-

-

-

-

Inverter with single-phase inputPump body made of 316L stainless steelFood grade plastic materialRotor made of food grade plastic materialTransported volume per revolution 0.1 litersMaximum pressure 15 barMinimum speed 60 rpmMaximum speed 330 rpmVolume conveyed at maximum speed 1800 liters/hourMechanical widia-widia sealsCoupling nozzles diameter 50 mmTypology of nozzles on requestTotal weight 45 kg DESTINATION OF USE Suitable for conveying: honey, glucose, syrups, jams, marmalades, chocolate, creams, condensed milk and dairy products, mayonnaise, margarine, yogurt, butter, cheese, melted, cream, puree, fruit juice, juice, fruit concentrates and fruit pulp, fruit and vegetable fruit salads, diced tomatoes, vegetable preserves, sauces, starches, vegetable purees, whey, preserves, fats, eggs, wine, gelatin, malt, homogenized food, olive oil, vegetable oils.

Inverter with single-phase inputPump body made of 316L stainless steelFood grade plastic materialRotor made of food grade plastic materialTransported volume per revolution 0.1 litersMaximum pressure 15 barMinimum speed 60 rpmMaximum speed 330 rpmVolume conveyed at maximum speed 1800 liters/hourMechanical widia-widia sealsCoupling nozzles diameter 50 mmTypology of nozzles on requestTotal weight 45 kg DESTINATION OF USE Suitable for conveying: honey, glucose, syrups, jams, marmalades, chocolate, creams, condensed milk and dairy products, mayonnaise, margarine, yogurt, butter, cheese, melted, cream, puree, fruit juice, juice, fruit concentrates and fruit pulp, fruit and vegetable fruit salads, diced tomatoes, vegetable preserves, sauces, starches, vegetable purees, whey, preserves, fats, eggs, wine, gelatin, malt, homogenized food, olive oil, vegetable oils.

Optional variable speed motorization : - ELOBA MOTOR + 550,00€ (QI S86) or - MOTOR REG.ELECTRONIC + 510,00€(QI S134) Extractors "KIT" Free wheel transmission and brake Transparent polycarbonate lids fixed with hinges Transmission holder crossbar and lids, stainless steel Castle in stainless steel or nylon with fiberglass Thrust bearing for shaft in BRONZE Rounded bottom with semi-total discharge Stainless steel full diameter filter Stainless steel tie( art. QI S51-52-S109-S110-S111-S117-S123) Stainless steel ripener 110 kg with tap art. QI R11-stainless steel handles Stainless steel hardware

Optional variable speed motorization : - ELOBA MOTOR + 550,00€ (QI S86) or - MOTOR REG.ELECTRONIC + 510,00€(QI S134) Extractors "KIT" Free wheel transmission and brake Transparent polycarbonate lids fixed with hinges Transmission holder crossbar and lids, stainless steel Castle in stainless steel or nylon with fiberglass Thrust bearing for shaft in BRONZE Rounded bottom with semi-total discharge Stainless steel full diameter filter Stainless steel tie( art. QI S51-52-S109-S110-S111-S117-S123) Stainless steel ripener 110 kg with tap art. QI R11-stainless steel handles Stainless steel hardware

Extractor 2008 SERIES 45/20 radial extractor for 45 Honey super frames or 20 nest frames with electronic programmer, Kw 0.75 230V. IS A NEW SERIES OF EQUIPMENT DESIGNED FOR "MONOBLOCK" HONEY EXTRACTION. In one machine, you have everything you need in a honey extraction room, uncapping ,operculum treatment , accumulation of uncapped combs , honey extraction and decanting of honey. The most obvious advantages are: smaller footprint, convenience in processing steps, with higher yield and reduction of 'inevitable dripping of honey on the floor. The 2008 series is produced in different versions from the hobbyist beekeeper to the professional. The model series 2008/45 professional , the top of the range comes with: a large bench for uncapping , complete with uncapping machine with automatic unloader of combs and accumulator, electronically controlled centrifuge for opercula, a collector for uncapped frames, an extractor of 45 honeycombs D.B. from Honey super or 20 from nest controlled by a sophisticated software that can manage the extraction cycle independently, a decanting tank with filter that can be heated, preparation of pump for transferring honey into containers .

Extractor 2008 SERIES 45/20 radial extractor for 45 Honey super frames or 20 nest frames with electronic programmer, Kw 0.75 230V. IS A NEW SERIES OF EQUIPMENT DESIGNED FOR "MONOBLOCK" HONEY EXTRACTION. In one machine, you have everything you need in a honey extraction room, uncapping ,operculum treatment , accumulation of uncapped combs , honey extraction and decanting of honey. The most obvious advantages are: smaller footprint, convenience in processing steps, with higher yield and reduction of 'inevitable dripping of honey on the floor. The 2008 series is produced in different versions from the hobbyist beekeeper to the professional. The model series 2008/45 professional , the top of the range comes with: a large bench for uncapping , complete with uncapping machine with automatic unloader of combs and accumulator, electronically controlled centrifuge for opercula, a collector for uncapped frames, an extractor of 45 honeycombs D.B. from Honey super or 20 from nest controlled by a sophisticated software that can manage the extraction cycle independently, a decanting tank with filter that can be heated, preparation of pump for transferring honey into containers .

-

-

-

-

-

-

Beehives D.B. 10 Beehives Cube with painted fixed bottom, complete with : Nest with 10 frames mounted drilled and threaded; wooden honeycomb cover with mounted 4-position sheet metal disc; 10-cm-high galvanized sheet metal cover lined with wood; metal door; 3 connection angles; spacers mounted in the nest fixed bottom anti-moth net with galvanized sheet metal bottom removable from the back; 25-mm-thick seasoned fir wood; walls assembled with screws; handles for transport; Frame rest

Beehives D.B. 10 Beehives Cube with painted fixed bottom, complete with : Nest with 10 frames mounted drilled and threaded; wooden honeycomb cover with mounted 4-position sheet metal disc; 10-cm-high galvanized sheet metal cover lined with wood; metal door; 3 connection angles; spacers mounted in the nest fixed bottom anti-moth net with galvanized sheet metal bottom removable from the back; 25-mm-thick seasoned fir wood; walls assembled with screws; handles for transport; Frame rest

Tulle veil to be used in conjunction with beekeeper hat to provide increased ventilation

Tulle veil to be used in conjunction with beekeeper hat to provide increased ventilation

-

-

-

-

-

-

-

-

Preparation of infusion: steep 1 gram of dried leaves in 100 ml of water for a few minutes, then strain. Contraindications: not suitable for children or pregnant women. Avoid for people with bleeding disorders or those taking antiplatelet drugs, as it increases the risk of bleeding.

Preparation of infusion: steep 1 gram of dried leaves in 100 ml of water for a few minutes, then strain. Contraindications: not suitable for children or pregnant women. Avoid for people with bleeding disorders or those taking antiplatelet drugs, as it increases the risk of bleeding.

.

.

-

-

-

-

To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.

To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.

To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.

To make your own beeswax candle you will need: - a silicone mold- a wick of appropriate thickness- a rubber band- a toothpick- silicone (Spray) - optional 1) Preparing the mold:We recommend spraying the mold inside with silicone spray which will make it easier to remove the candle at the end of the process. Insert the wick in the center from the bottom and pop it out from the top. Secure the mold with rubber bands to keep it tightly closed. Tie a wick to the toothpick and rest the latter on the top edge. 2) Fill the mold ocn the wax: Melt the wax in a preferably enameled pot, pour it into the mold when it has reached a temperature of 50°C. Pour it slowly into the mold. The time for the wax to solidify depends on the size of the mold and the amount of wax used. 3) Take the candle out of the mold:When the wax is cold, remove the rubber bands, open the mold and take out the candle. Remove the toothpick and cut the wick at the base of the candle, while on the top leave the wick 1 cm long. Spray the candle with silicone spray to give it shine.

Its active ingredients are:arnica, a plant attributed with anti-inflammatory, anti-edematous, antitraumatic, anti-rheumatic, analgesic, antineuralgic, revulsive, and antiseptic properties. It is therefore used in post-traumatic edema (fractures, sprains, bruises, contusions, compressions, hematomas, muscle tears, fracture edema), arthralgias and joint disorders of a rheumatic nature, joint effusions and non-ulcerative phlebitis). Arnica is widely used in the formulation of sports massage products.Camphor, red chili pepper, rosemary and mustard, in small amounts, have an invigorating, that is, warming and stimulating effect on the microcirculation for the drainage of inflammatory metabolites.St. John's Wort, with its known antineuralgic and pain-relieving properties. Contains:Arnica, camphor, lanolin, extra virgin olive oil, cera alba, abbies alba, bryony, capsicum, helichrysum, St. John's Wort, lavender, rosemary, mustard and other medicinal herbs. Ingredients:Olea europea - Lanolin - Cocus nucifera oil - Cera alba - Camphor - Lavandula angustifolia - Abies alba - Arnica montana - Calendula officinalis - Capsicum frutescens - Helichrysum italicum - Hypericum perforatum - Rosmarinus officinalis - Sinapis nigra.

Its active ingredients are:arnica, a plant attributed with anti-inflammatory, anti-edematous, antitraumatic, anti-rheumatic, analgesic, antineuralgic, revulsive, and antiseptic properties. It is therefore used in post-traumatic edema (fractures, sprains, bruises, contusions, compressions, hematomas, muscle tears, fracture edema), arthralgias and joint disorders of a rheumatic nature, joint effusions and non-ulcerative phlebitis). Arnica is widely used in the formulation of sports massage products.Camphor, red chili pepper, rosemary and mustard, in small amounts, have an invigorating, that is, warming and stimulating effect on the microcirculation for the drainage of inflammatory metabolites.St. John's Wort, with its known antineuralgic and pain-relieving properties. Contains:Arnica, camphor, lanolin, extra virgin olive oil, cera alba, abbies alba, bryony, capsicum, helichrysum, St. John's Wort, lavender, rosemary, mustard and other medicinal herbs. Ingredients:Olea europea - Lanolin - Cocus nucifera oil - Cera alba - Camphor - Lavandula angustifolia - Abies alba - Arnica montana - Calendula officinalis - Capsicum frutescens - Helichrysum italicum - Hypericum perforatum - Rosmarinus officinalis - Sinapis nigra.

The knives are heated via a hot water heating and recycling unit (included with the machine), and the temperature of the knives can be adjusted via a special thermostat. The knives also work inside the wooden frame of the honeycombs and thus can uncapping even unfilled frames. Adjustment of the knives is quick and easy via a lever on the side of the uncapping machine that allows the passage between the knives to be tightened or widened. Manually introduced combs are guided and inserted, automatically between the blades in order to achieve smooth and systematic uncapping on both sides. Following the uncapping process, the frames are stored by sliding on the frame. An uncapping bench can be placed under the frame as in the photo (the length of the frame varies according to the length of the bench). The direct melter is equipped with a dual control (one for controlling the temperature of the honey, and the other for adjusting the temperature of the operculum melt) and dual discharge (one dedicated to honey and the other for wax discharge). The machine is equipped with a simple and functional control panel. And it is built with a double heated chamber. Following careful analysis and evaluation, the use of heat to melt the wax does not alter the freshness index of the honey and its state of preservation. Therefore, it was found that, in the honeys of the fondicera, the recorded HFM values are far below the threshold stipulated by the relevant regulations (L.D. No.179/2004). See attached report for further information. Uncapping capacity: about 11 frames/minute. Knife temperature: via thermostat from 30° C to 90° C. Power supply: 220 V (also possible in 380 V) Absorption: 8.8 KW **MACHINE PRODUCED FOR DADANT BLATT CANVAS.

The knives are heated via a hot water heating and recycling unit (included with the machine), and the temperature of the knives can be adjusted via a special thermostat. The knives also work inside the wooden frame of the honeycombs and thus can uncapping even unfilled frames. Adjustment of the knives is quick and easy via a lever on the side of the uncapping machine that allows the passage between the knives to be tightened or widened. Manually introduced combs are guided and inserted, automatically between the blades in order to achieve smooth and systematic uncapping on both sides. Following the uncapping process, the frames are stored by sliding on the frame. An uncapping bench can be placed under the frame as in the photo (the length of the frame varies according to the length of the bench). The direct melter is equipped with a dual control (one for controlling the temperature of the honey, and the other for adjusting the temperature of the operculum melt) and dual discharge (one dedicated to honey and the other for wax discharge). The machine is equipped with a simple and functional control panel. And it is built with a double heated chamber. Following careful analysis and evaluation, the use of heat to melt the wax does not alter the freshness index of the honey and its state of preservation. Therefore, it was found that, in the honeys of the fondicera, the recorded HFM values are far below the threshold stipulated by the relevant regulations (L.D. No.179/2004). See attached report for further information. Uncapping capacity: about 11 frames/minute. Knife temperature: via thermostat from 30° C to 90° C. Power supply: 220 V (also possible in 380 V) Absorption: 8.8 KW **MACHINE PRODUCED FOR DADANT BLATT CANVAS.

-

-

-

-

-

-

-

-