter 525 and 620 mm
KIT no.3 additional stainless steel cages for Extractors Additional stainless steel cages for extractors (for extractors - QI S05M - QI S06B - QI S05 and QI S06 ) For radial extractors Diameter 525 and 620 mm
€80.00Price
€142.00Price
STAINLESS STEEL DOUBLE FILTER for 200 and 400 kg ripening tanks - with filter, pre-filter, and nylon bag (code LA 6272/ES)
For 200 kg ripening tanks: diameter: 47 cm
For 400 kg ripening tanks: diameter: 62 cm
Small double filter for 200-400 kg ripening tanks, consisting of 3 parts: stainless steel coarse filter, 275-micron nylon finishing bag, and ø 470 mm supporting structure with feet for mounting on ripening tanks up to ø 620 mm.
€142.00Price
STAINLESS STEEL DOUBLE FILTER for 200 and 400 kg ripening tanks - with filter, pre-filter, and nylon bag (code LA 6272/ES)
For 200 kg ripening tanks: diameter: 47 cm
For 400 kg ripening tanks: diameter: 62 cm
Small double filter for 200-400 kg ripening tanks, consisting of 3 parts: stainless steel coarse filter, 275-micron nylon finishing bag, and ø 470 mm supporting structure with feet for mounting on ripening tanks up to ø 620 mm.
STAINLESS STEEL DOUBLE FILTER for 200 and 400 kg ripening tanks - with filter, pre-filter, and nylon bag (code LA 6272/ES)
For 200 kg ripening tanks: diameter: 47 cm
For 400 kg ripening tanks: diameter: 62 cm
Small double filter for 200-400 kg ripening tanks, consisting of 3 parts: stainless steel coarse filter, 275-micron nylon finishing bag, and ø 470 mm supporting structure with feet for mounting on ripening tanks up to ø 620 mm.
€142.00Price
€295.00Price
STAINLESS STEEL MATURATOR for honey capacity 400 kg with TIG welding - Diameter 62 cm - Height 102 cmWith threaded ring nut for screw tap attachment - Stainless steel lidScrew cut tap diameter 40 mm with choice of:- Plastic/Nylon tap (QI R05)- Chrome steel tap (QI R03)- Stainless steel tap (LA 6370)
€295.00Price
STAINLESS STEEL MATURATOR for honey capacity 400 kg with TIG welding - Diameter 62 cm - Height 102 cmWith threaded ring nut for screw tap attachment - Stainless steel lidScrew cut tap diameter 40 mm with choice of:- Plastic/Nylon tap (QI R05)- Chrome steel tap (QI R03)- Stainless steel tap (LA 6370)
STAINLESS STEEL MATURATOR for honey capacity 400 kg with TIG welding - Diameter 62 cm - Height 102 cmWith threaded ring nut for screw tap attachment - Stainless steel lidScrew cut tap diameter 40 mm with choice of:- Plastic/Nylon tap (QI R05)- Chrome steel tap (QI R03)- Stainless steel tap (LA 6370)
€295.00Price
€0.30Price
Capless Cell Protector - NICOT - EDTo be applied to larva holder (HY G-0009)
€0.30Price
Capless Cell Protector - NICOT - EDTo be applied to larva holder (HY G-0009)
Capless Cell Protector - NICOT - EDTo be applied to larva holder (HY G-0009)
€0.30Price
€1,130.00Price
RADIAL Extractor D.B. MOTOR - with digital speed controller - 230V/100W -rotation in the 2 directions - NYLON basket (QI Code C46) - Ø 620 mm -For 18 Honey super combs or (3 from nest with additional cages) -Nylon cutter diam. 40 mm For nest combs, No. 3 additional stainless steel cages not included (QI Code G06) are required.
€1,130.00Price
RADIAL Extractor D.B. MOTOR - with digital speed controller - 230V/100W -rotation in the 2 directions - NYLON basket (QI Code C46) - Ø 620 mm -For 18 Honey super combs or (3 from nest with additional cages) -Nylon cutter diam. 40 mm For nest combs, No. 3 additional stainless steel cages not included (QI Code G06) are required.
RADIAL Extractor D.B. MOTOR - with digital speed controller - 230V/100W -rotation in the 2 directions - NYLON basket (QI Code C46) - Ø 620 mm -For 18 Honey super combs or (3 from nest with additional cages) -Nylon cutter diam. 40 mm For nest combs, No. 3 additional stainless steel cages not included (QI Code G06) are required.
€1,130.00Price
€0.48Price
Spray for glass bottle up to 30 ml - with key cover - Mouth PFP 18 - Straw length 4 cm Bag of 100 pieces packaging
€0.48Price
Spray for glass bottle up to 30 ml - with key cover - Mouth PFP 18 - Straw length 4 cm Bag of 100 pieces packaging
Spray for glass bottle up to 30 ml - with key cover - Mouth PFP 18 - Straw length 4 cm Bag of 100 pieces packaging
€0.48Price
€12.00Price
Flexible silicone soap moldWeight: 0.04 kg - Measures: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
Flexible silicone soap moldWeight: 0.04 kg - Measures: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap moldWeight: 0.04 kg - Measures: 8.7 cm x 8 cm x 2.5 cmThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€12.00Price
€66.00Price
Double Replacement Glass for 70 x 70 cm Solar Scarers - Glass is available without the support frame Galvanized
Modello zincato (Cod. QI S04)
Modello INOX (Cod. QI S04I)
€66.00Price
Double Replacement Glass for 70 x 70 cm Solar Scarers - Glass is available without the support frame Galvanized
Modello zincato (Cod. QI S04)
Modello INOX (Cod. QI S04I)
Double Replacement Glass for 70 x 70 cm Solar Scarers - Glass is available without the support frame Galvanized
Modello zincato (Cod. QI S04)
Modello INOX (Cod. QI S04I)
€66.00Price
Royal Jelly ASPIRATOR with membrane pump- continuous use Stainless steel storage case, polycarbonate handle, stainless steel locking hook and tool compartment. Lighted star /stop switch. Food grade silicone tubing and food grade rubber exchange cap. Glass jar. Motor with MEMBRANE pump for CONTINUOUS USE. Dimensions: 32 x 23 x 17 cm. Case: blue-colored shockproof material exterior, stainless steel inner part Suction power: 40 liters/hour Parts supplied Transparent hose Suction nozzle Browned bottle 150 ml. Sealing cap Description of the operating principle of the vacuum cleaner -Case with opening from the top -Browned glass bottle -Hermetic plug -Rubber plug complete with fitting and connecting hoses Once the machine is prepared to be operational (as stated in the section "Safety and Installation Prescription"), the machine is energized. This allows the motor, which acts as a vacuum pump by means of the jarbrunate, to start operating. Suction is by means of the small plastic tube located at the end of the plug. Safety and installation prescriptions 1)Connect the plug to the mains (220V); or Suttorgel Field (12V); 2)Set the switch to zero (off); 3)Connect the quick connection of the chosen cap to the device by short rotation; 4)Apply the chosen stopper to the flask making sure, by gentle rotary pressure, that a perfect seal is ensured; 5)Turn on the switch and proceed to aspiration; 6)When you have finished aspiration, remove the rubber stopper and hermetically seal the flask by immediately placing it in the refrigerator. Please note that royal jelly can be stored long intact away from light tightly closed and at a temperature of 12°C. Possible inconveniences and their solutions 1)THE APPLIANCE DOES NOT START: check that the terminals are plugged into the power supply (12V battery or electric current) 2)THE APPLIANCE STARTS BUT DOES NOT SUCK: check that the level of royal jelly in the jar has not risen and overflowed into the suction tube. If so, disassemble the aspirator and clean the tubing up to the vacuum pump. For other eventualities, contact the manufacturer or retailer. instructions in pdf
€360.00Price
Royal Jelly ASPIRATOR with membrane pump- continuous use Stainless steel storage case, polycarbonate handle, stainless steel locking hook and tool compartment. Lighted star /stop switch. Food grade silicone tubing and food grade rubber exchange cap. Glass jar. Motor with MEMBRANE pump for CONTINUOUS USE. Dimensions: 32 x 23 x 17 cm. Case: blue-colored shockproof material exterior, stainless steel inner part Suction power: 40 liters/hour Parts supplied Transparent hose Suction nozzle Browned bottle 150 ml. Sealing cap Description of the operating principle of the vacuum cleaner -Case with opening from the top -Browned glass bottle -Hermetic plug -Rubber plug complete with fitting and connecting hoses Once the machine is prepared to be operational (as stated in the section "Safety and Installation Prescription"), the machine is energized. This allows the motor, which acts as a vacuum pump by means of the jarbrunate, to start operating. Suction is by means of the small plastic tube located at the end of the plug. Safety and installation prescriptions 1)Connect the plug to the mains (220V); or Suttorgel Field (12V); 2)Set the switch to zero (off); 3)Connect the quick connection of the chosen cap to the device by short rotation; 4)Apply the chosen stopper to the flask making sure, by gentle rotary pressure, that a perfect seal is ensured; 5)Turn on the switch and proceed to aspiration; 6)When you have finished aspiration, remove the rubber stopper and hermetically seal the flask by immediately placing it in the refrigerator. Please note that royal jelly can be stored long intact away from light tightly closed and at a temperature of 12°C. Possible inconveniences and their solutions 1)THE APPLIANCE DOES NOT START: check that the terminals are plugged into the power supply (12V battery or electric current) 2)THE APPLIANCE STARTS BUT DOES NOT SUCK: check that the level of royal jelly in the jar has not risen and overflowed into the suction tube. If so, disassemble the aspirator and clean the tubing up to the vacuum pump. For other eventualities, contact the manufacturer or retailer. instructions in pdf
€360.00Price
€360.00Price
PNEUMATIC ASPIRATOR " Suttorgel" to suck up royal jelly from the domes using the depression techniquePower supply 220V-50 Hz Optionally to power the "Suttorgel" from 12V= with cigarette lighter car batteries INVERTER (art. HY S0022)converts 12V= to 220V/50Hz
€360.00Price
PNEUMATIC ASPIRATOR " Suttorgel" to suck up royal jelly from the domes using the depression techniquePower supply 220V-50 Hz Optionally to power the "Suttorgel" from 12V= with cigarette lighter car batteries INVERTER (art. HY S0022)converts 12V= to 220V/50Hz
PNEUMATIC ASPIRATOR " Suttorgel" to suck up royal jelly from the domes using the depression techniquePower supply 220V-50 Hz Optionally to power the "Suttorgel" from 12V= with cigarette lighter car batteries INVERTER (art. HY S0022)converts 12V= to 220V/50Hz
€360.00Price
€14.90Price
POLLY COLLECTOR TRAP made of plastic for standard beehives with porch and mesh bottom It is introduced directly to the Beehives entrance and the pollen is collected at the bottom of the tray
€14.90Price
POLLY COLLECTOR TRAP made of plastic for standard beehives with porch and mesh bottom It is introduced directly to the Beehives entrance and the pollen is collected at the bottom of the tray
POLLY COLLECTOR TRAP made of plastic for standard beehives with porch and mesh bottom It is introduced directly to the Beehives entrance and the pollen is collected at the bottom of the tray
€14.90Price
Use The fondimiele is started by the thermostat on the box, the indicator light inicates when the machine is running and lights up when it reaches the set temperature. Turning the knob clockwise causes a click that starts the fondimiele by setting the temperature to a maximum of 45°C. To have an even liquefaction of honey, it is recommended to move the honey fondimiele from bottom to top taking care not to force it because liquefied honey can damage the heating element. IMPORTANT do not turn on the fondimiele if the probe is not in contact with the honey (the bronze ferrule must be in contact with the honey)
€595.00Price
Use The fondimiele is started by the thermostat on the box, the indicator light inicates when the machine is running and lights up when it reaches the set temperature. Turning the knob clockwise causes a click that starts the fondimiele by setting the temperature to a maximum of 45°C. To have an even liquefaction of honey, it is recommended to move the honey fondimiele from bottom to top taking care not to force it because liquefied honey can damage the heating element. IMPORTANT do not turn on the fondimiele if the probe is not in contact with the honey (the bronze ferrule must be in contact with the honey)
€595.00Price
€595.00Price
ELECTRIC ELECTRIC immersion stainless steel melting pot Ø cm 70 with thermostat 220 V - 1500 W - 50/60 Hz Description of outer body: stainless steel handle, stem and heating element
€595.00Price
ELECTRIC ELECTRIC immersion stainless steel melting pot Ø cm 70 with thermostat 220 V - 1500 W - 50/60 Hz Description of outer body: stainless steel handle, stem and heating element
ELECTRIC ELECTRIC immersion stainless steel melting pot Ø cm 70 with thermostat 220 V - 1500 W - 50/60 Hz Description of outer body: stainless steel handle, stem and heating element
€595.00Price
€82.00Price
INOX full-diameter mesh FILTER for 400 kg ripeners - diameter 62.5 cm
€82.00Price
INOX full-diameter mesh FILTER for 400 kg ripeners - diameter 62.5 cm
INOX full-diameter mesh FILTER for 400 kg ripeners - diameter 62.5 cm
€82.00Price
€42.00Price
HONEY CUT RUBBET stainless steel Ø 40 mm - 1" 1/2 Screws and springs are made of stainless steel and gaskets of food-grade silicone
Made in Italy
€42.00Price
HONEY CUT RUBBET stainless steel Ø 40 mm - 1" 1/2 Screws and springs are made of stainless steel and gaskets of food-grade silicone
Made in Italy
HONEY CUT RUBBET stainless steel Ø 40 mm - 1" 1/2 Screws and springs are made of stainless steel and gaskets of food-grade silicone
Made in Italy
€42.00Price
€22.00Price
Replacement polycarbonate lid for Extractor diameter 370 mm OPTIONS: - COUPLE - HALF COVER
€22.00Price
Replacement polycarbonate lid for Extractor diameter 370 mm OPTIONS: - COUPLE - HALF COVER
Replacement polycarbonate lid for Extractor diameter 370 mm OPTIONS: - COUPLE - HALF COVER
€22.00Price
OPERATING PRESS WITH OPENABLE STAINLESS STEEL CARRIAGE CAGE -Diameter 70 cm - Power supply. (400V-3F-50Hz) UPON REQUEST ADDITIONAL CAGE and DOUBLE TROLLEY THE OPERATING PRESS IS SUPPLIED WITH AISI 304 STAINLESS STEEL STRUCTURE- HEIGHT OF THE BASKET PLATE WITH HEIGHT DIFFERENT FROM THE STANDARD (PRICE TO BE DEFINED)
OPERATING PRESS WITH OPENABLE STAINLESS STEEL CARRIAGE CAGE -Diameter 70 cm - Power supply. (400V-3F-50Hz) UPON REQUEST ADDITIONAL CAGE and DOUBLE TROLLEY THE OPERATING PRESS IS SUPPLIED WITH AISI 304 STAINLESS STEEL STRUCTURE- HEIGHT OF THE BASKET PLATE WITH HEIGHT DIFFERENT FROM THE STANDARD (PRICE TO BE DEFINED)
OPERATING PRESS WITH OPENABLE STAINLESS STEEL CARRIAGE CAGE -Diameter 70 cm - Power supply. (400V-3F-50Hz) UPON REQUEST ADDITIONAL CAGE and DOUBLE TROLLEY THE OPERATING PRESS IS SUPPLIED WITH AISI 304 STAINLESS STEEL STRUCTURE- HEIGHT OF THE BASKET PLATE WITH HEIGHT DIFFERENT FROM THE STANDARD (PRICE TO BE DEFINED)
28 cm stainless steel serrated blade uncapping knife with wooden handle
€26.00Price
28 cm stainless steel serrated blade uncapping knife with wooden handle
€26.00Price
€26.00Price
28 cm stainless steel serrated blade uncapping knife with wooden handle
€26.00Price
28 cm stainless steel serrated blade uncapping knife with wooden handle
28 cm stainless steel serrated blade uncapping knife with wooden handle
€26.00Price
Stainless steel basin Decanting filter Stainless steel perforated plate operculum Nylon tap (QI Code R11) Ø 40 mm Stainless steel lectern (QI Code L11) Stainless steel legs Stainless steel lid Stainless steel bench height for uncapping 80 cm
€390.00Price
Stainless steel basin Decanting filter Stainless steel perforated plate operculum Nylon tap (QI Code R11) Ø 40 mm Stainless steel lectern (QI Code L11) Stainless steel legs Stainless steel lid Stainless steel bench height for uncapping 80 cm
€390.00Price
€390.00Price
D.B. stainless steel uncapping bench with 56x51x42 cm tank with: - No. 1 stainless steel lectern (code QI L11) - Stainless steel tub with reinforcing ribs - Stainless steel operculum decanting filter - Nylon tap (code QI R11) diameter 40 mm - Stainless steel lid - Height bench for uncapping 80 cm
€390.00Price
D.B. stainless steel uncapping bench with 56x51x42 cm tank with: - No. 1 stainless steel lectern (code QI L11) - Stainless steel tub with reinforcing ribs - Stainless steel operculum decanting filter - Nylon tap (code QI R11) diameter 40 mm - Stainless steel lid - Height bench for uncapping 80 cm
D.B. stainless steel uncapping bench with 56x51x42 cm tank with: - No. 1 stainless steel lectern (code QI L11) - Stainless steel tub with reinforcing ribs - Stainless steel operculum decanting filter - Nylon tap (code QI R11) diameter 40 mm - Stainless steel lid - Height bench for uncapping 80 cm
€390.00Price
€618.00Price
ELECTRIC desk-top INSERIFYER-with settable timer for welding time indicator light:line-start and end of welding iclo-bronze tips adjustable in width 230 volts 50 hz
€618.00Price
ELECTRIC desk-top INSERIFYER-with settable timer for welding time indicator light:line-start and end of welding iclo-bronze tips adjustable in width 230 volts 50 hz
ELECTRIC desk-top INSERIFYER-with settable timer for welding time indicator light:line-start and end of welding iclo-bronze tips adjustable in width 230 volts 50 hz
€618.00Price
Beehives D.B. 10 honeycomb painted only cuno nest with movable antivarroa net bottom . Nest; honeycomb cover with mounted 4-position disc; 10-cm-high galvanized sheet metal cover lined with wood and faestile on bottom; metal door; 3 connection angles; spacers mounted in nest movable anti-varroa mesh bottom with galvanized sheet metal tray removable from back; 25-mm-thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest; spring hook with screws for fixing movable bottom
€90.00Price
Beehives D.B. 10 honeycomb painted only cuno nest with movable antivarroa net bottom . Nest; honeycomb cover with mounted 4-position disc; 10-cm-high galvanized sheet metal cover lined with wood and faestile on bottom; metal door; 3 connection angles; spacers mounted in nest movable anti-varroa mesh bottom with galvanized sheet metal tray removable from back; 25-mm-thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest; spring hook with screws for fixing movable bottom
€90.00Price
€90.00Price
Beehive Dadant Blatt 10-frame cube with movable anti-varroa mesh bottom.
Nest only (Frames not included) - Water-painted
(THE COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€90.00Price
Beehive Dadant Blatt 10-frame cube with movable anti-varroa mesh bottom.
Nest only (Frames not included) - Water-painted
(THE COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehive Dadant Blatt 10-frame cube with movable anti-varroa mesh bottom.
Nest only (Frames not included) - Water-painted
(THE COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€90.00Price
€62.00Price
SIZES AVAILABLE: L, XL, XXL
Square veil in painted galvanized mesh, jacket in cotton canvas
Zipper to turn mask upside down
Front tool pocket, with Velcro closure
Elastic at wrists and waist
€62.00Price
SIZES AVAILABLE: L, XL, XXL
Square veil in painted galvanized mesh, jacket in cotton canvas
Zipper to turn mask upside down
Front tool pocket, with Velcro closure
Elastic at wrists and waist
SIZES AVAILABLE: L, XL, XXL
Square veil in painted galvanized mesh, jacket in cotton canvas
Zipper to turn mask upside down
Front tool pocket, with Velcro closure
Elastic at wrists and waist
€62.00Price
Silicone rubber mantle (also available as spare part cod QI M34) ,reinforced with ribs and adaptable to any type of smoker.
Removable anti-scald protection netNylon cheeks, fiberglass-filled, heat-resistantSilicone suction valveRear cheek, prepared with preholes for screwing the body to the smoker - adaptable on any model -
€34.00Price
Silicone rubber mantle (also available as spare part cod QI M34) ,reinforced with ribs and adaptable to any type of smoker.
Removable anti-scald protection netNylon cheeks, fiberglass-filled, heat-resistantSilicone suction valveRear cheek, prepared with preholes for screwing the body to the smoker - adaptable on any model -
€34.00Price
€34.00Price
10cm diameter smoker with 18cm high spout made of stainless steel, with anti-scald protection (Ref. FO 2902) and silicone rubber bellows (Ref. QI M34)
Replacement smoker (Ref. QI C138)
€34.00Price
10cm diameter smoker with 18cm high spout made of stainless steel, with anti-scald protection (Ref. FO 2902) and silicone rubber bellows (Ref. QI M34)
Replacement smoker (Ref. QI C138)
10cm diameter smoker with 18cm high spout made of stainless steel, with anti-scald protection (Ref. FO 2902) and silicone rubber bellows (Ref. QI M34)
Replacement smoker (Ref. QI C138)
€34.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional
1) Preparing the mold: We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge.
2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used.
3) Take the candle out of the mold: When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€28.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional
1) Preparing the mold: We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge.
2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used.
3) Take the candle out of the mold: When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€28.00Price
€28.00Price
Mold dimensions:
Height: 110 mm
Diameter: 53 mm
Weight: 0.22 kg
Candle dimensions:
Height: 110 mm
Diameter: 35 mm
Weight of wax: 60 g
Wick: 3x10
Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base.
They are not suitable for food production.
€28.00Price
Mold dimensions:
Height: 110 mm
Diameter: 53 mm
Weight: 0.22 kg
Candle dimensions:
Height: 110 mm
Diameter: 35 mm
Weight of wax: 60 g
Wick: 3x10
Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base.
They are not suitable for food production.
Mold dimensions:
Height: 110 mm
Diameter: 53 mm
Weight: 0.22 kg
Candle dimensions:
Height: 110 mm
Diameter: 35 mm
Weight of wax: 60 g
Wick: 3x10
Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base.
They are not suitable for food production.
€28.00Price
Bottom with inclinations such that the liquid feed flows to the trough as much as possible. The "DUAL" feeder comes complete with volcanello Art. C107 and semi-transparent plastic cover bells Art.C97. For solid feed (candy paste), it is used without volcanello and bell. by directly laying the bag of candy paste (better to use candisacc Art . C108. The bees pass through the side slits feeding without finding any obstacles due to the lowering of the bag, or in case, you use loose candy, you place it inside the feeder even with the volcanel inserted and without bell.To close the feeder, you reuse the polystyrene lid of the Beehive.
€9.50Price
Bottom with inclinations such that the liquid feed flows to the trough as much as possible. The "DUAL" feeder comes complete with volcanello Art. C107 and semi-transparent plastic cover bells Art.C97. For solid feed (candy paste), it is used without volcanello and bell. by directly laying the bag of candy paste (better to use candisacc Art . C108. The bees pass through the side slits feeding without finding any obstacles due to the lowering of the bag, or in case, you use loose candy, you place it inside the feeder even with the volcanel inserted and without bell.To close the feeder, you reuse the polystyrene lid of the Beehive.
€9.50Price
€9.50Price
Polystyrene cover feeder divided in two for 6-frame D.B. Beehives (Cod. QI A41 - QI A89- QI A103 - QI A77- QI A105 - QI A97 Langstroth)Complete with double transparent plastic cover bell - Replacement bell (Cod. QI C97)Double volcano (Cod. QI C107)Capacity 3 LitersDimensions 275 x 495 x 70 H mmA new shape makes it unique and practical for feeding candy in pouches or not, or liquid food.
€9.50Price
Polystyrene cover feeder divided in two for 6-frame D.B. Beehives (Cod. QI A41 - QI A89- QI A103 - QI A77- QI A105 - QI A97 Langstroth)Complete with double transparent plastic cover bell - Replacement bell (Cod. QI C97)Double volcano (Cod. QI C107)Capacity 3 LitersDimensions 275 x 495 x 70 H mmA new shape makes it unique and practical for feeding candy in pouches or not, or liquid food.
Polystyrene cover feeder divided in two for 6-frame D.B. Beehives (Cod. QI A41 - QI A89- QI A103 - QI A77- QI A105 - QI A97 Langstroth)Complete with double transparent plastic cover bell - Replacement bell (Cod. QI C97)Double volcano (Cod. QI C107)Capacity 3 LitersDimensions 275 x 495 x 70 H mmA new shape makes it unique and practical for feeding candy in pouches or not, or liquid food.
€9.50Price
€17.00Price
Flexible silicone soap mold - Weight: 0.04 kgThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€17.00Price
Flexible silicone soap mold - Weight: 0.04 kgThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
Flexible silicone soap mold - Weight: 0.04 kgThey can be reused and are dishwasher safe. They are also suitable for candle making. They can come in contact with various materials including : Beeswax , Ceramic plaster , Epoxy resin , Soy wax , Soap base , Creative cement , Paraffin , Palm wax.
€17.00Price
€13.00Price
BALL RUBBER with 3/4" spout for OIL and WINE with BECCUCCIO
Made in Italy
€13.00Price
BALL RUBBER with 3/4" spout for OIL and WINE with BECCUCCIO
Made in Italy
BALL RUBBER with 3/4" spout for OIL and WINE with BECCUCCIO
Made in Italy
€13.00Price
Painted 10-frame Beehives D.B. Cube, with honeycomb and 10 frames in the nest and 9 in the honeycomb. Complete with: Nest; Honey super; wooden honeycomb cover with 4-position sheet metal disc mounted; 10cm high galvanized sheet metal cover lined with wood and faestile on bottom; frames in nest and Honey super with wax-free wire; metal hatchery door; 3 corner conn; spacers mounted in the nest and honeycomb; mobile anti-varroa net bottom with galvanized sheet metal tray removable from the back; 25mm thick seasoned spruce wood; walls assembled with screws; handles for transport; Frame rest; screws and spring hook for fixing the bottom
€142.00Price
Painted 10-frame Beehives D.B. Cube, with honeycomb and 10 frames in the nest and 9 in the honeycomb. Complete with: Nest; Honey super; wooden honeycomb cover with 4-position sheet metal disc mounted; 10cm high galvanized sheet metal cover lined with wood and faestile on bottom; frames in nest and Honey super with wax-free wire; metal hatchery door; 3 corner conn; spacers mounted in the nest and honeycomb; mobile anti-varroa net bottom with galvanized sheet metal tray removable from the back; 25mm thick seasoned spruce wood; walls assembled with screws; handles for transport; Frame rest; screws and spring hook for fixing the bottom
€142.00Price
€142.00Price
Beehives Dadant Blatt 10-frame Beehive Cube with movable anti-varroa net bottom. Nest + Honey super + 10 nest frames mounted, pierced and strung + 9 honeycomb frames mounted, pierced and strung (no wax sheets) Paint + Paraffin coating (FOOD PARAFFIN) Paraffin coating is done in a hot bath with immersion, the whole Beehive is paraffined inside and out, to ensure the durability of the Beehive (COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€142.00Price
Beehives Dadant Blatt 10-frame Beehive Cube with movable anti-varroa net bottom. Nest + Honey super + 10 nest frames mounted, pierced and strung + 9 honeycomb frames mounted, pierced and strung (no wax sheets) Paint + Paraffin coating (FOOD PARAFFIN) Paraffin coating is done in a hot bath with immersion, the whole Beehive is paraffined inside and out, to ensure the durability of the Beehive (COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehives Dadant Blatt 10-frame Beehive Cube with movable anti-varroa net bottom. Nest + Honey super + 10 nest frames mounted, pierced and strung + 9 honeycomb frames mounted, pierced and strung (no wax sheets) Paint + Paraffin coating (FOOD PARAFFIN) Paraffin coating is done in a hot bath with immersion, the whole Beehive is paraffined inside and out, to ensure the durability of the Beehive (COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€142.00Price
€8.50Price
Brass metal eyelets ø 3 mm to reinforce frame holes and facilitate threading. Pack of 1000 pieces approx.
€8.50Price
Brass metal eyelets ø 3 mm to reinforce frame holes and facilitate threading. Pack of 1000 pieces approx.
Brass metal eyelets ø 3 mm to reinforce frame holes and facilitate threading. Pack of 1000 pieces approx.
€8.50Price
€0.65Price
70 mm diameter aluminum cap for CRISTAL PET jars
€0.65Price
70 mm diameter aluminum cap for CRISTAL PET jars
70 mm diameter aluminum cap for CRISTAL PET jars
€0.65Price
€102.00Price
Beehive fertilization queens made of warm-frame wood (2.5 cm thick) with two compartments. With 2 front and back entrances, divided by removable sheet metal separator, each compartment is equipped with 6 frames 1/2 nest D.B. interlocking, complete with feeder honeycomb cover with isolator panel, antivarroa bottom with removable bottom sheet, Single wooden roof covered with sheet metal.The central sheet metal separator when removed, transforms the Beehive into a normal D. Beehives.B. with 6 nest frames, composing two 1/2 nest frames- Wooden side walls- Movable bottom with hooksDIMS: W. 28.5 - L. 50 cm To be completed with 12 interlocking half-nest frames (code PI 45/FE) - Frames NOT INCLUDEDPTIONS: - Wooden side walls - Polystyrene side walls (to be pre-ordered)
€102.00Price
Beehive fertilization queens made of warm-frame wood (2.5 cm thick) with two compartments. With 2 front and back entrances, divided by removable sheet metal separator, each compartment is equipped with 6 frames 1/2 nest D.B. interlocking, complete with feeder honeycomb cover with isolator panel, antivarroa bottom with removable bottom sheet, Single wooden roof covered with sheet metal.The central sheet metal separator when removed, transforms the Beehive into a normal D. Beehives.B. with 6 nest frames, composing two 1/2 nest frames- Wooden side walls- Movable bottom with hooksDIMS: W. 28.5 - L. 50 cm To be completed with 12 interlocking half-nest frames (code PI 45/FE) - Frames NOT INCLUDEDPTIONS: - Wooden side walls - Polystyrene side walls (to be pre-ordered)
Beehive fertilization queens made of warm-frame wood (2.5 cm thick) with two compartments. With 2 front and back entrances, divided by removable sheet metal separator, each compartment is equipped with 6 frames 1/2 nest D.B. interlocking, complete with feeder honeycomb cover with isolator panel, antivarroa bottom with removable bottom sheet, Single wooden roof covered with sheet metal.The central sheet metal separator when removed, transforms the Beehive into a normal D. Beehives.B. with 6 nest frames, composing two 1/2 nest frames- Wooden side walls- Movable bottom with hooksDIMS: W. 28.5 - L. 50 cm To be completed with 12 interlocking half-nest frames (code PI 45/FE) - Frames NOT INCLUDEDPTIONS: - Wooden side walls - Polystyrene side walls (to be pre-ordered)
€102.00Price
28 cm serrated blade uncapping knife with plastic handle
€14.00Price
28 cm serrated blade uncapping knife with plastic handle
€14.00Price
€14.00Price
28 cm serrated blade uncapping knife with plastic handle
€14.00Price
28 cm serrated blade uncapping knife with plastic handle
28 cm serrated blade uncapping knife with plastic handle
€14.00Price
WOOD COVER D.B. Beehives 8-frame honeycombs with 6-cm sides and 4-position disc mounted
€14.50Price
WOOD COVER D.B. Beehives 8-frame honeycombs with 6-cm sides and 4-position disc mounted
€14.50Price
€14.50Price
WOODEN COVER D.B. 8-frame Beehives with 6-cm sides and with 4-position disk mounted Size: 350 x 500 mm
€14.50Price
WOODEN COVER D.B. 8-frame Beehives with 6-cm sides and with 4-position disk mounted Size: 350 x 500 mm
WOODEN COVER D.B. 8-frame Beehives with 6-cm sides and with 4-position disk mounted Size: 350 x 500 mm
€14.50Price
€14.50Price
WOODEN COVER D.B. 7-frame Beehives with 6-cm sides and with 4-position disc mounted DIM: 310 x 500 mm
€14.50Price
WOODEN COVER D.B. 7-frame Beehives with 6-cm sides and with 4-position disc mounted DIM: 310 x 500 mm
WOODEN COVER D.B. 7-frame Beehives with 6-cm sides and with 4-position disc mounted DIM: 310 x 500 mm
€14.50Price
€428.00Price
Electric resistance heating cable, 13 meters long, to be coiled around medium to small containers of crystallized honey Complete with thermostat to ensure accurate temperature control and respect good honey qualities Alim. : (220V - 350 W)
€428.00Price
Electric resistance heating cable, 13 meters long, to be coiled around medium to small containers of crystallized honey Complete with thermostat to ensure accurate temperature control and respect good honey qualities Alim. : (220V - 350 W)
Electric resistance heating cable, 13 meters long, to be coiled around medium to small containers of crystallized honey Complete with thermostat to ensure accurate temperature control and respect good honey qualities Alim. : (220V - 350 W)
€428.00Price
€13.00Price
Transparent Food grade polycarbonate lid for 25 and 50 kg MATURATOR - Dim. : Diameter 34 cm
€13.00Price
Transparent Food grade polycarbonate lid for 25 and 50 kg MATURATOR - Dim. : Diameter 34 cm
Transparent Food grade polycarbonate lid for 25 and 50 kg MATURATOR - Dim. : Diameter 34 cm
€13.00Price
€75.00Price
INVERTER POWER SUPPLY INPUT 12V= (VEHICLES' CIGAR LIGHTER SOCKET) - OUTPUT at 220 V - 50 Hz with UNIVERSAL EUROPEAN SOCKET POWER : 300 W at inrush - 150 W continuous ELECTRICAL SAFETY PROTECTION (fuses).
€75.00Price
INVERTER POWER SUPPLY INPUT 12V= (VEHICLES' CIGAR LIGHTER SOCKET) - OUTPUT at 220 V - 50 Hz with UNIVERSAL EUROPEAN SOCKET POWER : 300 W at inrush - 150 W continuous ELECTRICAL SAFETY PROTECTION (fuses).
INVERTER POWER SUPPLY INPUT 12V= (VEHICLES' CIGAR LIGHTER SOCKET) - OUTPUT at 220 V - 50 Hz with UNIVERSAL EUROPEAN SOCKET POWER : 300 W at inrush - 150 W continuous ELECTRICAL SAFETY PROTECTION (fuses).
€75.00Price
€120.00Price
MANUAL TRANSMISSION FOR GIORDAN MANUAL EXTRACTOR 9 Honeycombs DIAMETER 620 mm Crimped BOTTOM WITH BRAKE (old type)ROTATION TOWARDS ONE WAY AND WITH BRAKE AS PER SAFETY REGULATIONS, COMPLETE WITH VERNICULATED TRANSVERSAL BAR (PIN EXCLUDED)COMPATIBLE WITH - 20 HONEYFARM D.B. CRIMPED BOTTOM- 6 HONEYCOMB LANGSTROTH CRIMPED BOTTOM- 4 HONEYCOMB SPAIN CRIMPED BOTTOMATON.B.: BEFORE ORDERING PLEASE CHECK THE SPECIFICATIONS CAREFULLY IF THEY ARE CORRECT!
€120.00Price
MANUAL TRANSMISSION FOR GIORDAN MANUAL EXTRACTOR 9 Honeycombs DIAMETER 620 mm Crimped BOTTOM WITH BRAKE (old type)ROTATION TOWARDS ONE WAY AND WITH BRAKE AS PER SAFETY REGULATIONS, COMPLETE WITH VERNICULATED TRANSVERSAL BAR (PIN EXCLUDED)COMPATIBLE WITH - 20 HONEYFARM D.B. CRIMPED BOTTOM- 6 HONEYCOMB LANGSTROTH CRIMPED BOTTOM- 4 HONEYCOMB SPAIN CRIMPED BOTTOMATON.B.: BEFORE ORDERING PLEASE CHECK THE SPECIFICATIONS CAREFULLY IF THEY ARE CORRECT!
MANUAL TRANSMISSION FOR GIORDAN MANUAL EXTRACTOR 9 Honeycombs DIAMETER 620 mm Crimped BOTTOM WITH BRAKE (old type)ROTATION TOWARDS ONE WAY AND WITH BRAKE AS PER SAFETY REGULATIONS, COMPLETE WITH VERNICULATED TRANSVERSAL BAR (PIN EXCLUDED)COMPATIBLE WITH - 20 HONEYFARM D.B. CRIMPED BOTTOM- 6 HONEYCOMB LANGSTROTH CRIMPED BOTTOM- 4 HONEYCOMB SPAIN CRIMPED BOTTOMATON.B.: BEFORE ORDERING PLEASE CHECK THE SPECIFICATIONS CAREFULLY IF THEY ARE CORRECT!
€120.00Price
€1.30Price
Langstroth frame with wire for nest body or Honey super body (without wax sheets) Thickness 25mm Dimensions: Length = 48cm Height = 23cm
€1.30Price
Langstroth frame with wire for nest body or Honey super body (without wax sheets) Thickness 25mm Dimensions: Length = 48cm Height = 23cm
Langstroth frame with wire for nest body or Honey super body (without wax sheets) Thickness 25mm Dimensions: Length = 48cm Height = 23cm
€1.30Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€32.90Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€32.90Price
€32.90Price
Mold height: 65 mm- Wick: 3 mm- Weight: 40 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€32.90Price
Mold height: 65 mm- Wick: 3 mm- Weight: 40 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Mold height: 65 mm- Wick: 3 mm- Weight: 40 g Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€32.90Price
€5.50Price
AMERICA-type economical beekeeping lever with broad chisel at one end and scraper at the other.
Length 25 cm
€5.50Price
AMERICA-type economical beekeeping lever with broad chisel at one end and scraper at the other.
Length 25 cm
AMERICA-type economical beekeeping lever with broad chisel at one end and scraper at the other.
Length 25 cm
€5.50Price
WHEN TO USE Spring, summer and winter in the absence of brood (induced or natural) HOW TO USE Drip administration
€142.00Price
WHEN TO USE Spring, summer and winter in the absence of brood (induced or natural) HOW TO USE Drip administration
€142.00Price
€142.00Price
Oxalic acid and glycerol-based veterinary medicine for Beehives READY FOR USE 5 L canister - Dispenser cap option (Code CL TAPBIO5L) AUTHORIZED PRODUCT FOR VETERINARY USE THIS PRODUCT CAN ONLY BE SOLD IN ITALY Technical data sheet see attached
€142.00Price
Oxalic acid and glycerol-based veterinary medicine for Beehives READY FOR USE 5 L canister - Dispenser cap option (Code CL TAPBIO5L) AUTHORIZED PRODUCT FOR VETERINARY USE THIS PRODUCT CAN ONLY BE SOLD IN ITALY Technical data sheet see attached
Oxalic acid and glycerol-based veterinary medicine for Beehives READY FOR USE 5 L canister - Dispenser cap option (Code CL TAPBIO5L) AUTHORIZED PRODUCT FOR VETERINARY USE THIS PRODUCT CAN ONLY BE SOLD IN ITALY Technical data sheet see attached
€142.00Price
€56.00Price
100% cotton yellow canvas jacket.
ASTRONAUTA veil made of durable plastic mesh and cotton on the back, with fully detachable zipper and velcro for front closure.
The veil rests on the shoulders preventing the discomfort (of sweat) of those that rest only on the head.
Elastic cuffs 3 large front pockets
€56.00Price
100% cotton yellow canvas jacket.
ASTRONAUTA veil made of durable plastic mesh and cotton on the back, with fully detachable zipper and velcro for front closure.
The veil rests on the shoulders preventing the discomfort (of sweat) of those that rest only on the head.
Elastic cuffs 3 large front pockets
100% cotton yellow canvas jacket.
ASTRONAUTA veil made of durable plastic mesh and cotton on the back, with fully detachable zipper and velcro for front closure.
The veil rests on the shoulders preventing the discomfort (of sweat) of those that rest only on the head.
Elastic cuffs 3 large front pockets
€56.00Price
Beehive reinforcing spacer made of polystyrene with 6 notches, two for each Beehive - Dimensions: Inner L=23.2cm Outer L=27.3cm
€2.20Price
Beehive reinforcing spacer made of polystyrene with 6 notches, two for each Beehive - Dimensions: Inner L=23.2cm Outer L=27.3cm
€2.20Price
€2.20Price
Front reinforcing spacer for beehive and honeycomb D.B. 6-notch polystyrene frames For Beehives or polystyrene honeycombs with 25 mm thick walls
€2.20Price
Front reinforcing spacer for beehive and honeycomb D.B. 6-notch polystyrene frames For Beehives or polystyrene honeycombs with 25 mm thick walls
Front reinforcing spacer for beehive and honeycomb D.B. 6-notch polystyrene frames For Beehives or polystyrene honeycombs with 25 mm thick walls
€2.20Price
Published in 1983, the volume collects the detailed accounts of the long and numerous research trips throughout the Mediterranean area, to which the scholar personally identified and chose the queens of the purest strains of each breed, then introduced them to the abbey's apiaries in England, and then studied them for decades, breeding them in purity and in crossbreeding-as his famous comparative tests well document. In the journals of his travels, the backdrop is the scenery of countries very different from each other and in the history they are passing through: the monk's encounters with bees, beekeepers, personalities and institutions turn into fascinating tales that draw the reader into distant and now vanished worlds (even when it comes to Italy!). Documented by the photographs of the time, these journals full of reflections and considerations constitute a work of immense historical value for bee geography-not only of bees but also of man's work. Father Adam observes alpine valleys and deserts, forests and mountains, almost always in the flowering season and always from the point of view of bees and their lives, in very different habitats and grappling with different problems. All, as is his custom, without ever losing sight of the purpose and the practical goal, the search for the 'best variety of bees,' the treasure, to be brought back home, like a modern Jason, to be a gift to mankind.
€18.00Price
Published in 1983, the volume collects the detailed accounts of the long and numerous research trips throughout the Mediterranean area, to which the scholar personally identified and chose the queens of the purest strains of each breed, then introduced them to the abbey's apiaries in England, and then studied them for decades, breeding them in purity and in crossbreeding-as his famous comparative tests well document. In the journals of his travels, the backdrop is the scenery of countries very different from each other and in the history they are passing through: the monk's encounters with bees, beekeepers, personalities and institutions turn into fascinating tales that draw the reader into distant and now vanished worlds (even when it comes to Italy!). Documented by the photographs of the time, these journals full of reflections and considerations constitute a work of immense historical value for bee geography-not only of bees but also of man's work. Father Adam observes alpine valleys and deserts, forests and mountains, almost always in the flowering season and always from the point of view of bees and their lives, in very different habitats and grappling with different problems. All, as is his custom, without ever losing sight of the purpose and the practical goal, the search for the 'best variety of bees,' the treasure, to be brought back home, like a modern Jason, to be a gift to mankind.
€18.00Price
€18.00Price
Accounts of famous journeys with the results of studies conducted on breeds and crossbreeds By Father Adam Montaonda Editions
€18.00Price
Accounts of famous journeys with the results of studies conducted on breeds and crossbreeds By Father Adam Montaonda Editions
Accounts of famous journeys with the results of studies conducted on breeds and crossbreeds By Father Adam Montaonda Editions
€18.00Price
Replacement for Dadant Blatt 10-frame polystyrene Beehive
€5.50Price
Replacement for Dadant Blatt 10-frame polystyrene Beehive
€5.50Price
€5.50Price
"Wear-resistant" polystyrene door for 10-frame Beehives
€5.50Price
"Wear-resistant" polystyrene door for 10-frame Beehives
"Wear-resistant" polystyrene door for 10-frame Beehives
€5.50Price
€4.50Price
Indelible marker for conveniently marking queens available in various colors YELLOW: year 2017 2022 2027 RED: year 2018 2023 2028 GREEN: year 2019 2024 2019 BLUE: year 2020 2025 2030 WHITE: year 2021 2026 2031
€4.50Price
Indelible marker for conveniently marking queens available in various colors YELLOW: year 2017 2022 2027 RED: year 2018 2023 2028 GREEN: year 2019 2024 2019 BLUE: year 2020 2025 2030 WHITE: year 2021 2026 2031
Indelible marker for conveniently marking queens available in various colors YELLOW: year 2017 2022 2027 RED: year 2018 2023 2028 GREEN: year 2019 2024 2019 BLUE: year 2020 2025 2030 WHITE: year 2021 2026 2031
€4.50Price
€40.00Price
100-kg stainless steel MATURATOR SUPPORT REMOVABLE(supplied disassembled with bolts and nuts for assembly)
€40.00Price
100-kg stainless steel MATURATOR SUPPORT REMOVABLE(supplied disassembled with bolts and nuts for assembly)
100-kg stainless steel MATURATOR SUPPORT REMOVABLE(supplied disassembled with bolts and nuts for assembly)
€40.00Price
€14.60Price
EXCLUDE DIAFRAM QUEEN from D.B. nest - made of STEEL with wooden frameTo isolate the queen on one side of the Beehive
€14.60Price
EXCLUDE DIAFRAM QUEEN from D.B. nest - made of STEEL with wooden frameTo isolate the queen on one side of the Beehive
EXCLUDE DIAFRAM QUEEN from D.B. nest - made of STEEL with wooden frameTo isolate the queen on one side of the Beehive
€14.60Price
Beehives D.B. 12 FAVIES only CUBE nest with movable anti-moth net bottom with 12 THREADED CANVAS. Nest-cover with 4-position disc mounted-cover in galvanized sheet metal 10 cm high-lined with wood and faestile on the bottom-girrules galvanized-metal door-3 angles from connection-spacers mounted in the nest-fixed anti-varroa net bottom with removable galvanized sheet metal bottom from the back-woods made of seasoned fir, thickness 25mm-walls assembled with screws-handles for transport-Frame rest Painted
€108.00Price
Beehives D.B. 12 FAVIES only CUBE nest with movable anti-moth net bottom with 12 THREADED CANVAS. Nest-cover with 4-position disc mounted-cover in galvanized sheet metal 10 cm high-lined with wood and faestile on the bottom-girrules galvanized-metal door-3 angles from connection-spacers mounted in the nest-fixed anti-varroa net bottom with removable galvanized sheet metal bottom from the back-woods made of seasoned fir, thickness 25mm-walls assembled with screws-handles for transport-Frame rest Painted
€108.00Price
€108.00Price
Beehive Dadant Blatt 12-frame Beehive Cube with movable anti-varroa mesh bottom. Complete with 12 mounted, drilled and strung nest frames (without wax sheets) (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€108.00Price
Beehive Dadant Blatt 12-frame Beehive Cube with movable anti-varroa mesh bottom. Complete with 12 mounted, drilled and strung nest frames (without wax sheets) (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehive Dadant Blatt 12-frame Beehive Cube with movable anti-varroa mesh bottom. Complete with 12 mounted, drilled and strung nest frames (without wax sheets) (COLOR IN PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€108.00Price
Beehives D.B 10 honeycomb painted cube with mobile anti-varroa bottom complete with: Nest; 10 brood frames mounted, drilled and threaded; honeycomb cover with mounted 4-position disc; 10cm high galvanized sheet metal cover lined with wood and faestile on the bottom; metal door; 3 connection angles; 10-frame spacers mounted in the nest; movable anti-moth net bottom with galvanized sheet metal tray removable from the back; 25mm thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest; spring hook with screws for fixing movable bottom
€100.00Price
Beehives D.B 10 honeycomb painted cube with mobile anti-varroa bottom complete with: Nest; 10 brood frames mounted, drilled and threaded; honeycomb cover with mounted 4-position disc; 10cm high galvanized sheet metal cover lined with wood and faestile on the bottom; metal door; 3 connection angles; 10-frame spacers mounted in the nest; movable anti-moth net bottom with galvanized sheet metal tray removable from the back; 25mm thick seasoned fir wood; walls assembled with screws; carrying handles; Frame rest; spring hook with screws for fixing movable bottom
€100.00Price
€100.00Price
Beehive Dadant Blatt 10-frame Beehive Cube with movable anti-varroa mesh bottom. Complete with 10 mounted, drilled and strung nest frames (without wax sheets) Water-painted (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€100.00Price
Beehive Dadant Blatt 10-frame Beehive Cube with movable anti-varroa mesh bottom. Complete with 10 mounted, drilled and strung nest frames (without wax sheets) Water-painted (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
Beehive Dadant Blatt 10-frame Beehive Cube with movable anti-varroa mesh bottom. Complete with 10 mounted, drilled and strung nest frames (without wax sheets) Water-painted (THE COLOR IN THE PHOTO IS CASUAL AND DEPENDS ON AVAILABILITY)
€100.00Price
Candied paste - Complementary feed for bees Sugar composition : Fructose 42% Dextrose 51.5% Maltose 2.5% Triose 2% Sucrose 2%
€42.00Price
Candied paste - Complementary feed for bees Sugar composition : Fructose 42% Dextrose 51.5% Maltose 2.5% Triose 2% Sucrose 2%
€42.00Price
€42.00Price
Package of 20 packs of 1 kg - total 20 kg Origin : Greece
€42.00Price
Package of 20 packs of 1 kg - total 20 kg Origin : Greece
Package of 20 packs of 1 kg - total 20 kg Origin : Greece
€42.00Price
€0.78Price
Spray for glass bottle up to 50 ml - with key cover - Mouth PFP 18 - Straw length 10 cm Bag of 100 pieces - See Discount Quantity
€0.78Price
Spray for glass bottle up to 50 ml - with key cover - Mouth PFP 18 - Straw length 10 cm Bag of 100 pieces - See Discount Quantity
Spray for glass bottle up to 50 ml - with key cover - Mouth PFP 18 - Straw length 10 cm Bag of 100 pieces - See Discount Quantity
€0.78Price
€13.00Price
Replacement small nylon honey BAG FILTER with elastic band for small double filter - 300 micron mesh - For DOUBLE FILTER (Code FO 2600)
Medium DIAMETER: 22/43 Cm - Height : 38 cm
€13.00Price
Replacement small nylon honey BAG FILTER with elastic band for small double filter - 300 micron mesh - For DOUBLE FILTER (Code FO 2600)
Medium DIAMETER: 22/43 Cm - Height : 38 cm
Replacement small nylon honey BAG FILTER with elastic band for small double filter - 300 micron mesh - For DOUBLE FILTER (Code FO 2600)
Medium DIAMETER: 22/43 Cm - Height : 38 cm
€13.00Price
The trap is placed inside the Beehive, resting high among the combs near the brood. The small beetle is attracted to the liquid in the trap from which it will not be able to leave (add about 25-30 ml of white mineral oil or vegetable oil with apple cider vinegar to the middle of the trap). The trap is infinitely reusable because the lid can be opened to empty it of dead beetles and wash it for reuse
€4.50Price
The trap is placed inside the Beehive, resting high among the combs near the brood. The small beetle is attracted to the liquid in the trap from which it will not be able to leave (add about 25-30 ml of white mineral oil or vegetable oil with apple cider vinegar to the middle of the trap). The trap is infinitely reusable because the lid can be opened to empty it of dead beetles and wash it for reuse
€4.50Price
€4.50Price
Plastic trap for catching "Aethina Tumida" To be placed inside the Beehive, to be placed on top, between the combs
€4.50Price
Plastic trap for catching "Aethina Tumida" To be placed inside the Beehive, to be placed on top, between the combs
Plastic trap for catching "Aethina Tumida" To be placed inside the Beehive, to be placed on top, between the combs
€4.50Price
€1,150.00Price
D.B. MOTOR ELOBA 110W/230V TANGENTIAL Extractor with variable speed in the 2 directions - for 8 Honey super and 4 brood frames or 4 LANGSTROTH frames - with stainless steel basket (Cod.QI C116) - Ø 620 mm - Nylon cutting tap diam. 40 mm
€1,150.00Price
D.B. MOTOR ELOBA 110W/230V TANGENTIAL Extractor with variable speed in the 2 directions - for 8 Honey super and 4 brood frames or 4 LANGSTROTH frames - with stainless steel basket (Cod.QI C116) - Ø 620 mm - Nylon cutting tap diam. 40 mm
D.B. MOTOR ELOBA 110W/230V TANGENTIAL Extractor with variable speed in the 2 directions - for 8 Honey super and 4 brood frames or 4 LANGSTROTH frames - with stainless steel basket (Cod.QI C116) - Ø 620 mm - Nylon cutting tap diam. 40 mm
€1,150.00Price
€840.00Price
LANGSTROTH TANGENTIAL EXTRACTOR MOTOR ELOBA 110W/230V variable speed in the 2 directions - with basket for 4 combs with stainless steel basket (Code QI C55) - Ø 525 - Nylon shear tap diam. 40 mm
€840.00Price
LANGSTROTH TANGENTIAL EXTRACTOR MOTOR ELOBA 110W/230V variable speed in the 2 directions - with basket for 4 combs with stainless steel basket (Code QI C55) - Ø 525 - Nylon shear tap diam. 40 mm
LANGSTROTH TANGENTIAL EXTRACTOR MOTOR ELOBA 110W/230V variable speed in the 2 directions - with basket for 4 combs with stainless steel basket (Code QI C55) - Ø 525 - Nylon shear tap diam. 40 mm
€840.00Price
€5.90Price
EXCLUDE-Steel grid 27.3 x 50 cm for D.B. 6-frame Beehives
€5.90Price
EXCLUDE-Steel grid 27.3 x 50 cm for D.B. 6-frame Beehives
EXCLUDE-Steel grid 27.3 x 50 cm for D.B. 6-frame Beehives
€5.90Price
Two-way round sheet metal Bee escape (without board)
€3.50Price
Two-way round sheet metal Bee escape (without board)
€3.50Price
€3.50Price
Two-way round sheet metal Bee escape (without board)
€3.50Price
Two-way round sheet metal Bee escape (without board)
Two-way round sheet metal Bee escape (without board)
€3.50Price
€11.50Price
COMPLETE GASKET SERIES SPARE KIT FOR OXALIC ACID DOSER 5 ml - MINI INJECTOR(Code EN 1780)
€11.50Price
COMPLETE GASKET SERIES SPARE KIT FOR OXALIC ACID DOSER 5 ml - MINI INJECTOR(Code EN 1780)
COMPLETE GASKET SERIES SPARE KIT FOR OXALIC ACID DOSER 5 ml - MINI INJECTOR(Code EN 1780)
€11.50Price
- -€2.00
€14.00Regular price-€2.00€16.00Price
Hi-Risk disposable gloves from the Pro Professional Division line, designed by ICO in blue latex for multi-purpose professional use offering excellent sensitivity, dexterity and comfort.Hi-Risk Pro Professional ICO is an ambidextrous disposable glove produced in high-strength blue natural rubber latex, subjected to chlorination process therefore with very low protein content (<50μg/g) and without lubricating powder with a matte inner and micro-roughened outer finish beading of increased thickness and length.Hi-Risk Pro Professional blue latex disposable gloves have excellent elasticity at low temperatures, excellent chemical resistance to diluted detergents and cleansers and aqueous solutions of compounds in general, ideal for the chemical industry, pharmaceutical industry, aesthetics and hygiene laboratories for the community and mechanical work in workshops and body shops.
EN ISO 374-5:2016 VIRUS
EN ISO 374-1:2016
CHEMICAL HAZARDS
- -€2.00
€14.00Regular price-€2.00€16.00Price
Hi-Risk disposable gloves from the Pro Professional Division line, designed by ICO in blue latex for multi-purpose professional use offering excellent sensitivity, dexterity and comfort.Hi-Risk Pro Professional ICO is an ambidextrous disposable glove produced in high-strength blue natural rubber latex, subjected to chlorination process therefore with very low protein content (<50μg/g) and without lubricating powder with a matte inner and micro-roughened outer finish beading of increased thickness and length.Hi-Risk Pro Professional blue latex disposable gloves have excellent elasticity at low temperatures, excellent chemical resistance to diluted detergents and cleansers and aqueous solutions of compounds in general, ideal for the chemical industry, pharmaceutical industry, aesthetics and hygiene laboratories for the community and mechanical work in workshops and body shops.
EN ISO 374-5:2016 VIRUS
EN ISO 374-1:2016
CHEMICAL HAZARDS
- -€2.00
Hi-Risk disposable gloves from the Pro Professional Division line, designed by ICO in blue latex for multi-purpose professional use offering excellent sensitivity, dexterity and comfort.Hi-Risk Pro Professional ICO is an ambidextrous disposable glove produced in high-strength blue natural rubber latex, subjected to chlorination process therefore with very low protein content (<50μg/g) and without lubricating powder with a matte inner and micro-roughened outer finish beading of increased thickness and length.Hi-Risk Pro Professional blue latex disposable gloves have excellent elasticity at low temperatures, excellent chemical resistance to diluted detergents and cleansers and aqueous solutions of compounds in general, ideal for the chemical industry, pharmaceutical industry, aesthetics and hygiene laboratories for the community and mechanical work in workshops and body shops.
EN ISO 374-5:2016 VIRUS
EN ISO 374-1:2016
CHEMICAL HAZARDS
€14.00Regular price-€2.00€16.00Price
€0.80Price
Cardboard gift box for No. 1 250 g (212 ml) jar of honey In HONDULATED CANNET series BROWN Size: 7 x 7 x h 9 cm SEE QUANTITY DISCOUNT
€0.80Price
Cardboard gift box for No. 1 250 g (212 ml) jar of honey In HONDULATED CANNET series BROWN Size: 7 x 7 x h 9 cm SEE QUANTITY DISCOUNT
Cardboard gift box for No. 1 250 g (212 ml) jar of honey In HONDULATED CANNET series BROWN Size: 7 x 7 x h 9 cm SEE QUANTITY DISCOUNT
€0.80Price
€0.26Price
Cap for larva holder without dome - NICOT (HY G-0009) 371
€0.26Price
Cap for larva holder without dome - NICOT (HY G-0009) 371
Cap for larva holder without dome - NICOT (HY G-0009) 371
€0.26Price
€1.10Price
Total length: cm 14 Handle length: cm 11 SEE QUANTITY DISCOUNT
€1.10Price
Total length: cm 14 Handle length: cm 11 SEE QUANTITY DISCOUNT
Total length: cm 14 Handle length: cm 11 SEE QUANTITY DISCOUNT
€1.10Price
To be inserted into Free Work T2 or T3 fertilization Nucleus hives (code PI 45/B , P45/C )
€6.90Price
To be inserted into Free Work T2 or T3 fertilization Nucleus hives (code PI 45/B , P45/C )
€6.90Price
€6.90Price
Accordion frame for Free Work Nucleus hives T2 and T3 for queen production (extended becomes a regular Dadant Blatt nesting frame) With two metal clips to hold it open
€6.90Price
Accordion frame for Free Work Nucleus hives T2 and T3 for queen production (extended becomes a regular Dadant Blatt nesting frame) With two metal clips to hold it open
Accordion frame for Free Work Nucleus hives T2 and T3 for queen production (extended becomes a regular Dadant Blatt nesting frame) With two metal clips to hold it open
€6.90Price
€34.00Price
Chrome-plated steel PIN SHAFT for Extractor basket QUARTERS with 16 mm diameter Length 64 cm
€34.00Price
Chrome-plated steel PIN SHAFT for Extractor basket QUARTERS with 16 mm diameter Length 64 cm
Chrome-plated steel PIN SHAFT for Extractor basket QUARTERS with 16 mm diameter Length 64 cm
€34.00Price
€6.20Price
DRILLED SLAB GRID replacement for pollen collection trap made of plastic material Dim: 11 x 36.5 cm - thickness 1.5 mm (for trap Cod. QI T16)
€6.20Price
DRILLED SLAB GRID replacement for pollen collection trap made of plastic material Dim: 11 x 36.5 cm - thickness 1.5 mm (for trap Cod. QI T16)
DRILLED SLAB GRID replacement for pollen collection trap made of plastic material Dim: 11 x 36.5 cm - thickness 1.5 mm (for trap Cod. QI T16)
€6.20Price
€58.00Price
STAINLESS STEEL CUT TAP Ø mm 50 - 2" Stainless steel screws and food grade silicone gaskets
Made in Italy
€58.00Price
STAINLESS STEEL CUT TAP Ø mm 50 - 2" Stainless steel screws and food grade silicone gaskets
Made in Italy
STAINLESS STEEL CUT TAP Ø mm 50 - 2" Stainless steel screws and food grade silicone gaskets
Made in Italy
€58.00Price
€25.00Price
Replacement polycarbonate cover for Extractor diameter 390 mm OPTIONS: - COUPLE - HALF COVER
€25.00Price
Replacement polycarbonate cover for Extractor diameter 390 mm OPTIONS: - COUPLE - HALF COVER
Replacement polycarbonate cover for Extractor diameter 390 mm OPTIONS: - COUPLE - HALF COVER
€25.00Price
€21.00Price
Replacement galvanized sheet metal TANK for solar waxer (cod.QI S04) DIM : Length 59 cm - Width 13 cm - Height 8 cm
€21.00Price
Replacement galvanized sheet metal TANK for solar waxer (cod.QI S04) DIM : Length 59 cm - Width 13 cm - Height 8 cm
Replacement galvanized sheet metal TANK for solar waxer (cod.QI S04) DIM : Length 59 cm - Width 13 cm - Height 8 cm
€21.00Price
CENTRIFUGAL FOR 30 L OPERATOR Electronic 230V 0.40 W Speed max 800 rpm Electronic control panel with keypad and membrane Setting extraction cycles Reversing basket rotation Shutoff timer Capacity 30 L Conical lid with central load Dimensions : Diameter 340 mm - Height 290 mm Made entirely of AISI 304 stainless steel Total conical discharge Power supply 230 V 0.75 Kw Optionals filter bag,tap QI R04 Max speed 800 rpm (0-800) Electronic control panel with membrane keypad Extraction cycle setting Basket rotation reversal Shutoff timer Capacity lt 30 Diameter 340 H 290 Lid with central load Built entirely of AISI 304 stainless steel 2" drain Power supply 230 volts 0.37 kw
€5,000.00Price
CENTRIFUGAL FOR 30 L OPERATOR Electronic 230V 0.40 W Speed max 800 rpm Electronic control panel with keypad and membrane Setting extraction cycles Reversing basket rotation Shutoff timer Capacity 30 L Conical lid with central load Dimensions : Diameter 340 mm - Height 290 mm Made entirely of AISI 304 stainless steel Total conical discharge Power supply 230 V 0.75 Kw Optionals filter bag,tap QI R04 Max speed 800 rpm (0-800) Electronic control panel with membrane keypad Extraction cycle setting Basket rotation reversal Shutoff timer Capacity lt 30 Diameter 340 H 290 Lid with central load Built entirely of AISI 304 stainless steel 2" drain Power supply 230 volts 0.37 kw
€5,000.00Price
€5,000.00Price
30-liter OPERATING CENTRIFUGES electronic 230V - 0.40 W OPTIONS not supplied : - COARSE MESH FILTER BAG (Code QI S115) - FINE MESH FILTER BAG (Code QI S135)
€5,000.00Price
30-liter OPERATING CENTRIFUGES electronic 230V - 0.40 W OPTIONS not supplied : - COARSE MESH FILTER BAG (Code QI S115) - FINE MESH FILTER BAG (Code QI S135)
30-liter OPERATING CENTRIFUGES electronic 230V - 0.40 W OPTIONS not supplied : - COARSE MESH FILTER BAG (Code QI S115) - FINE MESH FILTER BAG (Code QI S135)
€5,000.00Price
D.B. stainless steel bench for uncapping with basin cm.100x48x40 with lectern with lid and stainless steel legs Stainless steel basin Filter for decanting operculum in perforated stainless steel sheet Nylon tap code QI R11 Ø 40 mm Stainless steel lectern code QI L11 Stainless steel legs Stainless steel lid Height bench for uncapping 80 cm
€490.00Price
D.B. stainless steel bench for uncapping with basin cm.100x48x40 with lectern with lid and stainless steel legs Stainless steel basin Filter for decanting operculum in perforated stainless steel sheet Nylon tap code QI R11 Ø 40 mm Stainless steel lectern code QI L11 Stainless steel legs Stainless steel lid Height bench for uncapping 80 cm
€490.00Price
€490.00Price
D.B. stainless steel uncapping bench with 104x51x42 cm tank with: - No. 1 stainless steel lectern (code QI L11) (POSSIBILITY TO MOUNT No. 2 LEGS TOGETHER) - Stainless steel basin with reinforcing ribs - Stainless steel operculum decanting filter - Nylon tap (code QI R11) 40 mm diameter - Stainless steel lid - Height bench for uncapping 80 cm
€490.00Price
D.B. stainless steel uncapping bench with 104x51x42 cm tank with: - No. 1 stainless steel lectern (code QI L11) (POSSIBILITY TO MOUNT No. 2 LEGS TOGETHER) - Stainless steel basin with reinforcing ribs - Stainless steel operculum decanting filter - Nylon tap (code QI R11) 40 mm diameter - Stainless steel lid - Height bench for uncapping 80 cm
D.B. stainless steel uncapping bench with 104x51x42 cm tank with: - No. 1 stainless steel lectern (code QI L11) (POSSIBILITY TO MOUNT No. 2 LEGS TOGETHER) - Stainless steel basin with reinforcing ribs - Stainless steel operculum decanting filter - Nylon tap (code QI R11) 40 mm diameter - Stainless steel lid - Height bench for uncapping 80 cm
€490.00Price
€0.40Price
Galvanized GIRL for attaching transport templates or wooden doors for Beehives - 5mm diameter threaded screw
€0.40Price
Galvanized GIRL for attaching transport templates or wooden doors for Beehives - 5mm diameter threaded screw
Galvanized GIRL for attaching transport templates or wooden doors for Beehives - 5mm diameter threaded screw
€0.40Price
With silicon rubber bellows ,reinforced with ribs (also available as spare parts)Nylon cheeks, fiberglass-filled, heat-resistant Silicone suction valve Rear cheek, prepared with preholes for screwing the body to the smoker -adaptable on any model -Air conveyor Air volume lt. 1.20 Weight gr. 300 With cylindrical stainless steel container essential for using pellet fuels
€36.00Price
With silicon rubber bellows ,reinforced with ribs (also available as spare parts)Nylon cheeks, fiberglass-filled, heat-resistant Silicone suction valve Rear cheek, prepared with preholes for screwing the body to the smoker -adaptable on any model -Air conveyor Air volume lt. 1.20 Weight gr. 300 With cylindrical stainless steel container essential for using pellet fuels
€36.00Price
€36.00Price
€36.00Price
€36.00Price
€7.00Price
For dividing Beehive of 6 into 3+3 (Cod.QI A131 and QI A131G)Made of stainless steelMeasures cm 47.3 x 32.6 sp 0.6It fits into the special groove Advantages using the stainless steel diaphragm:With the presence of propolis or wax in the groove enters more easilyThe 0.6 mm thickness, makes sure that the distance between the 2 neighboring combs are respected
€7.00Price
For dividing Beehive of 6 into 3+3 (Cod.QI A131 and QI A131G)Made of stainless steelMeasures cm 47.3 x 32.6 sp 0.6It fits into the special groove Advantages using the stainless steel diaphragm:With the presence of propolis or wax in the groove enters more easilyThe 0.6 mm thickness, makes sure that the distance between the 2 neighboring combs are respected
For dividing Beehive of 6 into 3+3 (Cod.QI A131 and QI A131G)Made of stainless steelMeasures cm 47.3 x 32.6 sp 0.6It fits into the special groove Advantages using the stainless steel diaphragm:With the presence of propolis or wax in the groove enters more easilyThe 0.6 mm thickness, makes sure that the distance between the 2 neighboring combs are respected
€7.00Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€30.80Price
To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.
€30.80Price
€30.80Price
Silicone candle mold with elephantStopper: 3 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€30.80Price
Silicone candle mold with elephantStopper: 3 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
Silicone candle mold with elephantStopper: 3 mm Silicone molds can be used for processing different raw materials: beeswax, soy wax, palm wax, kerosene, epoxy, soap base. They are not suitable for food production.
€30.80Price