€4,350.00Regular price-€450.00€4,800.00Price
Special Products
€28.00Regular price-€10.00€38.00Price
Featured Products
Best sellers
€980.00Price
RADIAL D.B. EXTRACTOR ELOBA MOTOR 110W/230V with variable speed in both directions with stainless steel basket for 12 super honeycombs (or 3 nest frames with supplementary cages) - (basket Cod. QI C101) Ø525
With nylon CUT-OFF TAP Ø 40 mm
For the honeycombs, 3 additional stainless steel cages are required, not included (Cod. QI G06)
€980.00Price
RADIAL D.B. EXTRACTOR ELOBA MOTOR 110W/230V with variable speed in both directions with stainless steel basket for 12 super honeycombs (or 3 nest frames with supplementary cages) - (basket Cod. QI C101) Ø525
With nylon CUT-OFF TAP Ø 40 mm
For the honeycombs, 3 additional stainless steel cages are required, not included (Cod. QI G06)
RADIAL D.B. EXTRACTOR ELOBA MOTOR 110W/230V with variable speed in both directions with stainless steel basket for 12 super honeycombs (or 3 nest frames with supplementary cages) - (basket Cod. QI C101) Ø525
With nylon CUT-OFF TAP Ø 40 mm
For the honeycombs, 3 additional stainless steel cages are required, not included (Cod. QI G06)
DADANT RADIAL HONEY EXTRACTOR, MANUAL DRIVE for 9 super frames or 3 hive frames, STAINLESS BASKET (code QI C11), diameter 525mm, nylon honey gate 1 1/2", transmission with nylon gears (for hive frames, 3 cages QI G06, NOT INCLUDED, are needed), legs included - MADE IN ITALY
€415.00Price
DADANT RADIAL HONEY EXTRACTOR, MANUAL DRIVE for 9 super frames or 3 hive frames, STAINLESS BASKET (code QI C11), diameter 525mm, nylon honey gate 1 1/2", transmission with nylon gears (for hive frames, 3 cages QI G06, NOT INCLUDED, are needed), legs included - MADE IN ITALY
€415.00Price
€415.00Price
DADANT RADIAL HONEY EXTRACTOR, MANUAL DRIVE for 9 super frames or 3 hive frames (3 cages QI G06 NOT INCLUDED are needed), STAINLESS BASKET, diameter 525mm, LEGS INCLUDED
€415.00Price
DADANT RADIAL HONEY EXTRACTOR, MANUAL DRIVE for 9 super frames or 3 hive frames (3 cages QI G06 NOT INCLUDED are needed), STAINLESS BASKET, diameter 525mm, LEGS INCLUDED
DADANT RADIAL HONEY EXTRACTOR, MANUAL DRIVE for 9 super frames or 3 hive frames (3 cages QI G06 NOT INCLUDED are needed), STAINLESS BASKET, diameter 525mm, LEGS INCLUDED
€56.00Price
Double stainless steel lectern for 100-120-150 cm "GIORDAN" uncapping table
Size: Length 42.5 cm - Width 52 cm - Height 38 cm
€56.00Price
Double stainless steel lectern for 100-120-150 cm "GIORDAN" uncapping table
Size: Length 42.5 cm - Width 52 cm - Height 38 cm
Double stainless steel lectern for 100-120-150 cm "GIORDAN" uncapping table
Size: Length 42.5 cm - Width 52 cm - Height 38 cm
€1,980.00Price
"AUTOMATUR" HONEY AUTOMATIC DOSING INVASING MACHINE
Potting machine to make the ripening tap automatic (to be combined)
Suitable for ripeners from 50 to 400 kg with taps of various sizes
Dosing for glass jars from 100 g to 2 Kg
Power supply 220V - 50 Hz - 200 W
€1,980.00Price
"AUTOMATUR" HONEY AUTOMATIC DOSING INVASING MACHINE
Potting machine to make the ripening tap automatic (to be combined)
Suitable for ripeners from 50 to 400 kg with taps of various sizes
Dosing for glass jars from 100 g to 2 Kg
Power supply 220V - 50 Hz - 200 W
"AUTOMATUR" HONEY AUTOMATIC DOSING INVASING MACHINE
Potting machine to make the ripening tap automatic (to be combined)
Suitable for ripeners from 50 to 400 kg with taps of various sizes
Dosing for glass jars from 100 g to 2 Kg
Power supply 220V - 50 Hz - 200 W
€108.00Price
Table-top uncapping desk, with 600x400x180 mm plastic tank, drainer and frame holder lectern in stainless steel.
OPTINON: Without honey tap
With honey tap
€108.00Price
Table-top uncapping desk, with 600x400x180 mm plastic tank, drainer and frame holder lectern in stainless steel.
OPTINON: Without honey tap
With honey tap
Table-top uncapping desk, with 600x400x180 mm plastic tank, drainer and frame holder lectern in stainless steel.
OPTINON: Without honey tap
With honey tap
€42.00Price
Stainless steel shovel for moving crystallized honey - plastic handle
Total length : 60 cm
€42.00Price
Stainless steel shovel for moving crystallized honey - plastic handle
Total length : 60 cm
Stainless steel shovel for moving crystallized honey - plastic handle
Total length : 60 cm
€24.00Price
PROFESSIONAL PLASTIC POLLEN COLLECTING TRAP with round hole grid plus the Asian anti-wasp net.
The trap is complete with:
Metal adapters for fixing to D.B. hives 10 honeycombs in porch - Removable plastic drawer.
Its particular shape allows it to be positioned on all 10-comb hives: Dadant Blatt, with or without small porch, Langstroth, in plastic and in polystyrene
Two different assembly solutions, using the guides for fixing the metal entrance door,
or in front of the hive, by mounting two special ADAPTERS as an option (n. 2 art. QI A96) it can be hooked to CUBO hives, and polystyrene or mobile bottom in plastic
€24.00Price
PROFESSIONAL PLASTIC POLLEN COLLECTING TRAP with round hole grid plus the Asian anti-wasp net.
The trap is complete with:
Metal adapters for fixing to D.B. hives 10 honeycombs in porch - Removable plastic drawer.
Its particular shape allows it to be positioned on all 10-comb hives: Dadant Blatt, with or without small porch, Langstroth, in plastic and in polystyrene
Two different assembly solutions, using the guides for fixing the metal entrance door,
or in front of the hive, by mounting two special ADAPTERS as an option (n. 2 art. QI A96) it can be hooked to CUBO hives, and polystyrene or mobile bottom in plastic
PROFESSIONAL PLASTIC POLLEN COLLECTING TRAP with round hole grid plus the Asian anti-wasp net.
The trap is complete with:
Metal adapters for fixing to D.B. hives 10 honeycombs in porch - Removable plastic drawer.
Its particular shape allows it to be positioned on all 10-comb hives: Dadant Blatt, with or without small porch, Langstroth, in plastic and in polystyrene
Two different assembly solutions, using the guides for fixing the metal entrance door,
or in front of the hive, by mounting two special ADAPTERS as an option (n. 2 art. QI A96) it can be hooked to CUBO hives, and polystyrene or mobile bottom in plastic
€44.00Price
LID FOR GIORDAN EXTRACTOR 20 FRAMES - WELDED MODEL WITH STAINLESS STEEL REINFORCEMENT - (HINGES NOT INCLUDED)
DIAMETER OF THE EXTRACTOR 630 mm
€44.00Price
LID FOR GIORDAN EXTRACTOR 20 FRAMES - WELDED MODEL WITH STAINLESS STEEL REINFORCEMENT - (HINGES NOT INCLUDED)
DIAMETER OF THE EXTRACTOR 630 mm
LID FOR GIORDAN EXTRACTOR 20 FRAMES - WELDED MODEL WITH STAINLESS STEEL REINFORCEMENT - (HINGES NOT INCLUDED)
DIAMETER OF THE EXTRACTOR 630 mm
€38.00Price
LID FOR GIORDAN 9 FRAMES EXTRACTOR WELDED MODEL WITH STAINLESS STEEL REINFORCEMENT - (HINGES NOT INCLUDED)
DIAMETER OF THE EXTRACTOR 525 mm - Dim.: 540 x 240 mm
OPTIONS : PAIR - HALF COVER
€38.00Price
LID FOR GIORDAN 9 FRAMES EXTRACTOR WELDED MODEL WITH STAINLESS STEEL REINFORCEMENT - (HINGES NOT INCLUDED)
DIAMETER OF THE EXTRACTOR 525 mm - Dim.: 540 x 240 mm
OPTIONS : PAIR - HALF COVER
LID FOR GIORDAN 9 FRAMES EXTRACTOR WELDED MODEL WITH STAINLESS STEEL REINFORCEMENT - (HINGES NOT INCLUDED)
DIAMETER OF THE EXTRACTOR 525 mm - Dim.: 540 x 240 mm
OPTIONS : PAIR - HALF COVER
€28.00Price
STEEL PIVOT SHAFT for GIORDAN honey extractor basket with 16mm diameter For honey extractors with 9 and 20 honeycombs
€28.00Price
STEEL PIVOT SHAFT for GIORDAN honey extractor basket with 16mm diameter For honey extractors with 9 and 20 honeycombs
STEEL PIVOT SHAFT for GIORDAN honey extractor basket with 16mm diameter For honey extractors with 9 and 20 honeycombs
Crown board with 4P disc - Wooden roof covered in galvanized sheet metal 10 cm high - plastic moving frame - galvanized stringers-metal door-3 angularfor connection- one angular lever rests - spacers - fixed antivarroa network bottom - with galvanized sheet bottom removable from the back, thickness 25 mm-walls assembled with screws - Transport handles - Pnted.
€106.00Price
Crown board with 4P disc - Wooden roof covered in galvanized sheet metal 10 cm high - plastic moving frame - galvanized stringers-metal door-3 angularfor connection- one angular lever rests - spacers - fixed antivarroa network bottom - with galvanized sheet bottom removable from the back, thickness 25 mm-walls assembled with screws - Transport handles - Pnted.
€106.00Price
€106.00Price
Langstroth hive 10 honeycomb with fixed or mobile mesh bottom of your choice. Only nest with 10 drilled and threaded frames without wax sheets. Choice of standard wood, Hoffman wood and Hoffman plastic frames. Available with and without paint.
€106.00Price
Langstroth hive 10 honeycomb with fixed or mobile mesh bottom of your choice. Only nest with 10 drilled and threaded frames without wax sheets. Choice of standard wood, Hoffman wood and Hoffman plastic frames. Available with and without paint.
Langstroth hive 10 honeycomb with fixed or mobile mesh bottom of your choice. Only nest with 10 drilled and threaded frames without wax sheets. Choice of standard wood, Hoffman wood and Hoffman plastic frames. Available with and without paint.
€20.00Price
Mold height: 45mm Wick: 3x6 Weight: 15g
Mold height: 45mm Wick: 3x6 Weight: 15g
€39.00Price
Silicone mold for candle chicklet with egg
Mold height: 95mm - Diameter: 60mm - Recommended Wick: 3x10 mm -Weight: 135g
€39.00Price
Silicone mold for candle chicklet with egg
Mold height: 95mm - Diameter: 60mm - Recommended Wick: 3x10 mm -Weight: 135g
Silicone mold for candle chicklet with egg
Mold height: 95mm - Diameter: 60mm - Recommended Wick: 3x10 mm -Weight: 135g
€38.00Price
Mold height: 100mm Wick: 3x13 Weight: 95g
€38.00Price
Mold height: 100mm Wick: 3x13 Weight: 95g
Mold height: 100mm Wick: 3x13 Weight: 95g
€35.00Price
Mold height: 65mm Wick: 3x8 Weight: 40g
Mold height: 65mm Wick: 3x8 Weight: 40g
€20.90Price
Silicone mold for candle with marine turtle
Mold height: 30mm - Recommended Wick: 3x10 mm - Weight: 20g
€20.90Price
Silicone mold for candle with marine turtle
Mold height: 30mm - Recommended Wick: 3x10 mm - Weight: 20g
Silicone mold for candle with marine turtle
Mold height: 30mm - Recommended Wick: 3x10 mm - Weight: 20g
€14.80Price
Silicone MOLD for candle with BUTTERFLY - PENDANT Mold height: 45mm Weight 10g
€14.80Price
Silicone MOLD for candle with BUTTERFLY - PENDANT Mold height: 45mm Weight 10g
Silicone MOLD for candle with BUTTERFLY - PENDANT Mold height: 45mm Weight 10g
€50.30Price
Silicone MOLD for candle with STAR 7 cm Mold height: 70 mm Wick: 3x13 Weight: 130g
€50.30Price
Silicone MOLD for candle with STAR 7 cm Mold height: 70 mm Wick: 3x13 Weight: 130g
Silicone MOLD for candle with STAR 7 cm Mold height: 70 mm Wick: 3x13 Weight: 130g
€2.50Price
Suitable for direct contact with food
Measurements: 135 x 85 x 205 mm H
(SEE QUANTITY DISCOUNT)
€2.50Price
Suitable for direct contact with food
Measurements: 135 x 85 x 205 mm H
(SEE QUANTITY DISCOUNT)
Suitable for direct contact with food
Measurements: 135 x 85 x 205 mm H
(SEE QUANTITY DISCOUNT)
€215.00Price
Helical gear drive with freewheel and brake. It is supplied complete with casing, top bar and Ø 14mm, 506 mm long centre shaft, suitable for Ø 630 mm honey extractors. It is easily installed in place of conical gears.
€215.00Price
Helical gear drive with freewheel and brake. It is supplied complete with casing, top bar and Ø 14mm, 506 mm long centre shaft, suitable for Ø 630 mm honey extractors. It is easily installed in place of conical gears.
Helical gear drive with freewheel and brake. It is supplied complete with casing, top bar and Ø 14mm, 506 mm long centre shaft, suitable for Ø 630 mm honey extractors. It is easily installed in place of conical gears.
€225.00Price
Helical gear drive with freewheel and brake. It is supplied complete with casing, top bar and Ø 14mm, 510mm long centre shaft, suitable for Ø 520mm honey extractors. It is easily installed in place of conical gears.
€225.00Price
Helical gear drive with freewheel and brake. It is supplied complete with casing, top bar and Ø 14mm, 510mm long centre shaft, suitable for Ø 520mm honey extractors. It is easily installed in place of conical gears.
Helical gear drive with freewheel and brake. It is supplied complete with casing, top bar and Ø 14mm, 510mm long centre shaft, suitable for Ø 520mm honey extractors. It is easily installed in place of conical gears.
€22.00Price
Silicone rubber mold for the simultaneous production of 10 wax domes
€22.00Price
Silicone rubber mold for the simultaneous production of 10 wax domes
Silicone rubber mold for the simultaneous production of 10 wax domes
€10.00Price
Wooden super for APIDEA hive for fertilization of Queen Bees To be mounted on a wooden hive (Cod.PI 0065/AB) Frames not included (Cod. HY T-0007) Size: Width: 150mm - Depth: 240mm - Height: 170mm
€10.00Price
Wooden super for APIDEA hive for fertilization of Queen Bees To be mounted on a wooden hive (Cod.PI 0065/AB) Frames not included (Cod. HY T-0007) Size: Width: 150mm - Depth: 240mm - Height: 170mm
Wooden super for APIDEA hive for fertilization of Queen Bees To be mounted on a wooden hive (Cod.PI 0065/AB) Frames not included (Cod. HY T-0007) Size: Width: 150mm - Depth: 240mm - Height: 170mm
€48.00Price
1 liter bottle (allows about 100 traps)
Product to be diluted (see dosages below)
HOW TO USE:
The product must not be used pure, but diluted as follows:
10 ml liquid attractant
200ml water
50 g of sugar
Suitable for HORNET TRAP
€48.00Price
1 liter bottle (allows about 100 traps)
Product to be diluted (see dosages below)
HOW TO USE:
The product must not be used pure, but diluted as follows:
10 ml liquid attractant
200ml water
50 g of sugar
Suitable for HORNET TRAP
1 liter bottle (allows about 100 traps)
Product to be diluted (see dosages below)
HOW TO USE:
The product must not be used pure, but diluted as follows:
10 ml liquid attractant
200ml water
50 g of sugar
Suitable for HORNET TRAP
€1.40Price
Cardboard gift box for 2 bottles
In CANNETE' ONDULATO BROWN series
Dimensions: 8.5 x 16 x h 38 cm
Perfect for 2 bottles.
The punched cardboard of the two windows is used as a separator for the bottles.
Practical carrying handle
The box is delivered flat and is self-assembling (easy to assemble in a few simple steps).
SEE DISCOUNT QUANTITY
€1.40Price
Cardboard gift box for 2 bottles
In CANNETE' ONDULATO BROWN series
Dimensions: 8.5 x 16 x h 38 cm
Perfect for 2 bottles.
The punched cardboard of the two windows is used as a separator for the bottles.
Practical carrying handle
The box is delivered flat and is self-assembling (easy to assemble in a few simple steps).
SEE DISCOUNT QUANTITY
Cardboard gift box for 2 bottles
In CANNETE' ONDULATO BROWN series
Dimensions: 8.5 x 16 x h 38 cm
Perfect for 2 bottles.
The punched cardboard of the two windows is used as a separator for the bottles.
Practical carrying handle
The box is delivered flat and is self-assembling (easy to assemble in a few simple steps).
SEE DISCOUNT QUANTITY
€28.00Price
Mold height: 75mm Wick: 3x10 mm Weight: 45g
Mold height: 75mm Wick: 3x10 mm Weight: 45g
€630.00Price
D.B. TANGENTIAL HONEY EXTRACTOR MANUAL with BRAKE with STAINLESS STEEL basket for 6 super or 3 nest frames - Diameter mm
New welded bottom which improves honey discharge
with nylon CUT TAP Ø 40 mm
€630.00Price
D.B. TANGENTIAL HONEY EXTRACTOR MANUAL with BRAKE with STAINLESS STEEL basket for 6 super or 3 nest frames - Diameter mm
New welded bottom which improves honey discharge
with nylon CUT TAP Ø 40 mm
D.B. TANGENTIAL HONEY EXTRACTOR MANUAL with BRAKE with STAINLESS STEEL basket for 6 super or 3 nest frames - Diameter mm
New welded bottom which improves honey discharge
with nylon CUT TAP Ø 40 mm
🐝 VENTILATION PROTECTION – Australian Brand OZ ARMOR beekeeper Jacket is made with a double layer fabric mesh that allows air to circulate around the body protecting against bee stings. Comes with astronaut mask.
🐝 REDUCED RISK OF STINGS – Compared to traditional masks, Oz Armor maintains a protective barrier against bees. Our veils feature a patented insert inside the hood, which moves the shirt away from the face
🐝 EASY TO USE – Velcro and elastic wrists allow adjustment for comfort and the veils attach easily covering the zippers.
🐝 DURABLE & LONG-LASTING – Designed to last for years, our clothing mask is made of sturdy wire mesh, plus the smock features rayon reinforcements for pockets and knee pads.
🐝 ADVANCED FEATURES – YKK zipper.
12 MONTHS WARRANTY.
MESH AIR fabric: It is a double-dimensional and warp-resistant tissuefabric with an abrasion resistance of over 50,000 MARTINDALE cycles that guarantees breathability at the highest levels.
€86.00Price
🐝 VENTILATION PROTECTION – Australian Brand OZ ARMOR beekeeper Jacket is made with a double layer fabric mesh that allows air to circulate around the body protecting against bee stings. Comes with astronaut mask.
🐝 REDUCED RISK OF STINGS – Compared to traditional masks, Oz Armor maintains a protective barrier against bees. Our veils feature a patented insert inside the hood, which moves the shirt away from the face
🐝 EASY TO USE – Velcro and elastic wrists allow adjustment for comfort and the veils attach easily covering the zippers.
🐝 DURABLE & LONG-LASTING – Designed to last for years, our clothing mask is made of sturdy wire mesh, plus the smock features rayon reinforcements for pockets and knee pads.
🐝 ADVANCED FEATURES – YKK zipper.
12 MONTHS WARRANTY.
MESH AIR fabric: It is a double-dimensional and warp-resistant tissuefabric with an abrasion resistance of over 50,000 MARTINDALE cycles that guarantees breathability at the highest levels.
€86.00Price
€86.00Price
OZ ARMOR Double layer Air Mesh Jacket
The main feature of double layer air mesh clothing is lightness (2 layers of lightweight and super resistant breathable mesh).
The first layer of mesh is made of poly cotton. The second layer is made of EVA foam.
IT GUARANTEES PROTECTION AND COMFORT IN THE HOT SEASONS
The jacket is complete of a detachable astronaut hat.
White color. With front zip and zipper to completely detach the mask.
Elastic cuffs in stiff cotton and 4 large front pockets
Available sizes: S-M-L-XL-XXL
€86.00Price
OZ ARMOR Double layer Air Mesh Jacket
The main feature of double layer air mesh clothing is lightness (2 layers of lightweight and super resistant breathable mesh).
The first layer of mesh is made of poly cotton. The second layer is made of EVA foam.
IT GUARANTEES PROTECTION AND COMFORT IN THE HOT SEASONS
The jacket is complete of a detachable astronaut hat.
White color. With front zip and zipper to completely detach the mask.
Elastic cuffs in stiff cotton and 4 large front pockets
Available sizes: S-M-L-XL-XXL
OZ ARMOR Double layer Air Mesh Jacket
The main feature of double layer air mesh clothing is lightness (2 layers of lightweight and super resistant breathable mesh).
The first layer of mesh is made of poly cotton. The second layer is made of EVA foam.
IT GUARANTEES PROTECTION AND COMFORT IN THE HOT SEASONS
The jacket is complete of a detachable astronaut hat.
White color. With front zip and zipper to completely detach the mask.
Elastic cuffs in stiff cotton and 4 large front pockets
Available sizes: S-M-L-XL-XXL
€1.80Price
"Agglomerate" CORK STOPPER for wine bottles
Size 23 x H= 38 mm
CHOICE OF PACKAGING : - 10 pcs.
- 25 pcs.
- 50 pcs
- 50 pcs
€1.80Price
"Agglomerate" CORK STOPPER for wine bottles
Size 23 x H= 38 mm
CHOICE OF PACKAGING : - 10 pcs.
- 25 pcs.
- 50 pcs
- 50 pcs
"Agglomerate" CORK STOPPER for wine bottles
Size 23 x H= 38 mm
CHOICE OF PACKAGING : - 10 pcs.
- 25 pcs.
- 50 pcs
- 50 pcs
€39.00Price
Fertilization nucleus, where the born queens can also be parked, with interior lined in 20mm thick expanded polystyrene
With sheet metal roof; bottom with 4 hollow outlets (one for each nucleus), with 4 different directions
€39.00Price
Fertilization nucleus, where the born queens can also be parked, with interior lined in 20mm thick expanded polystyrene
With sheet metal roof; bottom with 4 hollow outlets (one for each nucleus), with 4 different directions
Fertilization nucleus, where the born queens can also be parked, with interior lined in 20mm thick expanded polystyrene
With sheet metal roof; bottom with 4 hollow outlets (one for each nucleus), with 4 different directions
€4.50Price
Fairing holder rod
stainless steel splint with slot for inserting plastic domes
Possibility of inserting 35 domes (not included)
Its particular shape allows it to contain the fairing without the use of supports.
The fairing can be fixed with wax for greater stability
(TO BE MOUNTED ON THE CUE HOLDER FRAME Cod. QI T09)
€4.50Price
Fairing holder rod
stainless steel splint with slot for inserting plastic domes
Possibility of inserting 35 domes (not included)
Its particular shape allows it to contain the fairing without the use of supports.
The fairing can be fixed with wax for greater stability
(TO BE MOUNTED ON THE CUE HOLDER FRAME Cod. QI T09)
Fairing holder rod
stainless steel splint with slot for inserting plastic domes
Possibility of inserting 35 domes (not included)
Its particular shape allows it to contain the fairing without the use of supports.
The fairing can be fixed with wax for greater stability
(TO BE MOUNTED ON THE CUE HOLDER FRAME Cod. QI T09)
€2.80Price
Wood Screw - Galvanized Steel - 3.5 x 9.5mm - Length 9.5mm - Full Thread - Round Head
Graft Cross cut graft
For fixing bottom nets
(Box of 100 pcs.)
€2.80Price
Wood Screw - Galvanized Steel - 3.5 x 9.5mm - Length 9.5mm - Full Thread - Round Head
Graft Cross cut graft
For fixing bottom nets
(Box of 100 pcs.)
Wood Screw - Galvanized Steel - 3.5 x 9.5mm - Length 9.5mm - Full Thread - Round Head
Graft Cross cut graft
For fixing bottom nets
(Box of 100 pcs.)
€34.00Price
KANUKA HONEY (Kunzea ericoides) Pack of 500 g PRODUCED in NEW ZEALAND Kanuka honey is a very pure honey with a soft consistency, light color and delicate, aromatic and floral flavour.
€34.00Price
KANUKA HONEY (Kunzea ericoides) Pack of 500 g PRODUCED in NEW ZEALAND Kanuka honey is a very pure honey with a soft consistency, light color and delicate, aromatic and floral flavour.
KANUKA HONEY (Kunzea ericoides) Pack of 500 g PRODUCED in NEW ZEALAND Kanuka honey is a very pure honey with a soft consistency, light color and delicate, aromatic and floral flavour.
Thanks to temperature control:- You get a better evaporation of oxalic acid at the lowest temperature possible without running the risk that it, dissociating at higher temperatures, loses efficacy.
- You save time cause there is not necessary cool it between one treatment and the next
treatment time 1:30 minutes per hive- The battery lasts longer- It can run for thousands of cycles of treatment.FURTHERMORE:- The sublimation stops working before they have completely downloaded (and thus before ruining) the battery.- The electrical circuit is isolated from the metal parts and therefore, unlike other sublimators, do not run the risk of short circuit if more sublimators fed with the same battery come in contact with each other.
Power supply features: 12 Volt - 120 Watt (battery not included).Duration of treatment: about 1:30 minutes (3 minutes if you cool it in water between one treatment end the next) Oxalic acid is placed in the cup which will be inserted into the opening of flight. With the heating of the cup, the oxalic acid evaporates. Is thus formed in the hive a mist that covers the bees and all surfaces with a thin layer of oxalic acid crystals. These small crystals are tolerated well by bees but have lethal effect on varroa.The spring cup is connected to a solid grip from which there extends the cable of 3 meters equipped with terminals for the electrical connection.This enhancer is in compliance with European Directives, and therefore a CE mark, and complies with the Rohs Directive on the restriction of hazardous substances in electrical and electronic equipment.
€218.00Price
Thanks to temperature control:- You get a better evaporation of oxalic acid at the lowest temperature possible without running the risk that it, dissociating at higher temperatures, loses efficacy.
- You save time cause there is not necessary cool it between one treatment and the next
treatment time 1:30 minutes per hive- The battery lasts longer- It can run for thousands of cycles of treatment.FURTHERMORE:- The sublimation stops working before they have completely downloaded (and thus before ruining) the battery.- The electrical circuit is isolated from the metal parts and therefore, unlike other sublimators, do not run the risk of short circuit if more sublimators fed with the same battery come in contact with each other.
Power supply features: 12 Volt - 120 Watt (battery not included).Duration of treatment: about 1:30 minutes (3 minutes if you cool it in water between one treatment end the next) Oxalic acid is placed in the cup which will be inserted into the opening of flight. With the heating of the cup, the oxalic acid evaporates. Is thus formed in the hive a mist that covers the bees and all surfaces with a thin layer of oxalic acid crystals. These small crystals are tolerated well by bees but have lethal effect on varroa.The spring cup is connected to a solid grip from which there extends the cable of 3 meters equipped with terminals for the electrical connection.This enhancer is in compliance with European Directives, and therefore a CE mark, and complies with the Rohs Directive on the restriction of hazardous substances in electrical and electronic equipment.
€218.00Price
€218.00Price
12 V stove with temperature control device. The temperature self-regulates to 200° during sublimation.
Made in Italy CE and Rohs compliant.
Equipped with 2 measuring spoons.
€218.00Price
12 V stove with temperature control device. The temperature self-regulates to 200° during sublimation.
Made in Italy CE and Rohs compliant.
Equipped with 2 measuring spoons.
12 V stove with temperature control device. The temperature self-regulates to 200° during sublimation.
Made in Italy CE and Rohs compliant.
Equipped with 2 measuring spoons.
€65.00Price
FILTER 203 Code: 124530000 Filter type: A2B2E2K2P3 R D Category: III Combined screw filter unified EN 148-1 for organic vapors with boiling point higher than 65°C, inorganic gases and vapours, Sulfur Dioxide (SO2 ), Ammonia (NH3 ) and its derivatives, dusts, fumes and mists. The filter can be used with TR82, TR2002 CL2 and TR2002 CL3 or similar masks, provided they are equipped with an EN 148-1 fitting. Uses: BEEKEEPING, AGRICULTURE, bodywork, industry
€65.00Price
FILTER 203 Code: 124530000 Filter type: A2B2E2K2P3 R D Category: III Combined screw filter unified EN 148-1 for organic vapors with boiling point higher than 65°C, inorganic gases and vapours, Sulfur Dioxide (SO2 ), Ammonia (NH3 ) and its derivatives, dusts, fumes and mists. The filter can be used with TR82, TR2002 CL2 and TR2002 CL3 or similar masks, provided they are equipped with an EN 148-1 fitting. Uses: BEEKEEPING, AGRICULTURE, bodywork, industry
FILTER 203 Code: 124530000 Filter type: A2B2E2K2P3 R D Category: III Combined screw filter unified EN 148-1 for organic vapors with boiling point higher than 65°C, inorganic gases and vapours, Sulfur Dioxide (SO2 ), Ammonia (NH3 ) and its derivatives, dusts, fumes and mists. The filter can be used with TR82, TR2002 CL2 and TR2002 CL3 or similar masks, provided they are equipped with an EN 148-1 fitting. Uses: BEEKEEPING, AGRICULTURE, bodywork, industry
€2.80Price
WHITE GLASS BOTTLE with cork stopper
Base side = 4cm h = 22.5cm mouth = 1.8cm
Capacity: 200ml
€2.80Price
WHITE GLASS BOTTLE with cork stopper
Base side = 4cm h = 22.5cm mouth = 1.8cm
Capacity: 200ml
WHITE GLASS BOTTLE with cork stopper
Base side = 4cm h = 22.5cm mouth = 1.8cm
Capacity: 200ml
€112.00Price
Full diameter stainless steel mesh filter for 400 kg ripeners - diameter 62 cm
With full diameter NYLON FILTER for 400 Kg ripeners - With cord for fixing to the ripener
The stainless steel mesh filter allows a first filtration of the honey, the nylon filter a further finer filtration
€112.00Price
Full diameter stainless steel mesh filter for 400 kg ripeners - diameter 62 cm
With full diameter NYLON FILTER for 400 Kg ripeners - With cord for fixing to the ripener
The stainless steel mesh filter allows a first filtration of the honey, the nylon filter a further finer filtration
Full diameter stainless steel mesh filter for 400 kg ripeners - diameter 62 cm
With full diameter NYLON FILTER for 400 Kg ripeners - With cord for fixing to the ripener
The stainless steel mesh filter allows a first filtration of the honey, the nylon filter a further finer filtration
€46.00Price
Stainless steel diaphragm on which bees deposit propolis Complete with wooden frame and protective net D.B. frame dimensions: 47 x 30 cm
€46.00Price
Stainless steel diaphragm on which bees deposit propolis Complete with wooden frame and protective net D.B. frame dimensions: 47 x 30 cm
Stainless steel diaphragm on which bees deposit propolis Complete with wooden frame and protective net D.B. frame dimensions: 47 x 30 cm
€139.00Price
LARGE "U" terminal tube in stainless steel for food pipe diam. 50 mm for honey pump attachment
- WITH anchoring bracket
- Dim.: Width 35 cm x 53 cm long side
€139.00Price
LARGE "U" terminal tube in stainless steel for food pipe diam. 50 mm for honey pump attachment
- WITH anchoring bracket
- Dim.: Width 35 cm x 53 cm long side
LARGE "U" terminal tube in stainless steel for food pipe diam. 50 mm for honey pump attachment
- WITH anchoring bracket
- Dim.: Width 35 cm x 53 cm long side
€11.50Price
FOLDED PAPER FILTER DIAMETER 50 cm - 10 pcs
for filtering propolis solution
€11.50Price
FOLDED PAPER FILTER DIAMETER 50 cm - 10 pcs
for filtering propolis solution
FOLDED PAPER FILTER DIAMETER 50 cm - 10 pcs
for filtering propolis solution
€0.60Price
Transparent plastic jar with white plastic lid With tab for package integrity Diameter: 10 cm Height: 12cm
€0.60Price
Transparent plastic jar with white plastic lid With tab for package integrity Diameter: 10 cm Height: 12cm
Transparent plastic jar with white plastic lid With tab for package integrity Diameter: 10 cm Height: 12cm
€105.00Price
Nylon PREFILTER for filtering honey with bands for reinforcement and grip
Suitable for settling and filtering tanks (QI V21-V02-V25)
€105.00Price
Nylon PREFILTER for filtering honey with bands for reinforcement and grip
Suitable for settling and filtering tanks (QI V21-V02-V25)
Nylon PREFILTER for filtering honey with bands for reinforcement and grip
Suitable for settling and filtering tanks (QI V21-V02-V25)
€690.00Price
MANUAL LABELLER for ROUND JAR
- pot diameter min. 40mm
- pot diameter max. 120mm
- vase height max. 150mm
€690.00Price
MANUAL LABELLER for ROUND JAR
- pot diameter min. 40mm
- pot diameter max. 120mm
- vase height max. 150mm
MANUAL LABELLER for ROUND JAR
- pot diameter min. 40mm
- pot diameter max. 120mm
- vase height max. 150mm
€175.00Price
OXALIC ACID SUBLIMATOR
Structure in stainless steel
supplied with measuring cup/doser
Power supply 12 V (battery) - 125 W
€175.00Price
OXALIC ACID SUBLIMATOR
Structure in stainless steel
supplied with measuring cup/doser
Power supply 12 V (battery) - 125 W
OXALIC ACID SUBLIMATOR
Structure in stainless steel
supplied with measuring cup/doser
Power supply 12 V (battery) - 125 W
€82.00Price
Large bag hopper aluminum FILTER for honey for 200/400 kg ripeners WITH SUPPORT (QI S33)
Diameter: 42 cm, total height 22 cm - Bag attachment diameter: 10 cm
OPTION : PRE-FILTERING NET Diameter 21 cm
€82.00Price
Large bag hopper aluminum FILTER for honey for 200/400 kg ripeners WITH SUPPORT (QI S33)
Diameter: 42 cm, total height 22 cm - Bag attachment diameter: 10 cm
OPTION : PRE-FILTERING NET Diameter 21 cm
Large bag hopper aluminum FILTER for honey for 200/400 kg ripeners WITH SUPPORT (QI S33)
Diameter: 42 cm, total height 22 cm - Bag attachment diameter: 10 cm
OPTION : PRE-FILTERING NET Diameter 21 cm
€130.00Price
“RADIALNOVE” stainless steel radial cage easy-loading version, holding 9 Dadant super frames an suitable for Ø 520mm tanks. It is fitted with a Ø 14mm centre shaft hole.
€130.00Price
“RADIALNOVE” stainless steel radial cage easy-loading version, holding 9 Dadant super frames an suitable for Ø 520mm tanks. It is fitted with a Ø 14mm centre shaft hole.
“RADIALNOVE” stainless steel radial cage easy-loading version, holding 9 Dadant super frames an suitable for Ø 520mm tanks. It is fitted with a Ø 14mm centre shaft hole.
€1,980.00Price
SELF-PRIMING pump, stainless steel body and 90 mm diameter impeller in neoprene, low speed for SELF-PRIMING honey on trolley with rubber wheels
Single-phase power supply 230V/50Hz - 750W
Rotation speed of 195 rpm. in both directions
Weight 34Kg
50mm/2" drive
!!The pump must not run dry even for a very short time as the impeller would be irreparably damaged
€1,980.00Price
SELF-PRIMING pump, stainless steel body and 90 mm diameter impeller in neoprene, low speed for SELF-PRIMING honey on trolley with rubber wheels
Single-phase power supply 230V/50Hz - 750W
Rotation speed of 195 rpm. in both directions
Weight 34Kg
50mm/2" drive
!!The pump must not run dry even for a very short time as the impeller would be irreparably damaged
SELF-PRIMING pump, stainless steel body and 90 mm diameter impeller in neoprene, low speed for SELF-PRIMING honey on trolley with rubber wheels
Single-phase power supply 230V/50Hz - 750W
Rotation speed of 195 rpm. in both directions
Weight 34Kg
50mm/2" drive
!!The pump must not run dry even for a very short time as the impeller would be irreparably damaged
€52.00Price
CHROME-PLATED BRASS BALL VALVE TAP Ø 50 mm -2" - male-female connection - aluminum handle
€52.00Price
CHROME-PLATED BRASS BALL VALVE TAP Ø 50 mm -2" - male-female connection - aluminum handle
CHROME-PLATED BRASS BALL VALVE TAP Ø 50 mm -2" - male-female connection - aluminum handle
€520.00Price
With nylon basket for 9 super frames or 3 DADANT nest frames
Nylon conical transmission - Total discharge bottom
Ø 520 mm - 40 mm plastic cut tap
N° 3 removable painted legs and hinged transparent lid
For the nest frames you need the complementary panels (Cod. LA 4790) NOT INCLUDED
€520.00Price
With nylon basket for 9 super frames or 3 DADANT nest frames
Nylon conical transmission - Total discharge bottom
Ø 520 mm - 40 mm plastic cut tap
N° 3 removable painted legs and hinged transparent lid
For the nest frames you need the complementary panels (Cod. LA 4790) NOT INCLUDED
With nylon basket for 9 super frames or 3 DADANT nest frames
Nylon conical transmission - Total discharge bottom
Ø 520 mm - 40 mm plastic cut tap
N° 3 removable painted legs and hinged transparent lid
For the nest frames you need the complementary panels (Cod. LA 4790) NOT INCLUDED
€1,040.00Price
DRAFT TANK and HONEY FILTERING with 50 mm diameter pump connection complete with fittings and TOTAL DRAIN in SUCTION Size: 90 x 52 x (height) 23 cm Complete with double removable stainless steel under-tap filter Tank inserted in the 2008 series extractors of 45/20 honeycombs Optional not included PREFILTER for OPERCOLI (QI F57)
€1,040.00Price
DRAFT TANK and HONEY FILTERING with 50 mm diameter pump connection complete with fittings and TOTAL DRAIN in SUCTION Size: 90 x 52 x (height) 23 cm Complete with double removable stainless steel under-tap filter Tank inserted in the 2008 series extractors of 45/20 honeycombs Optional not included PREFILTER for OPERCOLI (QI F57)
DRAFT TANK and HONEY FILTERING with 50 mm diameter pump connection complete with fittings and TOTAL DRAIN in SUCTION Size: 90 x 52 x (height) 23 cm Complete with double removable stainless steel under-tap filter Tank inserted in the 2008 series extractors of 45/20 honeycombs Optional not included PREFILTER for OPERCOLI (QI F57)
€256.00Price
RTS-RTO T43 twist-off CAP with FLIP for vacuum packing (diam. 43 mm) for 50 or 35 g honey jar
Smooth EDGE with notches: height = 9 mm
Colour gold
SUITABLE FOR HOT PASTEURIZATION PROCESSES WITH VACUUM SAFETY BUTTON
Box of 3100 pieces
€256.00Price
RTS-RTO T43 twist-off CAP with FLIP for vacuum packing (diam. 43 mm) for 50 or 35 g honey jar
Smooth EDGE with notches: height = 9 mm
Colour gold
SUITABLE FOR HOT PASTEURIZATION PROCESSES WITH VACUUM SAFETY BUTTON
Box of 3100 pieces
RTS-RTO T43 twist-off CAP with FLIP for vacuum packing (diam. 43 mm) for 50 or 35 g honey jar
Smooth EDGE with notches: height = 9 mm
Colour gold
SUITABLE FOR HOT PASTEURIZATION PROCESSES WITH VACUUM SAFETY BUTTON
Box of 3100 pieces
€34.00Price
WOODEN INCLINED SUPPORT SURFACE BOARD for ASSEMBLING WAX SHEETS on FRAMES
€34.00Price
WOODEN INCLINED SUPPORT SURFACE BOARD for ASSEMBLING WAX SHEETS on FRAMES
WOODEN INCLINED SUPPORT SURFACE BOARD for ASSEMBLING WAX SHEETS on FRAMES
€167.00Price
With antivarroa fixed network bottom.
WITH SUPER. With 11 super frames and 12 hive frames with wire and wax.
(COLOR IN PHOTO IS RANDOM AND DEPENDS ON AVAILABILITY)
€167.00Price
With antivarroa fixed network bottom.
WITH SUPER. With 11 super frames and 12 hive frames with wire and wax.
(COLOR IN PHOTO IS RANDOM AND DEPENDS ON AVAILABILITY)
With antivarroa fixed network bottom.
WITH SUPER. With 11 super frames and 12 hive frames with wire and wax.
(COLOR IN PHOTO IS RANDOM AND DEPENDS ON AVAILABILITY)
€55.00Price
Complete handle for "ferret" type anti-varroa vaporizer
€55.00Price
Complete handle for "ferret" type anti-varroa vaporizer
Complete handle for "ferret" type anti-varroa vaporizer
€58.00Price
ROUND PLASTIC DRYER FOR POLLEN, also suitable for drying fruit, vegetables, mushrooms.
Power switch
Adjustable thermostat 35°C-70°C
5 stackable shelves
Power supply 220-240V - 50Hz
Power 250W
External diameter of the shelf 32 cm
€58.00Price
ROUND PLASTIC DRYER FOR POLLEN, also suitable for drying fruit, vegetables, mushrooms.
Power switch
Adjustable thermostat 35°C-70°C
5 stackable shelves
Power supply 220-240V - 50Hz
Power 250W
External diameter of the shelf 32 cm
ROUND PLASTIC DRYER FOR POLLEN, also suitable for drying fruit, vegetables, mushrooms.
Power switch
Adjustable thermostat 35°C-70°C
5 stackable shelves
Power supply 220-240V - 50Hz
Power 250W
External diameter of the shelf 32 cm
€95.00Price
Electronic speed variator for speed variation of universal commutator motors (with carbon brushes) [Drills, Grinders, etc.]
Maintains constant torque even at low engine rpm
Power supply 220V/50Hz - 1000 W - Dim.: 13 x 8.5 x 6.5 cm
NOTES: PROLONGED USE AT LOW REVS MAY OVERHEAT THE ENGINES
CHARACTERISTICS: Watertight plastic container - Power cord. 1.3 m with Sicury socket - fuse with indicator light
- Adjustment potentiometer - Bipolar socket + earth for output
€95.00Price
Electronic speed variator for speed variation of universal commutator motors (with carbon brushes) [Drills, Grinders, etc.]
Maintains constant torque even at low engine rpm
Power supply 220V/50Hz - 1000 W - Dim.: 13 x 8.5 x 6.5 cm
NOTES: PROLONGED USE AT LOW REVS MAY OVERHEAT THE ENGINES
CHARACTERISTICS: Watertight plastic container - Power cord. 1.3 m with Sicury socket - fuse with indicator light
- Adjustment potentiometer - Bipolar socket + earth for output
Electronic speed variator for speed variation of universal commutator motors (with carbon brushes) [Drills, Grinders, etc.]
Maintains constant torque even at low engine rpm
Power supply 220V/50Hz - 1000 W - Dim.: 13 x 8.5 x 6.5 cm
NOTES: PROLONGED USE AT LOW REVS MAY OVERHEAT THE ENGINES
CHARACTERISTICS: Watertight plastic container - Power cord. 1.3 m with Sicury socket - fuse with indicator light
- Adjustment potentiometer - Bipolar socket + earth for output
€31.00Price
Electric heating element for hot air honey dippers (spare part) 220V/50Hz - 2000W
€31.00Price
Electric heating element for hot air honey dippers (spare part) 220V/50Hz - 2000W
Electric heating element for hot air honey dippers (spare part) 220V/50Hz - 2000W
€5,650.00Price
DEHUMIDIFIER FOR HONEY CAPACITY 150 Kg - (Max.180Kg - Min. 70Kg) allows you to remove the moisture from the honey already extracted -DRY AIR SYSTEM INCLUDING TROLLEY with WHEELS DEHUMIDIFICATION of 12 hours with 40°/45° C of 2% ELECTRONIC REGULATION PANEL with setting of temperature and times DIM. : length. 150 x W. 65 x Height 105cm Weight : about 80 kg Made in Italy
€5,650.00Price
DEHUMIDIFIER FOR HONEY CAPACITY 150 Kg - (Max.180Kg - Min. 70Kg) allows you to remove the moisture from the honey already extracted -DRY AIR SYSTEM INCLUDING TROLLEY with WHEELS DEHUMIDIFICATION of 12 hours with 40°/45° C of 2% ELECTRONIC REGULATION PANEL with setting of temperature and times DIM. : length. 150 x W. 65 x Height 105cm Weight : about 80 kg Made in Italy
DEHUMIDIFIER FOR HONEY CAPACITY 150 Kg - (Max.180Kg - Min. 70Kg) allows you to remove the moisture from the honey already extracted -DRY AIR SYSTEM INCLUDING TROLLEY with WHEELS DEHUMIDIFICATION of 12 hours with 40°/45° C of 2% ELECTRONIC REGULATION PANEL with setting of temperature and times DIM. : length. 150 x W. 65 x Height 105cm Weight : about 80 kg Made in Italy
€75.00Price
MANUAL TRANSMISSION for EXTRACTOR with RELEASE and BRAKE (CE MARK) - ROTATION in ONE DIRECTION ONLY
SET with :
CRANK WITH BAR FOR EXTRACTOR DIAM. 620mm
STEEL GEARS WITH 9 PRINCIPLES
suitable for 16 mm shaft coupling
(SHAFT FOR BASKET NOT INCLUDED)
€75.00Price
MANUAL TRANSMISSION for EXTRACTOR with RELEASE and BRAKE (CE MARK) - ROTATION in ONE DIRECTION ONLY
SET with :
CRANK WITH BAR FOR EXTRACTOR DIAM. 620mm
STEEL GEARS WITH 9 PRINCIPLES
suitable for 16 mm shaft coupling
(SHAFT FOR BASKET NOT INCLUDED)
MANUAL TRANSMISSION for EXTRACTOR with RELEASE and BRAKE (CE MARK) - ROTATION in ONE DIRECTION ONLY
SET with :
CRANK WITH BAR FOR EXTRACTOR DIAM. 620mm
STEEL GEARS WITH 9 PRINCIPLES
suitable for 16 mm shaft coupling
(SHAFT FOR BASKET NOT INCLUDED)
€85.00Price
Plastic trap for the capture of "Aethina Tumida" COMPLETE WITH GRANULES ATTRACTANT - 25-PIECE KIT consisting of:
- n° 25 traps (code LA 8450)
- n° 1 attractant granules with apple cider vinegar essence (code 8452)
to which must be added White* mineral oil, useful for trapping the attracted beetles
To be inserted inside the hive, to be placed at the top, among the honeycombs
€85.00Price
Plastic trap for the capture of "Aethina Tumida" COMPLETE WITH GRANULES ATTRACTANT - 25-PIECE KIT consisting of:
- n° 25 traps (code LA 8450)
- n° 1 attractant granules with apple cider vinegar essence (code 8452)
to which must be added White* mineral oil, useful for trapping the attracted beetles
To be inserted inside the hive, to be placed at the top, among the honeycombs
Plastic trap for the capture of "Aethina Tumida" COMPLETE WITH GRANULES ATTRACTANT - 25-PIECE KIT consisting of:
- n° 25 traps (code LA 8450)
- n° 1 attractant granules with apple cider vinegar essence (code 8452)
to which must be added White* mineral oil, useful for trapping the attracted beetles
To be inserted inside the hive, to be placed at the top, among the honeycombs
€26.00Price
STAINLESS STEEL CROSS BAR for MANUAL "ROTONDA" SERIES honey EXTRACTOR TRANSMISSION Choose the "Rotonda" series honey extractor diameter
€26.00Price
STAINLESS STEEL CROSS BAR for MANUAL "ROTONDA" SERIES honey EXTRACTOR TRANSMISSION Choose the "Rotonda" series honey extractor diameter
STAINLESS STEEL CROSS BAR for MANUAL "ROTONDA" SERIES honey EXTRACTOR TRANSMISSION Choose the "Rotonda" series honey extractor diameter
€29.00Price
CROSS BAR in stainless steel for MANUAL TABLE "ROUND" SERIES EXTRACTOR diameter 370 mm
€29.00Price
CROSS BAR in stainless steel for MANUAL TABLE "ROUND" SERIES EXTRACTOR diameter 370 mm
CROSS BAR in stainless steel for MANUAL TABLE "ROUND" SERIES EXTRACTOR diameter 370 mm
€32.00Price
REINFORCED CROSS BAR in STAINLESS STEEL to mount BAR/ENGINE BLOCK (Cod. QI S86 and QI S122) for "ROTONDA" SERIES EXTRACTOR
Choose the "Rotonda" series honey extractor diameter
€32.00Price
REINFORCED CROSS BAR in STAINLESS STEEL to mount BAR/ENGINE BLOCK (Cod. QI S86 and QI S122) for "ROTONDA" SERIES EXTRACTOR
Choose the "Rotonda" series honey extractor diameter
REINFORCED CROSS BAR in STAINLESS STEEL to mount BAR/ENGINE BLOCK (Cod. QI S86 and QI S122) for "ROTONDA" SERIES EXTRACTOR
Choose the "Rotonda" series honey extractor diameter
€132.00Price
STAINLESS STEEL TANGENTIAL BASKET for D.B. 8 for SUPER and 4 for NEST and 4 LANGSTROTH HONEYCOMB - EXTRACTOR DIAMETER 620 mm - Arrangement for 16 mm shaft
BASKET with 4 POCKETS Dim.: Width 360 mm - Height 455 mm
€132.00Price
STAINLESS STEEL TANGENTIAL BASKET for D.B. 8 for SUPER and 4 for NEST and 4 LANGSTROTH HONEYCOMB - EXTRACTOR DIAMETER 620 mm - Arrangement for 16 mm shaft
BASKET with 4 POCKETS Dim.: Width 360 mm - Height 455 mm
STAINLESS STEEL TANGENTIAL BASKET for D.B. 8 for SUPER and 4 for NEST and 4 LANGSTROTH HONEYCOMB - EXTRACTOR DIAMETER 620 mm - Arrangement for 16 mm shaft
BASKET with 4 POCKETS Dim.: Width 360 mm - Height 455 mm
€900.00Price
D.B. TANGENTIAL EXTRACTOR ELOBA MOTOR 110W/230V with variable speed in both directions for 3 D.B. nest or 6 super honeycombs
With stainless steel basket (Cod. QI C42) - Diam. 525 mm - Nylon cut tap Diam. 40 mm
€900.00Price
D.B. TANGENTIAL EXTRACTOR ELOBA MOTOR 110W/230V with variable speed in both directions for 3 D.B. nest or 6 super honeycombs
With stainless steel basket (Cod. QI C42) - Diam. 525 mm - Nylon cut tap Diam. 40 mm
D.B. TANGENTIAL EXTRACTOR ELOBA MOTOR 110W/230V with variable speed in both directions for 3 D.B. nest or 6 super honeycombs
With stainless steel basket (Cod. QI C42) - Diam. 525 mm - Nylon cut tap Diam. 40 mm
€930.00Price
RADIAL D.B. EXTRACTOR with ELOBA MOTOR 110W/230V with variable speed in both directions
With INOX basket for 9 super honeycombs or (3 nest frames with supplementary cages) - (Basket Cod.Qi C45) - Ø 525 mm - with nylon cut tap Ø 40 mm
€930.00Price
RADIAL D.B. EXTRACTOR with ELOBA MOTOR 110W/230V with variable speed in both directions
With INOX basket for 9 super honeycombs or (3 nest frames with supplementary cages) - (Basket Cod.Qi C45) - Ø 525 mm - with nylon cut tap Ø 40 mm
RADIAL D.B. EXTRACTOR with ELOBA MOTOR 110W/230V with variable speed in both directions
With INOX basket for 9 super honeycombs or (3 nest frames with supplementary cages) - (Basket Cod.Qi C45) - Ø 525 mm - with nylon cut tap Ø 40 mm
€9.50Price
THREAD UNWINDER for 500 g wire spools with fixing on support
€9.50Price
THREAD UNWINDER for 500 g wire spools with fixing on support
THREAD UNWINDER for 500 g wire spools with fixing on support
- -50%
Days
:
Hou
:
Min
:
Sec
Special Offer is Over
- -50%
€6.50Regular price-50%€13.00Price
Days
:
Hou
:
Min
:
Sec
Special Offer is Over
- -50%
